Zhiyu Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhiyu Zhang has a total of 115 co-authors. Here are the top co-authors by number of shared publications:
- Yang Yang
Pennsylvania State University
13 shared publications - Saptarshi Das
Penn State University
9 shared publications Najam U Sakib
Engineering Science and Mechanics, Penn State University, University Park, USA
7 shared publications- Subir Ghosh
Engineering Science and Mechanics, Penn State University, University Park, USA
6 shared publications Dipanjan Sen
Engineering Science and Mechanics, Penn State University, University Park, USA
5 shared publications- Joan Marie Redwing
The Pennsylvania State University
5 shared publications
Latest Publications
- Open Access
- 28 September 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (63) , e75067
Epitaxially Integrated Electro‐Optic KNbO 3 Thin Films on Silicon
The absence of a native electro‐optic effect in silicon remains a fundamental limitation for integrated photonics, motivating the integration of ferroelectric oxides as active materials. Here, we report the first epitaxial integration of KNbO 3 thin films on silicon, establishing a new materials platform for silicon‐integrated electro‐optics. Silicon integration of KNbO 3 has remained unexplored due to potassium volatility challenges during synthesis. Employing suboxide molecular‐beam sources assisted by in situ RHEED monitoring and guided by thermodynamic simulations, we establish an adsorption‐controlled growth window for phase‐pure KNbO 3 films. Temperature dependent x‐ray diffraction, optical second‐harmonic generation, piezo‐response force microscopy, and transmission electron microscopy aided by phase‐field simulations confirm high‐quality epitaxial films with sharp interfaces and structural phase transitions mirroring KNbO 3 single crystals. Electro‐optic measurements demonstrate a linear Pockels response with an effective electro‐optic response of 146 ± 14 pm V −1 at 1550 nm. Phase‐field simulations further predict that modest compressive strain can drive the electro‐optic response to ∼900 pm V −1 . Beyond KNbO 3 , this integration pathway provides access to the broader (K,Na)(Ta,Nb)O 3 family, opening pathways to harness their strong electro‐optic response, nonlinear optical response, piezoelectric response and ferroelectric properties for next‐generation silicon photonics and electronics beyond current BaTiO 3 ‐based approaches.
- 28 September 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (63) , e75067
Open AccessEpitaxially Integrated Electro‐Optic KNbO 3 Thin Films on Silicon
The absence of a native electro‐optic effect in silicon remains a fundamental limitation for integrated photonics, motivating the integration of ferroelectric oxides as active materials. Here, we report the first epitaxial integration of KNbO 3 thin films on silicon, establishing a new materials platform for silicon‐integrated electro‐optics. Silicon integration of KNbO 3 has remained unexplored due to potassium volatility challenges during synthesis. Employing suboxide molecular‐beam sources assisted by in situ RHEED monitoring and guided by thermodynamic simulations, we establish an adsorption‐controlled growth window for phase‐pure KNbO 3 films. Temperature dependent x‐ray diffraction, optical second‐harmonic generation, piezo‐response force microscopy, and transmission electron microscopy aided by phase‐field simulations confirm high‐quality epitaxial films with sharp interfaces and structural phase transitions mirroring KNbO 3 single crystals. Electro‐optic measurements demonstrate a linear Pockels response with an effective electro‐optic response of 146 ± 14 pm V −1 at 1550 nm. Phase‐field simulations further predict that modest compressive strain can drive the electro‐optic response to ∼900 pm V −1 . Beyond KNbO 3 , this integration pathway provides access to the broader (K,Na)(Ta,Nb)O 3 family, opening pathways to harness their strong electro‐optic response, nonlinear optical response, piezoelectric response and ferroelectric properties for next‐generation silicon photonics and electronics beyond current BaTiO 3 ‐based approaches.
