Ebru Koca Akkaya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ebru Koca Akkaya has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Mohd Ashraf Dar
Department of Environmental Engineering, Faculty of Civil Engineering, Yildiz Technical University, 34220 Esenler, Istanbul, Türkiye
3 shared publications Ahmet Demir
Department of Environmental Engineering, Faculty of Civil Engineering, Yildiz Technical University, Esenler, Istanbul, Turkey
2 shared publicationsGamze Varank
Department of Environmental Engineering, Faculty of Civil Engineering, Yildiz Technical University, Esenler, Istanbul, Turkey
2 shared publications- Garima Kaushik
Department of Environmental Science, School of Earth Sciences, Central University of Rajasthan, BandarSindri, Ajmer 305817, Rajasthan, India
2 shared publications - Mahdi Hassan
Department of Environmental Engineering, Yildiz Technical University, Davutpasa, Esenler, 34220 Istanbul, Türkiye
2 shared publications - Mehmet Sinan Bilgili
Yildiz Technical University
2 shared publications
Latest Publications
- Open Access
- 16 November 2026
- Published by MDPI AG in Pollutants
- Vol. 6 (4) , 76
Triazole Fungicides in Surface Waters: Toxicity and Their Ecological and Human Health Risk Assessment
Despite the positive aspects of fungicide use in enhancing agricultural yields and mitigating fungal diseases, their unregulated and indiscriminate use has raised substantial concerns regarding environmental integrity and the health of animals and humans. Upon exposure to triazole fungicides (TFs), the significant toxicological consequences in living beings are endocrine disruption and pronounced hepatotoxicity. Therefore, comprehensive exposure and toxicity assessment studies are essential for reducing the risks posed by TF residues to both humans and ecological systems. While the extensive literature and prior studies have examined TF occurrence or specific toxicity profiles, this study provides an updated screening synthesis that combines multi-regional surface water occurrence data with both ecotoxicological and preliminary human health risk characterizations within a unified analytical framework. Therefore, the present study provides an overview of the occurrence of TFs in surface waters, their toxicological effects, and risk assessment. Data on TF concentrations in surface waters were compiled manually from the literature reporting the occurrence and concentration of TFs, and risk assessments were performed using the risk quotient (RQ) and hazard quotient (HQ) methodologies. A total of sixteen commonly used agricultural TFs were evaluated based on the selected scientific reports, with reported concentrations indicating the widespread presence in freshwater systems. Ecotoxicological risk assessment revealed that difenoconazole (RQ 8.93) and epoxiconazole (RQ 5.65) in the River Madre de Dios and tebuconazole (RQ 2.04) in the Taihu Lake pose significant threats to aquatic ecosystems. In contrast, none of the evaluated TFs demonstrated a significant non-carcinogenic health risk to human populations under the assessed conditions. However, continued use of TFs may pose substantial ecological hazards, particularly in aquatic environments, underscoring the need for regular re-evaluation and strict regulatory oversight.
- 16 November 2026
- Published by MDPI AG in Pollutants
- Vol. 6 (4) , 76
Open AccessTriazole Fungicides in Surface Waters: Toxicity and Their Ecological and Human Health Risk Assessment
Despite the positive aspects of fungicide use in enhancing agricultural yields and mitigating fungal diseases, their unregulated and indiscriminate use has raised substantial concerns regarding environmental integrity and the health of animals and humans. Upon exposure to triazole fungicides (TFs), the significant toxicological consequences in living beings are endocrine disruption and pronounced hepatotoxicity. Therefore, comprehensive exposure and toxicity assessment studies are essential for reducing the risks posed by TF residues to both humans and ecological systems. While the extensive literature and prior studies have examined TF occurrence or specific toxicity profiles, this study provides an updated screening synthesis that combines multi-regional surface water occurrence data with both ecotoxicological and preliminary human health risk characterizations within a unified analytical framework. Therefore, the present study provides an overview of the occurrence of TFs in surface waters, their toxicological effects, and risk assessment. Data on TF concentrations in surface waters were compiled manually from the literature reporting the occurrence and concentration of TFs, and risk assessments were performed using the risk quotient (RQ) and hazard quotient (HQ) methodologies. A total of sixteen commonly used agricultural TFs were evaluated based on the selected scientific reports, with reported concentrations indicating the widespread presence in freshwater systems. Ecotoxicological risk assessment revealed that difenoconazole (RQ 8.93) and epoxiconazole (RQ 5.65) in the River Madre de Dios and tebuconazole (RQ 2.04) in the Taihu Lake pose significant threats to aquatic ecosystems. In contrast, none of the evaluated TFs demonstrated a significant non-carcinogenic health risk to human populations under the assessed conditions. However, continued use of TFs may pose substantial ecological hazards, particularly in aquatic environments, underscoring the need for regular re-evaluation and strict regulatory oversight.
