Honglin He
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Honglin He has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Jingxuan Yang
Tsinghua University
5 shared publications - Shuo Feng
Tsinghua University
5 shared publications - Yi Zhang
Institute of Future Human Habitats, Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China
5 shared publications - Jianming Hu
Tsinghua University
3 shared publications - Shu Li
Department of Automation, Tsinghua University, Beijing, China
3 shared publications - Haowei Sun
Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, USA
2 shared publications
Latest Publications
- 27 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 26 (12) , 22804-22817
Few-Shot Testing of Autonomous Vehicles With Scenario Similarity Learning
Testing and evaluation are critical to the development and deployment of autonomous vehicles (AVs). Given the rarity of safety-critical events such as crashes, millions of tests are typically needed to accurately assess AV safety performance. Although techniques like importance sampling can accelerate this process, it usually still requires too many tests for field testing. This severely hinders the testing and evaluation process, especially for third-party testers and governmental bodies with very limited testing budgets. The rapid development cycles of AV technology further exacerbate this challenge. To fill this research gap, this paper introduces the few-shot testing (FST) problem and proposes a methodological framework to tackle it. As the testing budget is very limited, usually smaller than 100, the FST method transforms the testing scenario generation problem from probabilistic sampling to deterministic optimization, reducing the uncertainty of testing results. To optimize the selection of testing scenarios, a cross-attention similarity mechanism is proposed to extract the information of AV’s testing scenario space. This allows iterative searches for scenarios with the smallest evaluation error, ensuring precise testing within budget constraints. Experimental results in cut-in scenarios demonstrate the effectiveness of the FST method, significantly enhancing accuracy and enabling efficient, precise AV testing.
- 27 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 26 (12) , 22804-22817
Few-Shot Testing of Autonomous Vehicles With Scenario Similarity Learning
Testing and evaluation are critical to the development and deployment of autonomous vehicles (AVs). Given the rarity of safety-critical events such as crashes, millions of tests are typically needed to accurately assess AV safety performance. Although techniques like importance sampling can accelerate this process, it usually still requires too many tests for field testing. This severely hinders the testing and evaluation process, especially for third-party testers and governmental bodies with very limited testing budgets. The rapid development cycles of AV technology further exacerbate this challenge. To fill this research gap, this paper introduces the few-shot testing (FST) problem and proposes a methodological framework to tackle it. As the testing budget is very limited, usually smaller than 100, the FST method transforms the testing scenario generation problem from probabilistic sampling to deterministic optimization, reducing the uncertainty of testing results. To optimize the selection of testing scenarios, a cross-attention similarity mechanism is proposed to extract the information of AV’s testing scenario space. This allows iterative searches for scenarios with the smallest evaluation error, ensuring precise testing within budget constraints. Experimental results in cut-in scenarios demonstrate the effectiveness of the FST method, significantly enhancing accuracy and enabling efficient, precise AV testing.
- Open Access
Few-Shot Testing of Autonomous Vehicles with Scenario Similarity Learning
Testing and evaluation are critical to the development and deployment of autonomous vehicles (AVs). Given the rarity of safety-critical events such as crashes, millions of tests are typically needed to accurately assess AV safety performance. Although techniques like importance sampling can accelerate this process, it usually still requires too many numbers of tests for field testing. This severely hinders the testing and evaluation process, especially for third-party testers and governmental bodies with very limited testing budgets. The rapid development cycles of AV technology further exacerbate this challenge. To fill this research gap, this paper introduces the few-shot testing (FST) problem and proposes a methodological framework to tackle it. As the testing budget is very limited, usually smaller than 100, the FST method transforms the testing scenario generation problem from probabilistic sampling to deterministic optimization, reducing the uncertainty of testing results. To optimize the selection of testing scenarios, a cross-attention similarity mechanism is proposed to learn to extract the information of AV's testing scenario space. This allows iterative searches for scenarios with the smallest evaluation error, ensuring precise testing within budget constraints. Experimental results in cut-in scenarios demonstrate the effectiveness of the FST method, significantly enhancing accuracy and enabling efficient, precise AV testing.
