Mustafa Emre Erbil
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mustafa Emre Erbil has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Demet Sariyer
Manisa Celal Bayar Üniversitesi Turgutlu Meslek Yüksekokulu
4 shared publications - Hilmi Cenk Bayrakçı
Isparta Uygulamali Bilimler Universitesi
4 shared publications - Merdan Özkahraman
Isparta University of Applied Sciences
4 shared publications - Ahmet Ali Süzen
Isparta Uygulamalı Bilimler Üniversitesi
1 shared publication Hilmi Cenk Bayrakçı
Isparta Uygulamali Bilimler Universitesi
1 shared publicationГільмі Дженк Байракджи
Isparta University of Applied Sciences
1 shared publication
Latest Publications
- Open Access
- 16 September 2026
- Published by Elsevier in SSRN Electronic Journal
Hybrid MC-ML Modeling of Neutron Spectra and Multidirectional Dose Distributions in Multilayer Fe-Concrete Shielding for a 50 MeV Proton Accelerator
In this study, the multidirectional behavior of secondary neutron fields generated by the interaction of 50 MeV protons with a copper target was comprehensively investigated in a multilayer Fe-concrete shielding geometry using a hybrid framework combining Monte Carlo (MC) simulations and machine learning (ML). The proton accelerator tunnel was modeled as a three-dimensional structure consisting of symmetric 2 m Fe + 4 m concrete side shields, a concrete roof, a concrete floor, and the surrounding soil environment. FLUKA MC simulations were performed to analyze secondary particle production, neutron energy spectra, and spatial ambient dose equivalent H*(10) distributions. Neutron energy spectra were evaluated using the USRTRACK scoring estimator, providing insight into the energy-dependent transport, moderation, and attenuation mechanisms within the multilayer shielding system. The results demonstrated that the iron layer effectively suppresses the fast-neutron component through inelastic scattering, whereas the surrounding concrete layers provide efficient neutron moderation and absorption, producing a progressive spectral softening together with significant reductions in H*(10). Using the FLUKA-generated H*(10) datasets, in which the one-dimensional spatial position along each axis (x or y) was used as the single input feature and the corresponding H*(10) value as the output target, Linear Regression (LR), Random Forest (RF), XGBoost, Support Vector Regression (SVR), and LightGBM models were developed and compared. Following log(1+y) transformation, min-max normalization, an 80%/20% train-test split, 5-fold cross-validation, and GridSearchCV-based hyperparameter optimization, the Random Forest model achieved the highest predictive accuracy (X-axis test R² = 0.9994; Y-axis test R² = 0.9991), while XGBoost and LightGBM exhibited comparable performance. Computational efficiency analysis showed that high-statistics FLUKA simulations require several hours on the TRUBA/TR-Grid HPC infrastructure, whereas the trained ML models generate predictions within milliseconds, corresponding to computational speedups of approximately 10⁶–10⁹ during the prediction stage. The combined analyses of neutron spectra, multidirectional dose distributions, and surrogate modeling demonstrate that the proposed hybrid MC-ML framework provides both a physically interpretable and computationally efficient methodology for rapid radiation shielding optimization and accelerator shielding design.
- 16 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessHybrid MC-ML Modeling of Neutron Spectra and Multidirectional Dose Distributions in Multilayer Fe-Concrete Shielding for a 50 MeV Proton Accelerator
In this study, the multidirectional behavior of secondary neutron fields generated by the interaction of 50 MeV protons with a copper target was comprehensively investigated in a multilayer Fe-concrete shielding geometry using a hybrid framework combining Monte Carlo (MC) simulations and machine learning (ML). The proton accelerator tunnel was modeled as a three-dimensional structure consisting of symmetric 2 m Fe + 4 m concrete side shields, a concrete roof, a concrete floor, and the surrounding soil environment. FLUKA MC simulations were performed to analyze secondary particle production, neutron energy spectra, and spatial ambient dose equivalent H*(10) distributions. Neutron energy spectra were evaluated using the USRTRACK scoring estimator, providing insight into the energy-dependent transport, moderation, and attenuation mechanisms within the multilayer shielding system. The results demonstrated that the iron layer effectively suppresses the fast-neutron component through inelastic scattering, whereas the surrounding concrete layers provide efficient neutron moderation and absorption, producing a progressive spectral softening together with significant reductions in H*(10). Using the FLUKA-generated H*(10) datasets, in which the one-dimensional spatial position along each axis (x or y) was used as the single input feature and the corresponding H*(10) value as the output target, Linear Regression (LR), Random Forest (RF), XGBoost, Support Vector Regression (SVR), and LightGBM models were developed and compared. Following log(1+y) transformation, min-max normalization, an 80%/20% train-test split, 5-fold cross-validation, and GridSearchCV-based hyperparameter optimization, the Random Forest model achieved the highest predictive accuracy (X-axis test R² = 0.9994; Y-axis test R² = 0.9991), while XGBoost and LightGBM exhibited comparable performance. Computational efficiency analysis showed that high-statistics FLUKA simulations require several hours on the TRUBA/TR-Grid HPC infrastructure, whereas the trained ML models generate predictions within milliseconds, corresponding to computational speedups of approximately 10⁶–10⁹ during the prediction stage. The combined analyses of neutron spectra, multidirectional dose distributions, and surrogate modeling demonstrate that the proposed hybrid MC-ML framework provides both a physically interpretable and computationally efficient methodology for rapid radiation shielding optimization and accelerator shielding design.