- 20 October 2026
- Published by Elsevier in Bioresource Technology
- Vol. 464 (Pt C) , 136094
Machine learning based optimization of ultrasonic pretreatment and biogas prediction in livestock wastewater anaerobic digestion
- 20 October 2026
- Published by Elsevier in Bioresource Technology
- Vol. 464 (Pt C) , 136094
Machine learning based optimization of ultrasonic pretreatment and biogas prediction in livestock wastewater anaerobic digestion
- Open Access
- 8 October 2026
- Published by MDPI AG in Microorganisms
- Vol. 14 (10) , 2286
Bioprocess Engineering for Enhanced Zinc Solubilization Through Response Surface Methodology (RSM) by Newly Isolated Rhizobacteria
Zinc (Zn) is an essential micronutrient for optimum plant growth; however, Zn deficiency is widespread in agricultural soils due to the low availability of plant-accessible or soluble forms of Zn. Therefore, harnessing microorganisms’ ability to solubilize Zn can be a significant, environmentally beneficial contribution to sustainable agriculture. This study isolated Zn-solubilizing bacteria (ZnSB) from rhizosphere soil and assessed their capacity to solubilize Zn minerals (ZnO, ZnCO3). Based on qualitative and quantitative evaluation, the highest solubilization efficiency (345%) and 954 ± 46 mg Zn L−1, respectively, were observed in the AEYTU11 strain and were associated with a strong pH decrease in the culture medium. Based on phenotypic characterization and 16S rRNA sequence analysis, strain AEYTU11 was identified as Serratia marcescens. The in vitro solubilization potential of microbes is significantly influenced by process parameters, emphasizing the importance of optimizing the culture conditions to maximize microbial solubilization efficiency. A Box–Behnken design (BBD) experiment with 17 combinations of varying levels of insoluble Zn compound (0.5–1.5 g/L), pH (5–9), and incubation time (3–5 days) was used to model their effects on Serratia marcescens AEYTU11 strain-mediated Zn release from ZnCO3. Following process optimization, the solubilization efficiency of the AEYTU11 strain increased, achieving a maximum Zn solubilization capacity of 1608 ± 51 mg/L. The resulting model had high predictive ability (R2 = 0.9099) and showed that ZnCO3 concentrations were the most significant factor for the amounts of Zn released. In addition to Zn solubilization, AEYTU11 possess potassium (K) solubilization and extracellular enzyme production for protease and cellulose activity. The optimization findings highlight the value of statistical optimization tools for maximizing microbial Zn-solubilizing activity and improving biofertilizer development.
