Liming Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Liming Liu has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Hui You
School of Mechanical Engineering, Guangxi University, Nanning 530004, China
2 shared publications Chen Shao
1 shared publication- Chen Shao
School of Mechanical Engineering, Guangxi University, Nanning 530004, China
1 shared publication - Guojian Yang
School of Mechanical Engineering, Guangxi University, Nanning 530004, China
1 shared publication - Guojian Yang
School of Mechanical Engineering, Guangxi University, Nanning 530004, China
1 shared publication Hui You
1 shared publication
Latest Publications
- Open Access
Facile Preparation of Durable Photothermal-Responsive PDMS-CB Surfaces for Droplet Manipulation
To address the issues of complex fabrication and poor mechanical stability associated with traditional light-controlled interfaces, we developed a highly durable photothermal surface based on a polydimethylsiloxane (PDMS)—carbon black (CB) composite using spin-coating and laser ablation techniques. Under 600 W/m2 illumination, the 3 wt% PDMS-CB surface achieves a rapid photothermal response, reaching 104.7 °C within 150 s. Driven by a localized 0.5 W near-infrared laser, a 10 μL droplet exhibits high-speed transport at 6.53 mm/s. Uniquely, the platform enables flexible, programmable multi-modal maneuvers, including dynamic obstacle avoidance, controlled merging, and induced splitting by presetting the laser spot trajectory. At the same time, the coating surface exhibits excellent durability when subjected to external mechanical damage. Notably, because the photothermal-active CB is uniformly embedded within the durable PDMS matrix rather than superficially coated, the surface maintains reliable actuation performance (4.17 mm/s) even after multiple cyclic actuation experiments. This study provides a simple, robust solution with potential for multifunctional integration for advanced non-contact microfluidic control and lab on chip applications.
Open AccessFacile Preparation of Durable Photothermal-Responsive PDMS-CB Surfaces for Droplet Manipulation
To address the issues of complex fabrication and poor mechanical stability associated with traditional light-controlled interfaces, we developed a highly durable photothermal surface based on a polydimethylsiloxane (PDMS)—carbon black (CB) composite using spin-coating and laser ablation techniques. Under 600 W/m2 illumination, the 3 wt% PDMS-CB surface achieves a rapid photothermal response, reaching 104.7 °C within 150 s. Driven by a localized 0.5 W near-infrared laser, a 10 μL droplet exhibits high-speed transport at 6.53 mm/s. Uniquely, the platform enables flexible, programmable multi-modal maneuvers, including dynamic obstacle avoidance, controlled merging, and induced splitting by presetting the laser spot trajectory. At the same time, the coating surface exhibits excellent durability when subjected to external mechanical damage. Notably, because the photothermal-active CB is uniformly embedded within the durable PDMS matrix rather than superficially coated, the surface maintains reliable actuation performance (4.17 mm/s) even after multiple cyclic actuation experiments. This study provides a simple, robust solution with potential for multifunctional integration for advanced non-contact microfluidic control and lab on chip applications.
- Open Access
Metal-Based Slippery Surfaces with Micro-Channel Network Structures for Enhanced Anti-Icing and Antifouling Performance
In response to the significant challenges posed by ice accumulation and contamination from various fluids in complex operating conditions for metallic materials, this study utilises picosecond laser precision machining to develop a ‘slippery surface’ featuring a micro-channel network structure. The core innovation of this study lies in the use of laser-machined micrometre-scale array textures to overcome the limitations of traditional isolated pores. These globally interconnected micro-channels serve as highly efficient reservoirs and dynamic transport channels for lubricants, significantly enhancing the interfacial capillary locking force of the lubricant. Experimental results demonstrate that this unique network geometry endows the surface with exceptional fluid replenishment and self-healing properties, enabling it to exhibit outstanding broad-spectrum hydrophobicity towards various fluids—including water, crude oil and ethanol (surface tension range: 17.9–72.0 mN m−1)—with sliding angles consistently below 12°, whilst effectively slowing the dehydration and solidification processes of biological fluids. At a low temperature of −15 °C, the surface achieved an ice formation delay of up to 286 s, with an ice adhesion strength of only 33.9 kPa, ensuring that accumulated ice could be spontaneously detached under minimal external force. Furthermore, the micro-channel network structure serves as a key protective mechanism against mechanical wear, maintaining robust slippery properties even after three hours of high-pressure water jet scouring (Weber number of 300). This reliable interface, achieved through structural management, provides an efficient and scalable platform for addressing the all-weather anti-icing and antifouling requirements of outdoor infrastructure.
