Lamis Abdul Hameed Al-Taee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lamis Abdul Hameed Al-Taee has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Avijit Banerjee
Centre of Oral Clinical Translational Sciences / Conservative & MI Dentistry, Faculty of Dentistry, Oral & Craniofacial Sciences, King's College London, UK
6 shared publications - Danya Hashem
Department of Restorative Dental Science, College of Dentistry, Taibah University, Madinah, Saudi Arabia
5 shared publications - Khaled Elsayed Ahmed
Melbourne Dental School, University of Melbourne, Melbourne, Australia
4 shared publications - Shatha Abdul Wadood Al-Shammaree
Department of Chemistry, College of Science, University of Baghdad, Baghdad, Iraq
3 shared publications - Ali J. Addie
Centre of Industrial Applications and Materials Technology, Scientific Research Commission, Baghdad, Iraq
2 shared publications - Huda Al-Badri
College of Dentistry, AlShaab University, Baghdad, Iraq
2 shared publications
Latest Publications
- Open Access
- 15 October 2026
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 17 (10) , 516
Bond Strength of 10-MDP-Containing Adhesives Following Pre-Operative and Post-Operative Dental Bleaching: An In Vitro Study
Dental bleaching may compromise resin–tooth bonding, while functional monomers and post-bleaching strategies may influence adhesive performance. This study assessed the micro-tensile bond strength (µTBS) of a 10-MDP-containing versus a non-10-MDP-containing adhesive on enamel and dentine following hydrogen peroxide (HP) or carbamide peroxide (CP) bleaching performed before bonding or after restoration aging. Forty human molars yielded 400 beams for µTBS testing. For pre-operative bleaching, specimens received 32% HP or 35% CP and were bonded immediately, after a one-week delay, or immediately after sodium ascorbate (SA) application. For post-operative bleaching, bonded specimens were aged for three months before HP or CP bleaching; non-bleached specimens served as controls. Failure modes were assessed stereomicroscopically, and data were analyzed using four-way ANOVA. The tested 10-MDP-containing adhesive showed higher µTBS across experimental groups. HP produced higher µTBS in SA-treated and post-operative groups with the 10-MDP-containing adhesive, whereas CP produced higher µTBS after a one-week delay. Immediate bonding after bleaching produced the lowest µTBS values. Within the study conditions, bond strength was influenced by adhesive system, bleaching protocol, and bonding timing; SA after HP and delayed bonding after CP were associated with more favorable outcomes.
- 15 October 2026
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 17 (10) , 516
Open AccessBond Strength of 10-MDP-Containing Adhesives Following Pre-Operative and Post-Operative Dental Bleaching: An In Vitro Study
Dental bleaching may compromise resin–tooth bonding, while functional monomers and post-bleaching strategies may influence adhesive performance. This study assessed the micro-tensile bond strength (µTBS) of a 10-MDP-containing versus a non-10-MDP-containing adhesive on enamel and dentine following hydrogen peroxide (HP) or carbamide peroxide (CP) bleaching performed before bonding or after restoration aging. Forty human molars yielded 400 beams for µTBS testing. For pre-operative bleaching, specimens received 32% HP or 35% CP and were bonded immediately, after a one-week delay, or immediately after sodium ascorbate (SA) application. For post-operative bleaching, bonded specimens were aged for three months before HP or CP bleaching; non-bleached specimens served as controls. Failure modes were assessed stereomicroscopically, and data were analyzed using four-way ANOVA. The tested 10-MDP-containing adhesive showed higher µTBS across experimental groups. HP produced higher µTBS in SA-treated and post-operative groups with the 10-MDP-containing adhesive, whereas CP produced higher µTBS after a one-week delay. Immediate bonding after bleaching produced the lowest µTBS values. Within the study conditions, bond strength was influenced by adhesive system, bleaching protocol, and bonding timing; SA after HP and delayed bonding after CP were associated with more favorable outcomes.
