Eva Forsten
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Eva Forsten has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Jochen Büchs
Chair of Biochemical Engineering (AVT.BioVT), RWTH Aachen University, Aachen, Germany
6 shared publications - Jørgen Barsett Magnus
AVT – Biochemical Engineering RWTH Aachen University Aachen Germany
4 shared publications - Luca Antonia Grebe
RWTH Aachen University
2 shared publications - Alexander Deitert
Institute of Applied Microbiology – iAMB, Aachen Biology and Biotechnology – ABBt, Worringer Weg 1, RWTH Aachen University, D-52074, Aachen, Germany
1 shared publication - Anna-Lena Kuhn
AVT- Biochemical Engineering, RWTH Aachen University, Aachen, Germany
1 shared publication - Aylin Sara Genis
Institute for Microbiology and Biotechnology, University of Bonn, Bonn, Germany
1 shared publication
Latest Publications
- Open Access
- 18 April 2025
- Published by Springer Nature in Bioprocess and Biosystems Engineering
- Vol. 48 (6) , 1007-1024
Small-scale fed-batch cultivations of Vibrio natriegens: overcoming challenges for early process development
Vibrio natriegens is a fast-growing microbial workhorse with high potential for biotechnological applications. However, handling the bacterium in batch processes is challenging due to its high overflow metabolism and mixed acid formation under microaerobic conditions. For early process development, technologies enabling small-scale fed-batch cultivation of V. natriegens Vmax are needed. In this study, fed-batch cultivations in 96-well microtiter plates were successfully online-monitored for the first time with a µTOM device. Using the online-monitored oxygen transfer rate, a scale up to membrane-based fed-batch shake flasks was performed. The overflow metabolism was efficiently minimized by choosing suitable feed rates, and mixed acid formation was prevented. A glucose soft sensor using the oxygen transfer rate provided accurate estimates of glucose consumption throughout the fermentation, eliminating the need for offline sampling. Analyzing the impact of the inducer IPTG on the recombinant production of the enzyme inulosucrase revealed concentration-dependent effects in batch processes. In contrast, fed-batch operating mode resulted in high inulosucrase activity even without induction. Overall, an inulosucrase titer of 80 U/mL was achieved. In conclusion, the advantages of small-scale fed-batch technologies supported by a glucose soft sensor have been demonstrated for early process development for V. natriegens Vmax.
- 18 April 2025
- Published by Springer Nature in Bioprocess and Biosystems Engineering
- Vol. 48 (6) , 1007-1024
Open AccessSmall-scale fed-batch cultivations of Vibrio natriegens: overcoming challenges for early process development
Vibrio natriegens is a fast-growing microbial workhorse with high potential for biotechnological applications. However, handling the bacterium in batch processes is challenging due to its high overflow metabolism and mixed acid formation under microaerobic conditions. For early process development, technologies enabling small-scale fed-batch cultivation of V. natriegens Vmax are needed. In this study, fed-batch cultivations in 96-well microtiter plates were successfully online-monitored for the first time with a µTOM device. Using the online-monitored oxygen transfer rate, a scale up to membrane-based fed-batch shake flasks was performed. The overflow metabolism was efficiently minimized by choosing suitable feed rates, and mixed acid formation was prevented. A glucose soft sensor using the oxygen transfer rate provided accurate estimates of glucose consumption throughout the fermentation, eliminating the need for offline sampling. Analyzing the impact of the inducer IPTG on the recombinant production of the enzyme inulosucrase revealed concentration-dependent effects in batch processes. In contrast, fed-batch operating mode resulted in high inulosucrase activity even without induction. Overall, an inulosucrase titer of 80 U/mL was achieved. In conclusion, the advantages of small-scale fed-batch technologies supported by a glucose soft sensor have been demonstrated for early process development for V. natriegens Vmax.