Open AccessMetal-Based Slippery Surfaces with Micro-Channel Network Structures for Enhanced Anti-Icing and Antifouling Performance
In response to the significant challenges posed by ice accumulation and contamination from various fluids in complex operating conditions for metallic materials, this study utilises picosecond laser precision machining to develop a ‘slippery surface’ featuring a micro-channel network structure. The core innovation of this study lies in the use of laser-machined micrometre-scale array textures to overcome the limitations of traditional isolated pores. These globally interconnected micro-channels serve as highly efficient reservoirs and dynamic transport channels for lubricants, significantly enhancing the interfacial capillary locking force of the lubricant. Experimental results demonstrate that this unique network geometry endows the surface with exceptional fluid replenishment and self-healing properties, enabling it to exhibit outstanding broad-spectrum hydrophobicity towards various fluids—including water, crude oil and ethanol (surface tension range: 17.9–72.0 mN m−1)—with sliding angles consistently below 12°, whilst effectively slowing the dehydration and solidification processes of biological fluids. At a low temperature of −15 °C, the surface achieved an ice formation delay of up to 286 s, with an ice adhesion strength of only 33.9 kPa, ensuring that accumulated ice could be spontaneously detached under minimal external force. Furthermore, the micro-channel network structure serves as a key protective mechanism against mechanical wear, maintaining robust slippery properties even after three hours of high-pressure water jet scouring (Weber number of 300). This reliable interface, achieved through structural management, provides an efficient and scalable platform for addressing the all-weather anti-icing and antifouling requirements of outdoor infrastructure.
- Open Access
Smart Superhydrophobic Surfaces with Reversible Thermochromism for On-Demand Photothermal Anti-Icing
Photothermal superhydrophobic surfaces represent a promising solution for passive anti-icing; however, the persistent high solar absorption of static black coatings often leads to undesirable overheating under non-icing conditions. To address this limitation, we developed a smart superhydrophobic polydimethylsiloxane (PDMS) surface embedded with thermochromic capsules (TC) (S-PDMS/TC) featuring reversible thermochromic capability via a facile combination of spin-coating and femtosecond laser ablation. The resulting hierarchical micro-grid structure acts as a sacrificial layer, shielding fragile nanostructures against mechanical abrasion, while endowing the surface with robust superhydrophobicity (contact angle > 155°). Uniquely, S-PDMS/TC exhibits an adaptive color transition from pale yellow to deep black when the temperature drops below 5 °C. This response enables on-demand photothermal enhancement, significantly boosting solar absorption in freezing environments while minimizing heat absorption at room temperature. Consequently, S-PDMS/TC demonstrates superior anti-icing performance, extending the freezing time to 310 s and reducing ice adhesion strength to 40.4 kPa. Notably, during photothermal de-icing, the meltwater exhibits spontaneous dewetting behavior driven by the replenishment of the air cushion, effectively preventing secondary icing. This work presents a mechanically durable and intelligent strategy for ice protection, successfully balancing efficient de-icing with thermal management.
Open AccessSmart Superhydrophobic Surfaces with Reversible Thermochromism for On-Demand Photothermal Anti-Icing
Photothermal superhydrophobic surfaces represent a promising solution for passive anti-icing; however, the persistent high solar absorption of static black coatings often leads to undesirable overheating under non-icing conditions. To address this limitation, we developed a smart superhydrophobic polydimethylsiloxane (PDMS) surface embedded with thermochromic capsules (TC) (S-PDMS/TC) featuring reversible thermochromic capability via a facile combination of spin-coating and femtosecond laser ablation. The resulting hierarchical micro-grid structure acts as a sacrificial layer, shielding fragile nanostructures against mechanical abrasion, while endowing the surface with robust superhydrophobicity (contact angle > 155°). Uniquely, S-PDMS/TC exhibits an adaptive color transition from pale yellow to deep black when the temperature drops below 5 °C. This response enables on-demand photothermal enhancement, significantly boosting solar absorption in freezing environments while minimizing heat absorption at room temperature. Consequently, S-PDMS/TC demonstrates superior anti-icing performance, extending the freezing time to 310 s and reducing ice adhesion strength to 40.4 kPa. Notably, during photothermal de-icing, the meltwater exhibits spontaneous dewetting behavior driven by the replenishment of the air cushion, effectively preventing secondary icing. This work presents a mechanically durable and intelligent strategy for ice protection, successfully balancing efficient de-icing with thermal management.
