Shuainan Ni
Research Subjects
Shuainan Ni has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Chengliang Xiao
Zhejiang University
4 shared publications - Chao Bie
CAS Key Laboratory of Design and Assembly of Functional Nanostructures, Fujian Key Laboratory of Nanomaterials, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian, 350002, PR China; Xiamen Key Laboratory of Rare Earth Photoelectric Functional Materials, Fujian Research Center for Rare Earth Engineering Technology, Xiamen Institute of Rare Earth Materials, Haixi Institute, Chinese Academy of Sciences, Xiamen, Fujian, 361021, PR China
2 shared publications Chuanying Liu
Institute of Zhejiang University-Quzhou
2 shared publicationsShan Wu
Fujian Research Center for Rare Earth Engineering Technology, Xiamen Institute of Rare Earth Materials, Haixi Institute, Chinese Academy of Sciences, Xiamen 361021, PR China
2 shared publications- Xiaoqi Sun
Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian 350002, P. R. China
2 shared publications Xigui Gao
Zhongxi Tianma New Material Technology Co., Ltd. Jining China
2 shared publications
Latest Publications
- 26 August 2026
- Published by Wiley in AIChE Journal
- Vol. 72 (12)
Tailored synergistic hydrophobic eutectic mixtures for ultra‐selective recovery of cobalt from calcium‐rich solutions
The selective recovery of cobalt (Co) from industrial wastewater is increasingly important for sustainable resource utilization but remains challenging in calcium‐rich media. In this work, a hydrophobic eutectic mixture was tailored by pairing tri‐ n ‐octylamine as the hydrogen bond acceptor with bis ‐ (2,4,4 ‐ trimethylpentyl) ‐ phosphinic acid as the hydrogen bond donor. This system integrates highly selective Co extraction with saponification‐free and diluent‐free operation, achieving a separation factor (SF Co/Ca ) exceeding 3389.4. Mechanistic analysis suggested that Co was extracted in the form of chloride‐rich anionic complexes. Using a counter‐current extraction flowsheet, effective separation of trace Co (0.50 g/L) from calcium‐rich saponification wastewater (Ca >40 g/L) was achieved. The Co concentration in the stripping solution reached 19.3 g/L, enabling subsequent precipitation of high‐purity CoCO 3 and resulting in an overall Co recovery of 96.2%. This work provides a feasible strategy for the selective recovery and enrichment of Co from industrial wastewater.
- 26 August 2026
- Published by Wiley in AIChE Journal
- Vol. 72 (12)
Tailored synergistic hydrophobic eutectic mixtures for ultra‐selective recovery of cobalt from calcium‐rich solutions
The selective recovery of cobalt (Co) from industrial wastewater is increasingly important for sustainable resource utilization but remains challenging in calcium‐rich media. In this work, a hydrophobic eutectic mixture was tailored by pairing tri‐ n ‐octylamine as the hydrogen bond acceptor with bis ‐ (2,4,4 ‐ trimethylpentyl) ‐ phosphinic acid as the hydrogen bond donor. This system integrates highly selective Co extraction with saponification‐free and diluent‐free operation, achieving a separation factor (SF Co/Ca ) exceeding 3389.4. Mechanistic analysis suggested that Co was extracted in the form of chloride‐rich anionic complexes. Using a counter‐current extraction flowsheet, effective separation of trace Co (0.50 g/L) from calcium‐rich saponification wastewater (Ca >40 g/L) was achieved. The Co concentration in the stripping solution reached 19.3 g/L, enabling subsequent precipitation of high‐purity CoCO 3 and resulting in an overall Co recovery of 96.2%. This work provides a feasible strategy for the selective recovery and enrichment of Co from industrial wastewater.
