Hong-Chao Xue
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Hong-Chao Xue has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Liang Chen
Laboratory of Aerodynamics in Multiple Flow Regimes, China Aerodynamics Research and Development Center, Mianyang 621000, P.R. China
4 shared publications - Yue Zhang
Nanjing University of Aeronautics and Astronautics
4 shared publications - Ziyun Wang
School of Power and Energy, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
4 shared publications Hui-Jun Tan
3 shared publications- Huijun Tan
Nanjing University of Aeronautics and Astronautics
2 shared publications Hang Yu
1 shared publication
Latest Publications
- 1 December 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (12)
Study on continuous incident compression waves/turbulent boundary layer interaction under the influence of an expansion corner
Numerical simulations were employed to investigate incident compression waves/boundary layer interactions under the influence of an expansion corner abstracted from high-speed supersonic inlets. As the incident compression waves migrate from upstream to downstream of the expansion corner, three distinct interaction patterns are identified based on the relative positions between the expansion corner and the incident compression waves, including interaction type I where the tailing compression wave remains upstream of the expansion corner, interaction type II where the expansion corner lies between the leading and tailing compression waves, and interaction type III where the leading compression wave impinges downstream of the expansion corner. Under inviscid conditions, the pressure distribution characteristics and the range of the incident compression waves along the wall were obtained for each interaction type, with predictive models for the range in interaction types II and III established through supersonic relations. Viscous simulations demonstrated that varying expansion corner angles and interaction types significantly affect wave structures around separation zones, pressure distribution characteristics, and separation zone scale. Pressure distributions conform to typical separated flow features for large separation cases. The separation zone scale showed consistent initial reduction followed by enlargement across different corner angles, which was explained by the inviscid analysis of the range of incident compression waves. Crucially, the relative positions between the sonic line and the wall were identified as a paramount factor for wave structures, enabling the development of flow models that elucidate the formation mechanisms of various wave patterns surrounding separation zones.
- 1 December 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (12)
Study on continuous incident compression waves/turbulent boundary layer interaction under the influence of an expansion corner
Numerical simulations were employed to investigate incident compression waves/boundary layer interactions under the influence of an expansion corner abstracted from high-speed supersonic inlets. As the incident compression waves migrate from upstream to downstream of the expansion corner, three distinct interaction patterns are identified based on the relative positions between the expansion corner and the incident compression waves, including interaction type I where the tailing compression wave remains upstream of the expansion corner, interaction type II where the expansion corner lies between the leading and tailing compression waves, and interaction type III where the leading compression wave impinges downstream of the expansion corner. Under inviscid conditions, the pressure distribution characteristics and the range of the incident compression waves along the wall were obtained for each interaction type, with predictive models for the range in interaction types II and III established through supersonic relations. Viscous simulations demonstrated that varying expansion corner angles and interaction types significantly affect wave structures around separation zones, pressure distribution characteristics, and separation zone scale. Pressure distributions conform to typical separated flow features for large separation cases. The separation zone scale showed consistent initial reduction followed by enlargement across different corner angles, which was explained by the inviscid analysis of the range of incident compression waves. Crucially, the relative positions between the sonic line and the wall were identified as a paramount factor for wave structures, enabling the development of flow models that elucidate the formation mechanisms of various wave patterns surrounding separation zones.