- Open Access
- 20 March 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (12) , eaeb6733
Ultrasensitive soft vibration sensors based on atomically thin metal dichalcogenide ribbon networks
The rapid progress of artificial intelligence (AI) and the internet of things (IoT) has driven growing demand for high-performance, skin-compatible vibration sensors capable of capturing subtle physiological and environmental signals. Low-dimensional materials offer unique advantages in sensitivity and flexibility, yet challenges remain in achieving high strain responsiveness, mechanical robustness, and large-area uniformity. Here, we report an ultrasensitive, low-profile, and stretchable vibration sensor based on large-area single-layer molybdenum disulfide (MoS 2 ) ribbon networks (SLRNs) grown via a vapor-liquid-solid mechanism. Embedding SLRNs within a thermoplastic elastomer [styrene-ethylene-butylene-styrene (SEBS)] yields record-high sensitivity among MoS 2 -based sensors, with gauge factors up to 5300 at 500 hertz), enabling deconvolution of complex stimuli. This work establishes a path toward ultrathin, ultrasensitive wearable sensors for health care and robotic applications.
- 20 March 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (12) , eaeb6733
Open AccessUltrasensitive soft vibration sensors based on atomically thin metal dichalcogenide ribbon networks
The rapid progress of artificial intelligence (AI) and the internet of things (IoT) has driven growing demand for high-performance, skin-compatible vibration sensors capable of capturing subtle physiological and environmental signals. Low-dimensional materials offer unique advantages in sensitivity and flexibility, yet challenges remain in achieving high strain responsiveness, mechanical robustness, and large-area uniformity. Here, we report an ultrasensitive, low-profile, and stretchable vibration sensor based on large-area single-layer molybdenum disulfide (MoS 2 ) ribbon networks (SLRNs) grown via a vapor-liquid-solid mechanism. Embedding SLRNs within a thermoplastic elastomer [styrene-ethylene-butylene-styrene (SEBS)] yields record-high sensitivity among MoS 2 -based sensors, with gauge factors up to 5300 at 500 hertz), enabling deconvolution of complex stimuli. This work establishes a path toward ultrathin, ultrasensitive wearable sensors for health care and robotic applications.
- Open Access
- 11 October 2025
- Published by Wiley in Advanced Materials
- Vol. 38 (3) , e07564
Colossal Cryogenic Electro‐Optic Response Through Metastability in Strained BaTiO 3 Thin Films
The search for thin film electro‐optic materials that can retain superior performance under cryogenic conditions has become critical for quantum computing. Barium titanate thin films show large linear electro‐optic coefficients in the tetragonal phase at room temperature, which is severely degraded down to ≈200 pm V −1 in the rhombohedral phase at cryogenic temperatures. There is immense interest in manipulating these phase transformations and retaining superior electro‐optic properties down to liquid helium temperature. Utilizing the thermodynamic theory of optical properties, a large low‐temperature electro‐optic response is designed by engineering the energetic competition between different ferroelectric phases, leading to a low‐symmetry monoclinic phase with a massive electro‐optic response. The existence of this phase is demonstrated in a strain‐tuned BaTiO 3 thin film that exhibits a linear electro‐optic coefficient of 2516 ± 100 pm V −1 at 5 K, which is an order of magnitude higher than the best reported performance thus far. Importantly, the electro‐optic coefficient increases by 100 × during cooling, unlike the conventional films, where it degrades. Further, at the lowest temperature, significant higher order electro‐optic responses also emerge. These results represent a new framework for designing materials with property enhancements by stabilizing highly tunable metastable phases with strain.
- 11 October 2025
- Published by Wiley in Advanced Materials
- Vol. 38 (3) , e07564
Open AccessColossal Cryogenic Electro‐Optic Response Through Metastability in Strained BaTiO 3 Thin Films
The search for thin film electro‐optic materials that can retain superior performance under cryogenic conditions has become critical for quantum computing. Barium titanate thin films show large linear electro‐optic coefficients in the tetragonal phase at room temperature, which is severely degraded down to ≈200 pm V −1 in the rhombohedral phase at cryogenic temperatures. There is immense interest in manipulating these phase transformations and retaining superior electro‐optic properties down to liquid helium temperature. Utilizing the thermodynamic theory of optical properties, a large low‐temperature electro‐optic response is designed by engineering the energetic competition between different ferroelectric phases, leading to a low‐symmetry monoclinic phase with a massive electro‐optic response. The existence of this phase is demonstrated in a strain‐tuned BaTiO 3 thin film that exhibits a linear electro‐optic coefficient of 2516 ± 100 pm V −1 at 5 K, which is an order of magnitude higher than the best reported performance thus far. Importantly, the electro‐optic coefficient increases by 100 × during cooling, unlike the conventional films, where it degrades. Further, at the lowest temperature, significant higher order electro‐optic responses also emerge. These results represent a new framework for designing materials with property enhancements by stabilizing highly tunable metastable phases with strain.
