Feng Niu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Feng Niu has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
Yuexiang Huang
9 shared publicationsZeqi Wu
College of Materials and Chemistry China Jiliang University Hangzhou Zhejiang People's Republic of China
9 shared publicationsZiqi Dong
China Jiliang University
7 shared publications- Da Chen
China Jiliang University
6 shared publications Wenhao Yao
5 shared publicationsXiaofan Zhou
China Jiliang University
5 shared publications
Latest Publications
- 23 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (44) , 20907-20915
Sulfur-Vacancy-Engineered In2S3 Nanoflowers for Visible-Light-Driven One-Pot Upcycling of Polylactic Acid Waste to Alanine
The accumulation of polylactic acid (PLA) waste poses a growing environmental challenge, calling for sustainable upcycling strategies that transform waste plastics into value-added chemicals. Here, sulfur-vacancy-engineered In2S3 nanoflowers were synthesized through a facile hydrothermal method and applied as an efficient photocatalyst for visible-light-driven one-pot upcycling of PLA into alanine. The optimized In2S3−S0.2 catalyst exhibited an alanine formation rate of 3.32 mmol·g−1·h−1 at 50 °C under visible-light irradiation. Structural and photoelectrochemical characterizations revealed that the enhanced activity of In2S3−S0.2 was mainly attributed to the sulfur-vacancy-induced bandgap narrowing, suppressed charge-carrier recombination, and strengthened reduction capability toward imine intermediates. Combined with radical-trapping experiments and in situ EPR analysis, PLA was sequentially transformed through ammonolysis and photocatalytic amination pathways involving lactamide, ammonium lactate, carbon-centered radicals, amino radicals, and imine intermediates before alanine formation. Moreover, the catalyst exhibited excellent stability and enabled the direct conversion of post-consumer PLA products into alanine. This work demonstrates an effective defect-engineering strategy for sustainable photocatalytic upcycling of biodegradable plastics into value-added amino acids.
- 23 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (44) , 20907-20915
Sulfur-Vacancy-Engineered In2S3 Nanoflowers for Visible-Light-Driven One-Pot Upcycling of Polylactic Acid Waste to Alanine
The accumulation of polylactic acid (PLA) waste poses a growing environmental challenge, calling for sustainable upcycling strategies that transform waste plastics into value-added chemicals. Here, sulfur-vacancy-engineered In2S3 nanoflowers were synthesized through a facile hydrothermal method and applied as an efficient photocatalyst for visible-light-driven one-pot upcycling of PLA into alanine. The optimized In2S3−S0.2 catalyst exhibited an alanine formation rate of 3.32 mmol·g−1·h−1 at 50 °C under visible-light irradiation. Structural and photoelectrochemical characterizations revealed that the enhanced activity of In2S3−S0.2 was mainly attributed to the sulfur-vacancy-induced bandgap narrowing, suppressed charge-carrier recombination, and strengthened reduction capability toward imine intermediates. Combined with radical-trapping experiments and in situ EPR analysis, PLA was sequentially transformed through ammonolysis and photocatalytic amination pathways involving lactamide, ammonium lactate, carbon-centered radicals, amino radicals, and imine intermediates before alanine formation. Moreover, the catalyst exhibited excellent stability and enabled the direct conversion of post-consumer PLA products into alanine. This work demonstrates an effective defect-engineering strategy for sustainable photocatalytic upcycling of biodegradable plastics into value-added amino acids.
CeCl 3 ‐ N ‐Hydroxyphthalimide Complex as Semi‐Heterogeneous Photocatalyst for Selective Oxidation of Toluene to Benzaldehyde
The activation of inert C(sp 3 )‐H bonds is the rate‐determining step in photocatalytic selective oxidation of toluene, and the easy over‐oxidation of target products makes it a great challenge in green organic synthesis. Herein, we report a semi‐heterogeneous CeCl x ‐NHPI complex, which is constructed via the coordination of CeCl 3 and N‐Hydroxyphthalimide (NHPI) for the efficient visible‐light‐driven selective oxidation of toluene to benzaldehyde under ambient conditions. Impressively, the catalyst achieved a maximum benzaldehyde formation rate of up to 2 mmol·g −1 ·h −1 in 5 h, with a benzaldehyde selectivity of 80.6%. Mechanistic studies show that the chlorine radicals (Cl·) generated from the coordinated Ce─Cl bond via the ligand‐to‐metal charge transfer (LMCT) process, and the phthalimide‐N‐oxyl (PINO) radicals formed from NHPI via single‐electron transfer jointly promote the efficient activation of the inert C(sp 3 )‐H bond in toluene. In addition, the CeCl x ‐NHPI complex exhibits good recyclability and broad substrate tolerance for the selective oxidation of various toluene derivatives. This work provides a novel strategy for the design of efficient rare earth‐based semi‐heterogeneous photocatalysts for the activation of C(sp 3 )‐H bonds.
