Hao Wang
Research Subjects
Hao Wang has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Yanjie Song
School of Information Science and Technology Dalian Maritime University Dalian China
2 shared publications Zun Cai
2 shared publications- Chengshuai Zhong1 shared publication
- Chenhang Wang1 shared publication
Hongbo Wang
1 shared publicationJiadong Zhang
1 shared publication
Latest Publications
- 1 November 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (11)
Leading-edge vortex coupling and breakdown mechanisms in a wide-speed-range forebody/inlet integrated waverider
With the development of wide-speed-range air-breathing hypersonic vehicles, subsonic takeoff and landing performance has become critical. Coupling vortex lift is an effective approach to improve low-speed performance. This study designs an internal–external flow integrated waverider based on a composite flow field and investigates the vortex coupling and breakdown physics governing its subsonic lift. The waverider is spanwise divided into a fuselage–inlet section, a transition section, and a wing section. Numerical simulations confirm the expected inviscid shock-on-lip shock system, with a consistent overall shock structure under viscous conditions, providing a valid configuration for the low-speed study. At subsonic conditions, the configuration exhibits significant vortex lift, with a stall angle of 30° and a maximum lift-to-drag ratio of 4.40. The lift variation is closely linked to the coupling and breakdown of the fuselage–inlet section leading-edge vortex and the transition-section leading-edge vortex. Weak coupling occurs even at small angles of attack, and the coupling strength rises with angle of attack; the minimum pressure coefficient within the vortex region decreases by 19.8% and 23.1% relative to the pre-coupling state at 4° and 20°, respectively. Unlike a purely aerodynamic double-swept waverider, the feeding flow of the transition-section leading-edge vortex primarily comes from the upstream fuselage–inlet compression surface, driven jointly by the streamwise adverse pressure gradient and transverse pressure gradient induced by the inlet. As the angle of attack increases, bubble-type breakdown of this coupled vortex system starts from the rear, and a lift plateau forms owing to the balance between vortex lift growth and lift loss from vortex breakdown. Further increasing the angle of attack shifts vortex competition: the fuselage–inlet vortex becomes dominant, and its upstream-moving breakdown directly induces stall. These findings reveal the intrinsic link between vortex coupling, breakdown, and lift in an integrated forebody/inlet configuration.
- 1 November 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (11)
Leading-edge vortex coupling and breakdown mechanisms in a wide-speed-range forebody/inlet integrated waverider
With the development of wide-speed-range air-breathing hypersonic vehicles, subsonic takeoff and landing performance has become critical. Coupling vortex lift is an effective approach to improve low-speed performance. This study designs an internal–external flow integrated waverider based on a composite flow field and investigates the vortex coupling and breakdown physics governing its subsonic lift. The waverider is spanwise divided into a fuselage–inlet section, a transition section, and a wing section. Numerical simulations confirm the expected inviscid shock-on-lip shock system, with a consistent overall shock structure under viscous conditions, providing a valid configuration for the low-speed study. At subsonic conditions, the configuration exhibits significant vortex lift, with a stall angle of 30° and a maximum lift-to-drag ratio of 4.40. The lift variation is closely linked to the coupling and breakdown of the fuselage–inlet section leading-edge vortex and the transition-section leading-edge vortex. Weak coupling occurs even at small angles of attack, and the coupling strength rises with angle of attack; the minimum pressure coefficient within the vortex region decreases by 19.8% and 23.1% relative to the pre-coupling state at 4° and 20°, respectively. Unlike a purely aerodynamic double-swept waverider, the feeding flow of the transition-section leading-edge vortex primarily comes from the upstream fuselage–inlet compression surface, driven jointly by the streamwise adverse pressure gradient and transverse pressure gradient induced by the inlet. As the angle of attack increases, bubble-type breakdown of this coupled vortex system starts from the rear, and a lift plateau forms owing to the balance between vortex lift growth and lift loss from vortex breakdown. Further increasing the angle of attack shifts vortex competition: the fuselage–inlet vortex becomes dominant, and its upstream-moving breakdown directly induces stall. These findings reveal the intrinsic link between vortex coupling, breakdown, and lift in an integrated forebody/inlet configuration.