- Open Access
- 30 December 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-12
Multifunctional 2D FETs exploiting incipient ferroelectricity in freestanding SrTiO3 nanomembranes at sub-ambient temperatures
Incipient ferroelectricity bridges traditional dielectrics and true ferroelectrics, enabling advanced electronic and memory devices. Firstly, we report incipient ferroelectricity in freestanding SrTiO3 nanomembranes integrated with monolayer MoS2 to create multifunctional devices, demonstrating stable ferroelectric order at low temperatures for cryogenic memory devices. Our observation includes ultra-fast polarization switching (~10 ns), low switching voltage (3-gated MoS2 transistors at 15 K and up to 100 K. Additionally, we exploit room-temperature weak polarization switching, a feature of incipient ferroelectricity, to construct a physical reservoir for pattern recognition. Our results showcase the potential of utilizing perovskite material properties enabled by advancements in freestanding film growth and heterogeneous integration, for diverse functional applications. Notably, the low 180 °C thermal budget for fabricating the 3D-SrTiO3/2D-MoS2 device stack enables the integration of diverse materials into silicon complementary metal-oxide-semiconductor technology, addressing challenges in compute-in-memory and neuromorphic applications.
- 30 December 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-12
Open AccessMultifunctional 2D FETs exploiting incipient ferroelectricity in freestanding SrTiO3 nanomembranes at sub-ambient temperatures
Incipient ferroelectricity bridges traditional dielectrics and true ferroelectrics, enabling advanced electronic and memory devices. Firstly, we report incipient ferroelectricity in freestanding SrTiO3 nanomembranes integrated with monolayer MoS2 to create multifunctional devices, demonstrating stable ferroelectric order at low temperatures for cryogenic memory devices. Our observation includes ultra-fast polarization switching (~10 ns), low switching voltage (3-gated MoS2 transistors at 15 K and up to 100 K. Additionally, we exploit room-temperature weak polarization switching, a feature of incipient ferroelectricity, to construct a physical reservoir for pattern recognition. Our results showcase the potential of utilizing perovskite material properties enabled by advancements in freestanding film growth and heterogeneous integration, for diverse functional applications. Notably, the low 180 °C thermal budget for fabricating the 3D-SrTiO3/2D-MoS2 device stack enables the integration of diverse materials into silicon complementary metal-oxide-semiconductor technology, addressing challenges in compute-in-memory and neuromorphic applications.
- Open Access
- 14 November 2024
- Published by Springer Nature in Nature Electronics
- Vol. 8 (1) , 93
Publisher Correction: High-performance p-type field-effect transistors using substitutional doping and thickness control of two-dimensional materials
- 14 November 2024
- Published by Springer Nature in Nature Electronics
- Vol. 8 (1) , 93
Open AccessPublisher Correction: High-performance p-type field-effect transistors using substitutional doping and thickness control of two-dimensional materials
- Top Cited Papers
- 6 November 2024
- Published by Springer Nature in Nature Electronics
- Vol. 8 (1) , 24-35
High-performance p-type field-effect transistors using substitutional doping and thickness control of two-dimensional materials
- 6 November 2024
- Published by Springer Nature in Nature Electronics
- Vol. 8 (1) , 24-35
Top Cited PapersHigh-performance p-type field-effect transistors using substitutional doping and thickness control of two-dimensional materials
- 9 October 2024
- Published by Springer Nature in Nature Electronics
- Vol. 7 (10) , 892-903
Monolithic and heterogeneous three-dimensional integration of two-dimensional materials with high-density vias
- 9 October 2024
- Published by Springer Nature in Nature Electronics
- Vol. 7 (10) , 892-903
Monolithic and heterogeneous three-dimensional integration of two-dimensional materials with high-density vias
- Top Cited PapersOpen Access
- 1 August 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-13
Ubiquitous short-range order in multi-principal element alloys
Recent research in multi-principal element alloys (MPEAs) has increasingly focused on the role of short-range order (SRO) on material performance. However, the mechanisms of SRO formation and its precise control remain elusive, limiting the progress of SRO engineering. Here, leveraging advanced additive manufacturing techniques that produce samples with a wide range of cooling rates (up to 10 7 K s −1 ) and an enhanced semi-quantitative electron microscopy method, we characterize SRO in three CoCrNi-based face-centered-cubic (FCC) MPEAs. Surprisingly, irrespective of the processing and thermal treatment history, all samples exhibit similar levels of SRO. Atomistic simulations reveal that during solidification, prevalent local chemical order arises in the liquid-solid interface (solidification front) even under the extreme cooling rate of 10 11 K s −1 . This phenomenon stems from the swift atomic diffusion in the supercooled liquid, which matches or even surpasses the rate of solidification. Therefore, SRO is an inherent characteristic of most FCC MPEAs, insensitive to variations in cooling rates and even annealing treatments typically available in experiments.
