Alican Topaloğlu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Alican Topaloğlu has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Zeynep Petek Çakar
Department of Molecular Biology and Genetics, Istanbul Technical University
12 shared publications Can Holyavkin
Istanbul Technical University Faculty of Science and Letters, Department of Molecular Biology and Genetics Maslak, Istanbul 34469
5 shared publications- Mevlüt Arslan
Department of Molecular Biology and Genetics, Faculty of Science & Letters, Istanbul Technical University, 34469 Istanbul, Türkiye
5 shared publications - Can Holyavkin
Department of Molecular Biology and Genetics, Faculty of Science & Letters, Istanbul Technical University, 34469 Istanbul, Türkiye
3 shared publications Ceren Alkım
Department of Molecular Biology & Genetics, Faculty of Science & Letters, Istanbul Technical University, Istanbul, Turkey
3 shared publications- Halil Ibrahim Kisakesen
Istanbul Teknik Üniversitesi
3 shared publications
Latest Publications
- Open Access
- 19 November 2025
- Published by MDPI AG in Fermentation
- Vol. 11 (11) , 652
Evolutionary Engineering and Molecular Characterization of a Sulfur Dioxide-Stress-Resistant Saccharomyces cerevisiae Strain
Sulfiting agents are common preservatives in the food and beverage industry to inhibit spoilage microorganisms. Sulfite produced by the dissolution of sulfur dioxide (SO2) in water is used as a microbial inhibitor and antioxidant during winemaking. Thus, sulfite resistance is a desirable trait for wine yeasts. However, consumer health concerns regarding SO2 exposure require a better understanding of the molecular basis of sulfite resistance/response. In this study, we have developed a highly SO2-stress-resistant Saccharomyces cerevisiae strain (F3) using evolutionary engineering by repeated batch selection at gradually increased potassium metabisulfite (K2S2O5) levels. F3 was resistant to 1.1 mM K2S2O5 stress, which was strongly inhibitory to the reference strain, and cross-resistant to oxidative, heat, and freeze–thaw stresses. F3 also had enhanced cell wall integrity and altered carbon metabolism, indicating its potential for industrial applications, including winemaking. Comparative whole genome sequencing revealed point mutations in SSU1 and FZF1 that are related to SO2 transport; ATG14, related to autophagy; and other genes involved in vacuolar protein sorting. Comparative transcriptomic analysis showed significant upregulation of SSU1 and differential expression of genes related to transport and carbohydrate metabolism. These findings may shed light on the molecular mechanisms contributing to SO2 resistance and industrial robustness in S. cerevisiae.
- 19 November 2025
- Published by MDPI AG in Fermentation
- Vol. 11 (11) , 652
Open AccessEvolutionary Engineering and Molecular Characterization of a Sulfur Dioxide-Stress-Resistant Saccharomyces cerevisiae Strain
Sulfiting agents are common preservatives in the food and beverage industry to inhibit spoilage microorganisms. Sulfite produced by the dissolution of sulfur dioxide (SO2) in water is used as a microbial inhibitor and antioxidant during winemaking. Thus, sulfite resistance is a desirable trait for wine yeasts. However, consumer health concerns regarding SO2 exposure require a better understanding of the molecular basis of sulfite resistance/response. In this study, we have developed a highly SO2-stress-resistant Saccharomyces cerevisiae strain (F3) using evolutionary engineering by repeated batch selection at gradually increased potassium metabisulfite (K2S2O5) levels. F3 was resistant to 1.1 mM K2S2O5 stress, which was strongly inhibitory to the reference strain, and cross-resistant to oxidative, heat, and freeze–thaw stresses. F3 also had enhanced cell wall integrity and altered carbon metabolism, indicating its potential for industrial applications, including winemaking. Comparative whole genome sequencing revealed point mutations in SSU1 and FZF1 that are related to SO2 transport; ATG14, related to autophagy; and other genes involved in vacuolar protein sorting. Comparative transcriptomic analysis showed significant upregulation of SSU1 and differential expression of genes related to transport and carbohydrate metabolism. These findings may shed light on the molecular mechanisms contributing to SO2 resistance and industrial robustness in S. cerevisiae.
