ZYZhenyu Yu

Zhenyu Yu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zhenyu Yu has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Study on biomass adsorption‐enhanced steam gasification for hydrogen production based on dual‐effect catalyst

    by Huaqing Xie, Mengxin Qin, Zhenyu Yu, Kun Wang, Rui Guo, Zhengri Shao, Xi Zhao, Rongquan Li

    In this study, in order to achieve CO2 capture under high‐temperature conditions and obtain hydrogen from biomass, a dual‐effect catalyst Ni(x)‐Na2ZrO3, possessing both catalytic and high‐temperature CO2 adsorption capabilities, was prepared and applied in the biomass steam reforming reaction. The investigation focused on the impact of gasification temperature, steam to carbon (S/C) ratio, and Ni loading ratio on the production of hydrogen‐rich syngas via biomass enhanced steam gasification over the catalysts. By thermogravimetric analysis, the catalyst exhibited a remarkable high‐temperature CO2 adsorption capability at 900°C and cyclic stability. The orthogonal experiment was conducted for the reaction characteristics of the biomass adsorption‐enhanced steam gasification over the dual‐effect Ni(x)‐Na2ZrO3 catalyst. Through the analysis of the fitting formula, the catalyst successfully demonstrated promotional effect on the biomass reforming reaction. When the gasification temperature was 950°C, S/C ratio was 9 and Ni loading ratio was 7.7 wt%, the hydrogen yield reached 0.95 m3/kg, and carbon deposition rate was almost 0.


  • Open Access

    Two-Stage Dry Reforming Process for Biomass Gasification: Product Characteristics and Energy Analysis

    by Yang Gao, Huaqing Xie, Zhenyu Yu, Mengxin Qin, Zhenguo Wu, Panlei Wang, Xi Zhao, Shiyi Zhang

    The utilization of biomass can not only alleviate the energy crisis but also reduce the pollution of fossil fuels to the environment. Biomass gasification is one of the main utilization methods, which can effectively convert biomass into high-value and wide-use gasification gas. However, this process inevitably produces the by-product tar, which affects the yield of syngas. In order to solve this problem, a two-stage process combining biomass pyrolysis and CO2 catalytic reforming is proposed in this paper, which is used to prepare high calorific value syngas rich in H2 and CO and reduce the by-product tar of biomass gasification while realizing the resource utilization of CO2. The effects of the reforming temperature and CO2/C ratio on the gas yield and calorific value of biomass were investigated by catalytic gasification reforming device, and the system energy consumption was analyzed. With the increase of reforming temperature, the yield of CO increased, and the yield of H2 and the calorific value of gas increased first and then decreased. Increasing the CO2/C ratio within a proper range is beneficial to the formation of syngas. When the reforming temperature is 900 °C and the CO2/C ratio is 1, syngas with a high gas calorific value is obtained, which of is 2.75 MJ/kg is obtained. At this time, the yield of H2 and CO reached the maximums, which were 0.46 Nm3/kg and 0.28 Nm3/kg, respectively. Under these conditions, the total energy consumption of the system is 0.68 MJ/kg, slightly more than 0, and does not require too much external heat.


  • Open Access

    Thermodynamic Analysis of Iron Ore Sintering Process Based on Biomass Carbon

    by Mi Zhou, Zhenyu Yu, Panlei Wang, Huaqing Xie, Yongcai Wen, Jianming Li

    The sinter process of iron ore with biomass carbon instead of coke breeze as fuel was investigated via thermodynamic analysis in this paper through a comparison of sinter composition indexes, metallurgical properties, and pollutant emissions. Straw charcoal was used in this paper, and its replacement does not adversely affect the composition index of iron ore, namely Fe, FeO, basicity, S, nor the metallurgical properties, namely reduction degradation index and reduction index. However, the replacement has a great effect on the emissions of pollutant gases, including SO2, NOx, CO, and CO2. The thermodynamic analysis result shows that emissions of pollutant gases produced in the sinter process significantly decrease by using straw charcoal instead of coke breeze in sinter. The sintering maximum temperature has a great influence on sintering technical indicators. The best sintering maximum temperature is between 1300 and 1400 °C, where sinter ore with high quality can be obtained.