- Open Access
- 3 May 2026
- Published by Elsevier in Journal of Dentistry
- Vol. 171, 106734
In vitro assessment of the antibacterial properties of novel chemomechanical caries removal agents and their impact on bonding performance to resin composite restorations
- 3 May 2026
- Published by Elsevier in Journal of Dentistry
- Vol. 171, 106734
Open AccessIn vitro assessment of the antibacterial properties of novel chemomechanical caries removal agents and their impact on bonding performance to resin composite restorations
- Open Access
- 10 April 2026
- Published by Georg Thieme Verlag KG in European Journal of Dentistry
A Biomimetic Approach for Treating Deep Dentin Carious Lesions Using Dentin Matrix Protein (DMP-1): An In Vitro Comparative Study
To evaluate the potential of a phosphoprotein analogue to mediate mineral deposition and enhance surface integrity in deep carious dentin lesions, compared with mineral trioxide aggregate (MTA) and Sylc air abrasion. Thirty carious dentin discs (3.5 ± 0.1 mm in thickness) were prepared and examined visually (ranging from yellow to light brown), through tactile assessment (leathery sensation), with 0–20 DIAGNOdent pen readings indicating caries-affected dentin (CAD) substrate. The specimens received three treatments: dentin matrix protein-1 (DMP-1, MCE, United States), MTA (Angelus, Brazil), and Sylc air abrasion (AquaCare, United Kingdom), and were immersed in artificial saliva (pH 7, 37°C) for 30 days. Fourier-transform infrared spectroscopy (FTIR) and contact angle measurement were performed on DMP-1. The mineral and organic content was assessed using Raman micro-spectroscopy, while cross-sectional tissue hardness was evaluated by a Vickers tester at 50 and 100 µm depth from the treated surfaces. The morphological assessment was conducted using scanning electron microscopy (SEM). One-way ANOVA followed by Tukey's multiple comparison test and paired t-test were performed for the statistical analyses. The FTIR spectra of DMP-1 displayed the amide bands associated with carbonyl and N–H stretching vibrations, in addition to the phosphate band. DMP-1 exhibited good wettability (contact angle of 27°), and enhanced the phosphate and organic content and tissue hardness of the treated CAD surfaces compared with pretreatment values (p < 0.05). Meanwhile, the MTA-treated surface demonstrated the highest phosphate content and Vickers hardness number up to 100 µm (p = 0.005). The SEM showed compact surfaces completely covered with mineral precipitation. DMP-1 provided a successful biomimetic analogue that enhanced the mineral–organic phases of mineral-depleted dentin surfaces, offering an effective treatment modality for deep carious lesions compared with MTA and Sylc air abrasion.
- 10 April 2026
- Published by Georg Thieme Verlag KG in European Journal of Dentistry
Open AccessA Biomimetic Approach for Treating Deep Dentin Carious Lesions Using Dentin Matrix Protein (DMP-1): An In Vitro Comparative Study
To evaluate the potential of a phosphoprotein analogue to mediate mineral deposition and enhance surface integrity in deep carious dentin lesions, compared with mineral trioxide aggregate (MTA) and Sylc air abrasion. Thirty carious dentin discs (3.5 ± 0.1 mm in thickness) were prepared and examined visually (ranging from yellow to light brown), through tactile assessment (leathery sensation), with 0–20 DIAGNOdent pen readings indicating caries-affected dentin (CAD) substrate. The specimens received three treatments: dentin matrix protein-1 (DMP-1, MCE, United States), MTA (Angelus, Brazil), and Sylc air abrasion (AquaCare, United Kingdom), and were immersed in artificial saliva (pH 7, 37°C) for 30 days. Fourier-transform infrared spectroscopy (FTIR) and contact angle measurement were performed on DMP-1. The mineral and organic content was assessed using Raman micro-spectroscopy, while cross-sectional tissue hardness was evaluated by a Vickers tester at 50 and 100 µm depth from the treated surfaces. The morphological assessment was conducted using scanning electron microscopy (SEM). One-way ANOVA followed by Tukey's multiple comparison test and paired t-test were performed for the statistical analyses. The FTIR spectra of DMP-1 displayed the amide bands associated with carbonyl and N–H stretching vibrations, in addition to the phosphate band. DMP-1 exhibited good wettability (contact angle of 27°), and enhanced the phosphate and organic content and tissue hardness of the treated CAD surfaces compared with pretreatment values (p < 0.05). Meanwhile, the MTA-treated surface demonstrated the highest phosphate content and Vickers hardness number up to 100 µm (p = 0.005). The SEM showed compact surfaces completely covered with mineral precipitation. DMP-1 provided a successful biomimetic analogue that enhanced the mineral–organic phases of mineral-depleted dentin surfaces, offering an effective treatment modality for deep carious lesions compared with MTA and Sylc air abrasion.