- 8 October 2026
- Published by MDPI AG in Microorganisms
- Vol. 14 (10) , 2286
Open AccessBioprocess Engineering for Enhanced Zinc Solubilization Through Response Surface Methodology (RSM) by Newly Isolated Rhizobacteria
Zinc (Zn) is an essential micronutrient for optimum plant growth; however, Zn deficiency is widespread in agricultural soils due to the low availability of plant-accessible or soluble forms of Zn. Therefore, harnessing microorganisms’ ability to solubilize Zn can be a significant, environmentally beneficial contribution to sustainable agriculture. This study isolated Zn-solubilizing bacteria (ZnSB) from rhizosphere soil and assessed their capacity to solubilize Zn minerals (ZnO, ZnCO3). Based on qualitative and quantitative evaluation, the highest solubilization efficiency (345%) and 954 ± 46 mg Zn L−1, respectively, were observed in the AEYTU11 strain and were associated with a strong pH decrease in the culture medium. Based on phenotypic characterization and 16S rRNA sequence analysis, strain AEYTU11 was identified as Serratia marcescens. The in vitro solubilization potential of microbes is significantly influenced by process parameters, emphasizing the importance of optimizing the culture conditions to maximize microbial solubilization efficiency. A Box–Behnken design (BBD) experiment with 17 combinations of varying levels of insoluble Zn compound (0.5–1.5 g/L), pH (5–9), and incubation time (3–5 days) was used to model their effects on Serratia marcescens AEYTU11 strain-mediated Zn release from ZnCO3. Following process optimization, the solubilization efficiency of the AEYTU11 strain increased, achieving a maximum Zn solubilization capacity of 1608 ± 51 mg/L. The resulting model had high predictive ability (R2 = 0.9099) and showed that ZnCO3 concentrations were the most significant factor for the amounts of Zn released. In addition to Zn solubilization, AEYTU11 possess potassium (K) solubilization and extracellular enzyme production for protease and cellulose activity. The optimization findings highlight the value of statistical optimization tools for maximizing microbial Zn-solubilizing activity and improving biofertilizer development.
- Open Access
- 8 October 2026
- Published by MDPI AG in Microplastics
- Vol. 5 (4) , 198
Micro(Nano) Plastics in Agricultural Systems: A Systematic Analysis of Pollution Dynamics in Fruits and Vegetables and Preliminary Dietary Exposure Estimation
Micro(nano) plastics (MNPs) are an unquestionable and significant environmental problem because of their greater persistence, widespread use and possible incursion into terrestrial ecosystems, particularly plants. The complex interactions between MNPs and soil are highlighted in this study, with particular attention paid to their absorption, fate, transport, and ensuing physiological consequences in the plant system. However, very little is known about the dangers of these particles being consumed by people via food contaminated with MNPs. Therefore, the purpose of this work was also to do a preliminary dietary exposure estimation of MNPs in VFs and to critically analyze the data that is currently available for MNPs in actual VFs. MNP concentrations in VFs ranged widely, from 1.8 to 195,500 p/g and 0.08–19.84 µg/g. Three indicators, pollution load index (PLI), estimated daily intake (EDI), and chronic daily intake (CDI) for adults and children for each type of VF, were chosen and established for a thorough assessment. Broccoli had the greatest pollution load index (PLI = 290) with a relative pollution level of IV. The EDI and CDI of MPs obtained for VFs varied from a minimum of 0.191 and 0.465 to a maximum of 6.408 × 105 MP/kg BW/day and 5.681 × 1013 MP/kg BW/day, respectively. Given the findings, toxicological and epidemiological research must be done to look at the potential health impacts of MNPs.
- 8 October 2026
- Published by MDPI AG in Microplastics
- Vol. 5 (4) , 198
Open AccessMicro(Nano) Plastics in Agricultural Systems: A Systematic Analysis of Pollution Dynamics in Fruits and Vegetables and Preliminary Dietary Exposure Estimation
Micro(nano) plastics (MNPs) are an unquestionable and significant environmental problem because of their greater persistence, widespread use and possible incursion into terrestrial ecosystems, particularly plants. The complex interactions between MNPs and soil are highlighted in this study, with particular attention paid to their absorption, fate, transport, and ensuing physiological consequences in the plant system. However, very little is known about the dangers of these particles being consumed by people via food contaminated with MNPs. Therefore, the purpose of this work was also to do a preliminary dietary exposure estimation of MNPs in VFs and to critically analyze the data that is currently available for MNPs in actual VFs. MNP concentrations in VFs ranged widely, from 1.8 to 195,500 p/g and 0.08–19.84 µg/g. Three indicators, pollution load index (PLI), estimated daily intake (EDI), and chronic daily intake (CDI) for adults and children for each type of VF, were chosen and established for a thorough assessment. Broccoli had the greatest pollution load index (PLI = 290) with a relative pollution level of IV. The EDI and CDI of MPs obtained for VFs varied from a minimum of 0.191 and 0.465 to a maximum of 6.408 × 105 MP/kg BW/day and 5.681 × 1013 MP/kg BW/day, respectively. Given the findings, toxicological and epidemiological research must be done to look at the potential health impacts of MNPs.