Open AccessFew-Shot Testing of Autonomous Vehicles with Scenario Similarity Learning
Testing and evaluation are critical to the development and deployment of autonomous vehicles (AVs). Given the rarity of safety-critical events such as crashes, millions of tests are typically needed to accurately assess AV safety performance. Although techniques like importance sampling can accelerate this process, it usually still requires too many numbers of tests for field testing. This severely hinders the testing and evaluation process, especially for third-party testers and governmental bodies with very limited testing budgets. The rapid development cycles of AV technology further exacerbate this challenge. To fill this research gap, this paper introduces the few-shot testing (FST) problem and proposes a methodological framework to tackle it. As the testing budget is very limited, usually smaller than 100, the FST method transforms the testing scenario generation problem from probabilistic sampling to deterministic optimization, reducing the uncertainty of testing results. To optimize the selection of testing scenarios, a cross-attention similarity mechanism is proposed to learn to extract the information of AV's testing scenario space. This allows iterative searches for scenarios with the smallest evaluation error, ensuring precise testing within budget constraints. Experimental results in cut-in scenarios demonstrate the effectiveness of the FST method, significantly enhancing accuracy and enabling efficient, precise AV testing.
- Open Access
Few-Shot Scenario Testing for Autonomous Vehicles Based on Neighborhood Coverage and Similarity
Testing and evaluating the safety performance of autonomous vehicles (AVs) is essential before the large-scale deployment. Practically, the number of testing scenarios permissible for a specific AV is severely limited by tight constraints on testing budgets and time. With the restrictions imposed by strictly restricted numbers of tests, existing testing methods often lead to significant uncertainty or difficulty to quantifying evaluation results. In this paper, we formulate this problem for the first time the "few-shot testing" (FST) problem and propose a systematic framework to address this challenge. To alleviate the considerable uncertainty inherent in a small testing scenario set, we frame the FST problem as an optimization problem and search for the testing scenario set based on neighborhood coverage and similarity. Specifically, under the guidance of better generalization ability of the testing scenario set on AVs, we dynamically adjust this set and the contribution of each testing scenario to the evaluation result based on coverage, leveraging the prior information of surrogate models (SMs). With certain hypotheses on SMs, a theoretical upper bound of evaluation error is established to verify the sufficiency of evaluation accuracy within the given limited number of tests. The experiment results on cut-in scenarios demonstrate a notable reduction in evaluation error and variance of our method compared to conventional testing methods, especially for situations with a strict limit on the number of scenarios.
Open AccessFew-Shot Scenario Testing for Autonomous Vehicles Based on Neighborhood Coverage and Similarity
Testing and evaluating the safety performance of autonomous vehicles (AVs) is essential before the large-scale deployment. Practically, the number of testing scenarios permissible for a specific AV is severely limited by tight constraints on testing budgets and time. With the restrictions imposed by strictly restricted numbers of tests, existing testing methods often lead to significant uncertainty or difficulty to quantifying evaluation results. In this paper, we formulate this problem for the first time the "few-shot testing" (FST) problem and propose a systematic framework to address this challenge. To alleviate the considerable uncertainty inherent in a small testing scenario set, we frame the FST problem as an optimization problem and search for the testing scenario set based on neighborhood coverage and similarity. Specifically, under the guidance of better generalization ability of the testing scenario set on AVs, we dynamically adjust this set and the contribution of each testing scenario to the evaluation result based on coverage, leveraging the prior information of surrogate models (SMs). With certain hypotheses on SMs, a theoretical upper bound of evaluation error is established to verify the sufficiency of evaluation accuracy within the given limited number of tests. The experiment results on cut-in scenarios demonstrate a notable reduction in evaluation error and variance of our method compared to conventional testing methods, especially for situations with a strict limit on the number of scenarios.
- 27 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 25 (2) , 1761-1773
Adaptive Safety Evaluation for Connected and Automated Vehicles With Sparse Control Variates
Safety performance evaluation is critical for developing and deploying connected and automated vehicles (CAVs). One prevailing way is to design testing scenarios using prior knowledge of CAVs, test CAVs in these scenarios, and then evaluate their safety performances. However, significant differences between CAVs and prior knowledge could severely reduce the evaluation efficiency. Towards addressing this issue, most existing studies focus on the adaptive design of testing scenarios during the CAV testing process, but so far they cannot be applied to high-dimensional scenarios. In this paper, we focus on the adaptive safety performance evaluation by leveraging the testing results, after the CAV testing process. It can significantly improve the evaluation efficiency and be applied to high-dimensional scenarios. Specifically, instead of directly evaluating the unknown quantity (e.g., crash rates) of CAV safety performances, we evaluate the differences between the unknown quantity and known quantity (i.e., control variates). By leveraging the testing results, the control variates could be well-designed and optimized such that the differences are close to zero, so the evaluation variance could be dramatically reduced for different CAVs. To handle the high-dimensional scenarios, we propose the sparse control variates method, where the control variates are designed only for the sparse and critical variables of scenarios. According to the number of critical variables in each scenario, the control variates are stratified into strata and optimized within each stratum using multiple linear regression techniques. We justify the proposed method’s effectiveness by rigorous theoretical analysis and empirical study of high-dimensional overtaking scenarios.
