BSBrandon Stock

Brandon Stock

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Brandon Stock has a total of 3 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sensitivity Analysis of Mechanical Loading on Flow Through a Rough-Surfaced Fracture

    by Brandon Stock, Andrew Frampton, Diego Mas Ivars

    Fractured crystalline rocks are widely regarded as suitable host formations for applications such as deep geological repositories for spent nuclear fuel. Fluid flow within these formations predominantly occurs through networks of fractures characterised by internal heterogeneity and multiple contact points, both of which are strongly influenced by in situ stress conditions. These stresses may vary due to processes occurring on a wide range of time scales, from excavation-induced stress redistribution to glacial loading. Understanding the coupled hydro-mechanical mechanisms that govern flow through individual fractures is therefore essential for developing reliable large-scale discrete fracture network models. This study uses a coupled hydro-mechanical experiment on a rock sample containing a natural single fracture to evaluate the applicability of the local cubic law and the effects of normal loading on flow. The fracture aperture field was determined by 3D scanning the opposing fracture surfaces after opening, with vertical alignment refined using pressure film data. A sensitivity analysis of 27 alignment cases incorporating translational uncertainties along the x -, y - and z -directions was conducted to evaluate their influence on flow behaviour under increasing normal load. Results indicate that flow is highly sensitive to surface alignment, and that the local cubic law overestimates flow by at least two orders of magnitude for all loading cases. Applying a constant correction factor to convert mechanical to hydraulic aperture based on the unloaded cases fails to reproduce experimental flow rates as loading increases. A new expression relating the correction factor to contact area evolution under loading achieves close agreement with experimental data across all cases.

  • Open Access

    Hydro-mechanical loading effects on flow through a single natural fracture

    by Brandon Stock, Andrew Frampton, Diego Mas Ivars

    Fractured crystalline rocks are widely regarded as suitable host formations for waste isolation applications, including deep geological repositories for spent nuclear fuel. Fluid flow in these systems is predominantly controlled by networks of fractures whose hydraulic properties are governed by internal heterogeneity, contact area distribution, and stress-dependent aperture evolution. These properties are strongly influenced by in situ stress conditions, which may evolve over geological to engineering time scales due to processes such as glacial loading, stress redistribution, and excavation-induced damage. Robust representation of fracture-scale flow behaviour is therefore critical for the development and calibration of large-scale discrete fracture network models.In this study, we investigate the coupled hydro-mechanical behaviour of a natural single fracture using a laboratory-scale flow experiment under increasing normal load. The fracture aperture field was reconstructed using high-resolution 3D scanning of the opposing fracture surfaces, with vertical alignment refined using pressure-sensitive film measurements. A systematic sensitivity analysis of 27 alignment cases, incorporating translational uncertainties along the x-, y- and z-directions was performed to quantify their influence on flow behaviour. Measured flow rates were compared against predictions from the local cubic law under varying normal stress. Results demonstrate that flow is highly sensitive to fracture surface alignment, with misalignment along the flow direction and normal direction exerting the dominant influence. The local cubic law systematically overestimates flow by at least two orders of magnitude for all loading cases. Furthermore, the application of a constant correction factor to convert mechanical to hydraulic aperture, calibrated under unloaded conditions, fails to reproduce experimental flow rates as normal load increases. We propose a stress-dependent correction factor linked explicitly to the evolution of fracture contact area. Incorporating this relationship yields close agreement with experimental observations across all loading and alignment cases.

  • Open Access

    Rough-surfaced fracture generation with variable aperture using self-affine methods

    by Brandon Stock, Andrew Frampton

    Synthetic rough-surfaced fractures have been successfully generated using methods founded on self-affine principles, which can be based on properties obtained from fracture surface measurements. In order to generate fractures using self-affine methods, a function describing the correlation between the upper and lower surfaces is required, as well as two key parameters, the Hurst exponent H and a scaling parameter Sp. In current literature, there are several methods for determining H and Sp which are primarily adopted for measurements of 1-dimensional fracture traces. There are however comparatively few studies using these methods with measurements of surface scans and applying them to generate realistic fractures. In this work, we evaluate two methods commonly used, the root-mean-square correlation function (RMS-COR) and the Fourier Power Spectrum (FPS) approach, each with several variations of possible implementation when applied to measurements of fracture surfaces.To obtain an accurate representation of the aperture field and rough surfaces we use high resolution surface scans of a natural fracture sample. For each method variation 100 realisations of the aperture fields are generated and their respective ensembles are evaluated against the measured aperture distribution. The most accurate method for obtaining H and Sp in terms of its ability to generate apertures that correspond with the measured fracture sample studied was the RMS-COR method. We show a linear relationship between H and Sp that provides a best fit of synthetically generated fractures when compared with the measured fracture sample. We also introduce an improved approach for representing the correlation function between two rough surfaces. Finally, using a restricted subsection of the sample, we demonstrate the developed model can successfully generate upscaled fractures. Thus, aperture fields generated using this method can be used for representing and modelling larger fractures or multiple fractures in a network, allowing for numerical flow simulations to include realistic representations of aperture internal heterogeneity based on measurements obtained from a natural rock fracture.