- Open Access
- 21 January 2026
- Published by Elsevier in Dental Materials
- Vol. 42 (5) , 852-862
An in vitro assessment of novel glass ionomer cements containing succinic anhydride-modified polyvinyl alcohol polymer (PVA-SA) and bioactive compounds
- 21 January 2026
- Published by Elsevier in Dental Materials
- Vol. 42 (5) , 852-862
Open AccessAn in vitro assessment of novel glass ionomer cements containing succinic anhydride-modified polyvinyl alcohol polymer (PVA-SA) and bioactive compounds
- Open Access
- 5 September 2025
- Published by MDPI AG in Dentistry Journal
- Vol. 13 (9) , 408
Biomechanical and Morphological Analyses of Enamel White Spot Lesions Treated by Different Therapeutic Approaches (In Vitro Comparative Study)
Background/Objectives: Within the minimum intervention oral care (MIOC) delivery framework, the management and improvement in the esthetics of enamel white spot lesions (WSLs) are recommended. This study evaluated the chemomechanical and morphological characteristics of WSLs treated by four therapeutic approaches using Raman spectroscopy, Knoop microhardness (KH), and field-emission scanning electron microscopy (FESEM). Methods: Sixty human enamel slabs were divided into six groups: non-treated (baseline), WSLs (8% methylcellulose gel with 0.1 M lactic acid, pH 4.6 at 37 °C for 21 days), and four treated groups, namely bovine collagen supplement (Nutravita Ltd., Maidenhead, Berkshire, UK), Regenerate system (NR-5, Bordeaux, France), Sylc air abrasion (AquaCare, Denfotex Research Ltd., Edinburgh, UK), and CO2 laser (JHC1180, Jinan, China). Treatment lasted 28 days, followed by four weeks of storage in artificial saliva (pH = 7.0, 37 °C). Bovine collagen was analyzed using Fourier-Transform Infrared Spectroscopy (FTIR). The mineral content, including the phosphate peak intensities (PO4 ν1, ν2, and ν4) and carbonate (CO3), as well as tissue microhardness, were assessed at varying depths (50–200 µm), followed by morphological assessment. Results: The FTIR spectrum of bovine collagen powder confirms the presence of amide I, II, and III. It produced a statistically significant enhancement in the phosphate content and KHN compared to WSLs of up to 150 µm in depth (p < 0.001). Regenerate-treated surfaces recorded the highest phosphate content among groups at the superficial layer. All treatment interventions enhanced the morphology of lesions by covering the exposed prisms and inter-prismatic structure. Conclusions: Bovine collagen supplements can enhance the phosphate content and surface properties of enamel white spot lesions (WSLs) and could be considered a potential modality comparable to other micro-invasive approaches for addressing incipient enamel lesions. This could significantly impact dental care management.
- 5 September 2025
- Published by MDPI AG in Dentistry Journal
- Vol. 13 (9) , 408
Open AccessBiomechanical and Morphological Analyses of Enamel White Spot Lesions Treated by Different Therapeutic Approaches (In Vitro Comparative Study)
Background/Objectives: Within the minimum intervention oral care (MIOC) delivery framework, the management and improvement in the esthetics of enamel white spot lesions (WSLs) are recommended. This study evaluated the chemomechanical and morphological characteristics of WSLs treated by four therapeutic approaches using Raman spectroscopy, Knoop microhardness (KH), and field-emission scanning electron microscopy (FESEM). Methods: Sixty human enamel slabs were divided into six groups: non-treated (baseline), WSLs (8% methylcellulose gel with 0.1 M lactic acid, pH 4.6 at 37 °C for 21 days), and four treated groups, namely bovine collagen supplement (Nutravita Ltd., Maidenhead, Berkshire, UK), Regenerate system (NR-5, Bordeaux, France), Sylc air abrasion (AquaCare, Denfotex Research Ltd., Edinburgh, UK), and CO2 laser (JHC1180, Jinan, China). Treatment lasted 28 days, followed by four weeks of storage in artificial saliva (pH = 7.0, 37 °C). Bovine collagen was analyzed using Fourier-Transform Infrared Spectroscopy (FTIR). The mineral content, including the phosphate peak intensities (PO4 ν1, ν2, and ν4) and carbonate (CO3), as well as tissue microhardness, were assessed at varying depths (50–200 µm), followed by morphological assessment. Results: The FTIR spectrum of bovine collagen powder confirms the presence of amide I, II, and III. It produced a statistically significant enhancement in the phosphate content and KHN compared to WSLs of up to 150 µm in depth (p < 0.001). Regenerate-treated surfaces recorded the highest phosphate content among groups at the superficial layer. All treatment interventions enhanced the morphology of lesions by covering the exposed prisms and inter-prismatic structure. Conclusions: Bovine collagen supplements can enhance the phosphate content and surface properties of enamel white spot lesions (WSLs) and could be considered a potential modality comparable to other micro-invasive approaches for addressing incipient enamel lesions. This could significantly impact dental care management.