- Open Access
- 30 January 2025
- Published by Oxford University Press (OUP) in FEMS Yeast Research
- Vol. 25
Evolutionary engineering and molecular characterization of an antimycin A-resistant Saccharomyces cerevisiae strain: the key role of pleiotropic drug resistance ( PDR1 )
Antimycin A, an antifungal agent that inhibits mitochondrial respiration, provides a useful model for studying resistance mechanisms. Antifungal resistance is an escalating clinical concern with limited treatment options available. To understand the molecular mechanisms of antimycin A resistance, a genetically stable, antimycin A-resistant Saccharomyces cerevisiae strain was successfully developed for the first time through an evolutionary engineering strategy, based on long-term systematic application of gradually increasing antimycin A stress in repetitive batch cultures without prior chemical mutagenesis. Comparative whole genome resequencing analysis of the evolved strain ant905-9 revealed two missense mutations in PDR1 and PRP8 genes involved in pleiotropic drug resistance and RNA splicing, respectively. Using CRISPR/Cas9 genome editing tools, the identified mutations were introduced individually and together into the reference strain, and it was confirmed that the Pdr1p.M732R mutation alone confers antimycin A-resistance in S. cerevisiae. Comparative transcriptomic analysis of the reverse-engineered Pdr1p.M732R strain showed alterations in PDR (pleiotropic drug resistance), transmembrane transport, vesicular trafficking, and autophagy pathways. Our results highlight the potential key role of PDR1 in antifungal drug resistance. This study provides new insights into mitochondrial drug resistance and the adaptive potential of yeast under respiratory stress.
- 30 January 2025
- Published by Oxford University Press (OUP) in FEMS Yeast Research
- Vol. 25
Open AccessEvolutionary engineering and molecular characterization of an antimycin A-resistant Saccharomyces cerevisiae strain: the key role of pleiotropic drug resistance ( PDR1 )
Antimycin A, an antifungal agent that inhibits mitochondrial respiration, provides a useful model for studying resistance mechanisms. Antifungal resistance is an escalating clinical concern with limited treatment options available. To understand the molecular mechanisms of antimycin A resistance, a genetically stable, antimycin A-resistant Saccharomyces cerevisiae strain was successfully developed for the first time through an evolutionary engineering strategy, based on long-term systematic application of gradually increasing antimycin A stress in repetitive batch cultures without prior chemical mutagenesis. Comparative whole genome resequencing analysis of the evolved strain ant905-9 revealed two missense mutations in PDR1 and PRP8 genes involved in pleiotropic drug resistance and RNA splicing, respectively. Using CRISPR/Cas9 genome editing tools, the identified mutations were introduced individually and together into the reference strain, and it was confirmed that the Pdr1p.M732R mutation alone confers antimycin A-resistance in S. cerevisiae. Comparative transcriptomic analysis of the reverse-engineered Pdr1p.M732R strain showed alterations in PDR (pleiotropic drug resistance), transmembrane transport, vesicular trafficking, and autophagy pathways. Our results highlight the potential key role of PDR1 in antifungal drug resistance. This study provides new insights into mitochondrial drug resistance and the adaptive potential of yeast under respiratory stress.
- Open Access
- 22 January 2025
- Published by MDPI AG in Fermentation
- Vol. 11 (2) , 47
Molecular Characterization of Propolis-Resistant Saccharomyces cerevisiae Obtained by Evolutionary Engineering
Propolis is a highly complex, resinous natural product collected by honeybees from tree leaves and buds and mixed with pollen and enzymes. Due to its antimicrobial properties, it has various medical and industrial applications. As a nonconventional strategy, the use of propolis was suggested to control contaminating yeast growth in ethanol fermentations, without significantly affecting the starter yeast of the fermentation, Saccharomyces cerevisiae. In this study, we have developed a highly propolis-resistant S. cerevisiae strain using evolutionary engineering. The evolved strain FD11 had a higher growth rate (µmax = 0.21 h−1) than the reference strain (µmax = 0.17 h−1) under propolis stress and showed cross-resistance against caffeine stress. Moreover, it had significantly lower reactive oxygen species levels and higher cell wall integrity than the reference strain. Comparative transcriptomic analysis results revealed that the genes involved in oxidoreductase activity, transmembrane transporter activity, unfolded protein binding and pleiotropic drug resistance were upregulated in FD11. Whole genome re-sequencing analysis revealed mutations in multiple genes including PDR1, encoding a transcription factor regulating pleiotropic drug response. The results imply the importance of pleiotropic drug response and cell wall integrity in propolis resistance and the potential of using propolis-resistant, robust yeast strains in industrial applications.
