David Ramirez-Brewer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
David Ramirez-Brewer has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Luis Alberto Garcia- Zapateiro
Research Group of Complex Fluid Engineering and Food Rheology, Universidad de Cartagena, Cartagena 130015, Colombia
6 shared publications - Somaris Elena Quintana
Research Group of Complex Fluid Engineering and Food Rheology, Universidad de Cartagena, Cartagena 130015, Colombia
3 shared publications - Jairo Useche Vivero
Universidad Tecnológica de Bolívar
1 shared publication - Jose Maria Franco
Pro2TecS—Chemical Product and Process Technology Research Center Department of Chemical Engineering and Materials Science ETSI Universidad de Huelva Campus de “El Carmen” 21071 Huelva Spain
1 shared publication - Leire Palencia-Madrid
BIOMICs Research Group, Lascaray Research Center, University of the Basque Country UPV/EHU, Vitoria-Gasteiz, Spain
1 shared publication - Luis Mieles-Gómez
Research Group of Complex Fluid Engineering and Food Rheology, Universidad de Cartagena, Cartagena 130015, Colombia
1 shared publication
Latest Publications
- Open Access
Developing Biodegradable Films from Mango (Mangifera indica) Starch and Extract: A Rheological and Physical Study
The development of biodegradable films with antioxidant properties offers a promising approach to food preservation. This study focused on creating and characterising mango starch-based films enriched with mango peel extract (MPE) at concentrations of 0, 1, and 2%, using peels from mangoes (Mangifera indica var. Corazon) at organoleptic maturity, obtained as residual byproducts (peel and seed) for active food packaging applications. An MPE extraction yield of 35.57 ± 2.74% was achieved using ultrasound-assisted extraction (UAE), confirming its rich phenolic content and antioxidant activity as a natural alternative to synthetic preservatives. Rheological analysis revealed that the films exhibited pseudoplastic behavior, with complex viscosity reducing as angular frequency increased. Incorporating MPE at concentrations up to 1% enhanced the films’ viscoelastic properties, while a 2% addition significantly altered their frequency and temperature dependence. The rheological modeling showed that the fractional Maxwell model with two springpots described the films more accurately than the generalized Maxwell model. This approach offered a clearer understanding of their viscoelastic response, especially under changes in frequency and temperature. Mechanical characterization indicated that adding MPE improved film strength while reducing solubility. Although film thickness remained unchanged, increasing MPE concentration led to greater opacity and darker coloration. These changes offer advantages in food packaging by enhancing UV protection and reducing oxidative degradation. Crucially, the incorporation of MPE significantly increased the phenolic content and antioxidant capacity of the films, as confirmed by ABTS assays. These findings strongly support the potential of MPE-based films for active packaging, providing a sustainable and functional alternative for preserving light-sensitive food products. Among the tested formulations, films with 1% MPE demonstrated the most effective balance of rheological stability, mechanical strength, and antioxidant capacity.
Open AccessDeveloping Biodegradable Films from Mango (Mangifera indica) Starch and Extract: A Rheological and Physical Study
The development of biodegradable films with antioxidant properties offers a promising approach to food preservation. This study focused on creating and characterising mango starch-based films enriched with mango peel extract (MPE) at concentrations of 0, 1, and 2%, using peels from mangoes (Mangifera indica var. Corazon) at organoleptic maturity, obtained as residual byproducts (peel and seed) for active food packaging applications. An MPE extraction yield of 35.57 ± 2.74% was achieved using ultrasound-assisted extraction (UAE), confirming its rich phenolic content and antioxidant activity as a natural alternative to synthetic preservatives. Rheological analysis revealed that the films exhibited pseudoplastic behavior, with complex viscosity reducing as angular frequency increased. Incorporating MPE at concentrations up to 1% enhanced the films’ viscoelastic properties, while a 2% addition significantly altered their frequency and temperature dependence. The rheological modeling showed that the fractional Maxwell model with two springpots described the films more accurately than the generalized Maxwell model. This approach offered a clearer understanding of their viscoelastic response, especially under changes in frequency and temperature. Mechanical characterization indicated that adding MPE improved film strength while reducing solubility. Although film thickness remained unchanged, increasing MPE concentration led to greater opacity and darker coloration. These changes offer advantages in food packaging by enhancing UV protection and reducing oxidative degradation. Crucially, the incorporation of MPE significantly increased the phenolic content and antioxidant capacity of the films, as confirmed by ABTS assays. These findings strongly support the potential of MPE-based films for active packaging, providing a sustainable and functional alternative for preserving light-sensitive food products. Among the tested formulations, films with 1% MPE demonstrated the most effective balance of rheological stability, mechanical strength, and antioxidant capacity.