- Open Access
- 31 August 2026
- Published by International Journal of 3D Printing Technologies and Digital Industry in International Journal of 3D Printing Technologies and Digital Industry
- Vol. 10 (2) , 402-424
MULTIDIRECTIONAL NEUTRON TRANSPORT AND DOSE COMPLIANCE IN MULTILAYER IRON-CONCRETE SHIELDING FOR A 50 MEV PROTON ACCELERATOR: A MONTE CARLO-MACHINE LEARNING APPROACH
In this study, the multidirectional transport and dose compliance of secondary neutron fields generated by the interaction of 50 MeV protons with a copper target were investigated within a multilayer iron-concrete hybrid shielding system using a hybrid Monte Carlo (MC)-Machine Learning (ML) approach. High-accuracy FLUKA MC simulations were employed to compute the ambient dose equivalent H*(10) distributions along both horizontal (±x) and vertical (±y) directions in a realistic tunnel-type accelerator geometry. Based on the resulting dose-distance dataset, Linear Regression (LR), Random Forest (RF), and Gradient Boosting Regressor (GBR) models were developed. During the data preprocessing stage, log(1+y) transformation and min-max normalization were applied. Model performances were evaluated using an 80% training – 20% testing split, 5-fold cross-validation, and GridSearch-based hyperparameter optimization. The results demonstrate that tree-based ensemble models can accurately capture nonlinear dose distributions spanning a wide dynamic range (RF: R² = 0.9999 / 0.9992; GBR: R² = 0.9997 / 0.9988), whereas the performance of the LR model remains limited. From a radiation protection perspective, the analysis indicates that dose levels along the horizontal direction and particularly in the upward (+y) region exceed international regulatory limits. In contrast, a significant attenuation is observed in the downward direction due to the combined moderating and absorbing effects of the concrete floor and surrounding soil. In conclusion, the proposed MC-ML framework provides a reliable and scalable methodology for the rapid analysis and optimization of multilayer shielding systems by significantly reducing the computational cost associated with conventional MC-based dose predictions.
- 31 August 2026
- Published by International Journal of 3D Printing Technologies and Digital Industry in International Journal of 3D Printing Technologies and Digital Industry
- Vol. 10 (2) , 402-424
Open AccessMULTIDIRECTIONAL NEUTRON TRANSPORT AND DOSE COMPLIANCE IN MULTILAYER IRON-CONCRETE SHIELDING FOR A 50 MEV PROTON ACCELERATOR: A MONTE CARLO-MACHINE LEARNING APPROACH
In this study, the multidirectional transport and dose compliance of secondary neutron fields generated by the interaction of 50 MeV protons with a copper target were investigated within a multilayer iron-concrete hybrid shielding system using a hybrid Monte Carlo (MC)-Machine Learning (ML) approach. High-accuracy FLUKA MC simulations were employed to compute the ambient dose equivalent H*(10) distributions along both horizontal (±x) and vertical (±y) directions in a realistic tunnel-type accelerator geometry. Based on the resulting dose-distance dataset, Linear Regression (LR), Random Forest (RF), and Gradient Boosting Regressor (GBR) models were developed. During the data preprocessing stage, log(1+y) transformation and min-max normalization were applied. Model performances were evaluated using an 80% training – 20% testing split, 5-fold cross-validation, and GridSearch-based hyperparameter optimization. The results demonstrate that tree-based ensemble models can accurately capture nonlinear dose distributions spanning a wide dynamic range (RF: R² = 0.9999 / 0.9992; GBR: R² = 0.9997 / 0.9988), whereas the performance of the LR model remains limited. From a radiation protection perspective, the analysis indicates that dose levels along the horizontal direction and particularly in the upward (+y) region exceed international regulatory limits. In contrast, a significant attenuation is observed in the downward direction due to the combined moderating and absorbing effects of the concrete floor and surrounding soil. In conclusion, the proposed MC-ML framework provides a reliable and scalable methodology for the rapid analysis and optimization of multilayer shielding systems by significantly reducing the computational cost associated with conventional MC-based dose predictions.