- 11 June 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (47)
Multi‐Scale Biomimetic Strategy: Robust Woven Wires with Photo‐Thermal De‐Icing and Spontaneous De‐Wetting
The irreversible transition from the Wenzel to the Cassie–Baxter state of superhydrophobic surfaces under negative temperatures and high humidity significantly degrades their anti‐icing performance. Moreover, large‐scale preparation of superhydrophobic surfaces with high mechanical durability remains challenging. In this study, inspired by the photothermal properties of coral and the reinforcement structures of mountain slopes, an anti‐icing mesh (AIM) with submillimeter overlapping peaks/ridges and coral‐shaped micro‐/nanostructures assembled onto woven wires is fabricated using one‐step laser micromachining. The resulting AIM exhibited an ice adhesion strength of 14.5 kPa and solar‐assisted de‐icing times of 123 s (0.1 Wcm −2 ) and 302 s (0.05 Wcm −2 ) in frozen‐rain environment. These properties are attributed to its hollow micro‐skeleton and subwavelength porous nano‐gaps formed by melted polydimethylsiloxane and dispersed carbon black nanoparticles. The AIM maintained a water rolling angle of 8° even after 10,000 abrasion cycles, as tested using the standardized ASTM D4060 method. The robustness mechanism is further analyzed through a quantitative assessment of micromorphology evolution and interface wetting states. Additionally, transmission cables encapsulated with intact or damaged AIM are tested to simulate real‐world de‐icing applications, demonstrating its strong anti‐icing potential as a scalable fabrication method with effective freezing delay, photothermal de‐icing capability, and exceptional durability.
- 11 June 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (47)
Multi‐Scale Biomimetic Strategy: Robust Woven Wires with Photo‐Thermal De‐Icing and Spontaneous De‐Wetting
The irreversible transition from the Wenzel to the Cassie–Baxter state of superhydrophobic surfaces under negative temperatures and high humidity significantly degrades their anti‐icing performance. Moreover, large‐scale preparation of superhydrophobic surfaces with high mechanical durability remains challenging. In this study, inspired by the photothermal properties of coral and the reinforcement structures of mountain slopes, an anti‐icing mesh (AIM) with submillimeter overlapping peaks/ridges and coral‐shaped micro‐/nanostructures assembled onto woven wires is fabricated using one‐step laser micromachining. The resulting AIM exhibited an ice adhesion strength of 14.5 kPa and solar‐assisted de‐icing times of 123 s (0.1 Wcm −2 ) and 302 s (0.05 Wcm −2 ) in frozen‐rain environment. These properties are attributed to its hollow micro‐skeleton and subwavelength porous nano‐gaps formed by melted polydimethylsiloxane and dispersed carbon black nanoparticles. The AIM maintained a water rolling angle of 8° even after 10,000 abrasion cycles, as tested using the standardized ASTM D4060 method. The robustness mechanism is further analyzed through a quantitative assessment of micromorphology evolution and interface wetting states. Additionally, transmission cables encapsulated with intact or damaged AIM are tested to simulate real‐world de‐icing applications, demonstrating its strong anti‐icing potential as a scalable fabrication method with effective freezing delay, photothermal de‐icing capability, and exceptional durability.
- Open Access
Super-Hydrophobic Photothermal Copper Foam for Multi-Scenario Solar Desalination: Integrating Anti-Icing, Self-Cleaning, and Mechanical Durability
Solar desalination is widely regarded as an effective way to solve freshwater scarcity. However, the balance between the costs of micro-nanostructures, thermal regulation, and the durability of interface evaporators must all be considered. In this study, a super-hydrophobic copper foam with hierarchical micro-nanostructures exhibited temperatures greater than 66 °C under solar illumination of 1 kW·m−2. Significantly, the modified copper foam acting as a solar interface evaporator had a water harvesting efficiency of 1.76 kg·m−2·h−1, resulting from its good photothermal conversion and porous skeleton. Further, the anti-deicing, self-cleaning, and anti-abrasion tests were carried out to demonstrate its durability. The whole fabrication of the as-prepared CF was only involved in mechanical extrusion and spray-coating, which is suitable for large-scale production. This work endows the interface evaporator with super-hydrophobicity, photo-thermal conversion, anti-icing, and mechanical stability, all of which are highly demanded in multi-scenario solar desalination.
Open AccessSuper-Hydrophobic Photothermal Copper Foam for Multi-Scenario Solar Desalination: Integrating Anti-Icing, Self-Cleaning, and Mechanical Durability
Solar desalination is widely regarded as an effective way to solve freshwater scarcity. However, the balance between the costs of micro-nanostructures, thermal regulation, and the durability of interface evaporators must all be considered. In this study, a super-hydrophobic copper foam with hierarchical micro-nanostructures exhibited temperatures greater than 66 °C under solar illumination of 1 kW·m−2. Significantly, the modified copper foam acting as a solar interface evaporator had a water harvesting efficiency of 1.76 kg·m−2·h−1, resulting from its good photothermal conversion and porous skeleton. Further, the anti-deicing, self-cleaning, and anti-abrasion tests were carried out to demonstrate its durability. The whole fabrication of the as-prepared CF was only involved in mechanical extrusion and spray-coating, which is suitable for large-scale production. This work endows the interface evaporator with super-hydrophobicity, photo-thermal conversion, anti-icing, and mechanical stability, all of which are highly demanded in multi-scenario solar desalination.