- Open Access
- 11 August 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 29394
An in vitro evaluation of the mineralization effect of a marine collagen supplement on early enamel lesions
The marine collagens are biocompatible and biodegradable materials that are considered as a biomimetic approach for tissue regeneration. This study evaluated the effect of daily consumption of marine collagen supplement drink on enamel white spot lesions (WSLs), comparing the results against Regenerate system and Sylc air abrasion methods. Fifty human enamel slabs were allocated into five groups (n = 10 per group): non-treated (sound); non-treated (WSLs, 8% methylcellulose gel with 0.1 M lactic acid (pH 4.6) at 37 °C for 21 days); and three treated surfaces with marine collagen; Regenerate system; and Sylc air abrasion. The treatment lasted for 28 days followed by four weeks' storage in artificial saliva (pH = 7.0, 37 °C). Evaluations were conducted via micro-Raman Spectroscopy and Knoop microhardness at varying depths (50-200 μm), followed by morphological assessments using scanning electron microscopy (SEM). The marine collagen-treated surfaces demonstrated higher phosphate intensity and Knoop hardness values (KHN) compared to WSLs (p < 0.001) up to 150 μm depth, approaching that of sound enamel and other treated surfaces (p > 0.05). A significant positive correlation (p > 0.001) was recognized between the mineral content and corresponding KHN, particularly in the superficial layers. Notably, a compact layer of mineral-like structure was observed at the marine-treated surfaces covering the exposed lesion and enhancing surface integrity. These findings suggest that the use of marine collagen supplements can effectively enhance the mineral content and surface integrity of demineralized enamel surfaces up to a depth of 150 μm, presenting significant implications for dental health management.
- 11 August 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 29394
Open AccessAn in vitro evaluation of the mineralization effect of a marine collagen supplement on early enamel lesions
The marine collagens are biocompatible and biodegradable materials that are considered as a biomimetic approach for tissue regeneration. This study evaluated the effect of daily consumption of marine collagen supplement drink on enamel white spot lesions (WSLs), comparing the results against Regenerate system and Sylc air abrasion methods. Fifty human enamel slabs were allocated into five groups (n = 10 per group): non-treated (sound); non-treated (WSLs, 8% methylcellulose gel with 0.1 M lactic acid (pH 4.6) at 37 °C for 21 days); and three treated surfaces with marine collagen; Regenerate system; and Sylc air abrasion. The treatment lasted for 28 days followed by four weeks' storage in artificial saliva (pH = 7.0, 37 °C). Evaluations were conducted via micro-Raman Spectroscopy and Knoop microhardness at varying depths (50-200 μm), followed by morphological assessments using scanning electron microscopy (SEM). The marine collagen-treated surfaces demonstrated higher phosphate intensity and Knoop hardness values (KHN) compared to WSLs (p < 0.001) up to 150 μm depth, approaching that of sound enamel and other treated surfaces (p > 0.05). A significant positive correlation (p > 0.001) was recognized between the mineral content and corresponding KHN, particularly in the superficial layers. Notably, a compact layer of mineral-like structure was observed at the marine-treated surfaces covering the exposed lesion and enhancing surface integrity. These findings suggest that the use of marine collagen supplements can effectively enhance the mineral content and surface integrity of demineralized enamel surfaces up to a depth of 150 μm, presenting significant implications for dental health management.