CeCl 3 ‐ N ‐Hydroxyphthalimide Complex as Semi‐Heterogeneous Photocatalyst for Selective Oxidation of Toluene to Benzaldehyde
The activation of inert C(sp 3 )‐H bonds is the rate‐determining step in photocatalytic selective oxidation of toluene, and the easy over‐oxidation of target products makes it a great challenge in green organic synthesis. Herein, we report a semi‐heterogeneous CeCl x ‐NHPI complex, which is constructed via the coordination of CeCl 3 and N‐Hydroxyphthalimide (NHPI) for the efficient visible‐light‐driven selective oxidation of toluene to benzaldehyde under ambient conditions. Impressively, the catalyst achieved a maximum benzaldehyde formation rate of up to 2 mmol·g −1 ·h −1 in 5 h, with a benzaldehyde selectivity of 80.6%. Mechanistic studies show that the chlorine radicals (Cl·) generated from the coordinated Ce─Cl bond via the ligand‐to‐metal charge transfer (LMCT) process, and the phthalimide‐N‐oxyl (PINO) radicals formed from NHPI via single‐electron transfer jointly promote the efficient activation of the inert C(sp 3 )‐H bond in toluene. In addition, the CeCl x ‐NHPI complex exhibits good recyclability and broad substrate tolerance for the selective oxidation of various toluene derivatives. This work provides a novel strategy for the design of efficient rare earth‐based semi‐heterogeneous photocatalysts for the activation of C(sp 3 )‐H bonds.
- 7 June 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (23) , 11855-11874
Advances in Catalytic Hydrogenolysis of Waste Plastics to Value-Added Products
- 7 June 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (23) , 11855-11874
Advances in Catalytic Hydrogenolysis of Waste Plastics to Value-Added Products
- 6 May 2026
- Published by Elsevier in Environmental Research
- Vol. 302, 124675
Advances in heterogeneous photocatalytic selective oxidation of toluene
- 6 May 2026
- Published by Elsevier in Environmental Research
- Vol. 302, 124675
Advances in heterogeneous photocatalytic selective oxidation of toluene
- 4 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Development of novel catalysts for selective amination of alcohols
Développement de nouveaux catalyseurs pour l'amination sélective d'alcools: Les amines sont des intermédiaires très importants pour l’industrie chimique et la science de la vie, qui peuvent être synthétisés par différentes voies traditionnelles. L’amination catalytique d’alcools à base de métaux via le mécanisme dit “d'emprunt d'hydrogène” est un moyen relativement efficace et respectueux de l’environnement pour la synthèse de différentes amines primaires. Toutefois, certains problèmes subsistent, tels que le coût élevé des métaux nobles, la faible sélectivité en amines primaires, ainsi que la faible stabilité et la recyclabilité des catalyseurs. Pour résoudre ce problème, différentes stratégies ont été appliquées. Les dépôts de carbone produits lors du prétraitement des catalyseurs avec des alcools dans les conditions optimales ont été utilisés pour améliorer de manière importante la sélectivité de l’amination d’alcools en amines primaires (de 30-50 à 80-90%). Cette amélioration provient de l’empêchement stérique de l’hydrogénation des imines secondaires sur des nanoparticules de cobalt partiellement décorées au carbone. Une approche efficace pour protéger le catalyseur au cobalt de la désactivation par la promotion avec du bismuth liquide a été décrite pour l’amination sélective du 1-octanol. La N-alkylation d’amines par des alcools sur un catalyseur hétérogène, peu coûteux et efficace, à base d’hydroxyde de titane a également été proposée. Le catalyseur à faible acidité de Brönsted fournit une sélectivité supérieure à 90% en amines secondaires lors la réaction des alcools aromatiques et aliphatiques fonctionnalisés avec les amines.
