Wei Guo
Research Subjects
Wei Guo has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
Jan Fransaer
Department of Materials Engineering
3 shared publicationsWouter Monnens
Department of Materials Engineering
3 shared publications- Xuan Zhang
School of Materials Science and Engineering, Zhejiang University, Hangzhou 310027, China
3 shared publications Xueliang Zhang
Department of Materials Engineering
3 shared publicationsNing Han
Department of Materials Engineering, KU Leuven Kasteelpark Arenberg 44, bus 2450, B-3001 Heverlee, Belgium
2 shared publications- Ning Han
Department of Electrical and Computer Engineering, University of Toronto, Toronto, ON M5S 1A4, Canada
2 shared publications
Latest Publications
- 18 July 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (29) , 26612-26623
The Ultra-Fast Room-Temperature Electrosynthesis of Zeolitic Imidazolate Framework Films
Efficient and scalable fabrication of metal-organic frameworks (MOFs) as thin films is a key step toward their commercial applications. However, it remains challenging to process most MOFs into films due to their chemical and physical properties. Here, we report a cation coordination-regulated strategy for the rapid and continuous electrochemical synthesis of high-quality zeolitic imidazolate framework (ZIF) films with a tunable thickness. Through controlled experiments and computational investigations, we find that the more important role of modulators (e.g., ammonia) in the fast nucleation of ZIFs is to lower the energy barrier for the coordination of metal ions with ligands by forming intermediates rather than the widely acknowledged deprotonation effect of weak bases. Using this kinetically accelerating strategy, the ultrafast (within 10 s) deposition of well-intergrown ZIF-8 films with a high deposition efficiency is achieved from aqueous electrolytes at room temperature. Moreover, by combining our strategy with metal plating techniques, ZIF-8 films were anodically deposited on various substrates, including copper foils and porous anodic aluminum oxide (AAO) membranes. This strategy is universal for the deposition of a diverse range of ZIFs (such as ZIF-67, ZIF-4, and ZIF-7) and enables roll-to-roll fabrication of ZIF films under mild conditions.
- 18 July 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (29) , 26612-26623
The Ultra-Fast Room-Temperature Electrosynthesis of Zeolitic Imidazolate Framework Films
Efficient and scalable fabrication of metal-organic frameworks (MOFs) as thin films is a key step toward their commercial applications. However, it remains challenging to process most MOFs into films due to their chemical and physical properties. Here, we report a cation coordination-regulated strategy for the rapid and continuous electrochemical synthesis of high-quality zeolitic imidazolate framework (ZIF) films with a tunable thickness. Through controlled experiments and computational investigations, we find that the more important role of modulators (e.g., ammonia) in the fast nucleation of ZIFs is to lower the energy barrier for the coordination of metal ions with ligands by forming intermediates rather than the widely acknowledged deprotonation effect of weak bases. Using this kinetically accelerating strategy, the ultrafast (within 10 s) deposition of well-intergrown ZIF-8 films with a high deposition efficiency is achieved from aqueous electrolytes at room temperature. Moreover, by combining our strategy with metal plating techniques, ZIF-8 films were anodically deposited on various substrates, including copper foils and porous anodic aluminum oxide (AAO) membranes. This strategy is universal for the deposition of a diverse range of ZIFs (such as ZIF-67, ZIF-4, and ZIF-7) and enables roll-to-roll fabrication of ZIF films under mild conditions.
- Open Access
- 19 July 2024
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 10 (29) , eado7826
A synchronous-twisting method to realize radial scalability in fibrous energy storage devices
For wearable electronics, radial scalability is one of the key research areas for fibrous energy storage devices to be commercialized, but this field has been shelved for years due to the lack of effective methods and configuration arrangements. Here, the team presents a generalizable strategy to realize radial scalability by applying a synchronous-twisting method (STM) for synthesizing a coaxial-extensible configuration (CEC). As examples, aqueous fiber-shaped Zn-MnO 2 batteries and MoS 2 -MnO 2 supercapacitors with a diameter of ~500 μm and a length of 100 cm were made. Because of the radial scalability, uniform current distribution, and stable binding force in CEC, the devices not only have high energy densities (~316 Wh liter −1 for Zn-MnO 2 batteries and ~107 Wh liter −1 for MoS 2 -MnO 2 supercapacitors) but also maintain a stable operational state in textiles when external bending and tensile forces were applied. The fabricating method together with the radial scalability of the devices provides a reference for future fiber-shaped energy storage devices.
