LZLihui Zhao

Lihui Zhao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lihui Zhao has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Interval Uncertainty Analysis on Vibration Characteristics of CLD Plate with Interval Frequency-Dependent Parameters

    by Zhang Dongdong, Zheng Quan, Luan Shenggang, Feng Jie, Zhao Lihui

    For Constrained Layer Damping (CLD) structures, uncertainties in material and geometric parameters significantly undermine the reliability of their optimal configurations in terms of vibration and noise reduction performance. An interval analysis method is developed to investigate the influence of geometric and material parameter uncertainties on the vibration characteristics of CLD structures with interval complex (frequency-dependent) uncertain parameters. A finite element model of CLD structures is established and extended into an interval-based framework considering interval uncertain geometric and material parameters. The interval characterization of vibration characteristics for CLD structures is formulated by first-order Taylor expansion, in which the sensitivity analysis of eigenvalues and modal loss factors with respect to interval parameters is developed, and the Wirtinger operator is employed to formulate the sensitivity analysis of the complex frequency-dependent shear modulus of the viscoelastic core. Finally, numerical examples considering interval analysis for CLD plates are implemented and analyzed, and the proposed method is validated by comparing with Monte Carlo simulations. It shows that the proposed method yields sufficient accuracy to predict the uncertainty of CLD structures when the uncertainty of single/coupled interval parameters is within 10%. Meanwhile, the modal loss factor exhibits strong sensitivity to parameter variations, but the frequency-dependent shear modulus of the viscoelastic core has a relatively limited influence on the vibration characteristics. The method and results will provide useful guidance for the parameter design and optimization of CLD structures.

  • Open Access

    A reliability-oriented method for constructing baseline operating conditions of electric drive systems based on minimum cycle identification

    by Jingfei Fu, Dongdong Zhang, Zhen Wang, Chunhui Gong, Qianbin Liu, Shibo Bing, Shanchao Wang, Li-Hui Zhao

    Electric drive systems in new energy vehicles operate under complex and time-varying conditions that accelerate component degradation and affect system reliability. Constructing representative operating conditions is therefore essential for reliability evaluation. This study proposes a method for constructing baseline operating conditions based on minimum cycle identification and category-based sampling. Multiscale load data are segmented using a variable sliding-window method, and indicators from time, frequency and damage domains are used to determine the minimum representative cycle through a relative recurrence index. Operating-condition segments are then clustered according to damage-rate characteristics and sampled within categories to maintain statistical consistency with the overall dataset. A case study based on operational data from 30 vehicles shows that 90% of users have minimum cycle periods shorter than 11,587 km. The difference in damage-rate means is below 1%, while the joint probability distribution error is lower than 0.001.

  • Open Access

    Nonlinear degradation modeling and remaining useful life prediction for electric drive system with multiple failure modes

    by Zhen Wang, Yadong Li, Shuishi Li, Yandong Hou, Weimin Du, Lihui Zhao

    Accurate modeling of performance degradation and dynamic prediction of remaining useful life (RUL) for electric driving system (EDS) with multiple failure modes are critical for reliability assessment and health management. This study presents an integrated framework that encompasses composite health indicator construction, nonlinear degradation modeling, and RUL prediction. The entropy weight method is used to integrate the damage contributions of different components under various failure modes, resulting in a composite health indicator for the EDS. A nonlinear degradation model construction method for the EDS is presented, with failure thresholds and inherent uncertainties determined through actual bench testing over the full life cycle. The model is further refined by incorporating the acceleration factor between the accelerated and user spectra. Additionally, a Bayesian parameter update method is proposed for RUL prediction and uncertainty quantification, users with varying degradation rates across different service cycles are analyzed. The case study demonstrates that after approximately 20% of the service life, the proposed method achieves prediction errors within 10%. As historical data accumulates, model parameter estimates stabilize, and the predicted RUL probability distribution becomes increasingly concentrated. Comparative experiments against Wiener and CNN-LSTM models further demonstrate the superior robustness and accuracy of the proposed method. This study provides specific references and technical support for the reliability assessment and intelligent operation and maintenance of complex systems.


