Qin Zeng
Research Subjects
Qin Zeng has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Shangtuo Qian
Hohai University
3 shared publications - David Z. Zhu
Department of Civil and Environmental Engineering, University of Alberta, Edmonton, Canada
2 shared publications - Hui Xu
College of Water Conservancy and Hydropower Engineering, Hohai University, Nanjing 210098, China
2 shared publications - Kan Kan
School of Electrical and Power Engineering, Hohai University, Nanjing 211100, China
2 shared publications Feng Yan
1 shared publication- Han Ye1 shared publication
Latest Publications
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
Water drop impact on oil layer floating on water pool
The occurrence of oil slicks on water surfaces is common in various aquatic environments. Raindrops impact can potentially contribute to the transport of oil slicks to the atmosphere and deep water, leading to more widespread and persistent contamination. This experimental study investigates the impact of a water drop on an oil layer floating on a water pool, aiming to reveal the mesoscale mechanisms and characteristics of oil transport. The experiment identifies secondary droplets and oil-encapsulated water (O-E-W) particles, which elucidate how oil slicks are transported into atmosphere and deep water. A regime map with thresholds is established to predict if and how oil slicks would be transported. The formation mechanisms and morphological variations of O-E-W particles are clarified, showing that their number is proportional to the maximum crater depth. The amount of oil volume carried by O-E-W particles generally increases with the impact Weber number, reaching up to two times the impact drop volume. Secondary droplets are generated via central jet or crown splash. A crown splash can generate nearly 600 secondary droplets, with diameters smaller than 0.24 times the impact drop and velocities exceeding two times the impact velocity. Large-sized drops impacting thin and low-viscosity oil layers at high speeds promote the generation of greater numbers of high-velocity and small-sized secondary droplets and more numerous and diverse O-E-W particles, indicating increasing oil transport capacity and environmental risks. These results enhance the understanding of the physical dynamics of drop impact, contributing to the assessment of oil slicks pollution caused by rainfall.
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
Water drop impact on oil layer floating on water pool
The occurrence of oil slicks on water surfaces is common in various aquatic environments. Raindrops impact can potentially contribute to the transport of oil slicks to the atmosphere and deep water, leading to more widespread and persistent contamination. This experimental study investigates the impact of a water drop on an oil layer floating on a water pool, aiming to reveal the mesoscale mechanisms and characteristics of oil transport. The experiment identifies secondary droplets and oil-encapsulated water (O-E-W) particles, which elucidate how oil slicks are transported into atmosphere and deep water. A regime map with thresholds is established to predict if and how oil slicks would be transported. The formation mechanisms and morphological variations of O-E-W particles are clarified, showing that their number is proportional to the maximum crater depth. The amount of oil volume carried by O-E-W particles generally increases with the impact Weber number, reaching up to two times the impact drop volume. Secondary droplets are generated via central jet or crown splash. A crown splash can generate nearly 600 secondary droplets, with diameters smaller than 0.24 times the impact drop and velocities exceeding two times the impact velocity. Large-sized drops impacting thin and low-viscosity oil layers at high speeds promote the generation of greater numbers of high-velocity and small-sized secondary droplets and more numerous and diverse O-E-W particles, indicating increasing oil transport capacity and environmental risks. These results enhance the understanding of the physical dynamics of drop impact, contributing to the assessment of oil slicks pollution caused by rainfall.
- 1 September 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (9)
A catastrophe phenomenon produced by impact of drop trains
The impact of drop trains is widespread in industrial and agricultural applications, as well as in nature, making it crucial to investigate. In this study, the impact of drop trains on solid surfaces is experimentally investigated using a high-speed camera. A catastrophe phenomenon that had previously been overlooked is discovered: with the successive impact of drop trains, the impact result undergoes a discontinuous catastrophe, from a thin film impact generating the crown splash to a thick film impact generating the Worthington jet. The thickness of the thin film is less than 0.23 times the impact drop's diameter, while the thickness of the thick film ranges from 0.52 to 1.05 times the impact drop's diameter. The reason for the catastrophe is revealed from a phenomenological perspective. The number of impact drops and the impact Weber number are important factors determining the occurrence of catastrophe, and the critical number of impact drops for the catastrophe is linearly and positively correlated with the impact Weber number. Based on the cusp catastrophe theory, a catastrophe threshold model for drop train impact is established. This model is able to predict the threshold for the occurrence of catastrophe and provide a method for identifying the thin film stage, the thick film stage, and the transient catastrophe stage between these two stages. The catastrophe threshold model achieves the identification accuracy of 83.48%, 91.72%, and 77.50% for the total measured data, the thin film stage, and the thick film stage, respectively, indicating its good performance.