- Open Access
- 20 May 2026
- Published by Elsevier in SSRN Electronic Journal
Millisecond-Level Surrogate Prediction of Neutron Dose Distributions in Multilayer Fe-Concrete Shielding Using Hybrid MC-ML Modeling
In this study, the spatial ambient dose equivalent H*(10) distributions of secondary neutron fields produced by the interaction of 50 MeV protons with a copper target were investigated in a multilayer iron-concrete shielding geometry, using a hybrid approach combining Monte Carlo (MC) and machine learning (ML) methods. In the simulations performed with the FLUKA MC code, the proton accelerator tunnel was modeled as a three-dimensional structure including symmetric 2 m Fe + 1 m concrete side shields, a concrete roof, a concrete floor, and the surrounding soil environment. Using the H*(10) datasets obtained from the FLUKA simulations, Linear Regression, Random Forest, XGBoost, Support Vector Regression, and LightGBM models were developed and compared. In the data preprocessing stage, log(1+y) transformation and min-max normalization were applied; the models were trained under an 80%/20% train-test split with 5-fold cross-validation and GridSearchCV-based hyperparameter optimization. The results showed that the Random Forest model provided the highest predictive performance along both axes (X-axis test R2 = 0.9994; Y-axis test R2 = 0.9991). XGBoost and LightGBM models also exhibited high accuracy. The computational efficiency analysis revealed that high-statistics FLUKA simulations require run times on the order of hours on the TRUBA/TR-Grid HPC infrastructure, whereas the trained ML models can be trained within seconds and produce predictions at the millisecond level. A computational speed-up of approximately 106-109 was achieved with ML-based predictions compared to MC simulations. The results demonstrate that the proposed hybrid MC-ML approach provides an effective computational framework for rapid parametric screening and radiation shielding optimization.
- 20 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessMillisecond-Level Surrogate Prediction of Neutron Dose Distributions in Multilayer Fe-Concrete Shielding Using Hybrid MC-ML Modeling
In this study, the spatial ambient dose equivalent H*(10) distributions of secondary neutron fields produced by the interaction of 50 MeV protons with a copper target were investigated in a multilayer iron-concrete shielding geometry, using a hybrid approach combining Monte Carlo (MC) and machine learning (ML) methods. In the simulations performed with the FLUKA MC code, the proton accelerator tunnel was modeled as a three-dimensional structure including symmetric 2 m Fe + 1 m concrete side shields, a concrete roof, a concrete floor, and the surrounding soil environment. Using the H*(10) datasets obtained from the FLUKA simulations, Linear Regression, Random Forest, XGBoost, Support Vector Regression, and LightGBM models were developed and compared. In the data preprocessing stage, log(1+y) transformation and min-max normalization were applied; the models were trained under an 80%/20% train-test split with 5-fold cross-validation and GridSearchCV-based hyperparameter optimization. The results showed that the Random Forest model provided the highest predictive performance along both axes (X-axis test R2 = 0.9994; Y-axis test R2 = 0.9991). XGBoost and LightGBM models also exhibited high accuracy. The computational efficiency analysis revealed that high-statistics FLUKA simulations require run times on the order of hours on the TRUBA/TR-Grid HPC infrastructure, whereas the trained ML models can be trained within seconds and produce predictions at the millisecond level. A computational speed-up of approximately 106-109 was achieved with ML-based predictions compared to MC simulations. The results demonstrate that the proposed hybrid MC-ML approach provides an effective computational framework for rapid parametric screening and radiation shielding optimization.