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
Control of incident shock wave/boundary layer interaction by concave surface
The separation induced by incident shock wave/boundary layer interaction (ISWBLI) in supersonic/hypersonic inlets significantly degrades aerodynamic performance. This study proposes a novel passive control method for ISWBLI by using a concave surface. Numerical simulations were employed to elucidate the flowfield under the influence of the concave surface, thereby validating the effectiveness of the control method. The results demonstrate that the concave surface generates beneficial expansion waves and precompression effects, which collectively attenuate the separation region both upstream and downstream of the shock impingement point. Specifically, the results show substantial separation size reduction, with upstream concave surface placement achieving 49.1% suppression and downstream configuration yielding 39% reduction. The near wall airflow exhibits distinct interaction patterns depending on geometric positioning. The effectiveness of control is observed in two distinct regions. The first effective region occurs when the initial position of the concave surface is located upstream of the reattachment point of the separation region, extending until the shock impingement point reaches the leeward expansion side. The second region is characterized by the shock impingement point being situated on the windward expansion side, continuing until the end position of the concave surface is downstream of the separation point. Conversely, shock impingement on the concave compression surface intensifies shock strength and exacerbates separation. A critical finding reveals that maximal mitigation of the adverse pressure gradient occurs when the shock impingement point is displaced a distance d1 from the initiation point of the concave surface, or proximate to the end of the concave surface.
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
Control of incident shock wave/boundary layer interaction by concave surface
The separation induced by incident shock wave/boundary layer interaction (ISWBLI) in supersonic/hypersonic inlets significantly degrades aerodynamic performance. This study proposes a novel passive control method for ISWBLI by using a concave surface. Numerical simulations were employed to elucidate the flowfield under the influence of the concave surface, thereby validating the effectiveness of the control method. The results demonstrate that the concave surface generates beneficial expansion waves and precompression effects, which collectively attenuate the separation region both upstream and downstream of the shock impingement point. Specifically, the results show substantial separation size reduction, with upstream concave surface placement achieving 49.1% suppression and downstream configuration yielding 39% reduction. The near wall airflow exhibits distinct interaction patterns depending on geometric positioning. The effectiveness of control is observed in two distinct regions. The first effective region occurs when the initial position of the concave surface is located upstream of the reattachment point of the separation region, extending until the shock impingement point reaches the leeward expansion side. The second region is characterized by the shock impingement point being situated on the windward expansion side, continuing until the end position of the concave surface is downstream of the separation point. Conversely, shock impingement on the concave compression surface intensifies shock strength and exacerbates separation. A critical finding reveals that maximal mitigation of the adverse pressure gradient occurs when the shock impingement point is displaced a distance d1 from the initiation point of the concave surface, or proximate to the end of the concave surface.
- Open Access
- 9 October 2024
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 129 (1332) , 395-410
Analysis of the impact of key similarity criteria numbers of TBCC inlet during the mode transition
A simplified configuration was developed to facilitate the mode transition process within an over-under Turbine-Based Combined Cycle (TBCC) inlet. Leveraging dynamic mesh technology, an unsteady numerical simulation of the mode transition was conducted, emphasising the flow characteristics of the mode transition and the impact of key similarity criteria numbers. The findings indicate that at an incoming Mach number of 2.0, the mode transition is paired with a continuous alteration in the capture mass flow of the high-speed duct. This continual change instigates the inlet unstarting, with subsequent flow characteristics being contingent on the historical effect, exhibiting a degree of hysteresis characteristics. When the scale effect is considered, it is observed that a larger model scale results in higher Reynolds (Re) and Strouhal (St) numbers. This directly contributes to a notable delay in the unstart moment, a decrease in the unstart interval, and an enlargement of the hysteresis loop. An examination of control variables reveals that the Re number marginally influences mode transition characteristics, while the St number’s effect constitutes approximately 90% of the scale effect. This conclusively demonstrates that the St number is the predominant similarity criterion number in the mode transition process.
