Hongze Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hongze Yang has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Qianen He
Fuzhou University
3 shared publications - Guobao He
School of Physics and Information Engineering, Fuzhou University, Fuzhou, China
2 shared publications Shen Chen
School of Physics and Information Engineering, Fuzhou University, Fuzhou, China
2 shared publicationsSheng Liu
School of Physics and Information Engineering, Fuzhou University, Fuzhou, China
2 shared publicationsDaqing Pan
College of Control Science and Engineering, Zhejiang University, Hangzhou, China
1 shared publication- Gongliu Yang
Zhejiang University
1 shared publication
Latest Publications
- 23 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. PP (1530437X) , 1
A Hybrid Physics–Data-Driven Navigation Method for AUVs Fusing Hydrographic Information with INS/DVL Integration
In GNSS-denied underwater environments, the navigation accuracy of Inertial Navigation Systems (INS) aided by Doppler Velocity Logs (DVL) is often severely degraded by complex hydrographic conditions. To address this, this paper proposes a hybrid physics and data driven integrated navigation method that fuses real-time hydrographic information to enhance performance. The approach establishes a layered error-suppression framework. At the physical layer, Conductivity-Temperature-Depth (CTD) sensors are used to construct real-time sound speed profiles, applying Snell’s law-based ray tracing to correct DVL sound-speed scale factors and refraction-induced geometry errors. At the data-driven layer, a hybrid CNN-MLP network intelligently estimates and compensates for residual ocean-current velocity disturbances remaining after physical corrections. Sea trial results validate the complementary contributions of the hybrid architecture: the physical layer effectively corrects acoustic geometric errors (reducing velocity RMSE by ∼35%), while the data-driven layer compensates for dynamic environmental residuals, ultimately reducing velocity RMSE by approximately 60% and suppressing position error by around 80%. This study validates that combining physics-based models with learning-based corrections effectively overcomes drift caused by DVL bottom-lock loss and time-varying currents, enabling high-accuracy, long-endurance AUV operations.
- 23 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. PP (1530437X) , 1
A Hybrid Physics–Data-Driven Navigation Method for AUVs Fusing Hydrographic Information with INS/DVL Integration
In GNSS-denied underwater environments, the navigation accuracy of Inertial Navigation Systems (INS) aided by Doppler Velocity Logs (DVL) is often severely degraded by complex hydrographic conditions. To address this, this paper proposes a hybrid physics and data driven integrated navigation method that fuses real-time hydrographic information to enhance performance. The approach establishes a layered error-suppression framework. At the physical layer, Conductivity-Temperature-Depth (CTD) sensors are used to construct real-time sound speed profiles, applying Snell’s law-based ray tracing to correct DVL sound-speed scale factors and refraction-induced geometry errors. At the data-driven layer, a hybrid CNN-MLP network intelligently estimates and compensates for residual ocean-current velocity disturbances remaining after physical corrections. Sea trial results validate the complementary contributions of the hybrid architecture: the physical layer effectively corrects acoustic geometric errors (reducing velocity RMSE by ∼35%), while the data-driven layer compensates for dynamic environmental residuals, ultimately reducing velocity RMSE by approximately 60% and suppressing position error by around 80%. This study validates that combining physics-based models with learning-based corrections effectively overcomes drift caused by DVL bottom-lock loss and time-varying currents, enabling high-accuracy, long-endurance AUV operations.
- 3 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (12) , 19454-19465
In-Motion Rapid and Robust Heading Alignment of Low-Cost Inertial Measurement Units Using Position Loci for Indoor Navigation
Low-cost Micro-Electro-Mechanical Inertial Measurement Units (MIMU) are widely used in various fields such as healthcare, sports, industry, and indoor navigation. However, rapid and robust heading alignment under dynamic conditions remains a challenge. A novel heading alignment method of low-cost MIMU using position loci for indoor navigation is proposed. Aiming at the state-of-the-art acceleration-based optimization-based alignment (ABOBA) method’s vulnerability to dynamic disturbances, observation equation of the initial attitude matrix is established based on velocity and position loci. On this basis, the Davenport’s q-method is adopted to estimate the initial attitude. Field tests are conducted under dynamic conditions with about 0.7 m/s to verify the performance of the proposed method and the effect of the referenced position error on the heading alignment is explored. Results show that the initial heading error could be quickly converged to less than 4° within 5 s, which is far better than the state-of-the-art method and is of significant merits to solve the challenge of in-motion accurate heading alignment under weak acceleration condition.
- 3 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (12) , 19454-19465
In-Motion Rapid and Robust Heading Alignment of Low-Cost Inertial Measurement Units Using Position Loci for Indoor Navigation
Low-cost Micro-Electro-Mechanical Inertial Measurement Units (MIMU) are widely used in various fields such as healthcare, sports, industry, and indoor navigation. However, rapid and robust heading alignment under dynamic conditions remains a challenge. A novel heading alignment method of low-cost MIMU using position loci for indoor navigation is proposed. Aiming at the state-of-the-art acceleration-based optimization-based alignment (ABOBA) method’s vulnerability to dynamic disturbances, observation equation of the initial attitude matrix is established based on velocity and position loci. On this basis, the Davenport’s q-method is adopted to estimate the initial attitude. Field tests are conducted under dynamic conditions with about 0.7 m/s to verify the performance of the proposed method and the effect of the referenced position error on the heading alignment is explored. Results show that the initial heading error could be quickly converged to less than 4° within 5 s, which is far better than the state-of-the-art method and is of significant merits to solve the challenge of in-motion accurate heading alignment under weak acceleration condition.
