Davide Nodari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Davide Nodari has a total of 87 co-authors. Here are the top co-authors by number of shared publications:
- Nicola Gasparini
Department of Chemistry and Centre for Processable Electronics Imperial College London London UK
10 shared publications - Martin Heeney
Division of Physical Sciences & Engineering Chemistry Program King Abdullah University of Science and Technology (KAUST) Thuwal Saudi Arabia
4 shared publications - Francesco Furlan
Department of Materials Imperial College London London UK
3 shared publications - Martina Rimmele
Department of Chemistry and Centre for Processable Electronics, Imperial College London, London W12 0BZ, UK
3 shared publications Adam V. Marsh
Division of Physical Sciences & Engineering Chemistry Program King Abdullah University of Science and Technology (KAUST) Thuwal Saudi Arabia
2 shared publicationsAniket Rana
Department of Chemistry and Centre for Processable Electronics, Imperial College London, London, UK
2 shared publications
Latest Publications
- Open Access
- 13 October 2026
- Published by Wiley in Advanced Materials
- p. e75160
Ferrocene‐Based Self‐Assembled Monolayers Enable Ultra‐High Specific Detectivity in Perovskite Photodetectors
Molecular design of self‐assembled monolayers (SAMs) for perovskite photodetector (PD) applications has largely been inherited from photovoltaics, where molecules have been designed to maximize charge extraction rather than to minimize dark current density ( J d ). Here, we move beyond conventional carbazole‐core SAMs and introduce ferrocene (Fc)‐based SAMs (Fc‐SAMs) as hole transport layers specifically designed for PD operation. These Fc‐SAMs enable a unique energy alignment strategy where the work function of ITO is modified to misalign with the valence band maximum of an adjacent metal halide perovskite. In doing so, interfacial band bending is reduced, suppressing thermally activated charge injection. Simultaneously, the Fc moiety passivates interfacial defects, lowering defect density two‐fold when compared to a benchmark SAM. These effects enable an ultralow J d of 2.52 × 10 −10 A cm −2 and a noise current of 3.80 × 10 −15 A Hz −1/2 , which generates a state‐of‐the‐art specific detectivity ( D *) of 2.56 × 10 13 Jones at 680 nm and −0.5 V. We also establish that Fc‐SAM performance is independent of alkyl chain length (0 ≤ n ≤ 6), contrasting established SAM design rules. Moreover, Fc‐SAM devices exhibit excellent operational stability, supporting LiFi communication rates exceeding 1 Mbps and highlighting their potential for commercial optoelectronic applications.
- 13 October 2026
- Published by Wiley in Advanced Materials
- p. e75160
Open AccessFerrocene‐Based Self‐Assembled Monolayers Enable Ultra‐High Specific Detectivity in Perovskite Photodetectors
Molecular design of self‐assembled monolayers (SAMs) for perovskite photodetector (PD) applications has largely been inherited from photovoltaics, where molecules have been designed to maximize charge extraction rather than to minimize dark current density ( J d ). Here, we move beyond conventional carbazole‐core SAMs and introduce ferrocene (Fc)‐based SAMs (Fc‐SAMs) as hole transport layers specifically designed for PD operation. These Fc‐SAMs enable a unique energy alignment strategy where the work function of ITO is modified to misalign with the valence band maximum of an adjacent metal halide perovskite. In doing so, interfacial band bending is reduced, suppressing thermally activated charge injection. Simultaneously, the Fc moiety passivates interfacial defects, lowering defect density two‐fold when compared to a benchmark SAM. These effects enable an ultralow J d of 2.52 × 10 −10 A cm −2 and a noise current of 3.80 × 10 −15 A Hz −1/2 , which generates a state‐of‐the‐art specific detectivity ( D *) of 2.56 × 10 13 Jones at 680 nm and −0.5 V. We also establish that Fc‐SAM performance is independent of alkyl chain length (0 ≤ n ≤ 6), contrasting established SAM design rules. Moreover, Fc‐SAM devices exhibit excellent operational stability, supporting LiFi communication rates exceeding 1 Mbps and highlighting their potential for commercial optoelectronic applications.
- Open Access
- 18 August 2026
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (16) , 5514-5526
Aqueous preparation of CsPbBr 3 perovskite nanocrystals under ambient conditions
We introduce an aqueous synthetic route for the preparation of size-controlled perovskite nanocrystals under ambient conditions.