- Open Access
- 13 December 2024
- Published by Wiley in Biotechnology Progress
- Vol. 41 (2) , e3525
High‐sensitivity real‐time monitoring of pH and respiration activity unveils metabolic dynamics in shake flask cultures
Erlenmeyer shake flasks are widely used during the first steps of bioprocess development. Despite their broad application in academia and industry, shake flasks usually lack standardized and user‐friendly online monitoring techniques. In this work, the pH and Respiratory Activity MOnitoring System (pH‐RAMOS) for the non‐invasive online measurement of the oxygen transfer rate (OTR), carbon dioxide transfer rate (CTR), and pH in up to eight parallel shake flasks under sterile conditions is presented. The OTR and CTR are quasi‐continuously measured in the headspace of the shake flasks using dedicated oxygen and carbon dioxide sensors, enabling precise respiratory quotient (RQ) evaluation. Self‐adhesive pH sensor spots are used for the high‐frequent real‐time pH monitoring of the culture. These prototype pH sensor spots stand out due to their simple sterilizability and subsequent one‐point calibration in the cultivation medium. The long‐term stability of the pH sensor spots was assessed in a 28‐day long abiotic experiment. The novel pH‐RAMOS was validated with different eukaryotic and prokaryotic microorganisms, such as Ogataea polymorpha, Ustilago trichophora, and Vibrio natriegens. The combination of online OTR, CTR, RQ, and pH signals allowed for identifying various metabolic phenomena, such as oxygen limitations, substrate limitations, diauxies, and the production or consumption of specific compounds, based on their degree of reduction or change of pH. The high‐frequent and sensitive pH‐monitoring was particularly advantageous for registering subtle and transient metabolic phenomena.
- 13 December 2024
- Published by Wiley in Biotechnology Progress
- Vol. 41 (2) , e3525
Open AccessHigh‐sensitivity real‐time monitoring of pH and respiration activity unveils metabolic dynamics in shake flask cultures
Erlenmeyer shake flasks are widely used during the first steps of bioprocess development. Despite their broad application in academia and industry, shake flasks usually lack standardized and user‐friendly online monitoring techniques. In this work, the pH and Respiratory Activity MOnitoring System (pH‐RAMOS) for the non‐invasive online measurement of the oxygen transfer rate (OTR), carbon dioxide transfer rate (CTR), and pH in up to eight parallel shake flasks under sterile conditions is presented. The OTR and CTR are quasi‐continuously measured in the headspace of the shake flasks using dedicated oxygen and carbon dioxide sensors, enabling precise respiratory quotient (RQ) evaluation. Self‐adhesive pH sensor spots are used for the high‐frequent real‐time pH monitoring of the culture. These prototype pH sensor spots stand out due to their simple sterilizability and subsequent one‐point calibration in the cultivation medium. The long‐term stability of the pH sensor spots was assessed in a 28‐day long abiotic experiment. The novel pH‐RAMOS was validated with different eukaryotic and prokaryotic microorganisms, such as Ogataea polymorpha, Ustilago trichophora, and Vibrio natriegens. The combination of online OTR, CTR, RQ, and pH signals allowed for identifying various metabolic phenomena, such as oxygen limitations, substrate limitations, diauxies, and the production or consumption of specific compounds, based on their degree of reduction or change of pH. The high‐frequent and sensitive pH‐monitoring was particularly advantageous for registering subtle and transient metabolic phenomena.