  • Open Access

    Contact Analysis of EMB Actuator Considering Assembly Errors with Varied Braking Intensities

    by Xinyao Dong, Lihui Zhao, Peng Yao, Yixuan Hu, Liang Quan, Dongdong Zhang

    Differential planetary roller lead screw (DPRS) serves as a quintessential actuating mechanism within the electromechanical braking (EMB) systems of vehicles, where its operational reliability is paramount to ensuring braking safety. Considering different braking intensities, how assembly errors affect the contact stress in DPRS was analyzed via the finite element method. Firstly, the braking force of the EMB system that employed DPRS was verified by the braking performance of legal provisions. Secondly, a rigid body dynamics model of DPRS was established to analyze the response time, braking clamping force, and axial contact force of DPRS under varied braking intensities. Finally, a finite element model of DPRS was constructed. The impact of assembly errors in the lead screw and rollers on the contact stress were investigated within the DPRS mechanism based on this model. The results indicate that as braking intensity increases, the deviation of the lead screw exerts a greater influence on the contact stress generated by the engagement between the lead screw and rollers compared to that between the nut and rollers. The skewness of the rollers also affects the contact stress generated by the engagement of both the lead screw with rollers and the nut with rollers. When assembly errors reach a certain threshold, the equivalent plastic strain is induced to exceed the critical value. This situation significantly impairing the normal operation of DPRS. This study provides guidance for setting the threshold of assembly errors in DPRS mechanisms. It also holds significant implications for the operational reliability of EMB systems.

  • Research on Prediction Method of Vehicle Dynamic Load Under Operating Conditions

    by 赵礼辉,陈沛,王震,张东东,翁硕,朱一光, Chen Pei Zhao Lihui

  • Thermal Management and Optimization of Automotive Film Capacitors Based on Parallel Microchannel Cooling Plates

    by Linhao Huang, Tao Yuan, Yansong Wang, Hui Guo, Zhanghao Li, Lihui Zhao, Bin Chang, Yi Wang

    The automotive film capacitors (AFCs) stand as a widely employed components in electric vehicles. Yet, a notable concern arises with the potential for excessive ripple current, which can prompt self-heating in the AFC and diminish its reliability. Therefore, it becomes crucial to conduct thermal management and effective heat dissipation design for the AFC to ensure its optimal performance. In this study, considering the trend toward integrated and lightweight motor controllers, a parallel microchannel cooling plate (PMCP) is designed at the bottom of the AFC. Through optimization, the thermal performance of the AFC and the overall cooling performance of the PMCP are enhanced. The AFC thermal model is established, and the calculation method for equivalent thermal properties of the film capacitor core is described. A conjugate heat transfer simulation model for the AFC and the PMCP is created by fluent and validated through two experimental tests. In addition, based on an optimal Latin hypercube sample size, the accuracy of five fitting models is compared and the nondominated sorting genetic algorithm II (NSGA-II) for optimization is employed. The results indicate that the error between the simulation method and the two experiments is within 5%. The application of the PMCP effectively redistributes the hottest region of the AFC to the outer housing, reducing the maximum AFC temperature by 10.90 °C. Among the five fitting models, the response surface model (RSM) proved to be the most accurate. The optimized PMCP enhances the overall cooling performance by 10.32% and increases the maximum withstand ripple current of the AFC by 43.83%.


  • Random Load Pattern Recognition of Test Road Based on a Laser Direct Writing Carbon-Based Strain Sensor and a Deep Neural Network

    by Kuan Ju, Shuo Weng, Chun Li, Lihui Zhao, Bo Li, Yue Hu, Yang Gao, Fuzhen Xuan

    The practical application of hydrogen-based fuel cell vehicles (HFCVs) requires the design of advanced stress monitoring system on the hydrogen storage devices, relying on accurate feedback and recognition from the vehicles load conditions. Herein, we proposed an intelligent monitoring method for continuous monitoring of dynamic load parameters and load recognition by combining carbon-based strain sensor, data acquisition and wireless transmission embedded unit, and machine learning (ML). The carbon-based strain sensor, prepared by laser direct writing on polyimide film, exhibited a sensitivity of 6.08 and a frequency response of 1 Hz for effectively measuring the strain status under varying road conditions. A miniaturized and highly integrated data acquisition and wireless transmission unit was adopted to implement edge computing and wireless communication. Wavelet packet decomposition (WPD) and Hilbert-Huang Transform (HHT) were fused to extract intrinsic features in random load spectrum, and the distance-based feature evaluation method was used to evaluate sensitive features to optimize the structure of the deep neural network (DNN). The DNN model could effectively recognize six types of test road conditions, with a test accuracy over 90%. This research effectively advances the design of the loading condition monitoring system of the HFCVs hydrogen storage device.