- 1 October 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (10)
Experimental and numerical investigation of novel passive fluidic thrust-vectoring aerospike nozzle
Passive fluidic thrust vectoring is attractive for detonation-based propulsion systems because it requires neither external gas supplies nor moving parts. This paper proposes a novel two-dimensional aerospike nozzle in which a throat-bypass passage is embedded within the central spike: the natural pressure difference across the nozzle drives a secondary jet through the passage, and its aerodynamic interference with the primary flow deflects the thrust vector. The concept is investigated through cold-flow wind tunnel experiments with schlieren diagnostics, complemented by steady compressible Reynolds-averaged Navier–Stokes simulations over nozzle pressure ratios (NPRs) of 3, 5, 10, and 15. The schlieren images provide qualitative experimental validation: with the upper bypass passage opened, the nozzle jet exhibits pronounced deflection and flow asymmetry at all tested NPRs, and a distinct Mach disk appears on the injection side at NPRs of 10 and 15, whereas the closed-bypass configuration remains symmetric. Validated against published benchmark experiments and the present schlieren images, the simulations reveal the underlying vectoring mechanism: the bypass jet deflects the throat sonic line and attenuates the Coanda-driven wall attachment, and the resulting differential expansion establishes a large-scale wall-pressure asymmetry over the thrust surface. Integrating the numerically predicted wall-pressure distributions yields normal-to-axial force ratios of 0.233, 0.431, and 0.359 at NPRs of 3, 5, and 10, respectively, corresponding to a peak vector angle of approximately 23.3° at an NPR of 5, while the axial-thrust penalty remains below 1.1% and the bypass mass flow fraction below 8%. These results demonstrate the feasibility and control efficiency of the proposed throat-bypass passive vectoring aerospike nozzle and provide a reference for passive thrust-vectoring design in future detonation engines.
- 1 October 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (10)
Experimental and numerical investigation of novel passive fluidic thrust-vectoring aerospike nozzle
Passive fluidic thrust vectoring is attractive for detonation-based propulsion systems because it requires neither external gas supplies nor moving parts. This paper proposes a novel two-dimensional aerospike nozzle in which a throat-bypass passage is embedded within the central spike: the natural pressure difference across the nozzle drives a secondary jet through the passage, and its aerodynamic interference with the primary flow deflects the thrust vector. The concept is investigated through cold-flow wind tunnel experiments with schlieren diagnostics, complemented by steady compressible Reynolds-averaged Navier–Stokes simulations over nozzle pressure ratios (NPRs) of 3, 5, 10, and 15. The schlieren images provide qualitative experimental validation: with the upper bypass passage opened, the nozzle jet exhibits pronounced deflection and flow asymmetry at all tested NPRs, and a distinct Mach disk appears on the injection side at NPRs of 10 and 15, whereas the closed-bypass configuration remains symmetric. Validated against published benchmark experiments and the present schlieren images, the simulations reveal the underlying vectoring mechanism: the bypass jet deflects the throat sonic line and attenuates the Coanda-driven wall attachment, and the resulting differential expansion establishes a large-scale wall-pressure asymmetry over the thrust surface. Integrating the numerically predicted wall-pressure distributions yields normal-to-axial force ratios of 0.233, 0.431, and 0.359 at NPRs of 3, 5, and 10, respectively, corresponding to a peak vector angle of approximately 23.3° at an NPR of 5, while the axial-thrust penalty remains below 1.1% and the bypass mass flow fraction below 8%. These results demonstrate the feasibility and control efficiency of the proposed throat-bypass passive vectoring aerospike nozzle and provide a reference for passive thrust-vectoring design in future detonation engines.
- 25 September 2026
- Published by Elsevier in Aerospace Science and Technology
- Vol. 180
Interpretable law discovery for RBCC mixing layer characteristics via physics-staged symbolic regression
- 25 September 2026
- Published by Elsevier in Aerospace Science and Technology
- Vol. 180
Interpretable law discovery for RBCC mixing layer characteristics via physics-staged symbolic regression
- 4 July 2025
- Published by Elsevier in Neurocomputing
- Vol. 650
A reinforcement learning-assisted genetic programming algorithm for team formation problem considering person-job matching
- 4 July 2025
- Published by Elsevier in Neurocomputing
- Vol. 650
A reinforcement learning-assisted genetic programming algorithm for team formation problem considering person-job matching
- 26 September 2023
- Published by Elsevier in Engineering Applications of Artificial Intelligence
- Vol. 126
An improved heterogeneous graph convolutional network for job recommendation
- 26 September 2023
- Published by Elsevier in Engineering Applications of Artificial Intelligence
- Vol. 126
An improved heterogeneous graph convolutional network for job recommendation