- Open Access
- 6 May 2026
- Published by Elsevier in SSRN Electronic Journal
Uncertainty-Aware Hybrid Monte Carlo–Machine Learning Surrogate Modeling of Neutron Dose Attenuation in Ferroboron–Concrete Multilayer Shielding
This study investigates the spatial distribution of secondary neutron-induced dose fields generated by 250 MeV proton–copper interactions within a multilayer ferroboron (FeB)-concrete shielding configuration using a hybrid Monte Carlo (MC) and machine learning (ML) framework. High-fidelity simulations were performed using the FLUKA code to obtain three-dimensional ambient dose equivalent H*(10) [µSv·h−1] distributions in a realistic accelerator tunnel geometry consisting of symmetric FeB-concrete lateral shielding, a concrete floor and roof, and surrounding soil.Based on the MC-generated dataset, four regression models—Gaussian Process Regression (GPR), Multilayer Perceptron (MLP), Kernel Ridge Regression (KRR), and CatBoost (CBR)—were trained and systematically evaluated. Data preprocessing included log(1+y) transformation and min–max normalization, while model development employed an 80/20 train–test split, 5-fold cross-validation, and GridSearchCV-based hyperparameter optimization. The results indicate that the GPR model with a Matérn-1.5 kernel achieved the highest prediction accuracy along both spatial axes (CV R2 = 0.9989 for x-axis and 0.9995 for y-axis), while CatBoost also demonstrated strong performance (CV R2 = 0.9991 along the y-axis). Furthermore, epistemic uncertainty estimates obtained from the GPR model were compared with statistical uncertainties from FLUKA simulations, revealing a statistically significant correlation (Pearson r = 0.541 for x-axis and r = 0.701 for y-axis, p < 10−40). This finding demonstrates that ML-based uncertainty quantification is physically consistent with the stochastic nature of MC simulations.The proposed hybrid MC–ML framework significantly reduces computational cost from hours to milliseconds while preserving high accuracy, enabling rapid and reliable evaluation of dose attenuation in multilayer shielding systems.
- 6 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessUncertainty-Aware Hybrid Monte Carlo–Machine Learning Surrogate Modeling of Neutron Dose Attenuation in Ferroboron–Concrete Multilayer Shielding
This study investigates the spatial distribution of secondary neutron-induced dose fields generated by 250 MeV proton–copper interactions within a multilayer ferroboron (FeB)-concrete shielding configuration using a hybrid Monte Carlo (MC) and machine learning (ML) framework. High-fidelity simulations were performed using the FLUKA code to obtain three-dimensional ambient dose equivalent H*(10) [µSv·h−1] distributions in a realistic accelerator tunnel geometry consisting of symmetric FeB-concrete lateral shielding, a concrete floor and roof, and surrounding soil.Based on the MC-generated dataset, four regression models—Gaussian Process Regression (GPR), Multilayer Perceptron (MLP), Kernel Ridge Regression (KRR), and CatBoost (CBR)—were trained and systematically evaluated. Data preprocessing included log(1+y) transformation and min–max normalization, while model development employed an 80/20 train–test split, 5-fold cross-validation, and GridSearchCV-based hyperparameter optimization. The results indicate that the GPR model with a Matérn-1.5 kernel achieved the highest prediction accuracy along both spatial axes (CV R2 = 0.9989 for x-axis and 0.9995 for y-axis), while CatBoost also demonstrated strong performance (CV R2 = 0.9991 along the y-axis). Furthermore, epistemic uncertainty estimates obtained from the GPR model were compared with statistical uncertainties from FLUKA simulations, revealing a statistically significant correlation (Pearson r = 0.541 for x-axis and r = 0.701 for y-axis, p < 10−40). This finding demonstrates that ML-based uncertainty quantification is physically consistent with the stochastic nature of MC simulations.The proposed hybrid MC–ML framework significantly reduces computational cost from hours to milliseconds while preserving high accuracy, enabling rapid and reliable evaluation of dose attenuation in multilayer shielding systems.
- Open Access
- 10 December 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Terra security
- Vol. 1 (3) , 15-26
A NOVEL HYBRID ENCRYPTION SCHEME BASED ON MODERN CRYPTOGRAPHIC COMPONENTS FOR EMBEDDED SYSTEMS
Topicality. Embedded systems are gaining increasing importance in various domains such as automotive, industrial automation, healthcare technologies, and the Internet of Things (IoT). The main characteristics of these systems include limited memory, moderate processing power, and strict energy efficiency requirements. These constraints make secure data transmission essential, particularly in both wired and wireless communication processes. Potential data leaks or unauthorized access pose major threats to the reliability and safety of embedded systems. The subject of the research is methods and mechanisms of secure data transmission in embedded systems based on the proposed hybrid cryptographic architecture. The main objective of this study is to propose a reliable and security-oriented hybrid cryptographic solution that addresses the need for confidential and integrity-protected data transmission in such devices. Results. In the proposed method, an asymmetric mechanism based on X25519 is employed for secure key exchange. The BLAKE3 function is utilized for key derivation due to its deterministic structure and cryptographic strength, while Ascon-128a is adopted in the symmetric encryption layer for its lightweight yet highly secure AEAD design. This combination integrates the robust key exchange capability of X25519, the collision-resistant and high-entropy key derivation of BLAKE3, and the AEAD (Authenticated Encryption with Associated Data)-based integrity and confidentiality protection of Ascon-128a within a unified framework. The feasibility of the proposed hybrid structure was tested on a Raspberry Pi 5 using the Python programming language. In the experimental setup, the method was validated under different communication scenarios between an embedded sensor and a controller. Conclusion. The findings demonstrate that the developed hybrid architecture provides a highly secure, integrity-preserving, and forward-secrecy-compliant alternative for data protection in embedded systems, offering stronger cryptographic guarantees compared to conventional hybrid encryption schemes in the literature.
