Felix Krämer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Felix Krämer has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Frank Breher
Institute of Inorganic Chemistry, Karlsruhe Institute of Technology (KIT), Engesserstr. 15, 76131 Karlsruhe, Germany
12 shared publications - Israel Fernández
Universidad Complutense de Madrid
10 shared publications - Robert E. Mulvey
Department of Pure and Applied Chemistry University of Strathclyde Glasgow G1 1XL UK
5 shared publications - Jan Paradies
Department of Chemistry and Center for Sustainable Systems Design Paderborn University Paderborn Germany
3 shared publications Michelle H. Crabbe
Department of Pure and Applied Chemistry University of Strathclyde Glasgow G1 1XL UK
3 shared publications- Alan James Kennedy
Department of Pure and Applied Chemistry, University of Strathclyde, Glasgow, G1 1RX, UK
2 shared publications
Latest Publications
- Open Access
- 20 January 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (9) , e23460
Boosting the Nucleophilicity of the Diphenylphosphide Anion with Crown Ether Supported Heavy Alkali Metals to Facilitate Highly Efficient Catalytic Alkene Isomerisation
Caesium and rubidium have long experienced an interest drought in organoelement chemistry in comparison to the vast ocean of applications accomplished mainly by lithium and to a lesser extent, by sodium and potassium in this field. Here, we report a breakthrough study in catalytic alkene isomerisation using crown ether‐supported alkali metal phosphides in which the activity increases sequentially and significantly as Group One is descended with Cs(18‐crown‐6)PPh 2 performing best even at 1 mol% loadings with high turnover frequencies (TOFs) and good functional group tolerance. Elevating its profile further, Cs(18‐crown‐6)PPh 2 is also successful in a stepwise double catalysis on combining alkene isomerisation with its newly established hydrophosphination (HP) capacity to access challenging to make Markovnikov products. This remote functionalisation approach was also applied to alkynes with terminal alkynes preferentially producing allenes over internal alkynes in one‐pot reactions and then under HP, generating highly functionalised vinyl phosphines. Kinetic studies and DFT calculations have also been performed to shed light on mechanistic aspects of the Cs‐mediated isomerisation of model alkene allylbenzene.
- 20 January 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (9) , e23460
Open AccessBoosting the Nucleophilicity of the Diphenylphosphide Anion with Crown Ether Supported Heavy Alkali Metals to Facilitate Highly Efficient Catalytic Alkene Isomerisation
Caesium and rubidium have long experienced an interest drought in organoelement chemistry in comparison to the vast ocean of applications accomplished mainly by lithium and to a lesser extent, by sodium and potassium in this field. Here, we report a breakthrough study in catalytic alkene isomerisation using crown ether‐supported alkali metal phosphides in which the activity increases sequentially and significantly as Group One is descended with Cs(18‐crown‐6)PPh 2 performing best even at 1 mol% loadings with high turnover frequencies (TOFs) and good functional group tolerance. Elevating its profile further, Cs(18‐crown‐6)PPh 2 is also successful in a stepwise double catalysis on combining alkene isomerisation with its newly established hydrophosphination (HP) capacity to access challenging to make Markovnikov products. This remote functionalisation approach was also applied to alkynes with terminal alkynes preferentially producing allenes over internal alkynes in one‐pot reactions and then under HP, generating highly functionalised vinyl phosphines. Kinetic studies and DFT calculations have also been performed to shed light on mechanistic aspects of the Cs‐mediated isomerisation of model alkene allylbenzene.
- Open Access
- 9 December 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (4) , 1215-1219
A palladium inverse crown: synthesis and characterisation
Inverse Crowned! We report a unique inverse crown complex. Its spectacular 12-triangular star structure has a 12-atom Pd–P host ring trapping a PhP 2− dianion guest balanced by two Cs + ions supported by 18-crown-6 donor ligands (cations not shown).
- 9 December 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (4) , 1215-1219
Open AccessA palladium inverse crown: synthesis and characterisation
Inverse Crowned! We report a unique inverse crown complex. Its spectacular 12-triangular star structure has a 12-atom Pd–P host ring trapping a PhP 2− dianion guest balanced by two Cs + ions supported by 18-crown-6 donor ligands (cations not shown).