- Open Access
- 23 September 2024
- Published by Springer Nature in BMC Biotechnology
- Vol. 24 (1) , 1-15
Unraveling the impact of pH, sodium concentration, and medium osmolality on Vibrio natriegens in batch processes
Background: Vibrio natriegens, a halophilic marine γ-proteobacterium, holds immense biotechnological potential due to its remarkably short generation time of under ten minutes. However, the highest growth rates have been primarily observed on complex media, which often suffer from batch-to-batch variability affecting process stability and performance. Consistent bioprocesses necessitate the use of chemically defined media, which are usually optimized for fermenters with pH and dissolved oxygen tension (DOT) regulation, both of which are not applied during early-stage cultivations in shake flasks or microtiter plates. Existing studies on V. natriegens’ growth on mineral media report partially conflicting results, and a comprehensive study examining the combined effects of pH buffering, sodium concentration, and medium osmolality is lacking. Results: This study evaluates the influence of sodium concentration, pH buffering, and medium osmolality on the growth of V. natriegens under unregulated small-scale conditions. The maximum growth rate, time of glucose depletion, as well as the onset of stationary phase were observed through online-monitoring the oxygen transfer rate. The results revealed optimal growth conditions at an initial pH of 8.0 with a minimum of 300 mM MOPS buffer for media containing 20 g/L glucose or 180 mM MOPS for media with 10 g/L glucose. Optimal sodium chloride supplementation was found to be between 7.5 and 15 g/L, lower than previously reported ranges. This is advantageous for reducing industrial corrosion issues. Additionally, an osmolality range of 1 to 1.6 Osmol/kg was determined to be optimal for growth. Under these optimized conditions, V. natriegens achieved a growth rate of 1.97 ± 0.13 1/h over a period of 1 h at 37 °C, the highest reported rate for this organism on a mineral medium. Conclusion: This study provides guidelines for cultivating V. natriegens in early-stage laboratory settings without pH and DOT regulation. The findings suggest a lower optimal sodium chloride range than previously reported and establish an osmolality window for optimal growth, thereby advancing the understanding of V. natriegens’ physiology. In addition, this study offers a foundation for future research into the effects of different ions and carbon sources on V. natriegens.
- 23 September 2024
- Published by Springer Nature in BMC Biotechnology
- Vol. 24 (1) , 1-15
Open AccessUnraveling the impact of pH, sodium concentration, and medium osmolality on Vibrio natriegens in batch processes
Background: Vibrio natriegens, a halophilic marine γ-proteobacterium, holds immense biotechnological potential due to its remarkably short generation time of under ten minutes. However, the highest growth rates have been primarily observed on complex media, which often suffer from batch-to-batch variability affecting process stability and performance. Consistent bioprocesses necessitate the use of chemically defined media, which are usually optimized for fermenters with pH and dissolved oxygen tension (DOT) regulation, both of which are not applied during early-stage cultivations in shake flasks or microtiter plates. Existing studies on V. natriegens’ growth on mineral media report partially conflicting results, and a comprehensive study examining the combined effects of pH buffering, sodium concentration, and medium osmolality is lacking. Results: This study evaluates the influence of sodium concentration, pH buffering, and medium osmolality on the growth of V. natriegens under unregulated small-scale conditions. The maximum growth rate, time of glucose depletion, as well as the onset of stationary phase were observed through online-monitoring the oxygen transfer rate. The results revealed optimal growth conditions at an initial pH of 8.0 with a minimum of 300 mM MOPS buffer for media containing 20 g/L glucose or 180 mM MOPS for media with 10 g/L glucose. Optimal sodium chloride supplementation was found to be between 7.5 and 15 g/L, lower than previously reported ranges. This is advantageous for reducing industrial corrosion issues. Additionally, an osmolality range of 1 to 1.6 Osmol/kg was determined to be optimal for growth. Under these optimized conditions, V. natriegens achieved a growth rate of 1.97 ± 0.13 1/h over a period of 1 h at 37 °C, the highest reported rate for this organism on a mineral medium. Conclusion: This study provides guidelines for cultivating V. natriegens in early-stage laboratory settings without pH and DOT regulation. The findings suggest a lower optimal sodium chloride range than previously reported and establish an osmolality window for optimal growth, thereby advancing the understanding of V. natriegens’ physiology. In addition, this study offers a foundation for future research into the effects of different ions and carbon sources on V. natriegens.