- 9 October 2024
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 129 (1332) , 395-410
Open AccessAnalysis of the impact of key similarity criteria numbers of TBCC inlet during the mode transition
A simplified configuration was developed to facilitate the mode transition process within an over-under Turbine-Based Combined Cycle (TBCC) inlet. Leveraging dynamic mesh technology, an unsteady numerical simulation of the mode transition was conducted, emphasising the flow characteristics of the mode transition and the impact of key similarity criteria numbers. The findings indicate that at an incoming Mach number of 2.0, the mode transition is paired with a continuous alteration in the capture mass flow of the high-speed duct. This continual change instigates the inlet unstarting, with subsequent flow characteristics being contingent on the historical effect, exhibiting a degree of hysteresis characteristics. When the scale effect is considered, it is observed that a larger model scale results in higher Reynolds (Re) and Strouhal (St) numbers. This directly contributes to a notable delay in the unstart moment, a decrease in the unstart interval, and an enlargement of the hysteresis loop. An examination of control variables reveals that the Re number marginally influences mode transition characteristics, while the St number’s effect constitutes approximately 90% of the scale effect. This conclusively demonstrates that the St number is the predominant similarity criterion number in the mode transition process.
- 1 August 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (8)
Investigation of the impact of splitter rotation speed on mode transition characteristics of an over-under turbine-based combined cycle inlet
This paper presents the findings of a wind tunnel experiment aimed at investigating the mode transition process of a two-dimensional over-under turbine-based combined cycle inlet at an incoming flow Mach number of 2.9. The study utilized high-speed schlieren and dynamic pressure acquisition systems to examine the evolution process of the shock-dominated flow structure of the high-speed duct during the mode transition process. Additionally, the impact of mode transition speed on the unstart/restart characteristics of the high-speed duct was analyzed. The results indicate that, during the forward mode transition process, the increasing captured airflow of the high-speed duct leads to a higher number of shock reflections and the shock train moves forward in the duct, ultimately resulting in unstart. The unstarting flow field exhibits a small oscillation characteristic dominated by the separation bubble located at the entrance. However, evident hysteresis characteristics were observed in the restart process during the reverse transition. Furthermore, a higher mode transition speed delays the unstart and restart of the high-speed duct, consequently increasing the hysteresis interval. Theoretical analysis suggests that a larger mode transition speed leads to lower mass accumulation efficiency in the high-speed duct, thereby slowing the pressure response and causing the shock train to lag forward, resulting in delayed unstart. The delay in the restart process is attributed to the relative slip motion of the separation bubble with the upper surface of the splitter, in addition to its forced motion.
- 1 August 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (8)
Investigation of the impact of splitter rotation speed on mode transition characteristics of an over-under turbine-based combined cycle inlet
This paper presents the findings of a wind tunnel experiment aimed at investigating the mode transition process of a two-dimensional over-under turbine-based combined cycle inlet at an incoming flow Mach number of 2.9. The study utilized high-speed schlieren and dynamic pressure acquisition systems to examine the evolution process of the shock-dominated flow structure of the high-speed duct during the mode transition process. Additionally, the impact of mode transition speed on the unstart/restart characteristics of the high-speed duct was analyzed. The results indicate that, during the forward mode transition process, the increasing captured airflow of the high-speed duct leads to a higher number of shock reflections and the shock train moves forward in the duct, ultimately resulting in unstart. The unstarting flow field exhibits a small oscillation characteristic dominated by the separation bubble located at the entrance. However, evident hysteresis characteristics were observed in the restart process during the reverse transition. Furthermore, a higher mode transition speed delays the unstart and restart of the high-speed duct, consequently increasing the hysteresis interval. Theoretical analysis suggests that a larger mode transition speed leads to lower mass accumulation efficiency in the high-speed duct, thereby slowing the pressure response and causing the shock train to lag forward, resulting in delayed unstart. The delay in the restart process is attributed to the relative slip motion of the separation bubble with the upper surface of the splitter, in addition to its forced motion.
- 20 September 2023
- Published by Elsevier in Aerospace Science and Technology
- Vol. 142
Experimental and numerical investigation of shock wave/boundary layer interactions induced by curved back-swept compression ramp
- 20 September 2023
- Published by Elsevier in Aerospace Science and Technology
- Vol. 142
Experimental and numerical investigation of shock wave/boundary layer interactions induced by curved back-swept compression ramp