- Open Access
- 10 September 2025
- Published by Wiley in Angewandte Chemie
- Vol. 137 (44)
Heavyweight Champion: Caesium Diorganophosphides Outperform Lighter Congeners in the Catalytic Hydrophosphination of Alkenes and Alkynes
We present a study of the ability of our recently reported well‐defined crown ether‐coordinated alkali metal phosphides 1 AM to catalyze hydrophosphination (HP) of alkynes and alkenes. In a comparative study including reaction monitoring by 1 H NMR spectroscopy, we show that the activity of caesium compound 1 Cs greatly exceeds that of its lighter congeners, enabling us to solve some reported challenges of catalytic hydrophosphination. Through the rarely used application of dialkyl phosphines, we were able to produce trialkyl phosphines from HP of styrene derivatives and activated as well as non‐activated alkynes by catalytic HP with n Bu 2 PH and t Bu 2 PH. Using t BuPhPH, P‐chiral products were obtained, still in racemic mixtures showcasing this system's potential. We also proved the method is suited for preparing unsymmetrical ethylene‐bridged bisphosphines by HP of Ph 2 P(vinyl) isolable in high yields. These advances hint that well‐defined organocaesium compounds could make a long‐term impact in chemistry.
- 10 September 2025
- Published by Wiley in Angewandte Chemie
- Vol. 137 (44)
Open AccessHeavyweight Champion: Caesium Diorganophosphides Outperform Lighter Congeners in the Catalytic Hydrophosphination of Alkenes and Alkynes
We present a study of the ability of our recently reported well‐defined crown ether‐coordinated alkali metal phosphides 1 AM to catalyze hydrophosphination (HP) of alkynes and alkenes. In a comparative study including reaction monitoring by 1 H NMR spectroscopy, we show that the activity of caesium compound 1 Cs greatly exceeds that of its lighter congeners, enabling us to solve some reported challenges of catalytic hydrophosphination. Through the rarely used application of dialkyl phosphines, we were able to produce trialkyl phosphines from HP of styrene derivatives and activated as well as non‐activated alkynes by catalytic HP with n Bu 2 PH and t Bu 2 PH. Using t BuPhPH, P‐chiral products were obtained, still in racemic mixtures showcasing this system's potential. We also proved the method is suited for preparing unsymmetrical ethylene‐bridged bisphosphines by HP of Ph 2 P(vinyl) isolable in high yields. These advances hint that well‐defined organocaesium compounds could make a long‐term impact in chemistry.
- Open Access
- 10 September 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (44) , e202516376
Heavyweight Champion: Caesium Diorganophosphides Outperform Lighter Congeners in the Catalytic Hydrophosphination of Alkenes and Alkynes
We present a study of the ability of our recently reported well‐defined crown ether‐coordinated alkali metal phosphides 1 AM to catalyze hydrophosphination (HP) of alkynes and alkenes. In a comparative study including reaction monitoring by 1 H NMR spectroscopy, we show that the activity of caesium compound 1 Cs greatly exceeds that of its lighter congeners, enabling us to solve some reported challenges of catalytic hydrophosphination. Through the rarely used application of dialkyl phosphines, we were able to produce trialkyl phosphines from HP of styrene derivatives and activated as well as non‐activated alkynes by catalytic HP with n Bu 2 PH and t Bu 2 PH. Using t BuPhPH, P‐chiral products were obtained, still in racemic mixtures showcasing this system's potential. We also proved the method is suited for preparing unsymmetrical ethylene‐bridged bisphosphines by HP of Ph 2 P(vinyl) isolable in high yields. These advances hint that well‐defined organocaesium compounds could make a long‐term impact in chemistry.
- 10 September 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (44) , e202516376
Open AccessHeavyweight Champion: Caesium Diorganophosphides Outperform Lighter Congeners in the Catalytic Hydrophosphination of Alkenes and Alkynes
We present a study of the ability of our recently reported well‐defined crown ether‐coordinated alkali metal phosphides 1 AM to catalyze hydrophosphination (HP) of alkynes and alkenes. In a comparative study including reaction monitoring by 1 H NMR spectroscopy, we show that the activity of caesium compound 1 Cs greatly exceeds that of its lighter congeners, enabling us to solve some reported challenges of catalytic hydrophosphination. Through the rarely used application of dialkyl phosphines, we were able to produce trialkyl phosphines from HP of styrene derivatives and activated as well as non‐activated alkynes by catalytic HP with n Bu 2 PH and t Bu 2 PH. Using t BuPhPH, P‐chiral products were obtained, still in racemic mixtures showcasing this system's potential. We also proved the method is suited for preparing unsymmetrical ethylene‐bridged bisphosphines by HP of Ph 2 P(vinyl) isolable in high yields. These advances hint that well‐defined organocaesium compounds could make a long‐term impact in chemistry.