- 27 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 25 (2) , 1761-1773
Adaptive Safety Evaluation for Connected and Automated Vehicles With Sparse Control Variates
Safety performance evaluation is critical for developing and deploying connected and automated vehicles (CAVs). One prevailing way is to design testing scenarios using prior knowledge of CAVs, test CAVs in these scenarios, and then evaluate their safety performances. However, significant differences between CAVs and prior knowledge could severely reduce the evaluation efficiency. Towards addressing this issue, most existing studies focus on the adaptive design of testing scenarios during the CAV testing process, but so far they cannot be applied to high-dimensional scenarios. In this paper, we focus on the adaptive safety performance evaluation by leveraging the testing results, after the CAV testing process. It can significantly improve the evaluation efficiency and be applied to high-dimensional scenarios. Specifically, instead of directly evaluating the unknown quantity (e.g., crash rates) of CAV safety performances, we evaluate the differences between the unknown quantity and known quantity (i.e., control variates). By leveraging the testing results, the control variates could be well-designed and optimized such that the differences are close to zero, so the evaluation variance could be dramatically reduced for different CAVs. To handle the high-dimensional scenarios, we propose the sparse control variates method, where the control variates are designed only for the sparse and critical variables of scenarios. According to the number of critical variables in each scenario, the control variates are stratified into strata and optimized within each stratum using multiple linear regression techniques. We justify the proposed method’s effectiveness by rigorous theoretical analysis and empirical study of high-dimensional overtaking scenarios.
- Open Access
Adaptive Safety Evaluation for Connected and Automated Vehicles with Sparse Control Variates
Safety performance evaluation is critical for developing and deploying connected and automated vehicles (CAVs). One prevailing way is to design testing scenarios using prior knowledge of CAVs, test CAVs in these scenarios, and then evaluate their safety performances. However, significant differences between CAVs and prior knowledge could severely reduce the evaluation efficiency. Towards addressing this issue, most existing studies focus on the adaptive design of testing scenarios during the CAV testing process, but so far they cannot be applied to high-dimensional scenarios. In this paper, we focus on the adaptive safety performance evaluation by leveraging the testing results, after the CAV testing process. It can significantly improve the evaluation efficiency and be applied to high-dimensional scenarios. Specifically, instead of directly evaluating the unknown quantity (e.g., crash rates) of CAV safety performances, we evaluate the differences between the unknown quantity and known quantity (i.e., control variates). By leveraging the testing results, the control variates could be well designed and optimized such that the differences are close to zero, so the evaluation variance could be dramatically reduced for different CAVs. To handle the high-dimensional scenarios, we propose the sparse control variates method, where the control variates are designed only for the sparse and critical variables of scenarios. According to the number of critical variables in each scenario, the control variates are stratified into strata and optimized within each stratum using multiple linear regression techniques. We justify the proposed method's effectiveness by rigorous theoretical analysis and empirical study of high-dimensional overtaking scenarios.
Open AccessAdaptive Safety Evaluation for Connected and Automated Vehicles with Sparse Control Variates
Safety performance evaluation is critical for developing and deploying connected and automated vehicles (CAVs). One prevailing way is to design testing scenarios using prior knowledge of CAVs, test CAVs in these scenarios, and then evaluate their safety performances. However, significant differences between CAVs and prior knowledge could severely reduce the evaluation efficiency. Towards addressing this issue, most existing studies focus on the adaptive design of testing scenarios during the CAV testing process, but so far they cannot be applied to high-dimensional scenarios. In this paper, we focus on the adaptive safety performance evaluation by leveraging the testing results, after the CAV testing process. It can significantly improve the evaluation efficiency and be applied to high-dimensional scenarios. Specifically, instead of directly evaluating the unknown quantity (e.g., crash rates) of CAV safety performances, we evaluate the differences between the unknown quantity and known quantity (i.e., control variates). By leveraging the testing results, the control variates could be well designed and optimized such that the differences are close to zero, so the evaluation variance could be dramatically reduced for different CAVs. To handle the high-dimensional scenarios, we propose the sparse control variates method, where the control variates are designed only for the sparse and critical variables of scenarios. According to the number of critical variables in each scenario, the control variates are stratified into strata and optimized within each stratum using multiple linear regression techniques. We justify the proposed method's effectiveness by rigorous theoretical analysis and empirical study of high-dimensional overtaking scenarios.