- 30 July 2026
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (32) , 17776-17785
Saponified Gemfibrozil for Selective Recovery of Energy-Relevant Cobalt and Nickel from Magnesium-Rich Solutions
Selective coextraction and recovery of Co and Ni from magnesium-rich sulfate solutions remain highly challenging due to the closely similar physicochemical properties of Co2+, Ni2+, and Mg2+. In this work, gemfibrozil (GEM) was employed as an extractant for the selective coextraction of Co2+ and Ni2+, enabling their efficient separation from Mg2+/Ca2+-containing solutions. The extraction behavior was systematically investigated, revealing that the separation performance was strongly influenced by the saponification degree, initial feed pH, extraction time, and Mg2+/(Co2+ + Ni2+) concentration ratio, with maximum separation factors of SFCo/Mg = 117.5 and SFNi/Mg = 172.7. The GEM system also exhibited excellent extraction-stripping cyclic stability, with Co2+ and Ni2+ loading capacities of 8.59 g/L and 8.99 g/L, respectively. Under optimized conditions, a counter-current extraction process consisting of three extraction stages, six scrubbing stages, and two stripping stages was established, producing a strip liquor with a total Co2+ + Ni2+ concentration of 18.5 g/L. The process increased the purity of Co2+ + Ni2+ from 12.5 wt % to 98.1 wt % and achieved an enrichment factor of more than nine compared with the initial feed solution. Mechanistic studies based on slope analysis and FT-IR spectroscopy revealed that the extraction of Co2+ and Ni2+ by saponified GEM proceeds primarily via a cation-exchange mechanism. This work provides an effective strategy for the selective recovery of cobalt and nickel from Mg-rich solutions and offers new insights into the design of separation systems for energy-critical metals in complex resources.
- 30 July 2026
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (32) , 17776-17785
Saponified Gemfibrozil for Selective Recovery of Energy-Relevant Cobalt and Nickel from Magnesium-Rich Solutions
Selective coextraction and recovery of Co and Ni from magnesium-rich sulfate solutions remain highly challenging due to the closely similar physicochemical properties of Co2+, Ni2+, and Mg2+. In this work, gemfibrozil (GEM) was employed as an extractant for the selective coextraction of Co2+ and Ni2+, enabling their efficient separation from Mg2+/Ca2+-containing solutions. The extraction behavior was systematically investigated, revealing that the separation performance was strongly influenced by the saponification degree, initial feed pH, extraction time, and Mg2+/(Co2+ + Ni2+) concentration ratio, with maximum separation factors of SFCo/Mg = 117.5 and SFNi/Mg = 172.7. The GEM system also exhibited excellent extraction-stripping cyclic stability, with Co2+ and Ni2+ loading capacities of 8.59 g/L and 8.99 g/L, respectively. Under optimized conditions, a counter-current extraction process consisting of three extraction stages, six scrubbing stages, and two stripping stages was established, producing a strip liquor with a total Co2+ + Ni2+ concentration of 18.5 g/L. The process increased the purity of Co2+ + Ni2+ from 12.5 wt % to 98.1 wt % and achieved an enrichment factor of more than nine compared with the initial feed solution. Mechanistic studies based on slope analysis and FT-IR spectroscopy revealed that the extraction of Co2+ and Ni2+ by saponified GEM proceeds primarily via a cation-exchange mechanism. This work provides an effective strategy for the selective recovery of cobalt and nickel from Mg-rich solutions and offers new insights into the design of separation systems for energy-critical metals in complex resources.