- 10 December 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Terra security
- Vol. 1 (3) , 15-26
Open AccessA NOVEL HYBRID ENCRYPTION SCHEME BASED ON MODERN CRYPTOGRAPHIC COMPONENTS FOR EMBEDDED SYSTEMS
Topicality. Embedded systems are gaining increasing importance in various domains such as automotive, industrial automation, healthcare technologies, and the Internet of Things (IoT). The main characteristics of these systems include limited memory, moderate processing power, and strict energy efficiency requirements. These constraints make secure data transmission essential, particularly in both wired and wireless communication processes. Potential data leaks or unauthorized access pose major threats to the reliability and safety of embedded systems. The subject of the research is methods and mechanisms of secure data transmission in embedded systems based on the proposed hybrid cryptographic architecture. The main objective of this study is to propose a reliable and security-oriented hybrid cryptographic solution that addresses the need for confidential and integrity-protected data transmission in such devices. Results. In the proposed method, an asymmetric mechanism based on X25519 is employed for secure key exchange. The BLAKE3 function is utilized for key derivation due to its deterministic structure and cryptographic strength, while Ascon-128a is adopted in the symmetric encryption layer for its lightweight yet highly secure AEAD design. This combination integrates the robust key exchange capability of X25519, the collision-resistant and high-entropy key derivation of BLAKE3, and the AEAD (Authenticated Encryption with Associated Data)-based integrity and confidentiality protection of Ascon-128a within a unified framework. The feasibility of the proposed hybrid structure was tested on a Raspberry Pi 5 using the Python programming language. In the experimental setup, the method was validated under different communication scenarios between an embedded sensor and a controller. Conclusion. The findings demonstrate that the developed hybrid architecture provides a highly secure, integrity-preserving, and forward-secrecy-compliant alternative for data protection in embedded systems, offering stronger cryptographic guarantees compared to conventional hybrid encryption schemes in the literature.
- Open Access
- 27 March 2025
- Published by Firat Universitesi in Fırat Üniversitesi Mühendislik Bilimleri Dergisi
- Vol. 37 (1) , 151-166
Comprehensive Performance Analysis and Evaluation of Various Maze Solving Algorithms for Optimized Autonomous Navigation and Pathfinding
Recent advancements in technology have led to the widespread use of maze-solving algorithms in various applications, such as autonomous robots, GPS-based navigation systems, smart traffic management systems, and healthcare services. This study provides a comprehensive comparative analysis of the performance of several maze-solving algorithms, including A*, Breadth-First Search (BFS), Depth-First Search (DFS), Dijkstra, Flood Fill, Random Mouse, and Recursive Backtracker. The algorithms were evaluated based on key performance metrics such as solution speed, memory usage, and CPU consumption. The results indicate that while the DFS algorithm demonstrates the fastest solution time with minimal memory usage, it has higher CPU consumption. In contrast, the Random Mouse algorithm is the least efficient, showing the highest memory and CPU usage along with the longest solution time. The A* algorithm, although efficient in finding the shortest path, showed moderate performance in both memory and CPU usage. These findings offer valuable insights into the strengths and weaknesses of each algorithm, providing guidance for future improvements and applications in real-world scenarios. This study aims to be a valuable resource for researchers and engineers focused on enhancing the efficiency of maze-solving algorithms in various technological domains
- 27 March 2025
- Published by Firat Universitesi in Fırat Üniversitesi Mühendislik Bilimleri Dergisi
- Vol. 37 (1) , 151-166
Open AccessComprehensive Performance Analysis and Evaluation of Various Maze Solving Algorithms for Optimized Autonomous Navigation and Pathfinding
Recent advancements in technology have led to the widespread use of maze-solving algorithms in various applications, such as autonomous robots, GPS-based navigation systems, smart traffic management systems, and healthcare services. This study provides a comprehensive comparative analysis of the performance of several maze-solving algorithms, including A*, Breadth-First Search (BFS), Depth-First Search (DFS), Dijkstra, Flood Fill, Random Mouse, and Recursive Backtracker. The algorithms were evaluated based on key performance metrics such as solution speed, memory usage, and CPU consumption. The results indicate that while the DFS algorithm demonstrates the fastest solution time with minimal memory usage, it has higher CPU consumption. In contrast, the Random Mouse algorithm is the least efficient, showing the highest memory and CPU usage along with the longest solution time. The A* algorithm, although efficient in finding the shortest path, showed moderate performance in both memory and CPU usage. These findings offer valuable insights into the strengths and weaknesses of each algorithm, providing guidance for future improvements and applications in real-world scenarios. This study aims to be a valuable resource for researchers and engineers focused on enhancing the efficiency of maze-solving algorithms in various technological domains