- Open Access
Water-Borne Photo-Thermal Superhydrophobic Coating for Anti-Icing, Self-Cleaning and Oil–Water Separation
Superhydrophobic coatings with photo-thermal effects have advantages in anti-/de-icing and self-cleaning. Here, an eco-friendly and low-cost fabrication of superhydrophobic coating was proposed by spraying a water-borne suspension including carbon black and paraffin wax onto substrate-independent surfaces. The a water-borne suspension coated on stain steel plate showed a strong water-repellence, delaying the ice freezing time to 665 s, which is much higher than that of bare stain steel plate (210 s) under the same experimental condition. The ice-melting time was measured as 120 s under a solar irradiation of 0.1 W/cm2, while the control group had no sign of ice-melting during the same time. As a concept of proof, the self-cleaning, anti-corrosion, and oil–water separation were enabled by spraying the water-borne suspension on various substrates, demonstrating its diverse performances. Hence, the water-borne superhydrophibic coating provides an efficient, safe, and sustainable solution for wettability-related applications.
Open AccessWater-Borne Photo-Thermal Superhydrophobic Coating for Anti-Icing, Self-Cleaning and Oil–Water Separation
Superhydrophobic coatings with photo-thermal effects have advantages in anti-/de-icing and self-cleaning. Here, an eco-friendly and low-cost fabrication of superhydrophobic coating was proposed by spraying a water-borne suspension including carbon black and paraffin wax onto substrate-independent surfaces. The a water-borne suspension coated on stain steel plate showed a strong water-repellence, delaying the ice freezing time to 665 s, which is much higher than that of bare stain steel plate (210 s) under the same experimental condition. The ice-melting time was measured as 120 s under a solar irradiation of 0.1 W/cm2, while the control group had no sign of ice-melting during the same time. As a concept of proof, the self-cleaning, anti-corrosion, and oil–water separation were enabled by spraying the water-borne suspension on various substrates, demonstrating its diverse performances. Hence, the water-borne superhydrophibic coating provides an efficient, safe, and sustainable solution for wettability-related applications.
- 17 February 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 484
pH-Responsive Janus membrane with liquid gating property for crop protection and demulsification
- 17 February 2024
- Published by Elsevier in Chemical Engineering Journal
- Vol. 484
pH-Responsive Janus membrane with liquid gating property for crop protection and demulsification
- Open Access
- 1 September 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (9)
Dynamic contact angle measurement of hydrophilic open microchannels: The role of surface wettability
Wetting dynamics play a major role in many practical applications; however, many fundamental problems remain unresolved, especially in relation to the dynamic contact angle. The present study investigates the movement of a gas–liquid interface in an open microchannel with different materials and wettability. Using a high-speed microscope camera, the shape of the dynamic equilibrium of the gas–liquid interface in a flowing state was recorded, including the microscopic regions near the contact line. The results show that the effects of the surface wetting condition play a crucial role in altering the apparent dynamic contact angle. During the experiment, we observed an interesting phenomenon where the dynamic equilibrium contact angle under flow conditions is larger than the contact angle predicted by the Cox–Voinov law. This may be attributed to the existence of friction between the fluid and the wall surface under flow, which reduces the additional pressure at the gas–liquid interface, and the magnitude of friction is manifested through the hysteresis contact angle. The instability and periodic variation of the microscopic contact angle are caused by the surface heterogeneity near the contact line, namely, the spatial variation of solid–gas and solid–liquid interfacial tensions. Understanding the surface properties can help optimize the interface system's design and improve its efficiency for use.
- 1 September 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (9)
Open AccessDynamic contact angle measurement of hydrophilic open microchannels: The role of surface wettability
Wetting dynamics play a major role in many practical applications; however, many fundamental problems remain unresolved, especially in relation to the dynamic contact angle. The present study investigates the movement of a gas–liquid interface in an open microchannel with different materials and wettability. Using a high-speed microscope camera, the shape of the dynamic equilibrium of the gas–liquid interface in a flowing state was recorded, including the microscopic regions near the contact line. The results show that the effects of the surface wetting condition play a crucial role in altering the apparent dynamic contact angle. During the experiment, we observed an interesting phenomenon where the dynamic equilibrium contact angle under flow conditions is larger than the contact angle predicted by the Cox–Voinov law. This may be attributed to the existence of friction between the fluid and the wall surface under flow, which reduces the additional pressure at the gas–liquid interface, and the magnitude of friction is manifested through the hysteresis contact angle. The instability and periodic variation of the microscopic contact angle are caused by the surface heterogeneity near the contact line, namely, the spatial variation of solid–gas and solid–liquid interfacial tensions. Understanding the surface properties can help optimize the interface system's design and improve its efficiency for use.