- Open Access
- 3 August 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 31 (51) , e02127
Crown Ether Supported Alkali Metal Phosphides: Synthesis, Structures and Bonding
Herein we present the synthesis and full characterization of the previously unpresented lithium diphenyl phosphides Li(15‐crown‐5)PPh2 (1Li) and Li(12‐crown‐4)PPh2 (2Li) as well as the heavy homologues Rb(18‐crown‐6)PPh2 (1Rb) and Cs(18‐crown‐6)PPh2 (1Cs). We thus complete the series of crown ether coordinated alkali metal diphenyl phosphides and reveal that the structural diversity increases upon descending the group. Including the previously reported Na and K derivatives, we performed a detailed study of the title compounds in solution that strongly indicated all of them are monomers with an alkali metal phosphide AM–P interaction. We further investigated the influence of the phosphorus‐bound substituents on the bond between the Cs(18‐crown‐6) and the phosphide fragment. For this purpose, we synthesized and characterized two new cesium phosphides, alkyl‐aryl Cs(18‐crown‐6)PtBuPh (4Cs) and bis‐alkyl Cs(18‐crown‐6)PtBu2 (5Cs). We observed here that the heavy alkali metals Rb and Cs favor coordination via π‐arene interactions over the P donor dative interactions. Finally, we used state‐of‐the‐art quantum chemical methods to analyze the bonding situation in the title series of compounds.
- 3 August 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 31 (51) , e02127
Open AccessCrown Ether Supported Alkali Metal Phosphides: Synthesis, Structures and Bonding
Herein we present the synthesis and full characterization of the previously unpresented lithium diphenyl phosphides Li(15‐crown‐5)PPh2 (1Li) and Li(12‐crown‐4)PPh2 (2Li) as well as the heavy homologues Rb(18‐crown‐6)PPh2 (1Rb) and Cs(18‐crown‐6)PPh2 (1Cs). We thus complete the series of crown ether coordinated alkali metal diphenyl phosphides and reveal that the structural diversity increases upon descending the group. Including the previously reported Na and K derivatives, we performed a detailed study of the title compounds in solution that strongly indicated all of them are monomers with an alkali metal phosphide AM–P interaction. We further investigated the influence of the phosphorus‐bound substituents on the bond between the Cs(18‐crown‐6) and the phosphide fragment. For this purpose, we synthesized and characterized two new cesium phosphides, alkyl‐aryl Cs(18‐crown‐6)PtBuPh (4Cs) and bis‐alkyl Cs(18‐crown‐6)PtBu2 (5Cs). We observed here that the heavy alkali metals Rb and Cs favor coordination via π‐arene interactions over the P donor dative interactions. Finally, we used state‐of‐the‐art quantum chemical methods to analyze the bonding situation in the title series of compounds.
- Open Access
- 21 May 2025
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 28 (16)
Stabilities and Limitations in the Reactivity of Phosphorus Ylide‐Based Aluminum– and Gallium–Carbon Ambiphiles: A Combined Experimental and Computational Approach
The unexpected reactivity and stability limits of phosphorus ylide‐based aluminum– and gallium–carbon ambiphiles are described. While the previously published t‐butyl‐substituted compound (2‐{AltBu2}‐C6H4)Ph2PCMe2 (1tBu) reacts reversibly with NH3 at room temperature (RT) with cleavage of a NH bond, the reaction with MeNH2 is much less favorable and proceeds irreversibly only at 90 °C. All other title compounds 1R with R = Me, Et, Mes, and C6F5 decompose in the presence of NH3. The decomposition of 1Et in the presence of ammonia can be well followed by nuclear magnetic resonance (NMR) spectroscopy. All title compounds remain stable in the presence of t‐BuNH2 and Et2NH. In addition, an unexpected reactivity is found in the reaction of 1R and the gallium analogues 2R with isocyanates. Instead of yielding the expected ring‐expansion products, the title compounds catalyze the trimerization of isocyanates. Also the reactivity toward MeOH and H2O is presented. Quantum chemical calculations show that activation of the OH bonds should be feasible at RT. Experimental findings, however, only show the decomposition of 1tBu in the corresponding reactions. Nevertheless, the cleavage of the OH bond is feasible and affords the activation products 7 and 8 starting from the ammonia activation product 3.