- Open Access
- 30 August 2024
- Published by Enviro Research Publishers in Current Research in Nutrition and Food Science Journal
- Vol. 12 (2) , 814-823
Synthesis of Linoleic Acid of Conjugated Isomers from Sesame (Sesamum Indicum) Seed Oil: Its Use and Effect in a Microstructured Product Type Oil-in-Water Emulsion
The development of functional foods is an area of great interest and innovation in the food industry. The use of conjugated linoleic acid (CLA) in food formulations has been growing in recent years due to its multiple health benefits. In this study, conjugated linoleic acid was obtained from sesame oil, and its use in the formulation of oil-in-water food emulsions was evaluated. Conjugated linoleic acid (CLA) was synthesized from the linoleic acid present in sesame oil using the alkaline isomerization method using proplyeneglycol as a solvent. The effect of alkali concentration (NaOH) and reaction time on the conversion of linoleic acid to CLA was evaluated. A 96.6% conversion of CLA was obtained with a NaOH concentration of 7% and a reaction time of 2 h. Emulsions were prepared using CLA as oil phase and soy lecithin, tween 80, carboxymethylcellulose as emulsifying agents. Emulsions with mixtures of carboxymethylcellulose and tween 80 were stable, presenting a non-Newtonian fluid behavior of pseudoplastic type (n0.99 ), and its microstructural characterization shows a homogeneous particle distribution. These results show that the alkaline isomerization process using propylene glycol as a solvent is an excellent alternative for the synthesis of CLA from vegetable oils such as sesame oil and its application in the development of microstructured products such as functional emulsions, and their subsequent application in the development of new food products with beneficial health characteristics.
- 30 August 2024
- Published by Enviro Research Publishers in Current Research in Nutrition and Food Science Journal
- Vol. 12 (2) , 814-823
Open AccessSynthesis of Linoleic Acid of Conjugated Isomers from Sesame (Sesamum Indicum) Seed Oil: Its Use and Effect in a Microstructured Product Type Oil-in-Water Emulsion
The development of functional foods is an area of great interest and innovation in the food industry. The use of conjugated linoleic acid (CLA) in food formulations has been growing in recent years due to its multiple health benefits. In this study, conjugated linoleic acid was obtained from sesame oil, and its use in the formulation of oil-in-water food emulsions was evaluated. Conjugated linoleic acid (CLA) was synthesized from the linoleic acid present in sesame oil using the alkaline isomerization method using proplyeneglycol as a solvent. The effect of alkali concentration (NaOH) and reaction time on the conversion of linoleic acid to CLA was evaluated. A 96.6% conversion of CLA was obtained with a NaOH concentration of 7% and a reaction time of 2 h. Emulsions were prepared using CLA as oil phase and soy lecithin, tween 80, carboxymethylcellulose as emulsifying agents. Emulsions with mixtures of carboxymethylcellulose and tween 80 were stable, presenting a non-Newtonian fluid behavior of pseudoplastic type (n0.99 ), and its microstructural characterization shows a homogeneous particle distribution. These results show that the alkaline isomerization process using propylene glycol as a solvent is an excellent alternative for the synthesis of CLA from vegetable oils such as sesame oil and its application in the development of microstructured products such as functional emulsions, and their subsequent application in the development of new food products with beneficial health characteristics.
- Open Access
Applicability of the Cox–Merz Relationship for Mayonnaise Enriched with Natural Extracts
The Cox and Merz rules are empirical correlations between the apparent viscosity of polymers with the effect of shear rate and the complex dynamic viscosity with the effect of frequency. In this study, the rheological properties of mayonnaise-type emulsions enriched with Averrhoa carambola extracts were investigated using small-amplitude oscillatory shear (SAOS) and steady shear flow. The results showed that the shear-thinning behavior of the samples was non-Newtonian with yield stress and had time-dependent characteristics, as evidenced by curves from non-oscillatory measurements. It was observed that the experimental data on the complex and apparent viscosity of the samples obeyed the Cox–Merz rule.
Open AccessApplicability of the Cox–Merz Relationship for Mayonnaise Enriched with Natural Extracts
The Cox and Merz rules are empirical correlations between the apparent viscosity of polymers with the effect of shear rate and the complex dynamic viscosity with the effect of frequency. In this study, the rheological properties of mayonnaise-type emulsions enriched with Averrhoa carambola extracts were investigated using small-amplitude oscillatory shear (SAOS) and steady shear flow. The results showed that the shear-thinning behavior of the samples was non-Newtonian with yield stress and had time-dependent characteristics, as evidenced by curves from non-oscillatory measurements. It was observed that the experimental data on the complex and apparent viscosity of the samples obeyed the Cox–Merz rule.
