Emiru Yidnekachew Melesse
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Emiru Yidnekachew Melesse has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Ali Yakoub Alkhair
Russian Biotechnological University
3 shared publications - Ирина Анатольевна Кирш
Russian Biotechnological University
3 shared publications - Yulia Aleksandrovna Filinskaya
Federal State Budgetary Educational Institution of Higher Education Russian Biotechnology University
2 shared publications - Ольга Анатольевна Банникова
Russian Biotechnological University
2 shared publications - A. V. Zaitseva
Russian Biotechnological University
1 shared publication Ali Alkhair
Moscow State University of Food Production
1 shared publication
Latest Publications
- Open Access
- 3 June 2025
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 87 (1) , 272-279
Effect of Zirconium oxide (ZrО2) Nanoparticles on the Mechanical, WVTR, and Antibacterial Properties of Polyethylene Polymer Matrix
A nanocomposite based on a low-density polyethylene (LDPE) matrix reinforced with zirconium dioxide (ZrO₂) nanoparticles was synthesized via single-screw extrusion and systematically characterized. Structural analysis confirmed homogeneous dispersion of ZrO₂ nanoparticles at lower concentrations (4.7% w/w), while agglomeration occurred at higher loadings (8.7% w/w), as evidenced by digital microscopy. FTIR spectroscopy revealed Zr-O vibrational modes at 421-468 cm⁻¹, verifying successful incorporation. Mechanical properties exhibited concentration-dependent behavior: tensile strength decreased by 31% (12.30→8.5 MPa) and elongation by 34% (482→320%) with 8.7% ZrO₂, attributed to stress concentration at nanoparticle clusters. Conversely, film thickness increased linearly (R²=0.98) with filler content, reducing water vapor transmission rate by 42% through enhanced tortuosity. The nanocomposites demonstrated remarkable antimicrobial efficacy, achieving 3-log reduction against E. coli at 8.7% loading, surpassing conventional food packaging materials. Thermal analysis (DSC/TGA) revealed improved thermal stability (↑15°C in decomposition temperature) without compromising LDPE's melt processability. These findings position ZrO₂-LDPE nanocomposites as advanced materials for active packaging, combining tailored mechanical performance, superior moisture barriers, and non-migratory antimicrobial protection while maintaining compliance with food-contact regulations.
- 3 June 2025
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 87 (1) , 272-279
Open AccessEffect of Zirconium oxide (ZrО2) Nanoparticles on the Mechanical, WVTR, and Antibacterial Properties of Polyethylene Polymer Matrix
A nanocomposite based on a low-density polyethylene (LDPE) matrix reinforced with zirconium dioxide (ZrO₂) nanoparticles was synthesized via single-screw extrusion and systematically characterized. Structural analysis confirmed homogeneous dispersion of ZrO₂ nanoparticles at lower concentrations (4.7% w/w), while agglomeration occurred at higher loadings (8.7% w/w), as evidenced by digital microscopy. FTIR spectroscopy revealed Zr-O vibrational modes at 421-468 cm⁻¹, verifying successful incorporation. Mechanical properties exhibited concentration-dependent behavior: tensile strength decreased by 31% (12.30→8.5 MPa) and elongation by 34% (482→320%) with 8.7% ZrO₂, attributed to stress concentration at nanoparticle clusters. Conversely, film thickness increased linearly (R²=0.98) with filler content, reducing water vapor transmission rate by 42% through enhanced tortuosity. The nanocomposites demonstrated remarkable antimicrobial efficacy, achieving 3-log reduction against E. coli at 8.7% loading, surpassing conventional food packaging materials. Thermal analysis (DSC/TGA) revealed improved thermal stability (↑15°C in decomposition temperature) without compromising LDPE's melt processability. These findings position ZrO₂-LDPE nanocomposites as advanced materials for active packaging, combining tailored mechanical performance, superior moisture barriers, and non-migratory antimicrobial protection while maintaining compliance with food-contact regulations.
