Kepeng Hong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kepeng Hong has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Jochen Teizer
Technical University of Denmark
5 shared publications - Carl Schultz
Aarhus University Department of Electrical and Computer Engineering
2 shared publications - Karsten Winther Johansen
PhD Candidate, Department of Civil and Mechanical Engineering, Technical University of Denmark, Kongens Lyngby, Denmark: )
2 shared publications - Kilian Speiser
Technical University of Denmark, DK
2 shared publications Asger D. Larsen
Technical University of Denmark, DK
1 shared publicationMarcus B. Nilsen
Technical University of Denmark, DK
1 shared publication
Latest Publications
- Open Access
- 6 May 2026
- Published by International Council for Research and Innovation in Building and Construction in Journal of Information Technology in Construction
- p. 584
Automated hazard identification and energy-based risk assessment for tower crane lifting operations using RTK-GNSS positioning and tracking
Tower cranes are critical for lifting heavy elements in prefabricated and modular construction, but their operations pose significant safety risks. This study proposes a data-driven method using Real-Time Kinematic Global Navigation Satellite System (RTK-GNSS) that tracks the crane trolley and workers movements and assesses the potential struck-by hazards from lifted payloads. By analyzing the trolley’s velocity and vertical displacement, the novelty in the method respectively detects the lifting stages and estimates the payload weight, while pairing its real to the planned placement location in the Industry Foundation Classes (IFC) model. An energy-based hazard assessment computes the intensity of detected incidents when workers’ RTK-GNSS wearables are inside of hazardous crane swing zones. The severity is evaluated in the form of a statistical analysis and density map. Unprecedented safety-relevant information becomes available to practitioners that can use it in responsible decision-making. Compared to computationally intensive systems such as cameras, the proposed method provides an alternative cost-effective, scalable solution for automating the monitoring of hazardous outdoor workspaces.
- 6 May 2026
- Published by International Council for Research and Innovation in Building and Construction in Journal of Information Technology in Construction
- p. 584
Open AccessAutomated hazard identification and energy-based risk assessment for tower crane lifting operations using RTK-GNSS positioning and tracking
Tower cranes are critical for lifting heavy elements in prefabricated and modular construction, but their operations pose significant safety risks. This study proposes a data-driven method using Real-Time Kinematic Global Navigation Satellite System (RTK-GNSS) that tracks the crane trolley and workers movements and assesses the potential struck-by hazards from lifted payloads. By analyzing the trolley’s velocity and vertical displacement, the novelty in the method respectively detects the lifting stages and estimates the payload weight, while pairing its real to the planned placement location in the Industry Foundation Classes (IFC) model. An energy-based hazard assessment computes the intensity of detected incidents when workers’ RTK-GNSS wearables are inside of hazardous crane swing zones. The severity is evaluated in the form of a statistical analysis and density map. Unprecedented safety-relevant information becomes available to practitioners that can use it in responsible decision-making. Compared to computationally intensive systems such as cameras, the proposed method provides an alternative cost-effective, scalable solution for automating the monitoring of hazardous outdoor workspaces.
- 1 October 2024
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Management, Procurement and Law
- Vol. 177 (4) , 207-222
Automated quantification of construction workers’ exposure to falling object hazards
The construction industry is among the most hazardous industries, and its continuously changing and complex environment results in a labour-intensive task of planning and preventing hazards. Current manual safety planning procedures cannot keep up with construction progress. This leads to unplanned durations and an increased responsibility for the individual workers to analyse and act accordingly to an emerging situation. This work proposes an automated approach to identifying and measuring the amount of struck-by falling object hazard exposure to construction tasks and their assigned work crews. Additionally, falling objects can originate from activities not foreseen or planned due to planning resolution (e.g. crane lift paths or temporarily impassable access routes). Therefore, it is investigated how to extend the current practices of safety analysis in both the planning and construction stages using building information modelling artificial intelligence and sensor techniques. The proposed strategy is to identify hazard sources and subjects based on their topology and nature in a spatio-temporal analysis. The proposed combinatorial analysis approach is validated in a case study performed on a real construction project in Finland. It yields new insights, which can be necessary for construction sequence decisions and convincing workers to improve their safety behaviour.