- 18 August 2026
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 19 (16) , 5514-5526
Open AccessAqueous preparation of CsPbBr 3 perovskite nanocrystals under ambient conditions
We introduce an aqueous synthetic route for the preparation of size-controlled perovskite nanocrystals under ambient conditions.
- 15 July 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (47) , e21122
A Quinoidal J‐Aggregated Indacendiselenophene Exhibiting High Responsivity in Ultra‐Narrowband Organic Photodetection
Organic semiconductors that exhibit narrowband absorption in the near‐infrared (NIR) region are highly sought after for photodetector applications, yet achieving such behavior intrinsically remains a considerable challenge. We report a novel fused quinoidal tetracyanoindacenodiselenophene material (QIDSe‐C16) that forms solid‐state J‐aggregates producing a remarkably sharp absorption band with a full width at half‐maximum (FWHM) of 27 nm centred at 772 nm, closely matching that of its sulfur analogue (QIDT‐C16). Despite exhibiting similar optical and electrochemical characteristics, selenium substitution enhances charge‐carrier mobility and significantly improves device performance. Optimized organic phototransistors (OPTs) based on QIDSe‐C16 display ambipolar transport and excellent photoresponsivity, reaching 289 A W −1 at 780 nm illumination, which is an order of magnitude higher than QIDT‐C16‐based devices and among the best so‐far reported values. Our findings demonstrate that controlling solid‐state aggregation through heteroatom engineering offers an effective route to narrowband, filter‐free NIR photodetectors that combine spectral selectivity with high charge transport.
- 15 July 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (47) , e21122
A Quinoidal J‐Aggregated Indacendiselenophene Exhibiting High Responsivity in Ultra‐Narrowband Organic Photodetection
Organic semiconductors that exhibit narrowband absorption in the near‐infrared (NIR) region are highly sought after for photodetector applications, yet achieving such behavior intrinsically remains a considerable challenge. We report a novel fused quinoidal tetracyanoindacenodiselenophene material (QIDSe‐C16) that forms solid‐state J‐aggregates producing a remarkably sharp absorption band with a full width at half‐maximum (FWHM) of 27 nm centred at 772 nm, closely matching that of its sulfur analogue (QIDT‐C16). Despite exhibiting similar optical and electrochemical characteristics, selenium substitution enhances charge‐carrier mobility and significantly improves device performance. Optimized organic phototransistors (OPTs) based on QIDSe‐C16 display ambipolar transport and excellent photoresponsivity, reaching 289 A W −1 at 780 nm illumination, which is an order of magnitude higher than QIDT‐C16‐based devices and among the best so‐far reported values. Our findings demonstrate that controlling solid‐state aggregation through heteroatom engineering offers an effective route to narrowband, filter‐free NIR photodetectors that combine spectral selectivity with high charge transport.
- Open Access
- 26 November 2025
- Published by Springer Nature in Nature Photonics
- Vol. 19 (12) , 1361-1366
Electrical control of photon spin angular momentum in organic electroluminescent materials
The photon spin information encoded in circularly polarized (CP) light is of high interest for current and future technologies, including low-power displays, encrypted communications and high-performance quantum applications. Engineering organic light-emitting diodes (LED) to emit oppositely handed electroluminescent CP light typically requires access to left- and right-handed chiral molecules. In conjugated polymer LEDs, the handedness of CP electroluminescence also depends on the active-layer thickness or direction of current flow. For a given active-layer thickness, it remains unknown whether a single-handed chiral material can emit CP light with opposite handedness in the same LED architecture. Here we demonstrate organic LEDs in which the handedness of the emitted CP electroluminescence can be controlled electrically, solely by using specific interlayers with no change in the emissive material composition or thickness. We reveal that this occurs due to a change in mechanism for the generation of CP electroluminescence, as a function of the recombination zone position within the device. This result provides a paradigm shift in the realization of organic CP-LEDs with controllable spin angular momentum information and further contributes to ongoing discussions relating the fundamental physics of chiral optoelectronics.
- 26 November 2025
- Published by Springer Nature in Nature Photonics
- Vol. 19 (12) , 1361-1366
Open AccessElectrical control of photon spin angular momentum in organic electroluminescent materials
The photon spin information encoded in circularly polarized (CP) light is of high interest for current and future technologies, including low-power displays, encrypted communications and high-performance quantum applications. Engineering organic light-emitting diodes (LED) to emit oppositely handed electroluminescent CP light typically requires access to left- and right-handed chiral molecules. In conjugated polymer LEDs, the handedness of CP electroluminescence also depends on the active-layer thickness or direction of current flow. For a given active-layer thickness, it remains unknown whether a single-handed chiral material can emit CP light with opposite handedness in the same LED architecture. Here we demonstrate organic LEDs in which the handedness of the emitted CP electroluminescence can be controlled electrically, solely by using specific interlayers with no change in the emissive material composition or thickness. We reveal that this occurs due to a change in mechanism for the generation of CP electroluminescence, as a function of the recombination zone position within the device. This result provides a paradigm shift in the realization of organic CP-LEDs with controllable spin angular momentum information and further contributes to ongoing discussions relating the fundamental physics of chiral optoelectronics.