- Open Access
- 30 May 2025
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 87 (2) , 198-203
Development of antimicrobial packaging materials using rosemary essential oil
In the context of increasing requirements for food safety and quality, it is important to develop effective methods of protection against microbial contamination. One of the innovative solutions is active packaging with natural antimicrobial additives that prevent the growth of microorganisms on the surface of products. These additives must retain their properties both during production and during further use. The main objective of this study was development of an active packaging film made of biopolymer with the introduction of rosemary essential oil in various concentrations, as well as determination of the antimicrobial, physical, mechanical and barrier properties of the resulting polymer material. The starch-based film was prepared by mechanical mixing of the initial reagents with the introduction of rosemary essential oil with a concentration of 0.5%; 1%; 3%; 5%. The antimicrobial properties of the polymer packaging material were determined by the disk-diffusion method in accordance with MUK 4.2.1890–04 in relation to Bacillus subtilis, Escherichia coli, Candida albicans, and Aspergillus niger. To assess the fungal resistance of the materials, the methods of GOST 9.049 (method 1) and GOST 9.048 (method 4) were selected. Determination of vapor permeability using the "PERME W3/030" device according to GOST GВ1037. The method for determining the physical and mechanical properties on a tensile testing machine according to GOST 28840–90. It was found that samples of packaging film based on starch with rosemary essential oil have antimicrobial activity against Candida albicans at concentrations of 3% and 5%, reducing the number of microorganisms on the film surface. In addition, its physical, mechanical and barrier properties are improved. Analysis of existing studies has shown that rosemary essential oil is an effective natural antimicrobial component. Its use in active starch-based packaging not only prevents the growth of microorganisms such as Candida albicans, but also helps improve the physical, mechanical and barrier properties of the packaging film. This makes it a promising solution for ensuring the safety and quality of food products.
- 30 May 2025
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 87 (2) , 198-203
Open AccessDevelopment of antimicrobial packaging materials using rosemary essential oil
In the context of increasing requirements for food safety and quality, it is important to develop effective methods of protection against microbial contamination. One of the innovative solutions is active packaging with natural antimicrobial additives that prevent the growth of microorganisms on the surface of products. These additives must retain their properties both during production and during further use. The main objective of this study was development of an active packaging film made of biopolymer with the introduction of rosemary essential oil in various concentrations, as well as determination of the antimicrobial, physical, mechanical and barrier properties of the resulting polymer material. The starch-based film was prepared by mechanical mixing of the initial reagents with the introduction of rosemary essential oil with a concentration of 0.5%; 1%; 3%; 5%. The antimicrobial properties of the polymer packaging material were determined by the disk-diffusion method in accordance with MUK 4.2.1890–04 in relation to Bacillus subtilis, Escherichia coli, Candida albicans, and Aspergillus niger. To assess the fungal resistance of the materials, the methods of GOST 9.049 (method 1) and GOST 9.048 (method 4) were selected. Determination of vapor permeability using the "PERME W3/030" device according to GOST GВ1037. The method for determining the physical and mechanical properties on a tensile testing machine according to GOST 28840–90. It was found that samples of packaging film based on starch with rosemary essential oil have antimicrobial activity against Candida albicans at concentrations of 3% and 5%, reducing the number of microorganisms on the film surface. In addition, its physical, mechanical and barrier properties are improved. Analysis of existing studies has shown that rosemary essential oil is an effective natural antimicrobial component. Its use in active starch-based packaging not only prevents the growth of microorganisms such as Candida albicans, but also helps improve the physical, mechanical and barrier properties of the packaging film. This makes it a promising solution for ensuring the safety and quality of food products.
- Open Access
- 31 October 2023
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 85 (3) , 199-212-212
Food packaging Bio-based plastics: Properties, Renewable Biomass resources, Synthesis, and Applications
The current trend in food packaging technology necessitates the development of novel packaging materials in order to extend the shelf life of food and reduce spoliation. To preserve the food product, the construction material of the packaging played a key role.In the emerging field of food packaging technology, using biobased plastics for food packaging shown a comparative advantage.At this moment, bioplastics have shown measurable benefits and are receiving more and more attention from business organizations, political figures, scientific communities, and in the whole public. This was as a result of looking for new plastic profiles brands. Besides, the environmental impact(ecological concerns) of convective materials, the depletion of natural resources specifically the petrochemical, and consumer concerns have necessitated alternative bio-based food packaging items. Therefore, the aim of this study was to review the properties of food packaging materials such as thermal, mechanical, barrier, surface, antimicrobial, optical, and environmental, as well as their synthesis type and applications. The cellulose and starch components of the common agricultural wastes for the synthesis of biopolymers were elaborated. In addition to that, different microalgae species were justified in the manufacturing of bio-based plastics.This review article also included examples of sustainable filler and reinforcement materials used in the food packaging industry. Therefore, this review work contributes to opening up the entire body of scientific knowledge on bio-based plastics used for food packaging and helps to develop important results for further investigation.