- Open Access
- 20 June 2025
- Published by Elsevier in Journal of Dentistry
- Vol. 160, 105922
Influence of zirconia thickness and background color on color matching accuracy of monolithic zirconia restorations
- 20 June 2025
- Published by Elsevier in Journal of Dentistry
- Vol. 160, 105922
Open AccessInfluence of zirconia thickness and background color on color matching accuracy of monolithic zirconia restorations
- Open Access
- 19 August 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-12
An in-vitro evaluation of residual dentin retained after using novel enzymatic-based chemomechanical caries removal agents
To assess the biochemical, mechanical and structural characteristics of retained dentin after applying three novel bromelain-contained chemomechanical caries removal (CMCR) formulations in comparison to the conventional excavation methods (hand and rotary) and a commercial papain-contained gel (Brix 3000). Seventy-two extracted permanent molars with natural occlusal carious lesions (score > 4 following the International Caries Detection and Assessment System (ICDAS-II)) were randomly allocated into six groups (n = 12) according to the excavation methods: hand excavation, rotary excavation, Brix 3000, bromelain-contained gel (F1), bromelain-chloramine-T (F2), and bromelain-chlorhexidine gel (F3). The superficial and deeper layers of residual dentin were examined by Raman microspectroscopy and Vickers microhardness, while the surface morphology was assessed by the scanning electron microscope (SEM). A multivariate analysis of variance followed by Tukey’s test (p > 0.05) was performed for data analysis. The novel formulations showed an ability to preserve the partially demineralized dentin that showed a reduced phosphate content with a higher organic matrix. This was associated with lower Vickers microhardness values in comparison to sound dentin and rotary excavation. The collagen integration ratio in all methods was close to sound dentin (0.9–1.0) at the deeper dentin layer. The bromelain-chloramine-T gel (F2) produced the smoothest smear-free dentin surface with a higher number of opened dentinal tubules. In contrast, dense smearing covering the remaining dentin was observed in the manual and rotary methods with obstructed dentin tubule orifices. The bromelain-contained formulations can be considered a new minimally invasive approach for selectively removing caries in deep cavitated dentin lesions.
- 19 August 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-12
Open AccessAn in-vitro evaluation of residual dentin retained after using novel enzymatic-based chemomechanical caries removal agents
To assess the biochemical, mechanical and structural characteristics of retained dentin after applying three novel bromelain-contained chemomechanical caries removal (CMCR) formulations in comparison to the conventional excavation methods (hand and rotary) and a commercial papain-contained gel (Brix 3000). Seventy-two extracted permanent molars with natural occlusal carious lesions (score > 4 following the International Caries Detection and Assessment System (ICDAS-II)) were randomly allocated into six groups (n = 12) according to the excavation methods: hand excavation, rotary excavation, Brix 3000, bromelain-contained gel (F1), bromelain-chloramine-T (F2), and bromelain-chlorhexidine gel (F3). The superficial and deeper layers of residual dentin were examined by Raman microspectroscopy and Vickers microhardness, while the surface morphology was assessed by the scanning electron microscope (SEM). A multivariate analysis of variance followed by Tukey’s test (p > 0.05) was performed for data analysis. The novel formulations showed an ability to preserve the partially demineralized dentin that showed a reduced phosphate content with a higher organic matrix. This was associated with lower Vickers microhardness values in comparison to sound dentin and rotary excavation. The collagen integration ratio in all methods was close to sound dentin (0.9–1.0) at the deeper dentin layer. The bromelain-chloramine-T gel (F2) produced the smoothest smear-free dentin surface with a higher number of opened dentinal tubules. In contrast, dense smearing covering the remaining dentin was observed in the manual and rotary methods with obstructed dentin tubule orifices. The bromelain-contained formulations can be considered a new minimally invasive approach for selectively removing caries in deep cavitated dentin lesions.
- Open Access
- 26 March 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-12
An in vitro assessment of the residual dentin after using three minimally invasive caries removal techniques
To evaluate the efficiency and effectiveness of three minimally invasive (MI) techniques in removing deep dentin carious lesions. Forty extracted carious molars were treated by conventional rotary excavation (control), chemomechanical caries removal agent (Brix 3000), ultrasonic abrasion (WOODPECKER, GUILIN, China); and Er, Cr: YSGG laser ablation (BIOLASE San Clemente, CA, USA). The assessments include; the excavation time, DIAGNOdent pen, Raman spectroscopy, Vickers microhardness, and scanning electron microscope combined with energy dispersive X-ray spectroscopy (SEM–EDX). The rotary method recorded the shortest excavation time (p < 0.001), Brix 3000 gel was the slowest. DIAGNOdent pen values ranged between 14 and 18 in the remaining dentin and laser-ablated surfaces recorded the lowest reading (p < 0.001). The Ca:P ratios of the remaining dentin were close to sound dentin after all excavation methods; however, it was higher in the ultrasonic technique (p < 0.05). The bur-excavated dentin showed higher phosphate and lower matrix contents with higher tissue hardness that was comparable to sound dentin indicating the non-selectiveness of this technique in removing the potentially repairable dentin tissue. In contrast, the MI techniques exhibited lower phosphate and higher organic contents associated with lower microhardness in the deeper dentin layers. This was associated with smooth residual dentin without smearing and patent dentinal tubules. This study supports the efficiency of using MI methods in caries removal as conservative alternatives to rotary excavation, providing a promising strategy for the clinical dental practice.