- 22 January 2025
- Published by MDPI AG in Fermentation
- Vol. 11 (2) , 47
Open AccessMolecular Characterization of Propolis-Resistant Saccharomyces cerevisiae Obtained by Evolutionary Engineering
Propolis is a highly complex, resinous natural product collected by honeybees from tree leaves and buds and mixed with pollen and enzymes. Due to its antimicrobial properties, it has various medical and industrial applications. As a nonconventional strategy, the use of propolis was suggested to control contaminating yeast growth in ethanol fermentations, without significantly affecting the starter yeast of the fermentation, Saccharomyces cerevisiae. In this study, we have developed a highly propolis-resistant S. cerevisiae strain using evolutionary engineering. The evolved strain FD11 had a higher growth rate (µmax = 0.21 h−1) than the reference strain (µmax = 0.17 h−1) under propolis stress and showed cross-resistance against caffeine stress. Moreover, it had significantly lower reactive oxygen species levels and higher cell wall integrity than the reference strain. Comparative transcriptomic analysis results revealed that the genes involved in oxidoreductase activity, transmembrane transporter activity, unfolded protein binding and pleiotropic drug resistance were upregulated in FD11. Whole genome re-sequencing analysis revealed mutations in multiple genes including PDR1, encoding a transcription factor regulating pleiotropic drug response. The results imply the importance of pleiotropic drug response and cell wall integrity in propolis resistance and the potential of using propolis-resistant, robust yeast strains in industrial applications.
- Open Access
Transcriptomic and Physiological Meta-Analysis of Multiple Stress-Resistant Saccharomyces cerevisiae Strains
Meta-analysis is a beneficial approach to reevaluating the outcomes of independent previous studies in the same scope. Saccharomyces cerevisiae, or the baker’s yeast, is a commonly used unicellular and eukaryotic model organism. In this study, 12 evolved S. cerevisiae strains that became resistant to diverse stress conditions (boron, caffeine, caloric restriction, cobalt, coniferyl aldehyde, ethanol, iron, nickel, oxidative stress, 2-phenylethanol, and silver stress) by adaptive laboratory evolution were reassessed to reveal the correlated stress/stressor clusters based on their transcriptomic and stress–cross-resistance data. Principal Component Analysis (PCA) with k-means clustering was performed. Five clusters for the transcriptomic data of strains and six clusters for cross-resistance stressors were identified. Through statistical evaluations, critical genes pertinent to each cluster were elucidated. The pathways associated with these genes were investigated using the KEGG database. The findings demonstrated that caffeine and coniferyl aldehyde stressors exhibit clear distinctions from other stressors in terms of both physiological stress-cross-resistance responses and transcriptomic profiles. Pathway analysis showed that ribosome biogenesis was downregulated, and starch and sucrose metabolism was upregulated across all clusters. Gene and pathway analyses have shown that stressors lead to distinct changes in yeast gene expression, and these alterations have been systematically documented for each cluster. Several of the highlighted genes are pivotal for further exploration and could potentially clarify new aspects of stress response mechanisms and multiple stress resistance in yeast.
Open AccessTranscriptomic and Physiological Meta-Analysis of Multiple Stress-Resistant Saccharomyces cerevisiae Strains
Meta-analysis is a beneficial approach to reevaluating the outcomes of independent previous studies in the same scope. Saccharomyces cerevisiae, or the baker’s yeast, is a commonly used unicellular and eukaryotic model organism. In this study, 12 evolved S. cerevisiae strains that became resistant to diverse stress conditions (boron, caffeine, caloric restriction, cobalt, coniferyl aldehyde, ethanol, iron, nickel, oxidative stress, 2-phenylethanol, and silver stress) by adaptive laboratory evolution were reassessed to reveal the correlated stress/stressor clusters based on their transcriptomic and stress–cross-resistance data. Principal Component Analysis (PCA) with k-means clustering was performed. Five clusters for the transcriptomic data of strains and six clusters for cross-resistance stressors were identified. Through statistical evaluations, critical genes pertinent to each cluster were elucidated. The pathways associated with these genes were investigated using the KEGG database. The findings demonstrated that caffeine and coniferyl aldehyde stressors exhibit clear distinctions from other stressors in terms of both physiological stress-cross-resistance responses and transcriptomic profiles. Pathway analysis showed that ribosome biogenesis was downregulated, and starch and sucrose metabolism was upregulated across all clusters. Gene and pathway analyses have shown that stressors lead to distinct changes in yeast gene expression, and these alterations have been systematically documented for each cluster. Several of the highlighted genes are pivotal for further exploration and could potentially clarify new aspects of stress response mechanisms and multiple stress resistance in yeast.