- Open Access
Characterization and Modeling of the Viscoelastic Behavior of Hydrocolloid-Based Films Using Classical and Fractional Rheological Models
Hydrocolloid-based films are a good alternative in the development of biodegradable films due to their properties, such as non-toxicity, functionality, and biodegradability, among others. In this work, films based on hydrocolloids (gellan gum, carrageenan, and guar gum) were formulated, evaluating their dynamic rheological behavior and creep and recovery. Maxwell’s classical and fractional rheological models were implemented to describe its viscoelastic behavior, using the Vortex Search Algorithm for the estimation of the parameters. The hydrocolloid-based films showed a viscoelastic behavior, where the behavior of the storage modulus and loss modulus ( indicated a greater elastic behavior (). The Maxwell fractional model with two spring-pots showed an optimal fit of the experimental data of storage modulus () and loss modulus ( and a creep compliance (J) ( and ). This shows that fractional models are an excellent alternative for describing the dynamic rheological behavior and creep recovery of films. These results show the importance of estimating parameters that allow for the dynamic rheological and creep behaviors of hydrocolloid-based films for applications in the design of active films because they allow us to understand their behavior from a rheological point of view, which can contribute to the design and improvement of products such as food coatings, food packaging, or other applications containing biopolymers.Open AccessCharacterization and Modeling of the Viscoelastic Behavior of Hydrocolloid-Based Films Using Classical and Fractional Rheological Models
Hydrocolloid-based films are a good alternative in the development of biodegradable films due to their properties, such as non-toxicity, functionality, and biodegradability, among others. In this work, films based on hydrocolloids (gellan gum, carrageenan, and guar gum) were formulated, evaluating their dynamic rheological behavior and creep and recovery. Maxwell’s classical and fractional rheological models were implemented to describe its viscoelastic behavior, using the Vortex Search Algorithm for the estimation of the parameters. The hydrocolloid-based films showed a viscoelastic behavior, where the behavior of the storage modulus and loss modulus ( indicated a greater elastic behavior (). The Maxwell fractional model with two spring-pots showed an optimal fit of the experimental data of storage modulus () and loss modulus ( and a creep compliance (J) ( and ). This shows that fractional models are an excellent alternative for describing the dynamic rheological behavior and creep recovery of films. These results show the importance of estimating parameters that allow for the dynamic rheological and creep behaviors of hydrocolloid-based films for applications in the design of active films because they allow us to understand their behavior from a rheological point of view, which can contribute to the design and improvement of products such as food coatings, food packaging, or other applications containing biopolymers. - Open Access
- 5 February 2016
- Published by FapUNIFESP (SciELO) in Food Science and Technology
- Vol. 36 (1) , 64-69
Rheological properties of oil-in-water emulsions prepared with oil and protein isolates from sesame (Sesamum Indicum)
In this study, food emulsions of oil in water from sesame (Sesamum indicum) protein isolates and their oil were formulated and standardised. The effect of the concentrations of sesame (Sesamum indicum) protein isolates and base oil and the speed of the emulsification process for the food emulsion stability was studied. The protein isolates were achieved from the defatted sesame flour (DSF), obtaining a percentage of 80% ± 0.05% of protein. Emulsions were formulated through a factorial design 23. The rheological behaviour of sesame (Sesamum indicum) protein isolates-stabilised emulsions and microstructural composition were investigated. Stable emulsions with suitable rheological properties and microstructure were formulated at a concentration of 10% sesame oil and different concentrations of protein isolates, between 1.5% and 2.5%, with the best droplet distribution characteristics being shown for the 2.5% sesame protein isolates. The emulsions showed a non-Newtonian fluid behaviour, adjusting the Sisko model.
- 5 February 2016
- Published by FapUNIFESP (SciELO) in Food Science and Technology
- Vol. 36 (1) , 64-69
Open AccessRheological properties of oil-in-water emulsions prepared with oil and protein isolates from sesame (Sesamum Indicum)
In this study, food emulsions of oil in water from sesame (Sesamum indicum) protein isolates and their oil were formulated and standardised. The effect of the concentrations of sesame (Sesamum indicum) protein isolates and base oil and the speed of the emulsification process for the food emulsion stability was studied. The protein isolates were achieved from the defatted sesame flour (DSF), obtaining a percentage of 80% ± 0.05% of protein. Emulsions were formulated through a factorial design 23. The rheological behaviour of sesame (Sesamum indicum) protein isolates-stabilised emulsions and microstructural composition were investigated. Stable emulsions with suitable rheological properties and microstructure were formulated at a concentration of 10% sesame oil and different concentrations of protein isolates, between 1.5% and 2.5%, with the best droplet distribution characteristics being shown for the 2.5% sesame protein isolates. The emulsions showed a non-Newtonian fluid behaviour, adjusting the Sisko model.