AAAmeer H. Al-Rubaye

Ameer H. Al-Rubaye

*This is an algorithmically generated author record based on publicly available information.

Ameer H. Al-Rubaye has a total of 61 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Novel Eco‐Friendly Electrode: Copper Nanoparticle‐Doped MWCNTs for Green Electro‐Organic Synthesis of 1,2,3‐Triazoles With ChCl/Urea as a Solvent and Cocatalyst

    by Ali Basem, Shomansur Sh. Sagdullaev, Zaman Abdalhussein Ibadi Alaridhee, Aiham O. Altayeh, Nadhir N. A. Jafar, Majid S. Jabir, Hasan Majdi, Ameer H. Al‐Rubaye, Moamel Dheyaa Jumaah, Lola M. Usmonova, et al.

    Meticulous electrode design is pivotal in advancing greener and more sustainable electro‐organic synthesis practices. In this research, our team designed and synthesized a copper‐doped electrode on multiwalled carbon nanotubes (MWCNTs) and characterized it using Fourier transform infrared spectroscopy (FT‐IR), scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy (EDS), thermogravimetric analysis (TGA), Brunauer–Emmett–Teller (BET) analysis, X‐ray diffraction (XRD) analysis, X‐ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV) analysis. Subsequently, this electrode was utilized as a catalyst at the electrode surface, serving as a cathode in electro‐oxidation reactions in the presence of phenylacetylene, sodium azide (NaN3), and benzyl halide for the production of 1,2,3‐triazole derivatives under ambient temperature, within a 30‐min reaction time, and at atmospheric pressure, achieving an efficiency level ranging from good to excellent, specifically between 88% and 96%. The synthesized 1,2,3‐triazole derivatives were identified using proton nuclear magnetic resonance (1H NMR) spectroscopy, CHN elemental analysis, and melting point. In this paper, choline chloride/urea deep eutectic solvents (DES) serve multiple roles in the reaction mechanism. They function as solvents and co‐catalysts, generate weak bases, and provide numerous advantages in green chemistry. These advantages include low toxicity, reduced environmental risks, improved atom economy, and non‐volatility, making them safer alternatives to traditional organic solvents.


  • Green Synthesis of Quinazolinones via Selective Electro‐oxidation Using Iron Electrode and NaCl Electrolyte as an Eco‐friendly Electrolyte

    by Ali Basem, Ahmed M. Naglah, Zaman Abdalhussein Ibadi Alaridhee, Aiham O. Altayeh, Ameer H. Al‐Rubaye, Yusupova Ugiloy, Usmanov Durbek, Elyor Berdimurodov, Abdulrahman A. Almehizia, Amer Alhaj Zen

    Primary alcohols 2(a–h) and o‐aminobenzamides 1(a–h) can be selectively oxidized electrochemically to yield dihydroquinazolinone 4(a–h) and quinazolinones 5(a–h) in an efficient and chemoselective manner. This methodology employs sodium chloride (NaCl) 3(a) as a co‐catalyst and electricity as the oxidizing agent, utilizing cost‐effective and commercially available materials such as Graphite anode, Iron (Fe) cathode, and isopropyl alcohol (iPrOH) as a solvent and weak base. The synthesis yields various quinazolinone derivatives with diverse structural characteristics in good quantities, showcasing the method‘s broad applicability. This approach facilitates the production of a range of dihydroquinazolinones and quinazolinones (24 examples), highlighting its versatility and compatibility with different functional groups. Characterization of the synthesized derivatives included CHN analysis, 1 HNMR spectroscopy, and determination of melting points.


  • Open Access

    Enhance Tight Oil Reservoir Recovery Based on Co2-Water Flooding as Environmentally Friendly Method: Case Study

    by Ameer H. Al-Rubaye, Safiyya A. Jassam, Adnan Ajam Abed, Ameen A. Al-Muntaser, Dheyaa J. Jasim, Adamu Usman Mohammed