- Open Access
- 29 September 2023
- Published by MDPI AG in Journal of Fungi
- Vol. 9 (10) , 984
From Saccharomyces cerevisiae to Ethanol: Unlocking the Power of Evolutionary Engineering in Metabolic Engineering Applications
Increased human population and the rapid decline of fossil fuels resulted in a global tendency to look for alternative fuel sources. Environmental concerns about fossil fuel combustion led to a sharp move towards renewable and environmentally friendly biofuels. Ethanol has been the primary fossil fuel alternative due to its low carbon emission rates, high octane content and comparatively facile microbial production processes. In parallel to the increased use of bioethanol in various fields such as transportation, heating and power generation, improvements in ethanol production processes turned out to be a global hot topic. Ethanol is by far the leading yeast output amongst a broad spectrum of bio-based industries. Thus, as a well-known platform microorganism and native ethanol producer, baker’s yeast Saccharomyces cerevisiae has been the primary subject of interest for both academic and industrial perspectives in terms of enhanced ethanol production processes. Metabolic engineering strategies have been primarily adopted for direct manipulation of genes of interest responsible in mainstreams of ethanol metabolism. To overcome limitations of rational metabolic engineering, an alternative bottom-up strategy called inverse metabolic engineering has been widely used. In this context, evolutionary engineering, also known as adaptive laboratory evolution (ALE), which is based on random mutagenesis and systematic selection, is a powerful strategy to improve bioethanol production of S. cerevisiae. In this review, we focus on key examples of metabolic and evolutionary engineering for improved first- and second-generation S. cerevisiae bioethanol production processes. We delve into the current state of the field and show that metabolic and evolutionary engineering strategies are intertwined and many metabolically engineered strains for bioethanol production can be further improved by powerful evolutionary engineering strategies. We also discuss potential future directions that involve recent advancements in directed genome evolution, including CRISPR-Cas9 technology.
- 29 September 2023
- Published by MDPI AG in Journal of Fungi
- Vol. 9 (10) , 984
Open AccessFrom Saccharomyces cerevisiae to Ethanol: Unlocking the Power of Evolutionary Engineering in Metabolic Engineering Applications
Increased human population and the rapid decline of fossil fuels resulted in a global tendency to look for alternative fuel sources. Environmental concerns about fossil fuel combustion led to a sharp move towards renewable and environmentally friendly biofuels. Ethanol has been the primary fossil fuel alternative due to its low carbon emission rates, high octane content and comparatively facile microbial production processes. In parallel to the increased use of bioethanol in various fields such as transportation, heating and power generation, improvements in ethanol production processes turned out to be a global hot topic. Ethanol is by far the leading yeast output amongst a broad spectrum of bio-based industries. Thus, as a well-known platform microorganism and native ethanol producer, baker’s yeast Saccharomyces cerevisiae has been the primary subject of interest for both academic and industrial perspectives in terms of enhanced ethanol production processes. Metabolic engineering strategies have been primarily adopted for direct manipulation of genes of interest responsible in mainstreams of ethanol metabolism. To overcome limitations of rational metabolic engineering, an alternative bottom-up strategy called inverse metabolic engineering has been widely used. In this context, evolutionary engineering, also known as adaptive laboratory evolution (ALE), which is based on random mutagenesis and systematic selection, is a powerful strategy to improve bioethanol production of S. cerevisiae. In this review, we focus on key examples of metabolic and evolutionary engineering for improved first- and second-generation S. cerevisiae bioethanol production processes. We delve into the current state of the field and show that metabolic and evolutionary engineering strategies are intertwined and many metabolically engineered strains for bioethanol production can be further improved by powerful evolutionary engineering strategies. We also discuss potential future directions that involve recent advancements in directed genome evolution, including CRISPR-Cas9 technology.