- 19 July 2024
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 10 (29) , eado7826
Open AccessA synchronous-twisting method to realize radial scalability in fibrous energy storage devices
For wearable electronics, radial scalability is one of the key research areas for fibrous energy storage devices to be commercialized, but this field has been shelved for years due to the lack of effective methods and configuration arrangements. Here, the team presents a generalizable strategy to realize radial scalability by applying a synchronous-twisting method (STM) for synthesizing a coaxial-extensible configuration (CEC). As examples, aqueous fiber-shaped Zn-MnO 2 batteries and MoS 2 -MnO 2 supercapacitors with a diameter of ~500 μm and a length of 100 cm were made. Because of the radial scalability, uniform current distribution, and stable binding force in CEC, the devices not only have high energy densities (~316 Wh liter −1 for Zn-MnO 2 batteries and ~107 Wh liter −1 for MoS 2 -MnO 2 supercapacitors) but also maintain a stable operational state in textiles when external bending and tensile forces were applied. The fabricating method together with the radial scalability of the devices provides a reference for future fiber-shaped energy storage devices.
- 30 April 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (22) , 12907-12925
Immobilization of metal active centers in reticular framework materials for photocatalytic energy conversion
To enhance the economy and society's sustainability, prioritizing innovative, green energy conversion methods is essential. The conversion of solar energy into chemical energy through photocatalysis represents a viable solution in the pursuit of sustainable energy resources despite low solar-to-energy conversion efficiency. In recent years, the immobilization of metal active centers in nanospace has been considered an important strategy to improve photocatalytic performance. Metal–organic frameworks (MOFs), covalent organic frameworks (COFs) and hydrogen-bonded organic frameworks (HOFs), as exciting reticular framework materials, have attracted much attention due to their advantages of large specific surface area, high porosity and tunable functionalization sites, which are considered promising carriers for immobilizing metal sites. This paper introduces the structural features and advantages of each framework in photocatalysis, highlighting their potential applications in water splitting (H2 or O2 evolution) and CO2 reduction. The review underscores the outstanding performance of metal-active sites within these frameworks. Finally, the current limitations and challenges of the reticular framework materials in photocatalysis are pointed out, and an outlook for future development is provided, which aims to inspire continued advancements in green energy solutions for a sustainable future.
- 30 April 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (22) , 12907-12925
Immobilization of metal active centers in reticular framework materials for photocatalytic energy conversion
To enhance the economy and society's sustainability, prioritizing innovative, green energy conversion methods is essential. The conversion of solar energy into chemical energy through photocatalysis represents a viable solution in the pursuit of sustainable energy resources despite low solar-to-energy conversion efficiency. In recent years, the immobilization of metal active centers in nanospace has been considered an important strategy to improve photocatalytic performance. Metal–organic frameworks (MOFs), covalent organic frameworks (COFs) and hydrogen-bonded organic frameworks (HOFs), as exciting reticular framework materials, have attracted much attention due to their advantages of large specific surface area, high porosity and tunable functionalization sites, which are considered promising carriers for immobilizing metal sites. This paper introduces the structural features and advantages of each framework in photocatalysis, highlighting their potential applications in water splitting (H2 or O2 evolution) and CO2 reduction. The review underscores the outstanding performance of metal-active sites within these frameworks. Finally, the current limitations and challenges of the reticular framework materials in photocatalysis are pointed out, and an outlook for future development is provided, which aims to inspire continued advancements in green energy solutions for a sustainable future.
- 28 September 2023
- Published by Wiley in Chemistry – A European Journal
- Vol. 29 (62) , e202302338
Electrosynthesis of Metal–Organic Framework Films with Well‐Defined Facets
The deposition of metal–organic framework (MOF) films with defined exposed facets is important to enhance the performance of these films for, for example, catalysis or separations. In this work, MOF films with specific exposed facets are electrodeposited anodically on various substrates (e. g. on copper‐sputtered Si wafers, copper meshes, copper foams, and polypropylene membranes). The influence of the deposition parameters, including the pH of the solution, current density, concentration of linker, and solvent, on the exposed facets of the deposited MOFs was investigated. The results suggest that precise control over the supersaturation during anodic deposition is a possible strategy for synthesizing MOF crystals with well‐defined exposed facets. This approach provides a powerful toolbox for various applications requiring crystal facet control of MOF films.
- 28 September 2023
- Published by Wiley in Chemistry – A European Journal
- Vol. 29 (62) , e202302338
Electrosynthesis of Metal–Organic Framework Films with Well‐Defined Facets
The deposition of metal–organic framework (MOF) films with defined exposed facets is important to enhance the performance of these films for, for example, catalysis or separations. In this work, MOF films with specific exposed facets are electrodeposited anodically on various substrates (e. g. on copper‐sputtered Si wafers, copper meshes, copper foams, and polypropylene membranes). The influence of the deposition parameters, including the pH of the solution, current density, concentration of linker, and solvent, on the exposed facets of the deposited MOFs was investigated. The results suggest that precise control over the supersaturation during anodic deposition is a possible strategy for synthesizing MOF crystals with well‐defined exposed facets. This approach provides a powerful toolbox for various applications requiring crystal facet control of MOF films.