- 4 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Development of novel catalysts for selective amination of alcohols
Développement de nouveaux catalyseurs pour l'amination sélective d'alcools: Les amines sont des intermédiaires très importants pour l’industrie chimique et la science de la vie, qui peuvent être synthétisés par différentes voies traditionnelles. L’amination catalytique d’alcools à base de métaux via le mécanisme dit “d'emprunt d'hydrogène” est un moyen relativement efficace et respectueux de l’environnement pour la synthèse de différentes amines primaires. Toutefois, certains problèmes subsistent, tels que le coût élevé des métaux nobles, la faible sélectivité en amines primaires, ainsi que la faible stabilité et la recyclabilité des catalyseurs. Pour résoudre ce problème, différentes stratégies ont été appliquées. Les dépôts de carbone produits lors du prétraitement des catalyseurs avec des alcools dans les conditions optimales ont été utilisés pour améliorer de manière importante la sélectivité de l’amination d’alcools en amines primaires (de 30-50 à 80-90%). Cette amélioration provient de l’empêchement stérique de l’hydrogénation des imines secondaires sur des nanoparticules de cobalt partiellement décorées au carbone. Une approche efficace pour protéger le catalyseur au cobalt de la désactivation par la promotion avec du bismuth liquide a été décrite pour l’amination sélective du 1-octanol. La N-alkylation d’amines par des alcools sur un catalyseur hétérogène, peu coûteux et efficace, à base d’hydroxyde de titane a également été proposée. Le catalyseur à faible acidité de Brönsted fournit une sélectivité supérieure à 90% en amines secondaires lors la réaction des alcools aromatiques et aliphatiques fonctionnalisés avec les amines.
- 16 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (39) , 54943-54950
CeCl3-Mediated Photocatalytic Selective N-Alkylation of Aniline with Benzyl Alcohol over CdS
As the rate-determining step, the activation of alcohol significantly influences the product yield in photocatalytic C-N coupling reactions. Generally, the bare semiconductor-based photocatalysts exhibit poor selectivity of secondary amine during photocatalytic N-alkylation of amine with alcohol due to the excessive oxidation of alcohol to the corresponding aldehyde by photogenerated holes and subsequent easier imine formation without noble metal cocatalysts as hydrogen transfer centers. Herein, we reported a simple and efficient strategy via in situ coordination of an alcohol substrate with the inexpensive and readily available cerium(III) trichloride (CeCl3) to form Ce(OR)nClm complexes for photocatalytic selective N-alkylation of aniline with benzyl alcohol over the CdS photocatalyst. Remarkably, 100% aniline conversion and 88.5% selectivity with a formation yield of 9.56 mmol·g-1·h-1 toward the secondary amine N-benzylaniline were achieved in 5 h. The mechanistic studies reveal that the generated cerium complexes (Ce(OR)nClm) act as donors of transient benzaldehyde radicals (RCHO•) via a CeIV/CeIII redox cycle and a ligand-to-metal charge transfer (LMCT) process for subsequent radicals' addition to N-benzylaniline. In addition, the designed catalytic system demonstrates superior stability and substrate tolerance in the photocatalytic N-alkylation of diverse alcohols and amines.
- 16 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (39) , 54943-54950
CeCl3-Mediated Photocatalytic Selective N-Alkylation of Aniline with Benzyl Alcohol over CdS
As the rate-determining step, the activation of alcohol significantly influences the product yield in photocatalytic C-N coupling reactions. Generally, the bare semiconductor-based photocatalysts exhibit poor selectivity of secondary amine during photocatalytic N-alkylation of amine with alcohol due to the excessive oxidation of alcohol to the corresponding aldehyde by photogenerated holes and subsequent easier imine formation without noble metal cocatalysts as hydrogen transfer centers. Herein, we reported a simple and efficient strategy via in situ coordination of an alcohol substrate with the inexpensive and readily available cerium(III) trichloride (CeCl3) to form Ce(OR)nClm complexes for photocatalytic selective N-alkylation of aniline with benzyl alcohol over the CdS photocatalyst. Remarkably, 100% aniline conversion and 88.5% selectivity with a formation yield of 9.56 mmol·g-1·h-1 toward the secondary amine N-benzylaniline were achieved in 5 h. The mechanistic studies reveal that the generated cerium complexes (Ce(OR)nClm) act as donors of transient benzaldehyde radicals (RCHO•) via a CeIV/CeIII redox cycle and a ligand-to-metal charge transfer (LMCT) process for subsequent radicals' addition to N-benzylaniline. In addition, the designed catalytic system demonstrates superior stability and substrate tolerance in the photocatalytic N-alkylation of diverse alcohols and amines.
- 15 July 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 156
A bicarbonate “storage ball” for room temperature hydrogen storage over Pd/HKUST-1 catalyst
- 15 July 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 156
A bicarbonate “storage ball” for room temperature hydrogen storage over Pd/HKUST-1 catalyst
- 18 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (17) , 8595-8602
Pivotal Role of Surface Sulfur Atoms in CdS Nanoparticles for the C–C Coupling of Benzyl Alcohol
- 18 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (17) , 8595-8602
Pivotal Role of Surface Sulfur Atoms in CdS Nanoparticles for the C–C Coupling of Benzyl Alcohol
- 5 April 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 122, 229-234
Reversible conversion between bicarbonate and formate in solid state “storage ball” for chemical hydrogen storage
- 5 April 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 122, 229-234
Reversible conversion between bicarbonate and formate in solid state “storage ball” for chemical hydrogen storage