- Open Access
- 11 April 2023
- Published by Frontiers Media SA in Frontiers in Microbiology
- Vol. 14
Genomic, transcriptomic, and metabolic characterization of 2-Phenylethanol-resistant Saccharomyces cerevisiae obtained by evolutionary engineering
2-Phenylethanol is an aromatic compound commonly used in the food, cosmetic, and pharmaceutical industries. Due to increasing demand for natural products by consumers, the production of this flavor by microbial fermentation is gaining interest, as a sustainable alternative to chemical synthesis or expensive plant extraction, both processes relying on the use of fossil resources. However, the drawback of the fermentation process is the high toxicity of 2-phenylethanol to the producing microorganism. The aim of this study was to obtain a 2-phenylethanol-resistant Saccharomyces cerevisiae strain by in vivo evolutionary engineering and characterize the adapted yeast at the genomic, transcriptomic and metabolic levels. For this purpose, the tolerance to 2-phenylethanol was developed by gradually increasing the concentration of this flavor compound through successive batch cultivations, leading to an adapted strain that could tolerate 3.4 g/L of 2-phenylethanol, which was about 3-times better than the reference strain. Genome sequencing of the adapted strain identified point mutations in several genes, notably in HOG1 that encodes the Mitogen-Activated Kinase of the high-osmolarity signaling pathway. As this mutation is localized in the phosphorylation lip of this protein, it likely resulted in a hyperactive protein kinase. Transcriptomic analysis of the adapted strain supported this suggestion by revealing a large set of upregulated stress-responsive genes that could be explained in great part by HOG1-dependent activation of the Msn2/Msn4 transcription factor. Another relevant mutation was found in PDE2 encoding the low affinity cAMP phosphodiesterase, the missense mutation of which may lead to hyperactivation of this enzyme and thereby enhance the stressful state of the 2-phenylethanol adapted strain. In addition, the mutation in CRH1 that encodes a chitin transglycosylase implicated in cell wall remodeling could account for the increased resistance of the adapted strain to the cell wall-degrading enzyme lyticase. Finally, the potent upregulation of ALD3 and ALD4 encoding NAD+ -dependent aldehyde dehydrogenase together with the observed phenylacetate resistance of the evolved strain suggest a resistance mechanism involving conversion of 2-phenylethanol into phenylacetaldehyde and phenylacetate implicating these dehydrogenases.
- 11 April 2023
- Published by Frontiers Media SA in Frontiers in Microbiology
- Vol. 14
Open AccessGenomic, transcriptomic, and metabolic characterization of 2-Phenylethanol-resistant Saccharomyces cerevisiae obtained by evolutionary engineering
2-Phenylethanol is an aromatic compound commonly used in the food, cosmetic, and pharmaceutical industries. Due to increasing demand for natural products by consumers, the production of this flavor by microbial fermentation is gaining interest, as a sustainable alternative to chemical synthesis or expensive plant extraction, both processes relying on the use of fossil resources. However, the drawback of the fermentation process is the high toxicity of 2-phenylethanol to the producing microorganism. The aim of this study was to obtain a 2-phenylethanol-resistant Saccharomyces cerevisiae strain by in vivo evolutionary engineering and characterize the adapted yeast at the genomic, transcriptomic and metabolic levels. For this purpose, the tolerance to 2-phenylethanol was developed by gradually increasing the concentration of this flavor compound through successive batch cultivations, leading to an adapted strain that could tolerate 3.4 g/L of 2-phenylethanol, which was about 3-times better than the reference strain. Genome sequencing of the adapted strain identified point mutations in several genes, notably in HOG1 that encodes the Mitogen-Activated Kinase of the high-osmolarity signaling pathway. As this mutation is localized in the phosphorylation lip of this protein, it likely resulted in a hyperactive protein kinase. Transcriptomic analysis of the adapted strain supported this suggestion by revealing a large set of upregulated stress-responsive genes that could be explained in great part by HOG1-dependent activation of the Msn2/Msn4 transcription factor. Another relevant mutation was found in PDE2 encoding the low affinity cAMP phosphodiesterase, the missense mutation of which may lead to hyperactivation of this enzyme and thereby enhance the stressful state of the 2-phenylethanol adapted strain. In addition, the mutation in CRH1 that encodes a chitin transglycosylase implicated in cell wall remodeling could account for the increased resistance of the adapted strain to the cell wall-degrading enzyme lyticase. Finally, the potent upregulation of ALD3 and ALD4 encoding NAD+ -dependent aldehyde dehydrogenase together with the observed phenylacetate resistance of the evolved strain suggest a resistance mechanism involving conversion of 2-phenylethanol into phenylacetaldehyde and phenylacetate implicating these dehydrogenases.