- 31 October 2023
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 85 (3) , 199-212-212
Open AccessFood packaging Bio-based plastics: Properties, Renewable Biomass resources, Synthesis, and Applications
The current trend in food packaging technology necessitates the development of novel packaging materials in order to extend the shelf life of food and reduce spoliation. To preserve the food product, the construction material of the packaging played a key role.In the emerging field of food packaging technology, using biobased plastics for food packaging shown a comparative advantage.At this moment, bioplastics have shown measurable benefits and are receiving more and more attention from business organizations, political figures, scientific communities, and in the whole public. This was as a result of looking for new plastic profiles brands. Besides, the environmental impact(ecological concerns) of convective materials, the depletion of natural resources specifically the petrochemical, and consumer concerns have necessitated alternative bio-based food packaging items. Therefore, the aim of this study was to review the properties of food packaging materials such as thermal, mechanical, barrier, surface, antimicrobial, optical, and environmental, as well as their synthesis type and applications. The cellulose and starch components of the common agricultural wastes for the synthesis of biopolymers were elaborated. In addition to that, different microalgae species were justified in the manufacturing of bio-based plastics.This review article also included examples of sustainable filler and reinforcement materials used in the food packaging industry. Therefore, this review work contributes to opening up the entire body of scientific knowledge on bio-based plastics used for food packaging and helps to develop important results for further investigation.
- Open Access
- 7 November 2022
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 84 (3) , 204-213
Overall Review the Current Tend and Difficulties of Antimicrobial compounds in Composite Food Packaging Applications
Food waste/spoilage caused by microbial cell has recently emerged as a major food insecurity and environmental concern. Additionally, food spoilage contributes to the economic crisis and healthy problems. As a result, an active packaging system is still required to keep the food safe and to protect its quality from foreign contaminants. The purpose of this review was to summarize the current solutions and difficulties of antimicrobial compounds in composite food packaging applications. Specifically, the extrusion and antimicrobial coating methods for incorporating antimicrobial compounds into packaging systems and their optimum processing parameters for common polymer composites were revealed. The common inorganic and organic antimicrobial substances/compounds with their quantities adding to the packaging system and their antimicrobial activity (reduction, partially deactivation and completely deactivation) were presented. The difficulties in creating a package with antimicrobial properties concerning issues of migration of antimicrobial additives from the package to the food product, accumulation of antimicrobial additives in the food product, as well as their processing temperature were elaborated. Therefore, this review work contributes to open up the entire scientific knowledge on antimicrobial compounds used in polymer composite materials for food packaging application and helps to develop important results for large scale operations
- 7 November 2022
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 84 (3) , 204-213
Open AccessOverall Review the Current Tend and Difficulties of Antimicrobial compounds in Composite Food Packaging Applications
Food waste/spoilage caused by microbial cell has recently emerged as a major food insecurity and environmental concern. Additionally, food spoilage contributes to the economic crisis and healthy problems. As a result, an active packaging system is still required to keep the food safe and to protect its quality from foreign contaminants. The purpose of this review was to summarize the current solutions and difficulties of antimicrobial compounds in composite food packaging applications. Specifically, the extrusion and antimicrobial coating methods for incorporating antimicrobial compounds into packaging systems and their optimum processing parameters for common polymer composites were revealed. The common inorganic and organic antimicrobial substances/compounds with their quantities adding to the packaging system and their antimicrobial activity (reduction, partially deactivation and completely deactivation) were presented. The difficulties in creating a package with antimicrobial properties concerning issues of migration of antimicrobial additives from the package to the food product, accumulation of antimicrobial additives in the food product, as well as their processing temperature were elaborated. Therefore, this review work contributes to open up the entire scientific knowledge on antimicrobial compounds used in polymer composite materials for food packaging application and helps to develop important results for large scale operations