- 4 August 2025
- Published by Springer Nature in Nature Reviews Materials
- Vol. 10 (11) , 842-856
Towards high and reliable specific detectivity in visible and infrared perovskite and organic photodiodes
- 4 August 2025
- Published by Springer Nature in Nature Reviews Materials
- Vol. 10 (11) , 842-856
Towards high and reliable specific detectivity in visible and infrared perovskite and organic photodiodes
- Open Access
- 13 June 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-10
Octupole moment driven free charge generation in partially chlorinated subphthalocyanine for planar heterojunction organic photodetectors
In this study, high-performance organic photodetectors are presented which utilize a pristine chlorinated subphthalocyanine photoactive layer. Optical and optoelectronic analyses indicate that the device photocurrent is primarily generated through direct charge generation within the chlorinated subphthalocyanine layer, rather than exciton separation at layer interfaces. Molecular modelling suggests that this direct charge generation is facilitated by chlorinated subphthalocyanine high octupole moment (−80 DÅ2), which generates a 200 meV shift in molecular energetics. Increasing the thickness of chlorinated subphthalocyanine leads to faster response time, correlated with a decrease in trap density. Notably, photodetectors with a 50 nm thick chlorinated subphthalocyanine photoactive layer exhibit detectivities approaching 1013 Jones, with a dark current below 10−7 A cm−2 up to −5 V. Based on these findings, we conclude that high octupole moment molecular semiconductors are promising materials for high-performance organic photodetectors employing single-component photoactive layer.
- 13 June 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-10
Open AccessOctupole moment driven free charge generation in partially chlorinated subphthalocyanine for planar heterojunction organic photodetectors
In this study, high-performance organic photodetectors are presented which utilize a pristine chlorinated subphthalocyanine photoactive layer. Optical and optoelectronic analyses indicate that the device photocurrent is primarily generated through direct charge generation within the chlorinated subphthalocyanine layer, rather than exciton separation at layer interfaces. Molecular modelling suggests that this direct charge generation is facilitated by chlorinated subphthalocyanine high octupole moment (−80 DÅ2), which generates a 200 meV shift in molecular energetics. Increasing the thickness of chlorinated subphthalocyanine leads to faster response time, correlated with a decrease in trap density. Notably, photodetectors with a 50 nm thick chlorinated subphthalocyanine photoactive layer exhibit detectivities approaching 1013 Jones, with a dark current below 10−7 A cm−2 up to −5 V. Based on these findings, we conclude that high octupole moment molecular semiconductors are promising materials for high-performance organic photodetectors employing single-component photoactive layer.
- Open Access
- 6 May 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (28) , e2402568
Conjugated Polymer Heteroatom Engineering Enables High Detectivity Symmetric Ambipolar Phototransistors
Solution‐processed high‐performing ambipolar organic phototransistors (OPTs) can enable low‐cost integrated circuits. Here, a heteroatom engineering approach to modify the electron affinity of a low band gap diketopyrrolopyrole (DPP) co‐polymer, resulting in well‐balanced charge transport, a more preferential edge‐on orientation and higher crystallinity, is demonstrated. Changing the comonomer heteroatom from sulfur (benzothiadiazole (BT)) to oxygen (benzooxadiazole (BO)) leads to an increased electron affinity and introduces higher ambipolarity. Organic thin film transistors fabricated from the novel PDPP‐BO exhibit charge carrier mobility of 0.6 and 0.3 cm2 Vs⁻1 for electrons and holes, respectively. Due to the high sensitivity of the PDPP‐based material and the balanced transport in PDPP‐BO, its application as an NIR detector in an OPT architecture is presented. By maintaining a high on/off ratio (9 × 104), ambipolar OPTs are shown with photoresponsivity of 69 and 99 A W⁻1 and specific detectivity of 8 × 107 for the p‐type operation and 4 × 109 Jones for the n‐type regime. The high symmetric NIR‐ambipolar OPTs are also evaluated as ambipolar photo‐inverters, and show a 46% gain enhancement under illumination.
