Mani Mohan Tiwari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mani Mohan Tiwari has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Dilip Kumar Sarkar
Department of Applied Science, Aluminium Research Centre REGAL, University of Quebec at Chicoutimi, Chicoutimi, QC G7H 2B1, Canada
3 shared publications - Xiao Grant Chen
Department of Applied Science, Aluminium Research Centre REGAL, University of Quebec at Chicoutimi, Chicoutimi, QC G7H 2B1, Canada
2 shared publications Dilip Kumar Sarkar
Department of Applied Science, Aluminium Research Centre REGAL, University of Quebec at Chicoutimi
1 shared publicationS. Noormohammed
Department of Applied Science University of Québec at Chicoutimi Aluminum Research Center REGAL, Chicoutimi Québec G7H 2B1 Canada
1 shared publicationSaleema Noormohammed
Department of Applied Science, Aluminium Research Centre REGAL, University of Quebec at Chicoutimi
1 shared publication- Saleema Noormohammed
Department of Applied Science, Aluminium Research Centre REGAL, University of Quebec at Chicoutimi
1 shared publication
Latest Publications
- Open Access
Effect of GPTMS Passivation on Adhesive Bonding Performance of Aluminum Substrates Using an Epoxy Adhesive
This study investigates the effect of (3-glycidyloxypropyl)trimethoxysilane (GPTMS) passivation time on the adhesive bonding performance of aluminum substrates using an epoxy adhesive. Alkaline etching was used to generate a chemically active surface prior to silane treatment. GPTMS passivation led to the formation of silane-derived species on the aluminum surface. SEM/EDS indicated the presence of silicon-containing species. ATR-FTIR analysis showed the progressive development of siloxane (Si–O–Si) bonding with increasing passivation time. The mechanical performance of the bonded joints was evaluated using single-lap shear (SLS) testing. The SLS strength increased from 4.3 ± 1.0 MPa in the as-received substrate to 5.5 ± 1.2 MPa after etching. After GPTMS passivation, the strength reached a plateau beginning at 3 min, with a value of 13.5 ± 1.8 MPa. This corresponds to increases of 28% after etching and 223% after GPTMS passivation. This plateau behavior indicates a self-limiting interfacial process. The improved adhesion is attributed to siloxane formation within the silane layer and the chemical compatibility between GPTMS and the epoxy adhesive. A first-order conceptual semi-quantitative model was developed to relate silane surface coverage to adhesion strength. The results demonstrate that adhesion depends on both surface coverage and the development of siloxane bonding within the silane layer. This study highlights the importance of controlled passivation time in improving adhesion performance under the present experimental conditions.
Open AccessEffect of GPTMS Passivation on Adhesive Bonding Performance of Aluminum Substrates Using an Epoxy Adhesive
This study investigates the effect of (3-glycidyloxypropyl)trimethoxysilane (GPTMS) passivation time on the adhesive bonding performance of aluminum substrates using an epoxy adhesive. Alkaline etching was used to generate a chemically active surface prior to silane treatment. GPTMS passivation led to the formation of silane-derived species on the aluminum surface. SEM/EDS indicated the presence of silicon-containing species. ATR-FTIR analysis showed the progressive development of siloxane (Si–O–Si) bonding with increasing passivation time. The mechanical performance of the bonded joints was evaluated using single-lap shear (SLS) testing. The SLS strength increased from 4.3 ± 1.0 MPa in the as-received substrate to 5.5 ± 1.2 MPa after etching. After GPTMS passivation, the strength reached a plateau beginning at 3 min, with a value of 13.5 ± 1.8 MPa. This corresponds to increases of 28% after etching and 223% after GPTMS passivation. This plateau behavior indicates a self-limiting interfacial process. The improved adhesion is attributed to siloxane formation within the silane layer and the chemical compatibility between GPTMS and the epoxy adhesive. A first-order conceptual semi-quantitative model was developed to relate silane surface coverage to adhesion strength. The results demonstrate that adhesion depends on both surface coverage and the development of siloxane bonding within the silane layer. This study highlights the importance of controlled passivation time in improving adhesion performance under the present experimental conditions.
- 19 February 2026
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 40 (17) , 1-17
Atmospheric corona-plasma activation of Garolite composite for enhanced adhesive bonding with aluminum
- 19 February 2026
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 40 (17) , 1-17
Atmospheric corona-plasma activation of Garolite composite for enhanced adhesive bonding with aluminum
- 29 October 2024
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 39 (5) , 734-749
Surface treatment of PVC by corona discharged atmospheric air plasma for adhesive joining with AA 6061 aluminium alloy
- 29 October 2024
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 39 (5) , 734-749
Surface treatment of PVC by corona discharged atmospheric air plasma for adhesive joining with AA 6061 aluminium alloy
- 15 September 2023
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 54 (9) , 1092-1096
Simultaneous anodization and silanization for adhesive joining of AA 3031 using an epoxy adhesive
One step process, simultaneous anodization and silanization, to improve structural adhesive bonding of american aluminium 3031 alloy for wide ranges of applications was investigated. In this study, an optimized aqueous solution of zinc nitrate salt and a glycidoxy propyl‐trimethoxy silane was used as the electrolyte at a controlled temperature of ~5 °C with different current densities. The morphology of the deposited anodic layers revealed the presence of randomly clustered microstructures on the surface. The anodic layers formed with 120 m A cm−2 for 300 sec exhibited the most promising profile with optimum surface roughness among others, showing potentials for excellent mechanical anchoring of the adhesive within its rough structure. The infrared spectra and the energy‐dispersive x‐ray analysis also showed that these surfaces were chemically rich, indicating benefits of both mechanical and chemical bonds at the adhesive‐surface interface.
- 15 September 2023
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 54 (9) , 1092-1096
Simultaneous anodization and silanization for adhesive joining of AA 3031 using an epoxy adhesive
One step process, simultaneous anodization and silanization, to improve structural adhesive bonding of american aluminium 3031 alloy for wide ranges of applications was investigated. In this study, an optimized aqueous solution of zinc nitrate salt and a glycidoxy propyl‐trimethoxy silane was used as the electrolyte at a controlled temperature of ~5 °C with different current densities. The morphology of the deposited anodic layers revealed the presence of randomly clustered microstructures on the surface. The anodic layers formed with 120 m A cm−2 for 300 sec exhibited the most promising profile with optimum surface roughness among others, showing potentials for excellent mechanical anchoring of the adhesive within its rough structure. The infrared spectra and the energy‐dispersive x‐ray analysis also showed that these surfaces were chemically rich, indicating benefits of both mechanical and chemical bonds at the adhesive‐surface interface.