- 25 July 2025
- Published by Elsevier in Journal of Rare Earths
- Vol. 44 (6) , 1907-1914
Push-pull extraction strategy using DTPA as a complexing agent for enhanced separation of lutetium and ytterbium
- 25 July 2025
- Published by Elsevier in Journal of Rare Earths
- Vol. 44 (6) , 1907-1914
Push-pull extraction strategy using DTPA as a complexing agent for enhanced separation of lutetium and ytterbium
- 9 September 2023
- Published by Elsevier in Separation and Purification Technology
- Vol. 328
Selective separation of radioactive thorium and uranium from scandium using N-heterocyclic carboxamide ligands
- 9 September 2023
- Published by Elsevier in Separation and Purification Technology
- Vol. 328
Selective separation of radioactive thorium and uranium from scandium using N-heterocyclic carboxamide ligands
- 15 January 2022
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 10 (2) , 107186
The selective recovery of rare earth from radioactive waste residue using improved oxamic acid for environmental and resource concerns
- 15 January 2022
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 10 (2) , 107186
The selective recovery of rare earth from radioactive waste residue using improved oxamic acid for environmental and resource concerns
- Open Access
- 1 January 2021
- Published by Elsevier in SSRN Electronic Journal
Efficient and Sustainable Separation of Yttrium from Heavy Rare Earth Using Functionalized Ionic Liquid [N 1888][NDA]
The separation of adjacent rare earth (RE) has always been one of the most difficult separation tasks, especially the separation and purification of yttrium (Y) from heavy rare earth (HREE). In the traditional Y separation process, the organic phase composed of acidic extractants such as naphthenic acid (HA) and neodecanoic acid (NDA) need to be saponified with sodium hydroxide or ammonia in each cycle. The resulting alkali consumption and saponification wastewater have negative impacts on the environment. In this article, a bifunctional ionic liquid [methyltrioctyl ammonium][neodecanoate] ([N1888][NDA]) was synthesized, and its extraction ability, stripping property, recycling stability and process development for Y separation were investigated systematically. Interestingly, the separation factors (β) of Ho/Y and Er/Y reached 2.64 and 4.32, especially the Lu/Y reached 16.27. A higher separation factor is of significance for the separation of Y from HREEs. The extraction sequence of rare earth elements (REEs) in [N1888][NDA] follows positive sequence extraction, which is the same as that in neodecanoic acid system. In addition, the separation process of industrial HREE feed liquid containing 0.20 mol·L-1 REEs (Y, 88.87 mol.%) was studied. By adjusting the extraction conditions, salting-out reagent such as NaCl was not required in the aqueous phase, which avoided the high salt component of the product. Through the fractional extraction experiment of 11-stage extraction and 4-stage scrubbing, the yttrium product with a purity of 99.03 mol.% was obtained. The organic phase composed of [N1888][NDA] was stable after being regenerated with NaOH for recycling extraction.
- 1 January 2021
- Published by Elsevier in SSRN Electronic Journal
Open AccessEfficient and Sustainable Separation of Yttrium from Heavy Rare Earth Using Functionalized Ionic Liquid [N 1888][NDA]
The separation of adjacent rare earth (RE) has always been one of the most difficult separation tasks, especially the separation and purification of yttrium (Y) from heavy rare earth (HREE). In the traditional Y separation process, the organic phase composed of acidic extractants such as naphthenic acid (HA) and neodecanoic acid (NDA) need to be saponified with sodium hydroxide or ammonia in each cycle. The resulting alkali consumption and saponification wastewater have negative impacts on the environment. In this article, a bifunctional ionic liquid [methyltrioctyl ammonium][neodecanoate] ([N1888][NDA]) was synthesized, and its extraction ability, stripping property, recycling stability and process development for Y separation were investigated systematically. Interestingly, the separation factors (β) of Ho/Y and Er/Y reached 2.64 and 4.32, especially the Lu/Y reached 16.27. A higher separation factor is of significance for the separation of Y from HREEs. The extraction sequence of rare earth elements (REEs) in [N1888][NDA] follows positive sequence extraction, which is the same as that in neodecanoic acid system. In addition, the separation process of industrial HREE feed liquid containing 0.20 mol·L-1 REEs (Y, 88.87 mol.%) was studied. By adjusting the extraction conditions, salting-out reagent such as NaCl was not required in the aqueous phase, which avoided the high salt component of the product. Through the fractional extraction experiment of 11-stage extraction and 4-stage scrubbing, the yttrium product with a purity of 99.03 mol.% was obtained. The organic phase composed of [N1888][NDA] was stable after being regenerated with NaOH for recycling extraction.