- 1 September 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (9)
A catastrophe phenomenon produced by impact of drop trains
The impact of drop trains is widespread in industrial and agricultural applications, as well as in nature, making it crucial to investigate. In this study, the impact of drop trains on solid surfaces is experimentally investigated using a high-speed camera. A catastrophe phenomenon that had previously been overlooked is discovered: with the successive impact of drop trains, the impact result undergoes a discontinuous catastrophe, from a thin film impact generating the crown splash to a thick film impact generating the Worthington jet. The thickness of the thin film is less than 0.23 times the impact drop's diameter, while the thickness of the thick film ranges from 0.52 to 1.05 times the impact drop's diameter. The reason for the catastrophe is revealed from a phenomenological perspective. The number of impact drops and the impact Weber number are important factors determining the occurrence of catastrophe, and the critical number of impact drops for the catastrophe is linearly and positively correlated with the impact Weber number. Based on the cusp catastrophe theory, a catastrophe threshold model for drop train impact is established. This model is able to predict the threshold for the occurrence of catastrophe and provide a method for identifying the thin film stage, the thick film stage, and the transient catastrophe stage between these two stages. The catastrophe threshold model achieves the identification accuracy of 83.48%, 91.72%, and 77.50% for the total measured data, the thin film stage, and the thick film stage, respectively, indicating its good performance.
- Open Access
- 1 September 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (9)
Machine learning-based splash prediction model for drops impact on dry solid surfaces
The impact of drops on dry solid surfaces has important applications in engineering. The post-impact behavior of drops can be classified into non-splash and splash, and there is a lack of splash prediction models that well consider the independent and coupled effects of liquid properties, drop impact characteristics, and surface properties. In this study, machine learning methods of Random Forest (RF) and Support Vector Machine (SVM) are applied to build splash prediction models and analyze the effects of different features. The RF model achieves good prediction accuracy and identifies the roughness R*, Weber number We, Reynolds number Re, and contact angle θeq as the most influential parameters, with decreasing importance. The interpretability analysis shows the increasing splashing tendency with increasing We, Re, and R* and decreasing cos θeq, and a special case of non-splash by drops impact on hydrophobic surfaces with cos θeq ≈ −0.45 is found, which can be explained by the coupled effects of drop and surface features. The classical splash prediction model, K-parameter model, is improved by SVM in an explicit form and considering the effects of liquid properties, drop impact characteristics, and surface properties. The improved K-parameter model has good performance for surfaces with various roughness and wettability, and its prediction accuracy reaches 86.49%, which is significantly higher than 67.57% of the K-parameter model, 46.49% of the Riboux and Gordillo model, and 66.10% of the Zhang model. This study is expected to provide valuable insight into the control of non-splash or splash of drops according to different requirements during applications.
- 1 September 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (9)
Open AccessMachine learning-based splash prediction model for drops impact on dry solid surfaces
The impact of drops on dry solid surfaces has important applications in engineering. The post-impact behavior of drops can be classified into non-splash and splash, and there is a lack of splash prediction models that well consider the independent and coupled effects of liquid properties, drop impact characteristics, and surface properties. In this study, machine learning methods of Random Forest (RF) and Support Vector Machine (SVM) are applied to build splash prediction models and analyze the effects of different features. The RF model achieves good prediction accuracy and identifies the roughness R*, Weber number We, Reynolds number Re, and contact angle θeq as the most influential parameters, with decreasing importance. The interpretability analysis shows the increasing splashing tendency with increasing We, Re, and R* and decreasing cos θeq, and a special case of non-splash by drops impact on hydrophobic surfaces with cos θeq ≈ −0.45 is found, which can be explained by the coupled effects of drop and surface features. The classical splash prediction model, K-parameter model, is improved by SVM in an explicit form and considering the effects of liquid properties, drop impact characteristics, and surface properties. The improved K-parameter model has good performance for surfaces with various roughness and wettability, and its prediction accuracy reaches 86.49%, which is significantly higher than 67.57% of the K-parameter model, 46.49% of the Riboux and Gordillo model, and 66.10% of the Zhang model. This study is expected to provide valuable insight into the control of non-splash or splash of drops according to different requirements during applications.