- Open Access
- 31 August 2024
- Published by Sakarya University Journal of Science in Sakarya University Journal of Science
- Vol. 28 (4) , 756-773
Enhancing Industrial Robot Arms Data Security with a Hybrid Encryption Approach
In the context of the widespread application of robotics technology across numerous industrial sectors, the security of data communication in industrial robot arms emerges as a paramount concern. These robotic arms are instrumental in enhancing productivity and safety in a variety of fields, including but not limited to transportation, agriculture, construction, and mining, by automating tasks and reducing human exposure to hazardous conditions. This paper proposes a novel hybrid encryption strategy to fortify the data security of these industrial robot arms, particularly focusing on preventing data breaches during both wired and wireless communications. The suggested encryption framework combines the strengths of Elliptic Curve Cryptography (ECC) for its efficient asymmetric encryption capabilities, ChaCha20 for its rapid and low-energy symmetric encryption, and Poly1305 for ensuring data integrity through its message authentication code (MAC) algorithm. By leveraging these technologies, the paper outlines the development and application of a secure communication protocol, implemented using Python, that guarantees the confidentiality and integrity of data shared among robot arms and between these arms and their control systems. Additionally, the research conducts a comparative analysis between the ECC-based method and the RSA encryption standard, highlighting the efficiency and effectiveness of the proposed hybrid approach through various tests on different data types and sizes. The findings illustrate a marked improvement in safeguarding against potential data leaks, thereby significantly contributing to the enhancement of industrial robot arms' data security. This study not only addresses the pressing need for robust data protection mechanisms in the face of evolving cyber threats but also sets a benchmark for future research in the field of industrial robotics security.
- 31 August 2024
- Published by Sakarya University Journal of Science in Sakarya University Journal of Science
- Vol. 28 (4) , 756-773
Open AccessEnhancing Industrial Robot Arms Data Security with a Hybrid Encryption Approach
In the context of the widespread application of robotics technology across numerous industrial sectors, the security of data communication in industrial robot arms emerges as a paramount concern. These robotic arms are instrumental in enhancing productivity and safety in a variety of fields, including but not limited to transportation, agriculture, construction, and mining, by automating tasks and reducing human exposure to hazardous conditions. This paper proposes a novel hybrid encryption strategy to fortify the data security of these industrial robot arms, particularly focusing on preventing data breaches during both wired and wireless communications. The suggested encryption framework combines the strengths of Elliptic Curve Cryptography (ECC) for its efficient asymmetric encryption capabilities, ChaCha20 for its rapid and low-energy symmetric encryption, and Poly1305 for ensuring data integrity through its message authentication code (MAC) algorithm. By leveraging these technologies, the paper outlines the development and application of a secure communication protocol, implemented using Python, that guarantees the confidentiality and integrity of data shared among robot arms and between these arms and their control systems. Additionally, the research conducts a comparative analysis between the ECC-based method and the RSA encryption standard, highlighting the efficiency and effectiveness of the proposed hybrid approach through various tests on different data types and sizes. The findings illustrate a marked improvement in safeguarding against potential data leaks, thereby significantly contributing to the enhancement of industrial robot arms' data security. This study not only addresses the pressing need for robust data protection mechanisms in the face of evolving cyber threats but also sets a benchmark for future research in the field of industrial robotics security.