    In most cases, a tight oil reservoir is characterized by a high capillary pressure, a complex interaction between oil and water, and the absence of a consistent Oil-Water Contact (OWC) or pressure distribution. It is possible that the incorporation of carbon dioxide would be significant due to the fact that it has the capability of reducing the viscosity of crude oil following the injection of CO2 and increasing the sweep efficiency in porous media. Waterflood recovery, on the other hand, has emerged as the preeminent form of oil recovery due to a number of technological and economic factors. This approach is responsible for the vast majority of the oil that is produced around the world. Some of the potential challenges that may be ascribed to water injection include fluid incompatibility, reservoir heterogeneity, early breakthrough through thief zones, permeability deterioration caused by particles in suspension, and clay swelling. These are only some of the potential hurdles. The development of the Sa’di reservoir in the Halfaya oilfield was investigated in this study. The assumption that the reservoir is comprised of four wells provided the basis for the investigation. The Sa’di-B reservoir research has as its major purpose the prediction of future reservoir performance depending on a variety of production scenarios, as well as the selection of the reservoir development strategy that is both the most efficient and the most environmentally friendly. As a consequence of the findings, oil production starts to gradually decrease after five years of production, which is accompanied by an increase in water cut. This is because the reservoir is a type of tight reservoir, and the OWC starts to climb over its normal level. In order to solve this issue, it is recommended that the perforation locations be moved away from OWC. As a result, it is possible to reach the conclusion that the method of increasing crude oil production through the use of carbon dioxide flooding and water re-injection is among the most environmentally benign approaches.

  • Nano-SiO2@nPr@DPyE-Ni: a novel nanocatalyst for the rapid production of symmetric di-aryl sulfides and pyrazolones

    by Hamad AlMohamadi, Carlos Rodriguez-Benites, Pooja Bansal, Ahmed Huseen Redhee, Dmitry Olegovich Bokov, Ameer H. Al-Rubaye, Maytham T. Qasim, Abhinav Kumar, Yasser Fakri Mustafa, Maryam Sadat Ghorayshi Nejad


  • Effective Role of Two Layers of Silica in the Performance of Fe3O4@xSiO2@ySiO2@BisPyP-Ni Core-Shell Catalyst for C-C and C-S Coupling Reactions

    by Ebraheem Abdu Musad Saleh, Asmaa F. Kassem, Farag M. A. Altalbawy, Sarah Jawad Shoja, Dmitry Olegovich Bokov, Ahmed Elawady, Ameer H. Al-Rubaye, Abdulnaser Saud, Zuhair I. Al-Mashhadani, Maryam Sadat Ghorayshi Nejad


  • EVOLUTION OF WEAR AND CORROSION RESISTANCE OF Bi ALLOY-LAMINATED Al/TiO2 COMPOSITE STRIPS FABRICATED VIA APB PROCESS

    by H. Asadollahi Yazdi, Wade Ghribi, Manal A. Abbood, Ameer H. Al-Rubaye, Karrar Hatif Mohamed

    In this study, Bi alloy AA1100/TiO2/AA5083 composites were produced by accumulative press bonding (APB) for the first time. In the first step, two bars of aluminum alloys 1100 and 5083 with 5[ ]wt.% of uniformly scattered TiO2 particles were stacked together and pressed with a 50% reduction ratio. Then, this process was continued up to six steps. Corrosion properties of composites were studied by potential dynamic polarization and electrochemical impedance spectroscopy measurement in 3.5[ ]wt.% NaCl solution. So, in this investigation and as its novelty, a considerable improvement was revealed in the main electrochemical parameters as a result of enhancing the influence of APB steps and the inert character of the particles. Moreover, using the wear test, the wear resistance of these bi alloy composites has been studied vs the APB steps. Also, the wear and electrochemical experiments showed that corrosion and wear resistance of samples were improved by the APB steps by 70% and 34%, respectively.


  • Modified electrodes: Utilizing Cu‐modified graphene oxide nanosheets as a cathode in electro‐oxidation synthesis of mild Suzuki–Miyaura cross‐coupling reaction under green and sustainable conditions

    by Sherzod Abdullaev, Durgesh Singh, Mohammed N. Al‐Delfi, Abhinav Kumar, Qusay Husam Aziz, Ahmed Elawady, Mohammed A. Al‐Anber, Ameer H. Al‐Rubaye, Amjad Ali, Naushad Ahmad