- 6 May 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (28) , e2402568
Open AccessConjugated Polymer Heteroatom Engineering Enables High Detectivity Symmetric Ambipolar Phototransistors
Solution‐processed high‐performing ambipolar organic phototransistors (OPTs) can enable low‐cost integrated circuits. Here, a heteroatom engineering approach to modify the electron affinity of a low band gap diketopyrrolopyrole (DPP) co‐polymer, resulting in well‐balanced charge transport, a more preferential edge‐on orientation and higher crystallinity, is demonstrated. Changing the comonomer heteroatom from sulfur (benzothiadiazole (BT)) to oxygen (benzooxadiazole (BO)) leads to an increased electron affinity and introduces higher ambipolarity. Organic thin film transistors fabricated from the novel PDPP‐BO exhibit charge carrier mobility of 0.6 and 0.3 cm2 Vs⁻1 for electrons and holes, respectively. Due to the high sensitivity of the PDPP‐based material and the balanced transport in PDPP‐BO, its application as an NIR detector in an OPT architecture is presented. By maintaining a high on/off ratio (9 × 104), ambipolar OPTs are shown with photoresponsivity of 69 and 99 A W⁻1 and specific detectivity of 8 × 107 for the p‐type operation and 4 × 109 Jones for the n‐type regime. The high symmetric NIR‐ambipolar OPTs are also evaluated as ambipolar photo‐inverters, and show a 46% gain enhancement under illumination.
- Open Access
- 4 December 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-10
Operando dynamics of trapped carriers in perovskite solar cells observed via infrared optical activation spectroscopy
Conventional spectroscopies are not sufficiently selective to comprehensively understand the behaviour of trapped carriers in perovskite solar cells, particularly under their working conditions. Here we use infrared optical activation spectroscopy (i.e., pump-push-photocurrent), to observe the properties and real-time dynamics of trapped carriers within operando perovskite solar cells. We compare behaviour differences of trapped holes in pristine and surface-passivated FA0.99Cs0.01PbI3 devices using a combination of quasi-steady-state and nanosecond time-resolved pump-push-photocurrent, as well as kinetic and drift-diffusion models. We find a two-step trap-filling process: the rapid filling (~10 ns) of low-density traps in the bulk of perovskite, followed by the slower filling (~100 ns) of high-density traps at the perovskite/hole transport material interface. Surface passivation by n-octylammonium iodide dramatically reduces the number of trap states (~50 times), improving the device performance substantially. Moreover, the activation energy (~280 meV) of the dominant hole traps remains similar with and without surface passivation.
- 4 December 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-10
Open AccessOperando dynamics of trapped carriers in perovskite solar cells observed via infrared optical activation spectroscopy
Conventional spectroscopies are not sufficiently selective to comprehensively understand the behaviour of trapped carriers in perovskite solar cells, particularly under their working conditions. Here we use infrared optical activation spectroscopy (i.e., pump-push-photocurrent), to observe the properties and real-time dynamics of trapped carriers within operando perovskite solar cells. We compare behaviour differences of trapped holes in pristine and surface-passivated FA0.99Cs0.01PbI3 devices using a combination of quasi-steady-state and nanosecond time-resolved pump-push-photocurrent, as well as kinetic and drift-diffusion models. We find a two-step trap-filling process: the rapid filling (~10 ns) of low-density traps in the bulk of perovskite, followed by the slower filling (~100 ns) of high-density traps at the perovskite/hole transport material interface. Surface passivation by n-octylammonium iodide dramatically reduces the number of trap states (~50 times), improving the device performance substantially. Moreover, the activation energy (~280 meV) of the dominant hole traps remains similar with and without surface passivation.