- Open Access
- 8 March 2024
- Published by Wiley
ENSURING DATA SECURITY OF INDUSTRIAL ROBOT ARMS THROUGH HYBRID ENCRYPTION METHOD AND TESTING
Robotics technology is extensively employed in various industries today to enhance operational efficiency. Industrial robot arms, which operate across a wide range of sectors, from personal and commercial transportation to heavy-duty tasks such as agriculture, construction, and mining, play an indispensable role in factory and manufacturing facilities. These robot arms not only contribute to labor savings but also enhance workplace safety by mitigating potentially hazardous situations that could threaten human health. The objective of this study is to ensure the data security of robot arms and prevent potential data leaks during wired or wireless communications. In this context, a hybrid encryption method comprising Elliptic Curve Cryptography (ECC), ChaCha20, and Poly1305 is proposed to securely facilitate communication between industrial robot arms and control systems, as well as communication among industrial robot arms themselves. This method combines the robust asymmetric encryption properties of ECC, the fast and energy-efficient symmetric encryption advantages of ChaCha20, and the data integrity protection benefits of the Poly1305 message authentication code (MAC) algorithm. By implementing this hybrid encryption method using the Python programming language, data communication between robot arms and control systems is securely encrypted, ensuring the confidentiality and integrity of the data. The RSA (Rivest-Shamir-Adleman) asymmetric encryption method, an alternative to ECC, is also included in the ChaCha20-Poly1305-RSA algorithm, allowing a comparison between the proposed ChaCha20-Poly1305-ECC algorithm and a different-sized data set of the same data type. The study investigates and tabulates the difference in performance time between RSA and ECC. Subsequently, the ChaCha20-Poly1305-ECC algorithm is independently tested with various data types and sizes, with the results presented. In conclusion, this study represents a significant step towards enhancing the data security of industrial robot arms, providing effective protection against potential leaks during wireless or wired communications, and elucidating the rationale for employing the proposed encryption method.
- 8 March 2024
- Published by Wiley
Open AccessENSURING DATA SECURITY OF INDUSTRIAL ROBOT ARMS THROUGH HYBRID ENCRYPTION METHOD AND TESTING
Robotics technology is extensively employed in various industries today to enhance operational efficiency. Industrial robot arms, which operate across a wide range of sectors, from personal and commercial transportation to heavy-duty tasks such as agriculture, construction, and mining, play an indispensable role in factory and manufacturing facilities. These robot arms not only contribute to labor savings but also enhance workplace safety by mitigating potentially hazardous situations that could threaten human health. The objective of this study is to ensure the data security of robot arms and prevent potential data leaks during wired or wireless communications. In this context, a hybrid encryption method comprising Elliptic Curve Cryptography (ECC), ChaCha20, and Poly1305 is proposed to securely facilitate communication between industrial robot arms and control systems, as well as communication among industrial robot arms themselves. This method combines the robust asymmetric encryption properties of ECC, the fast and energy-efficient symmetric encryption advantages of ChaCha20, and the data integrity protection benefits of the Poly1305 message authentication code (MAC) algorithm. By implementing this hybrid encryption method using the Python programming language, data communication between robot arms and control systems is securely encrypted, ensuring the confidentiality and integrity of the data. The RSA (Rivest-Shamir-Adleman) asymmetric encryption method, an alternative to ECC, is also included in the ChaCha20-Poly1305-RSA algorithm, allowing a comparison between the proposed ChaCha20-Poly1305-ECC algorithm and a different-sized data set of the same data type. The study investigates and tabulates the difference in performance time between RSA and ECC. Subsequently, the ChaCha20-Poly1305-ECC algorithm is independently tested with various data types and sizes, with the results presented. In conclusion, this study represents a significant step towards enhancing the data security of industrial robot arms, providing effective protection against potential leaks during wireless or wired communications, and elucidating the rationale for employing the proposed encryption method.