- Open Access
- 3 July 2024
- Published by Springer Nature in Biotechnology for Biofuels and Bioproducts
- Vol. 17 (1) , 1-15
Phosphate limitation enhances malic acid production on nitrogen-rich molasses with Ustilago trichophora
Background: An important step in replacing petrochemical products with sustainable, cost-effective alternatives is the use of feedstocks other than, e.g., pure glucose in the fermentative production of platform chemicals. Ustilaginaceae offer the advantages of a wide substrate spectrum and naturally produce a versatile range of value-added compounds under nitrogen limitation. A promising candidate is the dicarboxylic acid malic acid, which may be applied as an acidulant in the food industry, a chelating agent in pharmaceuticals, or in biobased polymer production. However, fermentable residue streams from the food and agricultural industry with high nitrogen content, e.g., sugar beet molasses, are unsuited for processes with Ustilaginaceae, as they result in low product yields due to high biomass and low product formation. Results: This study uncovers challenges in evaluating complex feedstock applicability for microbial production processes, highlighting the role of secondary substrate limitations, internal storage molecules, and incomplete assimilation of these substrates. A microliter-scale screening method with online monitoring of microbial respiration was developed using malic acid production with Ustilago trichophora on molasses as an application example. Investigation into nitrogen, phosphate, sulphate, and magnesium limitations on a defined minimal medium demonstrated successful malic acid production under nitrogen and phosphate limitation. Furthermore, a reduction of nitrogen and phosphate in the elemental composition of U. trichophora was revealed under the respective secondary substrate limitation. These adaptive changes in combination with the intricate metabolic response hinder mathematical prediction of product formation and make the presented screening methodology for complex feedstocks imperative. In the next step, the screening was transferred to a molasses-based complex medium. It was determined that the organism assimilated only 25% and 50% of the elemental nitrogen and phosphorus present in molasses, respectively. Due to the overall low content of bioavailable phosphorus in molasses, the replacement of the state-of-the-art nitrogen limitation was shown to increase malic acid production by 65%. Conclusion: The identification of phosphate as a superior secondary substrate limitation for enhanced malic acid production opens up new opportunities for the effective utilization of molasses as a more sustainable and cost-effective substrate than, e.g., pure glucose for biobased platform chemical production.
- 3 July 2024
- Published by Springer Nature in Biotechnology for Biofuels and Bioproducts
- Vol. 17 (1) , 1-15
Open AccessPhosphate limitation enhances malic acid production on nitrogen-rich molasses with Ustilago trichophora
Background: An important step in replacing petrochemical products with sustainable, cost-effective alternatives is the use of feedstocks other than, e.g., pure glucose in the fermentative production of platform chemicals. Ustilaginaceae offer the advantages of a wide substrate spectrum and naturally produce a versatile range of value-added compounds under nitrogen limitation. A promising candidate is the dicarboxylic acid malic acid, which may be applied as an acidulant in the food industry, a chelating agent in pharmaceuticals, or in biobased polymer production. However, fermentable residue streams from the food and agricultural industry with high nitrogen content, e.g., sugar beet molasses, are unsuited for processes with Ustilaginaceae, as they result in low product yields due to high biomass and low product formation. Results: This study uncovers challenges in evaluating complex feedstock applicability for microbial production processes, highlighting the role of secondary substrate limitations, internal storage molecules, and incomplete assimilation of these substrates. A microliter-scale screening method with online monitoring of microbial respiration was developed using malic acid production with Ustilago trichophora on molasses as an application example. Investigation into nitrogen, phosphate, sulphate, and magnesium limitations on a defined minimal medium demonstrated successful malic acid production under nitrogen and phosphate limitation. Furthermore, a reduction of nitrogen and phosphate in the elemental composition of U. trichophora was revealed under the respective secondary substrate limitation. These adaptive changes in combination with the intricate metabolic response hinder mathematical prediction of product formation and make the presented screening methodology for complex feedstocks imperative. In the next step, the screening was transferred to a molasses-based complex medium. It was determined that the organism assimilated only 25% and 50% of the elemental nitrogen and phosphorus present in molasses, respectively. Due to the overall low content of bioavailable phosphorus in molasses, the replacement of the state-of-the-art nitrogen limitation was shown to increase malic acid production by 65%. Conclusion: The identification of phosphate as a superior secondary substrate limitation for enhanced malic acid production opens up new opportunities for the effective utilization of molasses as a more sustainable and cost-effective substrate than, e.g., pure glucose for biobased platform chemical production.