- 1 August 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-13
Top Cited PapersOpen AccessUbiquitous short-range order in multi-principal element alloys
Recent research in multi-principal element alloys (MPEAs) has increasingly focused on the role of short-range order (SRO) on material performance. However, the mechanisms of SRO formation and its precise control remain elusive, limiting the progress of SRO engineering. Here, leveraging advanced additive manufacturing techniques that produce samples with a wide range of cooling rates (up to 10 7 K s −1 ) and an enhanced semi-quantitative electron microscopy method, we characterize SRO in three CoCrNi-based face-centered-cubic (FCC) MPEAs. Surprisingly, irrespective of the processing and thermal treatment history, all samples exhibit similar levels of SRO. Atomistic simulations reveal that during solidification, prevalent local chemical order arises in the liquid-solid interface (solidification front) even under the extreme cooling rate of 10 11 K s −1 . This phenomenon stems from the swift atomic diffusion in the supercooled liquid, which matches or even surpasses the rate of solidification. Therefore, SRO is an inherent characteristic of most FCC MPEAs, insensitive to variations in cooling rates and even annealing treatments typically available in experiments.
- Top Cited Papers
- 23 July 2024
- Published by Springer Nature in Nature Nanotechnology
- Vol. 19 (7) , 970-977
Monolithic three-dimensional integration of complementary two-dimensional field-effect transistors
The semiconductor industry is transitioning to the ‘More Moore’ era, driven by the adoption of three-dimensional (3D) integration schemes surpassing the limitations of traditional two-dimensional scaling. Although innovative packaging solutions have made 3D integrated circuits (ICs) commercially viable, the inclusion of through-silicon vias and microbumps brings about increased area overhead and introduces parasitic capacitances that limit overall performance. Monolithic 3D integration (M3D) is regarded as the future of 3D ICs, yet its application faces hurdles in silicon ICs due to restricted thermal processing budgets in upper tiers, which can degrade device performance. To overcome these limitations, emerging materials like carbon nanotubes and two-dimensional semiconductors have been integrated into the back end of silicon ICs. Here we report the M3D integration of complementary WSe2 FETs, in which n-type FETs are placed in tier 1 and p-type FETs are placed in tier 2. In particular, we achieve dense and scaled integration through 300 nm vias with a pitch of <1 µm, connecting more than 300 devices in tiers 1 and 2. Moreover, we have effectively implemented vertically integrated logic gates, encompassing inverters, NAND gates and NOR gates. Our demonstration highlights the two-dimensional materials’ role in advancing M3D integration in complementary metal–oxide–semiconductor circuits.