- 1 October 2024
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Management, Procurement and Law
- Vol. 177 (4) , 207-222
Automated quantification of construction workers’ exposure to falling object hazards
The construction industry is among the most hazardous industries, and its continuously changing and complex environment results in a labour-intensive task of planning and preventing hazards. Current manual safety planning procedures cannot keep up with construction progress. This leads to unplanned durations and an increased responsibility for the individual workers to analyse and act accordingly to an emerging situation. This work proposes an automated approach to identifying and measuring the amount of struck-by falling object hazard exposure to construction tasks and their assigned work crews. Additionally, falling objects can originate from activities not foreseen or planned due to planning resolution (e.g. crane lift paths or temporarily impassable access routes). Therefore, it is investigated how to extend the current practices of safety analysis in both the planning and construction stages using building information modelling artificial intelligence and sensor techniques. The proposed strategy is to identify hazard sources and subjects based on their topology and nature in a spatio-temporal analysis. The proposed combinatorial analysis approach is validated in a case study performed on a real construction project in Finland. It yields new insights, which can be necessary for construction sequence decisions and convincing workers to improve their safety behaviour.
- 19 September 2023
- Published by Springer Nature
- p. 201-212
A Digital Twin Model for Advancing Construction Safety
- 19 September 2023
- Published by Springer Nature
- p. 201-212
A Digital Twin Model for Advancing Construction Safety
- Open Access
- 1 January 2023
- Published by Firenze University Press
- p. 155-166
Enhancing the Realism of Virtual Construction Safety Training: Integration of Real-Time Location Systems for Real-World Hazard Simulations
In numerous studies, virtual training for construction safety has been proposed as a promising approach. However, creating realistic training scenarios requires significant resources, encompassing various elements such as sound, graphics, agent behavior, and realistic hazards. Digital Twins have revolutionized this process, and although so far, on a conceptual level only, significantly reducing the associated workload, it is still not exploiting its full potential. In this work, we propose a novel approach that leverages Real-time Location Systems (RTLS) data to simulate the real-world behavior of construction workers and equipment within Virtual Training Environments (VTEs). We aim to create training scenarios with dynamic real-world instead of hardcoded made-up hazardous events. To achieve this, we propose an extension to our Digital Twin for Construction Safety (DTCS) framework that now integrates (a) trajectory data streams of construction personnel and equipment and (b) technical specifications of the construction site work environment, including location and geometry of terrain and surface objects, to simulate real-world hazards in virtual safety training scenarios. Our further contribution is a case study application to explore the DTCS training capacity. Applying a logical filtering algorithm, we can process the RTLS data and ensure that the movements of the workers and equipment within the virtual environment are as realistic and representative as within the real world. This then enables the creation of realistic hazards that trainees can encounter in the training phase. Preliminary results with trainees suggest that the proposed work can have a high potential to enhance the realism of safety training, especially when they need to experience human-machine-related interactions safely. However, further work is required to create more responsive learning environments where the equipment follows real trajectories but also responds intelligently to the trainees' actions. By leveraging real-time data and advanced visualization technologies, we bridge the gap between the physical and virtual realms, enabling trainees to interact and navigate within a realistic virtual environment
- 1 January 2023
- Published by Firenze University Press
- p. 155-166
Open AccessEnhancing the Realism of Virtual Construction Safety Training: Integration of Real-Time Location Systems for Real-World Hazard Simulations
In numerous studies, virtual training for construction safety has been proposed as a promising approach. However, creating realistic training scenarios requires significant resources, encompassing various elements such as sound, graphics, agent behavior, and realistic hazards. Digital Twins have revolutionized this process, and although so far, on a conceptual level only, significantly reducing the associated workload, it is still not exploiting its full potential. In this work, we propose a novel approach that leverages Real-time Location Systems (RTLS) data to simulate the real-world behavior of construction workers and equipment within Virtual Training Environments (VTEs). We aim to create training scenarios with dynamic real-world instead of hardcoded made-up hazardous events. To achieve this, we propose an extension to our Digital Twin for Construction Safety (DTCS) framework that now integrates (a) trajectory data streams of construction personnel and equipment and (b) technical specifications of the construction site work environment, including location and geometry of terrain and surface objects, to simulate real-world hazards in virtual safety training scenarios. Our further contribution is a case study application to explore the DTCS training capacity. Applying a logical filtering algorithm, we can process the RTLS data and ensure that the movements of the workers and equipment within the virtual environment are as realistic and representative as within the real world. This then enables the creation of realistic hazards that trainees can encounter in the training phase. Preliminary results with trainees suggest that the proposed work can have a high potential to enhance the realism of safety training, especially when they need to experience human-machine-related interactions safely. However, further work is required to create more responsive learning environments where the equipment follows real trajectories but also responds intelligently to the trainees' actions. By leveraging real-time data and advanced visualization technologies, we bridge the gap between the physical and virtual realms, enabling trainees to interact and navigate within a realistic virtual environment