- 21 May 2025
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 28 (16)
Open AccessStabilities and Limitations in the Reactivity of Phosphorus Ylide‐Based Aluminum– and Gallium–Carbon Ambiphiles: A Combined Experimental and Computational Approach
The unexpected reactivity and stability limits of phosphorus ylide‐based aluminum– and gallium–carbon ambiphiles are described. While the previously published t‐butyl‐substituted compound (2‐{AltBu2}‐C6H4)Ph2PCMe2 (1tBu) reacts reversibly with NH3 at room temperature (RT) with cleavage of a NH bond, the reaction with MeNH2 is much less favorable and proceeds irreversibly only at 90 °C. All other title compounds 1R with R = Me, Et, Mes, and C6F5 decompose in the presence of NH3. The decomposition of 1Et in the presence of ammonia can be well followed by nuclear magnetic resonance (NMR) spectroscopy. All title compounds remain stable in the presence of t‐BuNH2 and Et2NH. In addition, an unexpected reactivity is found in the reaction of 1R and the gallium analogues 2R with isocyanates. Instead of yielding the expected ring‐expansion products, the title compounds catalyze the trimerization of isocyanates. Also the reactivity toward MeOH and H2O is presented. Quantum chemical calculations show that activation of the OH bonds should be feasible at RT. Experimental findings, however, only show the decomposition of 1tBu in the corresponding reactions. Nevertheless, the cleavage of the OH bond is feasible and affords the activation products 7 and 8 starting from the ammonia activation product 3.
- 17 July 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (34)
Aluminium in der Chemie der Frustrierten Lewis‐Paare
Dieser Übersichtsartikel beschreibt die Entwicklung der Verwendung von Aluminiumverbindungen in der Chemie der frustrierten Lewis‐Paare (FLPs) in den letzten 14 Jahren. Es werden die Synthese, die Reaktivität und die katalytischen Anwendungen von intermolekularen, intramolekularen und sogenannten versteckten FLPs mit Phosphor‐, Stickstoff‐ und Kohlenstoff‐Lewis‐Basen erörtert. Die intrinsisch höhere Acidität von Aluminiumverbindungen im Vergleich zu ihren Bor‐Analoga eröffnet unterschiedliche Reaktionswege. Die Ergebnisse werden in einer mehr oder weniger chronologischen Reihenfolge präsentiert. Es wird gezeigt, dass Al‐FLPs mit einer Vielzahl von polaren und unpolaren Substraten reagieren und sowohl stabile Addukte bilden als auch reversibel Bindungen aktivieren. Folglich werden einige katalytische Anwendungen der Titelverbindungen vorgestellt, wie z. B. die Dimerisierung von Alkinen, die Hydrierung von tert‐butylethylen und Iminen, die Aktivierung von C−F‐Bindungen, die Reduktion von CO2, die Dehydrierung von Aminboran und der Transfer von Ammoniak. Darüber hinaus wurden verschiedene Al‐FLPs als Initiatoren in Polymerisationsreaktionen eingesetzt.
- 17 July 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (34)
Aluminium in der Chemie der Frustrierten Lewis‐Paare
Dieser Übersichtsartikel beschreibt die Entwicklung der Verwendung von Aluminiumverbindungen in der Chemie der frustrierten Lewis‐Paare (FLPs) in den letzten 14 Jahren. Es werden die Synthese, die Reaktivität und die katalytischen Anwendungen von intermolekularen, intramolekularen und sogenannten versteckten FLPs mit Phosphor‐, Stickstoff‐ und Kohlenstoff‐Lewis‐Basen erörtert. Die intrinsisch höhere Acidität von Aluminiumverbindungen im Vergleich zu ihren Bor‐Analoga eröffnet unterschiedliche Reaktionswege. Die Ergebnisse werden in einer mehr oder weniger chronologischen Reihenfolge präsentiert. Es wird gezeigt, dass Al‐FLPs mit einer Vielzahl von polaren und unpolaren Substraten reagieren und sowohl stabile Addukte bilden als auch reversibel Bindungen aktivieren. Folglich werden einige katalytische Anwendungen der Titelverbindungen vorgestellt, wie z. B. die Dimerisierung von Alkinen, die Hydrierung von tert‐butylethylen und Iminen, die Aktivierung von C−F‐Bindungen, die Reduktion von CO2, die Dehydrierung von Aminboran und der Transfer von Ammoniak. Darüber hinaus wurden verschiedene Al‐FLPs als Initiatoren in Polymerisationsreaktionen eingesetzt.