- Open Access
- 13 August 2026
- Published by Wiley in Water Environment Research
- Vol. 98 (8)
Nutrient Removal and Recovery: Hazenite Precipitation From Livestock Manure Wastewater
This study investigates simultaneous nutrient removal and recovery from nondigested livestock manure wastewater. To manage high suspended solids, chitosan‐mediated coagulation was utilized as a pretreatment for effective solid–liquid separation. Subsequent precipitation experiments evaluated the influence of pH, initial molar ratios, temperature, and multi‐ionic interference. Optimal conditions were identified at pH 9.5, a Mg:N:P molar ratio of 1.2:1:1, and 30°C, achieving aqueous reductions of 95% for PO 4 ‐P, 91% for Mg, and 97% for NH 4 ‐N. The primary scientific contribution of this study is the identification of Hazenite (KNaMg 2 (PO 4 ) 2 .14H 2 O) as the recovered solid phase, rather than conventional magnesium ammonium phosphate (struvite). Structural characterizations via XRD and SEM‐EDX revealed the absence of nitrogen in the recovered precipitate. These analyses indicate that the elevated background potassium and sodium concentrations drove the crystallization of this specific alkali‐magnesium phosphate. Thermodynamic and elemental analyses indicate that the extensive depletion of aqueous NH 4 ‐N was primarily driven by pH‐induced ammonia volatilization rather than solid‐phase recovery. Furthermore, ionic competition and kinetic inhibition restricted both ammonium and calcium integration into the crystal lattice. These findings demonstrate that in complex, alkali‐rich effluents, the precipitation pathway fundamentally shifts from standard struvite toward Hazenite recovery, providing an alternative for nutrient upcycling into high‐value mineral phases.
- 13 August 2026
- Published by Wiley in Water Environment Research
- Vol. 98 (8)
Open AccessNutrient Removal and Recovery: Hazenite Precipitation From Livestock Manure Wastewater
This study investigates simultaneous nutrient removal and recovery from nondigested livestock manure wastewater. To manage high suspended solids, chitosan‐mediated coagulation was utilized as a pretreatment for effective solid–liquid separation. Subsequent precipitation experiments evaluated the influence of pH, initial molar ratios, temperature, and multi‐ionic interference. Optimal conditions were identified at pH 9.5, a Mg:N:P molar ratio of 1.2:1:1, and 30°C, achieving aqueous reductions of 95% for PO 4 ‐P, 91% for Mg, and 97% for NH 4 ‐N. The primary scientific contribution of this study is the identification of Hazenite (KNaMg 2 (PO 4 ) 2 .14H 2 O) as the recovered solid phase, rather than conventional magnesium ammonium phosphate (struvite). Structural characterizations via XRD and SEM‐EDX revealed the absence of nitrogen in the recovered precipitate. These analyses indicate that the elevated background potassium and sodium concentrations drove the crystallization of this specific alkali‐magnesium phosphate. Thermodynamic and elemental analyses indicate that the extensive depletion of aqueous NH 4 ‐N was primarily driven by pH‐induced ammonia volatilization rather than solid‐phase recovery. Furthermore, ionic competition and kinetic inhibition restricted both ammonium and calcium integration into the crystal lattice. These findings demonstrate that in complex, alkali‐rich effluents, the precipitation pathway fundamentally shifts from standard struvite toward Hazenite recovery, providing an alternative for nutrient upcycling into high‐value mineral phases.
- 12 June 2026
- Published by IWA Publishing in Water Supply
- Vol. 26 (7) , 686-700
Membrane autopsy of reverse osmosis membrane module used for deionize brackish water
Reverse osmosis (RO) membrane systems are widely used in industrial water treatment; however, membrane fouling remains a major operational challenge that leads to performance deterioration and increased operational costs. In this study, a membrane autopsy was performed on a spiral-wound RO membrane module removed from a full-scale RO system operating in a food industry facility. Several analytical techniques, including X-ray fluorescence, X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and Fujiwara testing, were used to determine the chemical composition and the morphology of the foulants. The analytical results revealed that the dominant fouling components were calcium carbonate (CaCO3) and clay minerals. XRD analysis showed characteristic crystalline peaks corresponding to calcite, while FTIR spectra confirmed carbonate and silicate functional groups. SEM images revealed dense deposition layers associated with inorganic scaling and colloidal fouling. The findings demonstrate that membrane performance deterioration was primarily caused by combined inorganic scaling and fouling resulting from CaCO3 precipitation and clay mineral accumulation. The findings provide practical and site-specific insights into fouling mechanisms and highlight the importance of improved pretreatment strategies to control membrane fouling and mineral scaling, thereby enhancing the operational stability and lifespan of RO systems in industrial applications.