- Open Access
- 12 October 2023
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (6)
Remarkable Isomer Effect on the Performance of Fully Non‐Fused Non‐Fullerene Acceptors in Near‐Infrared Organic Photodetectors
Two fully non‐fused small‐molecule acceptors BTIC‐1 and BTIC‐2 are reported for application in near‐infrared organic photodetectors (NIR OPDs). Both acceptors contain the same conjugated backbone but differing sidechain regiochemistry, affording significant differences in their optical properties. The head‐to‐head arrangement of BTIC‐2 results in a reduction of optical band gap of 0.17 eV compared to BTIC‐1, which contains a head‐to‐tail arrangement, with absorption spanning the visible and near‐IR regions up to 900 nm. These differences are rationalized on the basis of non‐covalent intramolecular interactions facilitating a more co‐planar conformation for BTIC‐2. OPDs based on PM6:BTIC‐2 deliver a low dark current density of 2.4 × 10−7 A cm−2, leading to a superior specific detectivity of 1.7 × 1011 Jones at 828 nm at ‐2 V. The optimized device exhibits an ultrafast photo response of 2.6 µs and a high ‐3 dB cut‐off frequency of 130 kHz. This work demonstrates that fully non‐fused small‐molecule acceptors offer competitive device performance for NIR OPDs compared to fused‐ring electron acceptors, but with reduced synthetic complexity. Furthermore, the study presents an efficient strategy to enhance device performance by varying conformational locks.
- 12 October 2023
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (6)
Open AccessRemarkable Isomer Effect on the Performance of Fully Non‐Fused Non‐Fullerene Acceptors in Near‐Infrared Organic Photodetectors
Two fully non‐fused small‐molecule acceptors BTIC‐1 and BTIC‐2 are reported for application in near‐infrared organic photodetectors (NIR OPDs). Both acceptors contain the same conjugated backbone but differing sidechain regiochemistry, affording significant differences in their optical properties. The head‐to‐head arrangement of BTIC‐2 results in a reduction of optical band gap of 0.17 eV compared to BTIC‐1, which contains a head‐to‐tail arrangement, with absorption spanning the visible and near‐IR regions up to 900 nm. These differences are rationalized on the basis of non‐covalent intramolecular interactions facilitating a more co‐planar conformation for BTIC‐2. OPDs based on PM6:BTIC‐2 deliver a low dark current density of 2.4 × 10−7 A cm−2, leading to a superior specific detectivity of 1.7 × 1011 Jones at 828 nm at ‐2 V. The optimized device exhibits an ultrafast photo response of 2.6 µs and a high ‐3 dB cut‐off frequency of 130 kHz. This work demonstrates that fully non‐fused small‐molecule acceptors offer competitive device performance for NIR OPDs compared to fused‐ring electron acceptors, but with reduced synthetic complexity. Furthermore, the study presents an efficient strategy to enhance device performance by varying conformational locks.
- Open Access
- 15 September 2023
- Published by Springer Nature in Research Square
Octupole Moment Driven Free Charge Generation in Partially Chlorinated Subphthalocyanine for Planar Heterojunction Organic Photodetectors
In this study, high-performance organic photodetectors (OPDs) are presented which utilize a pristine chlorinated subphthalocyanine (Cl6-SubPc) photoactive layer. Optical and optoelectronic analyses indicate that the device photocurrent is primarily generated through direct charge generation within the Cl6-SubPc layer, rather than exciton separation at layer interfaces. Molecular modelling suggests that this direct charge generation is facilitated by Cl6-SubPc’s high octupole moment (-80 DÅ2), which generates a 200 meV shift in molecular energetics. Increasing the thickness of Cl6-SubPc leads to faster OPD response times, correlated with a decrease in trap density. Notably, PHJ OPDs with a 50 nm thick Cl6-SubPc photoactive layer exhibit detectivities approaching 1013 Jones, with a dark current below 10− 7 A cm− 2 up to -5 V. Based on these findings, we conclude that Cl6-SubPc is a promising material for high-performance OPDs employing a single-component photoactive layer.
- 15 September 2023
- Published by Springer Nature in Research Square
Open AccessOctupole Moment Driven Free Charge Generation in Partially Chlorinated Subphthalocyanine for Planar Heterojunction Organic Photodetectors
In this study, high-performance organic photodetectors (OPDs) are presented which utilize a pristine chlorinated subphthalocyanine (Cl6-SubPc) photoactive layer. Optical and optoelectronic analyses indicate that the device photocurrent is primarily generated through direct charge generation within the Cl6-SubPc layer, rather than exciton separation at layer interfaces. Molecular modelling suggests that this direct charge generation is facilitated by Cl6-SubPc’s high octupole moment (-80 DÅ2), which generates a 200 meV shift in molecular energetics. Increasing the thickness of Cl6-SubPc leads to faster OPD response times, correlated with a decrease in trap density. Notably, PHJ OPDs with a 50 nm thick Cl6-SubPc photoactive layer exhibit detectivities approaching 1013 Jones, with a dark current below 10− 7 A cm− 2 up to -5 V. Based on these findings, we conclude that Cl6-SubPc is a promising material for high-performance OPDs employing a single-component photoactive layer.