  • Open Access

    Quantification of uncertainty for reactive solute transport in discrete fracture network models for crystalline rock with application to subsurface repositories for spent nuclear fuel

    by Andrew Frampton, Brandon Stock

    Uncertainty quantification of solute transport by groundwater flow is a critical component of safety assessments of geological repositories for spent nuclear fuel. Sparsely fractured crystalline rock provides a favourable geological environment because of its low permeability and tectonic stability. Although fracture occurrence may be sparse, fracture clusters may form connected pathways for groundwater flow and solute transport from a subsurface repository to the biosphere. However, reactive solutes including radionuclides are not only affected by advective flow but also experience diffusion into the rock matrix with retention mechanisms delaying plume migration. Therefore, it is of great importance to quantify uncertainties in the representation of DFNs to obtain useful constraints on uncertainties for reactive solute transport.In this contribution, a stochastic Lagrangian framework is used to calculate transport of reactive solutes obtained from advective particle trajectories in three-dimensional discrete fracture network models. Previous work has shown that accounting for internal fracture variability in DFN models enhances early advective particle arrival compared to the smooth fracture plane assumption. Here we investigate the effect of internal variability in permeability in DFNs for two classes of reactive solutes representing radionuclides, one dominated by diffusion and another by retention. The findings show that solutes which are dominated by retention are significantly affected by variable fracture permeability in DFNs, comparatively much more than those dominated by diffusion. We showcase how uncertainty in solute mass arrival can be quantified using the reactive transport framework methodology and discuss implications on transport assessments for cases where mechanical deformations cause changes to the internal variability of fractures.

  • Open Access

    Analysis and Generation of Rough-Surfaced Fractures with Variable Aperture Based on Self-Affine Methods Using Surface Scan Measurements

    by Brandon Stock, Andrew Frampton

    Methods founded on self-affine principles have successfully been used to generate synthetic rough-surfaced fractures, which can be based on properties inferred from measurements of fracture surfaces. Two key parameters, the Hurst exponent H and a scaling parameter Sp, together with a function describing the correlation between the surfaces forming the fracture, are needed. There are several methods for determining H and Sp in the literature, which are primarily adopted for measurements of 1-dimensional fracture traces. However, comparatively few studies have used these methods and applied them to aperture generation. In this study, we evaluate two commonly employed methods, the root-mean-square correlation function (RMS-COR) and the Fourier power spectrum (FPS) approach, each with several variations of their possible implementation when applied to measurements of fracture surfaces. We use high-resolution surface scans of a natural fracture sample to obtain an accurate representation of the aperture field and rough surfaces. Multiple realisations of aperture fields are generated for each method variation and their respective ensembles are evaluated against the aperture distribution of the measured fracture sample. For the fracture studied, the RMS-COR method is the most accurate method for obtaining H and Sp. We show that a linear relationship exists between H and Sp which provides a best fit of synthetically generated fractures when compared to the measured sample. Additionally, we introduce an improved approach for representing the correlation function between the two rough surfaces. Finally, we demonstrate that the model can successfully generate upscaled fracture apertures based on restricted subsections of the sample.


  • Open Access

    Fracture aperture generation using surface scan measurements of natural rock samples

    by Brandon Stock, Andrew Frampton

    In sparsely fractured crystalline rock, aperture variability exhibits significant control of the flow field through the fracture network. However, its inclusion in models is hampered due to a lack of field measurements and adequate numerical representation. A model for aperture generation is developed based on self-affine methods which includes two key parameters, the Hurst exponent and a scaling parameter, and which accounts for relative anisotropy and correlation between the adjacent surfaces forming the fracture. A methodology for analysing and extracting the necessary parameters from 3D surface scans of natural rock fractures is also developed. Analysis of the Hurst exponent and scaling parameter space shows that input combinations following a linear upper bound can be used to generate aperture fields which accurately reproduce measurements. It is also shown that the Hurst and scaling parameters are more sensitive than the correlation between the upper and lower fracture surfaces. The new model can produce an aperture ensemble that closely corresponds with the aperture obtained from the surface scans, and is an improvement on previous methods. The model is also successfully used to up-scale fracture apertures based on measurements restricted to a small sub-section of the sample. Thereby, the aperture fields generated using the model are representative of natural fracture apertures and can be implemented in larger scale fracture network models, allowing for numerical simulations to included representation of aperture internal heterogeneity.