- 12 June 2026
- Published by IWA Publishing in Water Supply
- Vol. 26 (7) , 686-700
Membrane autopsy of reverse osmosis membrane module used for deionize brackish water
Reverse osmosis (RO) membrane systems are widely used in industrial water treatment; however, membrane fouling remains a major operational challenge that leads to performance deterioration and increased operational costs. In this study, a membrane autopsy was performed on a spiral-wound RO membrane module removed from a full-scale RO system operating in a food industry facility. Several analytical techniques, including X-ray fluorescence, X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and Fujiwara testing, were used to determine the chemical composition and the morphology of the foulants. The analytical results revealed that the dominant fouling components were calcium carbonate (CaCO3) and clay minerals. XRD analysis showed characteristic crystalline peaks corresponding to calcite, while FTIR spectra confirmed carbonate and silicate functional groups. SEM images revealed dense deposition layers associated with inorganic scaling and colloidal fouling. The findings demonstrate that membrane performance deterioration was primarily caused by combined inorganic scaling and fouling resulting from CaCO3 precipitation and clay mineral accumulation. The findings provide practical and site-specific insights into fouling mechanisms and highlight the importance of improved pretreatment strategies to control membrane fouling and mineral scaling, thereby enhancing the operational stability and lifespan of RO systems in industrial applications.
- 13 April 2026
- Published by Springer Nature in BioEnergy Research
- Vol. 19 (1)
Optimization of Ultrasound Pretreatment Applications in Biogas Production from Microalgae with the Taguchi Approach
- 13 April 2026
- Published by Springer Nature in BioEnergy Research
- Vol. 19 (1)
Optimization of Ultrasound Pretreatment Applications in Biogas Production from Microalgae with the Taguchi Approach
- 31 December 2025
- Published by Turkish Academy of Sciences
- p. 353-376
Yeşil Dönüşüm ve Döngüsel Ekonomi Kapsamında Endüstriyel Simbiyoz Temelli Çözümler
Green transformation and circular economy are paradigms that integrate environmental sustainability with economic growth. Industrial symbiosis lies at the intersection of these processes, increasing resource efficiency and reducing environmental burdens through waste and by-product sharing between industries. In this study, the impacts of global sustainability agreements such as the United Nations Sustainable Development Goals, the Kyoto Protocol, the Paris Climate Agreement and the European Green Deal on green transformation and the circular economy are analysed. In addition, the contribution of industrial symbiosis to circular economy and green transformation goals is examined both globally and within the Turkish context. Case studies such as Kalundborg (Denmark), Kawasaki (Japan), Rotterdam (Netherlands), Shanghai (China), Perth (Australia), Cape Town (South Africa) and Bursa (Türkiye) show that industrial symbiosis is effective in waste management and energy consumption. While industrial symbiosis plays a critical role in achieving Turkiye’s2053 net zero emission target, lack of sectoral coordination, technical infrastructure inadequacies and financing problems stand out as the main obstacles. However, policies such as the European Green Deal and the Carbon Border Adjustment Mechanism (CBAM) both encourage the expansion of industrial symbiosis and offer strategic opportunities for Turkiye’s export-oriented industries. In this study, the transformative potential of industrial symbiosis in strengthening environmental, economic, and social sustainability is highlighted, and recommendations are provided for decision-makers.