- 23 July 2024
- Published by Springer Nature in Nature Nanotechnology
- Vol. 19 (7) , 970-977
Top Cited PapersMonolithic three-dimensional integration of complementary two-dimensional field-effect transistors
The semiconductor industry is transitioning to the ‘More Moore’ era, driven by the adoption of three-dimensional (3D) integration schemes surpassing the limitations of traditional two-dimensional scaling. Although innovative packaging solutions have made 3D integrated circuits (ICs) commercially viable, the inclusion of through-silicon vias and microbumps brings about increased area overhead and introduces parasitic capacitances that limit overall performance. Monolithic 3D integration (M3D) is regarded as the future of 3D ICs, yet its application faces hurdles in silicon ICs due to restricted thermal processing budgets in upper tiers, which can degrade device performance. To overcome these limitations, emerging materials like carbon nanotubes and two-dimensional semiconductors have been integrated into the back end of silicon ICs. Here we report the M3D integration of complementary WSe2 FETs, in which n-type FETs are placed in tier 1 and p-type FETs are placed in tier 2. In particular, we achieve dense and scaled integration through 300 nm vias with a pitch of <1 µm, connecting more than 300 devices in tiers 1 and 2. Moreover, we have effectively implemented vertically integrated logic gates, encompassing inverters, NAND gates and NOR gates. Our demonstration highlights the two-dimensional materials’ role in advancing M3D integration in complementary metal–oxide–semiconductor circuits.
- Open Access
- 1 April 2024
- Published by Springer Nature in Research Square
A design strategy for high-performance p-type two-dimensional field effect transistors
Doping plays a critical role in tailoring the characteristics of semiconducting materials and electronic devices. Specifically, in the context of field-effect transistors (FETs), degenerate doping in the silicon channel beneath the source and drain regions has become essential for achieving high-performance n- and p-type devices, as well as significantly reducing contact resistance (R_C). In contrast, two-dimensional (2D) semiconductors have mainly relied on metal work-function engineering to lower R_C. While this approach has proven successful for n-type 2D FETs due to the natural tendency of the metal Fermi level to align near the conduction band edge, it has been challenging to achieve the same for p-type 2D FETs. To address this, first, we demonstrate that degenerate p-type doping can be accomplished in thick (>3 monolayers) MoSe2 and WSe2 FETs through substitutional doping of transition metal with V, Nb, and Ta. However, the degenerate doping leads to weakened electrostatic gate control, resulting in a poor on/off current ratio. Interestingly, the doping effectiveness is significantly reduced in thinner flakes (< 3 monolayers) due to strong quantum confinement effects, thereby restoring the electrostatic gate control. Based on this observation, we designed a FET structure where the channel is constructed using thinner 2D material, while the contact regions consist of degenerately doped thicker layers, allowing us to achieve both low R_C and high on/off current ratio. The doping and device design approach we propose should be just as relevant for synthetic 2D materials and n-type 2D FETs. Our insights may steer the direction of large-scale synthesis methods, prioritizing the creation of doped multilayers over monolayers to further progress in 2D FET technology.
- 1 April 2024
- Published by Springer Nature in Research Square
Open AccessA design strategy for high-performance p-type two-dimensional field effect transistors
Doping plays a critical role in tailoring the characteristics of semiconducting materials and electronic devices. Specifically, in the context of field-effect transistors (FETs), degenerate doping in the silicon channel beneath the source and drain regions has become essential for achieving high-performance n- and p-type devices, as well as significantly reducing contact resistance (R_C). In contrast, two-dimensional (2D) semiconductors have mainly relied on metal work-function engineering to lower R_C. While this approach has proven successful for n-type 2D FETs due to the natural tendency of the metal Fermi level to align near the conduction band edge, it has been challenging to achieve the same for p-type 2D FETs. To address this, first, we demonstrate that degenerate p-type doping can be accomplished in thick (>3 monolayers) MoSe2 and WSe2 FETs through substitutional doping of transition metal with V, Nb, and Ta. However, the degenerate doping leads to weakened electrostatic gate control, resulting in a poor on/off current ratio. Interestingly, the doping effectiveness is significantly reduced in thinner flakes (< 3 monolayers) due to strong quantum confinement effects, thereby restoring the electrostatic gate control. Based on this observation, we designed a FET structure where the channel is constructed using thinner 2D material, while the contact regions consist of degenerately doped thicker layers, allowing us to achieve both low R_C and high on/off current ratio. The doping and device design approach we propose should be just as relevant for synthetic 2D materials and n-type 2D FETs. Our insights may steer the direction of large-scale synthesis methods, prioritizing the creation of doped multilayers over monolayers to further progress in 2D FET technology.