- Open Access
- 12 September 2023
- Published by Elsevier in Science of The Total Environment
- Vol. 905, 167035
Inoculum cell count influences separation efficiency and variance in Ames plate incorporation and Ames RAMOS test
- 12 September 2023
- Published by Elsevier in Science of The Total Environment
- Vol. 905, 167035
Open AccessInoculum cell count influences separation efficiency and variance in Ames plate incorporation and Ames RAMOS test
- Open Access
- 28 November 2017
- Published by Springer Nature in Microbial Cell Factories
- Vol. 16 (1) , 1-12
Optimizing recombinant protein expression via automated induction profiling in microtiter plates at different temperatures
Escherichia coli (E. coli) is the most abundant expression host for recombinant proteins. The production efficiency is dependent on a multitude of parameters. Therefore, high-throughput applications have become an increasingly frequent technique to investigate the main factors. Within this study, the effects of temperature, induction time and inducer concentration on the metabolic state and the product formation were extensively examined. Induction profiling of E. coli Tuner(DE3) pRhotHi-2-EcFbFP was performed in 48-well Flowerplates and standard 96-well plates using a robotic platform. In parallel shake flask cultivations, the respiration activity of the microorganisms was analyzed. Therefore, two online-monitoring systems were applied: the BioLector for microtiter plates and the RAMOS-device for shake flasks. The impact of different induction conditions on biomass and product formation as well as on the oxygen transfer rate was surveyed. Different optimal induction conditions were obtained for temperatures of 28, 30, 34, and 37 °C. The best inducer concentrations were determined to be between 0.05 and 0.1 mM IPTG for all investigated temperatures. This is 10–20 times lower than conventional guidelines suggest. The induction time was less relevant when the correct inducer concentration was chosen. Furthermore, there was a stronger impact on growth and respiration activity at higher temperatures. This indicated a higher metabolic burden. Therefore, lower IPTG concentrations were advantageous at elevated temperatures. Very similar results were obtained in standard 96-well plates. Two online-monitoring systems were successfully used to investigate the optimal induction conditions for the E. coli Tuner(DE3) pRhotHi-2-EcFbFP strain (lacY deletion mutant) at four different temperatures. The experimental effort was reduced to a minimum by integrating a liquid handling robot. To reach the maximum product formation, a detailed induction analysis was necessary. Whenever the cultivation temperature was changed, the induction conditions have to be adapted. Due to the experimental options provided by the BioLector technology, it was found that the higher the cultivation temperature, the lower the inducer concentration that has to be applied.
- 28 November 2017
- Published by Springer Nature in Microbial Cell Factories
- Vol. 16 (1) , 1-12
Open AccessOptimizing recombinant protein expression via automated induction profiling in microtiter plates at different temperatures
Escherichia coli (E. coli) is the most abundant expression host for recombinant proteins. The production efficiency is dependent on a multitude of parameters. Therefore, high-throughput applications have become an increasingly frequent technique to investigate the main factors. Within this study, the effects of temperature, induction time and inducer concentration on the metabolic state and the product formation were extensively examined. Induction profiling of E. coli Tuner(DE3) pRhotHi-2-EcFbFP was performed in 48-well Flowerplates and standard 96-well plates using a robotic platform. In parallel shake flask cultivations, the respiration activity of the microorganisms was analyzed. Therefore, two online-monitoring systems were applied: the BioLector for microtiter plates and the RAMOS-device for shake flasks. The impact of different induction conditions on biomass and product formation as well as on the oxygen transfer rate was surveyed. Different optimal induction conditions were obtained for temperatures of 28, 30, 34, and 37 °C. The best inducer concentrations were determined to be between 0.05 and 0.1 mM IPTG for all investigated temperatures. This is 10–20 times lower than conventional guidelines suggest. The induction time was less relevant when the correct inducer concentration was chosen. Furthermore, there was a stronger impact on growth and respiration activity at higher temperatures. This indicated a higher metabolic burden. Therefore, lower IPTG concentrations were advantageous at elevated temperatures. Very similar results were obtained in standard 96-well plates. Two online-monitoring systems were successfully used to investigate the optimal induction conditions for the E. coli Tuner(DE3) pRhotHi-2-EcFbFP strain (lacY deletion mutant) at four different temperatures. The experimental effort was reduced to a minimum by integrating a liquid handling robot. To reach the maximum product formation, a detailed induction analysis was necessary. Whenever the cultivation temperature was changed, the induction conditions have to be adapted. Due to the experimental options provided by the BioLector technology, it was found that the higher the cultivation temperature, the lower the inducer concentration that has to be applied.