- 17 July 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (34) , e202405207
Aluminum in Frustrated Lewis Pair Chemistry
This review article describes the development of the use of aluminum compounds in the chemistry of frustrated Lewis pairs (FLPs) over the last 14 years. It also discusses the synthesis, reactivity and catalytic applications of intermolecular, intramolecular and so‐called hidden FLPs with phosphorus, nitrogen and carbon Lewis bases. The intrinsically higher acidity of aluminum compounds compared to their boron analogs opens up different reaction pathways. The results are presented in a more or less chronological order. It is shown that Al FLPs react with a variety of polar and non‐polar substrates and form both stable adducts and reversibly activate bonds. Consequently, some catalytic applications of the title compounds were presented such as dimerization of alkynes, hydrogenation of tert‐butyl ethylene and imines, C−F bond activation, reduction of CO2, dehydrogenation of amine borane and transfer of ammonia. In addition, various Al FLPs were used as initiators in polymerization reactions.
- 17 July 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (34) , e202405207
Aluminum in Frustrated Lewis Pair Chemistry
This review article describes the development of the use of aluminum compounds in the chemistry of frustrated Lewis pairs (FLPs) over the last 14 years. It also discusses the synthesis, reactivity and catalytic applications of intermolecular, intramolecular and so‐called hidden FLPs with phosphorus, nitrogen and carbon Lewis bases. The intrinsically higher acidity of aluminum compounds compared to their boron analogs opens up different reaction pathways. The results are presented in a more or less chronological order. It is shown that Al FLPs react with a variety of polar and non‐polar substrates and form both stable adducts and reversibly activate bonds. Consequently, some catalytic applications of the title compounds were presented such as dimerization of alkynes, hydrogenation of tert‐butyl ethylene and imines, C−F bond activation, reduction of CO2, dehydrogenation of amine borane and transfer of ammonia. In addition, various Al FLPs were used as initiators in polymerization reactions.
- Open Access
- 7 June 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (36) , e202400781
Structure and Solution Behavior of Rare‐Earth‐Metal Complexes with Tripodal N‐Donor Ligands
We report the synthesis of multiple rare-earth-metal complexes (Ln = Y, La, Ce, Sm, Lu) using tripodal N-donor ligands, which offer the key advantage of featuring only C, H, O and N elements, facilitating incineration to recover the metal. The structural properties of the Ln3+ complexes were investigated by X-ray diffraction, revealing that the ligands form complexes with a 1:1 ligand-to-metal ratio, with two of the three triflate anions coordinated to the metal centers in all cases. The coordination of the third triflate anion was found to be variable, as supported by various NMR spectroscopic investigations. Additionally, transitioning from the previously reported tris(hydrazonyl)thiophosphanyl (SP)-based ligand system to the herein reported tris(2-aminoethyl) amine (tren)-anchored ligand system enhanced flexibility, resulting in improved encapsulation of the lanthanide ions. Competition studies between the two systems revealed selective coordination of the lutetium ion with the more flexible system. Thus, enhancing the flexibility of the ligand systems used for extraction has the potential to increase their efficiency.
- 7 June 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (36) , e202400781
Open AccessStructure and Solution Behavior of Rare‐Earth‐Metal Complexes with Tripodal N‐Donor Ligands
We report the synthesis of multiple rare-earth-metal complexes (Ln = Y, La, Ce, Sm, Lu) using tripodal N-donor ligands, which offer the key advantage of featuring only C, H, O and N elements, facilitating incineration to recover the metal. The structural properties of the Ln3+ complexes were investigated by X-ray diffraction, revealing that the ligands form complexes with a 1:1 ligand-to-metal ratio, with two of the three triflate anions coordinated to the metal centers in all cases. The coordination of the third triflate anion was found to be variable, as supported by various NMR spectroscopic investigations. Additionally, transitioning from the previously reported tris(hydrazonyl)thiophosphanyl (SP)-based ligand system to the herein reported tris(2-aminoethyl) amine (tren)-anchored ligand system enhanced flexibility, resulting in improved encapsulation of the lanthanide ions. Competition studies between the two systems revealed selective coordination of the lutetium ion with the more flexible system. Thus, enhancing the flexibility of the ligand systems used for extraction has the potential to increase their efficiency.