- 26 March 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-12
Open AccessAn in vitro assessment of the residual dentin after using three minimally invasive caries removal techniques
To evaluate the efficiency and effectiveness of three minimally invasive (MI) techniques in removing deep dentin carious lesions. Forty extracted carious molars were treated by conventional rotary excavation (control), chemomechanical caries removal agent (Brix 3000), ultrasonic abrasion (WOODPECKER, GUILIN, China); and Er, Cr: YSGG laser ablation (BIOLASE San Clemente, CA, USA). The assessments include; the excavation time, DIAGNOdent pen, Raman spectroscopy, Vickers microhardness, and scanning electron microscope combined with energy dispersive X-ray spectroscopy (SEM–EDX). The rotary method recorded the shortest excavation time (p < 0.001), Brix 3000 gel was the slowest. DIAGNOdent pen values ranged between 14 and 18 in the remaining dentin and laser-ablated surfaces recorded the lowest reading (p < 0.001). The Ca:P ratios of the remaining dentin were close to sound dentin after all excavation methods; however, it was higher in the ultrasonic technique (p < 0.05). The bur-excavated dentin showed higher phosphate and lower matrix contents with higher tissue hardness that was comparable to sound dentin indicating the non-selectiveness of this technique in removing the potentially repairable dentin tissue. In contrast, the MI techniques exhibited lower phosphate and higher organic contents associated with lower microhardness in the deeper dentin layers. This was associated with smooth residual dentin without smearing and patent dentinal tubules. This study supports the efficiency of using MI methods in caries removal as conservative alternatives to rotary excavation, providing a promising strategy for the clinical dental practice.
- Open Access
- 9 November 2023
- Published by Springer Nature in Research Square
An in vitro assessment of the residual dentin after using three minimally invasive caries removal techniques
To evaluate the efficiency and effectiveness of three minimally invasive MI caries removal techniques for removing deep dentin carious lesions. Forty extracted carious molars were treated by conventional rotary excavation (control), chemomechanical agent (Brix 3000), ultrasonic abrasion (Woodpecker, Guilin, China); and Er, Cr: YSGG laser (Biolase™ San Clemente, CA). The assessments include; the excavation time, Diagnodent pen, Raman spectroscopy, Vickers microhardness, and scanning electron microscope combined with energy dispersive X-ray spectroscopy (SEM-EDX). The rotary method recorded the shortest excavation time (p < 0.000), Brix 3000 gel was the slowest. All techniques removed the infected tissues completely as the Diagnodent pen readings were < 20 and laser-ablated surfaces recorded the lowest reading. The bur-excavated dentin showed higher phosphate and lower matrix contents with higher tissue hardness that were comparable to sound dentin indicating the non-selectiveness of this technique in removing the potentially repairable dentin tissue. In contrast, the MI techniques exhibited lower phosphate and higher organic contents associated with lower microhardness in the deeper dentin layers. This was associated with smooth residual dentin without smearing and patent dentinal tubules. This study supports the efficiency of these MI methods to be a conservative alternative to rotary excavation, providing a promising strategy for the clinical dental practice.
- 9 November 2023
- Published by Springer Nature in Research Square
Open AccessAn in vitro assessment of the residual dentin after using three minimally invasive caries removal techniques
To evaluate the efficiency and effectiveness of three minimally invasive MI caries removal techniques for removing deep dentin carious lesions. Forty extracted carious molars were treated by conventional rotary excavation (control), chemomechanical agent (Brix 3000), ultrasonic abrasion (Woodpecker, Guilin, China); and Er, Cr: YSGG laser (Biolase™ San Clemente, CA). The assessments include; the excavation time, Diagnodent pen, Raman spectroscopy, Vickers microhardness, and scanning electron microscope combined with energy dispersive X-ray spectroscopy (SEM-EDX). The rotary method recorded the shortest excavation time (p < 0.000), Brix 3000 gel was the slowest. All techniques removed the infected tissues completely as the Diagnodent pen readings were < 20 and laser-ablated surfaces recorded the lowest reading. The bur-excavated dentin showed higher phosphate and lower matrix contents with higher tissue hardness that were comparable to sound dentin indicating the non-selectiveness of this technique in removing the potentially repairable dentin tissue. In contrast, the MI techniques exhibited lower phosphate and higher organic contents associated with lower microhardness in the deeper dentin layers. This was associated with smooth residual dentin without smearing and patent dentinal tubules. This study supports the efficiency of these MI methods to be a conservative alternative to rotary excavation, providing a promising strategy for the clinical dental practice.