- 31 December 2025
- Published by Turkish Academy of Sciences
- p. 353-376
Yeşil Dönüşüm ve Döngüsel Ekonomi Kapsamında Endüstriyel Simbiyoz Temelli Çözümler
Green transformation and circular economy are paradigms that integrate environmental sustainability with economic growth. Industrial symbiosis lies at the intersection of these processes, increasing resource efficiency and reducing environmental burdens through waste and by-product sharing between industries. In this study, the impacts of global sustainability agreements such as the United Nations Sustainable Development Goals, the Kyoto Protocol, the Paris Climate Agreement and the European Green Deal on green transformation and the circular economy are analysed. In addition, the contribution of industrial symbiosis to circular economy and green transformation goals is examined both globally and within the Turkish context. Case studies such as Kalundborg (Denmark), Kawasaki (Japan), Rotterdam (Netherlands), Shanghai (China), Perth (Australia), Cape Town (South Africa) and Bursa (Türkiye) show that industrial symbiosis is effective in waste management and energy consumption. While industrial symbiosis plays a critical role in achieving Turkiye’s2053 net zero emission target, lack of sectoral coordination, technical infrastructure inadequacies and financing problems stand out as the main obstacles. However, policies such as the European Green Deal and the Carbon Border Adjustment Mechanism (CBAM) both encourage the expansion of industrial symbiosis and offer strategic opportunities for Turkiye’s export-oriented industries. In this study, the transformative potential of industrial symbiosis in strengthening environmental, economic, and social sustainability is highlighted, and recommendations are provided for decision-makers.
- 12 September 2024
- Published by Taylor & Francis in International Journal of Phytoremediation
- Vol. 27 (1) , 96-107
Investigating the impacts of a recirculation sedimentation application on microalgae biomass cultivation in wastewater treatment
Commercial microalgae production is often interrupted by contamination, leading to short production cycles, reinoculation needs, and culture collapses, significantly increasing costs. This study focuses on investigating Recirculated Sedimentation Application (RSA) to control contamination in microalgae culture systems used for wastewater treatment. Chlorella vulgaris culture was grown in an unsterilized mixture of tertiary treatment effluent and centrate of anaerobic digestion wastewater sludge over a 90-day experimental period. 60 L raceway reactor was operated under a light intensity of 275 mu M m(-2).s(-1) with a 16:8 h light-dark photoperiod. To evaluate the effect of RSA on biological-based problems, the experiment was conducted in three phases. The benefits of utilizing RSA were established through the following observations: effective removal of contaminants at an acceptable level without releasing the culture; extension of the biofilm formation time on the inner walls; inhibition of heterotrophic bacteria and nitrification; enhancement of the suspended solids retention capacity of the raceway tank (up to 770 mg.L-1); and improvement in ammonium removal rate to approximately 30 mg.L(-1)d(-1). The ideal salinity level for both ammonium removal and biomass concentration in RSA should be below 0.02%. These findings demonstrate the potential of phycoremediation for sustainable wastewater treatment and contribute to environmental bioremediation strategies.
- 12 September 2024
- Published by Taylor & Francis in International Journal of Phytoremediation
- Vol. 27 (1) , 96-107
Investigating the impacts of a recirculation sedimentation application on microalgae biomass cultivation in wastewater treatment
Commercial microalgae production is often interrupted by contamination, leading to short production cycles, reinoculation needs, and culture collapses, significantly increasing costs. This study focuses on investigating Recirculated Sedimentation Application (RSA) to control contamination in microalgae culture systems used for wastewater treatment. Chlorella vulgaris culture was grown in an unsterilized mixture of tertiary treatment effluent and centrate of anaerobic digestion wastewater sludge over a 90-day experimental period. 60 L raceway reactor was operated under a light intensity of 275 mu M m(-2).s(-1) with a 16:8 h light-dark photoperiod. To evaluate the effect of RSA on biological-based problems, the experiment was conducted in three phases. The benefits of utilizing RSA were established through the following observations: effective removal of contaminants at an acceptable level without releasing the culture; extension of the biofilm formation time on the inner walls; inhibition of heterotrophic bacteria and nitrification; enhancement of the suspended solids retention capacity of the raceway tank (up to 770 mg.L-1); and improvement in ammonium removal rate to approximately 30 mg.L(-1)d(-1). The ideal salinity level for both ammonium removal and biomass concentration in RSA should be below 0.02%. These findings demonstrate the potential of phycoremediation for sustainable wastewater treatment and contribute to environmental bioremediation strategies.