- Open Access
- 13 September 2023
- Published by Isparta Uygulamali Bilimler Universitesi in Uluslararası Teknolojik Bilimler Dergisi
- Vol. 15 (2) , 64-72
Otonom mobi̇l robotların güvenli̇ veri̇ i̇leti̇mi̇ içi̇n hi̇bri̇t şi̇freleme yaklaşımı
Günümüzde teknolojik gelişmelerin sürekli ilerlemesiyle birlikte otonom ve yarı otonom araçlar; kişisel ve ticari taşımacılık, tarım, inşaat ve madencilik, araştırma ve keşif gibi birçok alanda süreçleri kolaylaştırmaktadır. Bu araçlar arasında fabrikalarda sıklıkla tercih edilen otonom mobil robotlar (Autonomous Mobile Robots, AMR) bulunmaktadır. AMR'lerin tercih edilmesinin sebepleri arasında birincisi, kullanıldığı alanlarda insan gücünün yetersiz olduğu durumlardır. İkinci olarak, bu robotlar, çalışanların sağlığını tehdit edebilecek riskli durumları ortadan kaldırabilir. Ayrıca, AMR'ler insan gücünden tasarruf sağlama potansiyeli de taşımaktadır. Bu çalışmada, kablosuz haberleşme teknolojileri kullanan AMR'lerin veri güvenliğinin hibrit bir şifreleme yöntemi kullanılarak sağlanması amaçlanmıştır. Asimetrik şifreleme yönteminin güvenlik performansı ve simetrik şifreleme yönteminin hızlı iletişim üstünlükleri, AMR'ler için her iki şifreleme yönteminin birlikte kullanılmasını zorunlu kılmıştır. Hibrit şifreleme yaklaşımında temel olarak asimetrik şifreleme yöntemi Elliptic Curve Cryptography (ECC) ile simetrik şifreleme yöntemi Advanced Encryption Standard (AES) birlikte kullanılmıştır. ECC şifreleme yönteminin temelinde oluşturulan dijital imzalama yöntemi olan ECDSA (Elliptic Curve Digital Signature Algorithm) referans alınarak kullanılmıştır. AES şifreleme yönteminde ise şifrelemenin yanında doğrulama da yapıldığı için GCM (Galois/Counter Mode) tercih edilmiştir. Bu çalışmada birbirleriyle veya kontrolcü sistemle haberleşen ve veri aktarım görevini üstlenen AMR'ler, Python programlama dili aracılığıyla ECDSA-AES/GCM hibrit şifreleme yöntemi kullanılarak şifrelenmiş ve performansı değerlendirilmiştir. Bu sayede kablosuz iletişim sırasında olası bir veri sızıntısı durumunda iletilen verinin, gizliliğinin ve bütünlüğünün korunması incelenecektir. Sonuç olarak önerilen bu yöntem ile kablosuz haberleşme teknolojileri kullanan otonom mobil robotlar için veri güvenliği açısından önemli bir adım sağlaması hedeflenmektedir.
- 13 September 2023
- Published by Isparta Uygulamali Bilimler Universitesi in Uluslararası Teknolojik Bilimler Dergisi
- Vol. 15 (2) , 64-72
Open AccessOtonom mobi̇l robotların güvenli̇ veri̇ i̇leti̇mi̇ içi̇n hi̇bri̇t şi̇freleme yaklaşımı
Günümüzde teknolojik gelişmelerin sürekli ilerlemesiyle birlikte otonom ve yarı otonom araçlar; kişisel ve ticari taşımacılık, tarım, inşaat ve madencilik, araştırma ve keşif gibi birçok alanda süreçleri kolaylaştırmaktadır. Bu araçlar arasında fabrikalarda sıklıkla tercih edilen otonom mobil robotlar (Autonomous Mobile Robots, AMR) bulunmaktadır. AMR'lerin tercih edilmesinin sebepleri arasında birincisi, kullanıldığı alanlarda insan gücünün yetersiz olduğu durumlardır. İkinci olarak, bu robotlar, çalışanların sağlığını tehdit edebilecek riskli durumları ortadan kaldırabilir. Ayrıca, AMR'ler insan gücünden tasarruf sağlama potansiyeli de taşımaktadır. Bu çalışmada, kablosuz haberleşme teknolojileri kullanan AMR'lerin veri güvenliğinin hibrit bir şifreleme yöntemi kullanılarak sağlanması amaçlanmıştır. Asimetrik şifreleme yönteminin güvenlik performansı ve simetrik şifreleme yönteminin hızlı iletişim üstünlükleri, AMR'ler için her iki şifreleme yönteminin birlikte kullanılmasını zorunlu kılmıştır. Hibrit şifreleme yaklaşımında temel olarak asimetrik şifreleme yöntemi Elliptic Curve Cryptography (ECC) ile simetrik şifreleme yöntemi Advanced Encryption Standard (AES) birlikte kullanılmıştır. ECC şifreleme yönteminin temelinde oluşturulan dijital imzalama yöntemi olan ECDSA (Elliptic Curve Digital Signature Algorithm) referans alınarak kullanılmıştır. AES şifreleme yönteminde ise şifrelemenin yanında doğrulama da yapıldığı için GCM (Galois/Counter Mode) tercih edilmiştir. Bu çalışmada birbirleriyle veya kontrolcü sistemle haberleşen ve veri aktarım görevini üstlenen AMR'ler, Python programlama dili aracılığıyla ECDSA-AES/GCM hibrit şifreleme yöntemi kullanılarak şifrelenmiş ve performansı değerlendirilmiştir. Bu sayede kablosuz iletişim sırasında olası bir veri sızıntısı durumunda iletilen verinin, gizliliğinin ve bütünlüğünün korunması incelenecektir. Sonuç olarak önerilen bu yöntem ile kablosuz haberleşme teknolojileri kullanan otonom mobil robotlar için veri güvenliği açısından önemli bir adım sağlaması hedeflenmektedir.