- 28 August 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-01 (22) , 1572
Role of the Coordination of Metal Ions by Ammonia for the Anodic Electrosynthesis of MOF Films
Metal-organic frameworks (MOFs), consisting of inorganic nodes coordinated by organic ligands, have received tremendous attention in the past decades due to their high surface area, high porosity, designable pore-aperture shape/size, and tunable building units (including metal centers and functional ligands). For most of their applications, such as separation, catalysis, sensors, and energy storage/conversion devices, MOFs in the form of films/membranes are desired. Anodic electrodeposition is a promising and cost-effective method to in-situ prepare metal-organic framework (MOF) films on metal substrates. However, the anodic synthesis of continuous zeolitic imidazolate framework (ZIF) films, an important subclass of MOF materials, has been proved challenging. Here, we report a facile anodic deposition method that enables the ultra-fast preparation of uniform and continuous ZIF-8 films with tunable thickness from the aqueous solution at room temperature by using the ammonia hydroxide-assisted deprotonation strategy (AHADS). The growth rate of the MOF films is flexibly controlled by the applied current densities, the concentration of the linkers, and the amount of added ammonia hydroxide. The roll-to-roll deposition of the ZIF-8 films on the zinc foils shows the possibility of this method for large-scale industrial synthesis. The control experiments and theoretical calculations reveal that the formation of Zn(NH3)4 2+ complex by adding excessive ammonia hydroxide is crucial to promote the coordination of 2-Methylimidazole (Hmim) with Zn2+. Afterward, the Zn2+ cation attracts electrons of Hmim and thus weakens the N-H bond, which decreases the free energy for the deprotonation of Hmim. As a result, the ZIF-8 films can be aqueously deposited at low pH under room temperature. Various pure ZIF films (ZIF-4, ZIF-7, and ZIF-67) with different metal nodes or organic linkers were successfully deposited via this strategy. In addition, ZIF-8 films deposited on the zinc foil show ability to decrease the overpotential for the zinc plating and stripping, suggesting its possibility for use in reversible zinc metal batteries. This work broadens the applicability of anodic deposition and indicates the potential applications of metal-supported MOF films in energy storage and conversion fields
- 28 August 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-01 (22) , 1572
Role of the Coordination of Metal Ions by Ammonia for the Anodic Electrosynthesis of MOF Films
Metal-organic frameworks (MOFs), consisting of inorganic nodes coordinated by organic ligands, have received tremendous attention in the past decades due to their high surface area, high porosity, designable pore-aperture shape/size, and tunable building units (including metal centers and functional ligands). For most of their applications, such as separation, catalysis, sensors, and energy storage/conversion devices, MOFs in the form of films/membranes are desired. Anodic electrodeposition is a promising and cost-effective method to in-situ prepare metal-organic framework (MOF) films on metal substrates. However, the anodic synthesis of continuous zeolitic imidazolate framework (ZIF) films, an important subclass of MOF materials, has been proved challenging. Here, we report a facile anodic deposition method that enables the ultra-fast preparation of uniform and continuous ZIF-8 films with tunable thickness from the aqueous solution at room temperature by using the ammonia hydroxide-assisted deprotonation strategy (AHADS). The growth rate of the MOF films is flexibly controlled by the applied current densities, the concentration of the linkers, and the amount of added ammonia hydroxide. The roll-to-roll deposition of the ZIF-8 films on the zinc foils shows the possibility of this method for large-scale industrial synthesis. The control experiments and theoretical calculations reveal that the formation of Zn(NH3)4 2+ complex by adding excessive ammonia hydroxide is crucial to promote the coordination of 2-Methylimidazole (Hmim) with Zn2+. Afterward, the Zn2+ cation attracts electrons of Hmim and thus weakens the N-H bond, which decreases the free energy for the deprotonation of Hmim. As a result, the ZIF-8 films can be aqueously deposited at low pH under room temperature. Various pure ZIF films (ZIF-4, ZIF-7, and ZIF-67) with different metal nodes or organic linkers were successfully deposited via this strategy. In addition, ZIF-8 films deposited on the zinc foil show ability to decrease the overpotential for the zinc plating and stripping, suggesting its possibility for use in reversible zinc metal batteries. This work broadens the applicability of anodic deposition and indicates the potential applications of metal-supported MOF films in energy storage and conversion fields