- Open Access
- 1 January 2023
- Published by Firenze University Press
- p. 564-573
Robotic Assembly and Reuse of Modular Elements in the Supply Chain of a Learning Factory for Construction and in the Context of Circular Economy
Although robotic solutions have been making significant contributions to fabrication environments, implementations in the construction are rare. It seems a disconnect between the industries exists where in construction the high number of non-uniform work tasks, the wide assortment of types and shapes of building materials and elements, and the presence of human workers creating safety hazards make the deployment of rather rigid robotic manipulators on construction sites much more complex than in production-like work environments. To advance construction with robotic solutions, it could prove beneficial to make each sector aware of the barriers that exist, and likewise, introduce a physical space for joint experimentation with state-of-the-art technologies from both fields. One way of alleviating this issue is to connect the sectors by providing hands-on education and research experiences, defined hereby as Learning Factory for Construction (LFC). This paper presents a scaled-down version of a LFC that has a robotic manipulator perform fully-automated and precise assembly, deconstruction, and reuse tasks of modular construction elements, whereas the elements are tracked with fiducial markers according to a known building information model and schedule. Furthermore, the FLC continuously gathers and analyzes data for performance, measures successful completions, assembly times, and potential quality defects. This project involved Masters level students with domain expertise from architectural, civil, and mechanical engineering in a cross-disciplinary and collaborative learning exercise of building a working prototype within a semester-long study project. Beyond the core tasks of the digital design and robotic application, the group developed theoretical concepts and limitations for more holistic views on circular economy, lean production, on- and off-site logistics, modularization, and construction safety, just as expected from a LFC. It is anticipated that the next generation of professionals working in the built environment and intending to solve some of the larger and more complex societal problems will require both the technical and communication skills that a LFC can stimulate. Therefore, LFC is expected to become an important component of active learning environments
- 1 January 2023
- Published by Firenze University Press
- p. 564-573
Open AccessRobotic Assembly and Reuse of Modular Elements in the Supply Chain of a Learning Factory for Construction and in the Context of Circular Economy
Although robotic solutions have been making significant contributions to fabrication environments, implementations in the construction are rare. It seems a disconnect between the industries exists where in construction the high number of non-uniform work tasks, the wide assortment of types and shapes of building materials and elements, and the presence of human workers creating safety hazards make the deployment of rather rigid robotic manipulators on construction sites much more complex than in production-like work environments. To advance construction with robotic solutions, it could prove beneficial to make each sector aware of the barriers that exist, and likewise, introduce a physical space for joint experimentation with state-of-the-art technologies from both fields. One way of alleviating this issue is to connect the sectors by providing hands-on education and research experiences, defined hereby as Learning Factory for Construction (LFC). This paper presents a scaled-down version of a LFC that has a robotic manipulator perform fully-automated and precise assembly, deconstruction, and reuse tasks of modular construction elements, whereas the elements are tracked with fiducial markers according to a known building information model and schedule. Furthermore, the FLC continuously gathers and analyzes data for performance, measures successful completions, assembly times, and potential quality defects. This project involved Masters level students with domain expertise from architectural, civil, and mechanical engineering in a cross-disciplinary and collaborative learning exercise of building a working prototype within a semester-long study project. Beyond the core tasks of the digital design and robotic application, the group developed theoretical concepts and limitations for more holistic views on circular economy, lean production, on- and off-site logistics, modularization, and construction safety, just as expected from a LFC. It is anticipated that the next generation of professionals working in the built environment and intending to solve some of the larger and more complex societal problems will require both the technical and communication skills that a LFC can stimulate. Therefore, LFC is expected to become an important component of active learning environments