    This study presents an eco‐conscious approach to enhance the efficiency of the Suzuki–Miyaura cross‐coupling reaction. We first synthesized graphene oxide nanosheets using the Hummers method and then coated them to incorporate metallic copper on their surface. Following this, we conducted various analyses, including Fourier transform infrared spectroscopy (FT‐IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) analysis, cyclic voltammetry (CV), and energy‐dispersive X‐ray spectroscopy (EDS) identification, to characterize these modified nanosheets. Subsequently, we utilized Cu‐modified graphene oxide nanosheets as cathode catalysts in an electro‐oxidation synthesis setup. To verify the effectiveness of this novel approach, we utilized bromobenzene and phenylboronic acid as model substrates to synthesize biphenyl compounds. The reaction yielded impressive product yields ranging from 87% to 93%. Operating under environmentally friendly conditions, this electro‐oxidation synthesis not only enhances selectivity but also significantly reduces the environmental impact of the reaction. Our findings highlight the potential of this green chemistry strategy, offering a promising avenue for sustainable and efficient organic synthesis, as evidenced by the successful coupling of bromobenzene and phenylboronic acid with consistently high yields.


  • Producing p‐tolylmethanol derivatives through an eco‐friendly electro‐organic method: A highly efficient Grignard reaction utilizing a magnesium electrode

    by Sherzod Abdullaev, Zaman Abdalhussein Ibadi Alaridhee, Media Noori Abdullah, Mohammed Qasim Alasheqi, Laith Yassen Qassem, Abhinav Kumar, Ahmed Elawady, Ameer H. Al‐Rubaye, Amjad Ali, Naushad Ahmad

    This research introduces an eco‐friendly and innovative technique for efficiently producing p‐tolylmethanol derivatives 4(a–k) using electro‐organic synthesis based on the Grignard reaction. By employing electrochemical methods, this approach offers several advantages, including enhanced reaction efficiency and reduced environmental impact. The process involves the electrochemical generation of the Grignard reagent, followed by its reaction with appropriate substrates to yield the desired p‐tolylmethanol derivatives. Our team optimized various reaction parameters like choice of solvent, electrode material, and reaction conditions to achieve high yields and selectivity. The developed electro‐organic method demonstrated outstanding efficiency and presents a fresh and environmentally conscious approach to synthesizing p‐tolylmethanol derivatives from benzaldehyde 1(a–e) and bromobenzene 2(a–h) via the Grignard reaction, yielding excellent results (85–93%). The resulting compounds were comprehensively characterized using melting point, 1H NMR spectroscopy, and CHN analysis to verify their structures. This electro‐organic approach holds significant potential as a sustainable strategy for synthesizing valuable organic compounds.


  • Open Access

    Optimizing Energy and Reserve Minimization in a Sustainable Microgrid with Electric Vehicle Integration: Dynamic and Adjustable Manta Ray Foraging Algorithm

    by Adnan Ajam Abed, Mahmood Sh. Suwaed, Ameer H. Al-Rubaye, Omar I. Awad, M. N. Mohammed, Hai Tao, Kumaran Kadirgama, Ali A. H. Karah Bash

    The growing presence of EVs in regional microgrids introduces increased variability and uncertainty in the areas’ load profiles. This paper presents a novel approach for optimizing energy and reserve minimization in a sustainable integrated microgrid with electric vehicles (EVs) by the use of the dynamic and adjustable Manta Ray Foraging (DAMRF) algorithm. The DAMRF algorithm harnesses the inherent flexibility of EVs as controllable loads and develops a comprehensive dispatch model for a large-scale EV response. The model takes into account the management, operational, and environmental costs associated with load fluctuations in the microgrid. Simulation evaluations conducted based on a practical microgrid environment validate the effectiveness of our wind–solar energy storage and management strategy. The results showcase significant improvements in energy and reserve minimization, highlighting the potential advantages of integrating EVs into sustainable microgrid systems. In addition, the DAMRF algorithm achieves lower environmental pollution control costs (USD 8000) compared to the costs associated with the Genetic Algorithm (GA) (USD 8654.639) and PSO (USD 8579.546), emphasizing its ability to effectively control and minimize environmental pollution. In addition, the DAMRF algorithm offers a more cost-effective solution for managing the power grid, and the shorter solution running time of the DAMRF is almost the same as PSO’s quicker decision-making and response times, enhancing the overall responsiveness and adaptability of the power grid management system.