- 22 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (21) , 26677-26690
Reliability Enhancement Method of Attitude Estimation for Wearable Motion-Capture Systems in Human Lower Limb Rehabilitation
Wearable motion capture systems offer promising avenues for human lower limb rehabilitation.However, unstable data transmission and attitude estimation challenge their practical application.Aiming at this problem,a reliable method utilizing wearable inertial sensors for rehabilitation applications is innovatively proposed and implemented within our designed wearable motion capture system tailored to patients with impaired lower limbs.Stable data transmission process based on star-type bluetooth body sensor networks is designed by establishing a connection parameter setting method to guarantee reliable attitude estimation.Then, a robust attitude estimating method based on improved gradient descent method is proposed to promote the anti-interference capability of the algorithm by introducing trust coefficients.Lower limb motion capture experiments are conducted and results show that the proposed method enables the system to maintain a package loss rate of no more than 0.24% and has a maximum coefficient of variation of 5.9% during data transmission process.Attitude estimation reliability experiments reveal that the proposed algorithm substantially enhances anti-interference capabilities while preserving estimation accuracy. Compared to the state-of-the-art method, under acceleration shock, estimation errors decrease by up to 39.1%(roll), 42.9%(pitch), and20.2%(yaw). When exposed to external magnetic field interference, conventional estimation algorithms falter, whereas the proposed method maintains an average error within 2°. Significance analysis underscores the method’s distinctiveness at the 0.05% significance level (p<0.05). This study effectively bridges the gap between wearable inertial motion capture systems and their application in clinical lower limb rehabilitation.
- 22 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (21) , 26677-26690
Reliability Enhancement Method of Attitude Estimation for Wearable Motion-Capture Systems in Human Lower Limb Rehabilitation
Wearable motion capture systems offer promising avenues for human lower limb rehabilitation.However, unstable data transmission and attitude estimation challenge their practical application.Aiming at this problem,a reliable method utilizing wearable inertial sensors for rehabilitation applications is innovatively proposed and implemented within our designed wearable motion capture system tailored to patients with impaired lower limbs.Stable data transmission process based on star-type bluetooth body sensor networks is designed by establishing a connection parameter setting method to guarantee reliable attitude estimation.Then, a robust attitude estimating method based on improved gradient descent method is proposed to promote the anti-interference capability of the algorithm by introducing trust coefficients.Lower limb motion capture experiments are conducted and results show that the proposed method enables the system to maintain a package loss rate of no more than 0.24% and has a maximum coefficient of variation of 5.9% during data transmission process.Attitude estimation reliability experiments reveal that the proposed algorithm substantially enhances anti-interference capabilities while preserving estimation accuracy. Compared to the state-of-the-art method, under acceleration shock, estimation errors decrease by up to 39.1%(roll), 42.9%(pitch), and20.2%(yaw). When exposed to external magnetic field interference, conventional estimation algorithms falter, whereas the proposed method maintains an average error within 2°. Significance analysis underscores the method’s distinctiveness at the 0.05% significance level (p<0.05). This study effectively bridges the gap between wearable inertial motion capture systems and their application in clinical lower limb rehabilitation.
- Open Access
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Ultra-Wideband High Accuracy Distance Measurement Based on Hybrid Compensation of Temperature and Distance Error
Aiming at the signal propagation error and timestamp delay error of Ultra-wideband (UWB) positioning systems, a distance measurement method is proposed to reduce both temperature and distance effect. Influence of environmental factors on the signal propagation error is explored, using controlling variable means to quantize the effect of temperature and humidity. Tests indicate ranging error is strongly correlated with temperature rather than humidity. On this basis, a compensation model of temperature is established and statistical analysis is performed on 31 sets of experimental data to investigate the relationship between the timestamp delay error and distance. Hybrid compensation model of temperature and distance error is subsequently obtained and experiments are conducted to verify its accuracy and robustness. Results show that the distance measurement reaches an accuracy of centimeter level in the range of 0-190m with an error form of Gaussian distribution, which can greatly boost the performance of further positioning applications.
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessUltra-Wideband High Accuracy Distance Measurement Based on Hybrid Compensation of Temperature and Distance Error
Aiming at the signal propagation error and timestamp delay error of Ultra-wideband (UWB) positioning systems, a distance measurement method is proposed to reduce both temperature and distance effect. Influence of environmental factors on the signal propagation error is explored, using controlling variable means to quantize the effect of temperature and humidity. Tests indicate ranging error is strongly correlated with temperature rather than humidity. On this basis, a compensation model of temperature is established and statistical analysis is performed on 31 sets of experimental data to investigate the relationship between the timestamp delay error and distance. Hybrid compensation model of temperature and distance error is subsequently obtained and experiments are conducted to verify its accuracy and robustness. Results show that the distance measurement reaches an accuracy of centimeter level in the range of 0-190m with an error form of Gaussian distribution, which can greatly boost the performance of further positioning applications.