- Open Access
- 24 February 2022
- Published by Frontiers Media SA in Frontiers in Microbiology
- Vol. 13, 822864
Physiological and Molecular Characterization of an Oxidative Stress-Resistant Saccharomyces cerevisiae Strain Obtained by Evolutionary Engineering
Oxidative stress is a major stress type observed in yeast bioprocesses, resulting in a decrease in yeast growth, viability, and productivity. Thus, robust yeast strains with increased resistance to oxidative stress are in highly demand by the industry. In addition, oxidative stress is also associated with aging and age-related complex conditions such as cancer and neurodegenerative diseases. Saccharomyces cerevisiae, as a model eukaryote, has been used to study these complex eukaryotic processes. However, the molecular mechanisms underlying oxidative stress responses and resistance are unclear. In this study, we have employed evolutionary engineering (also known as adaptive laboratory evolution – ALE) strategies to obtain an oxidative stress-resistant and genetically stable S. cerevisiae strain. Comparative physiological, transcriptomic, and genomic analyses of the evolved strain were then performed with respect to the reference strain. The results show that the oxidative stress-resistant evolved strain was also cross-resistant against other types of stressors, including heat, freeze-thaw, ethanol, cobalt, iron, and salt. It was also found to have higher levels of trehalose and glycogen production. Further, comparative transcriptomic analysis showed an upregulation of many genes associated with the stress response, transport, carbohydrate, lipid and cofactor metabolic processes, protein phosphorylation, cell wall organization, and biogenesis. Genes that were downregulated included those related to ribosome and RNA processing, nuclear transport, tRNA, and cell cycle. Whole genome re-sequencing analysis of the evolved strain identified mutations in genes related to the stress response, cell wall organization, carbohydrate metabolism/transport, which are in line with the physiological and transcriptomic results, and may give insight toward the complex molecular mechanisms of oxidative stress resistance.
- 24 February 2022
- Published by Frontiers Media SA in Frontiers in Microbiology
- Vol. 13, 822864
Open AccessPhysiological and Molecular Characterization of an Oxidative Stress-Resistant Saccharomyces cerevisiae Strain Obtained by Evolutionary Engineering
Oxidative stress is a major stress type observed in yeast bioprocesses, resulting in a decrease in yeast growth, viability, and productivity. Thus, robust yeast strains with increased resistance to oxidative stress are in highly demand by the industry. In addition, oxidative stress is also associated with aging and age-related complex conditions such as cancer and neurodegenerative diseases. Saccharomyces cerevisiae, as a model eukaryote, has been used to study these complex eukaryotic processes. However, the molecular mechanisms underlying oxidative stress responses and resistance are unclear. In this study, we have employed evolutionary engineering (also known as adaptive laboratory evolution – ALE) strategies to obtain an oxidative stress-resistant and genetically stable S. cerevisiae strain. Comparative physiological, transcriptomic, and genomic analyses of the evolved strain were then performed with respect to the reference strain. The results show that the oxidative stress-resistant evolved strain was also cross-resistant against other types of stressors, including heat, freeze-thaw, ethanol, cobalt, iron, and salt. It was also found to have higher levels of trehalose and glycogen production. Further, comparative transcriptomic analysis showed an upregulation of many genes associated with the stress response, transport, carbohydrate, lipid and cofactor metabolic processes, protein phosphorylation, cell wall organization, and biogenesis. Genes that were downregulated included those related to ribosome and RNA processing, nuclear transport, tRNA, and cell cycle. Whole genome re-sequencing analysis of the evolved strain identified mutations in genes related to the stress response, cell wall organization, carbohydrate metabolism/transport, which are in line with the physiological and transcriptomic results, and may give insight toward the complex molecular mechanisms of oxidative stress resistance.
Genomic, transcriptomic and physiological analyses of silver‐resistant Saccharomyces cerevisiae obtained by evolutionary engineering
Silver is a non‐essential metal used in medical applications as an antimicrobial agent, but it is also toxic for biological systems. To investigate the molecular basis of silver resistance in yeast, we employed evolutionary engineering using successive batch cultures at gradually increased silver stress levels up to 0.25‐mM AgNO3 in 29 populations and obtained highly silver‐resistant and genetically stable Saccharomyces cerevisiae strains. Cross‐resistance analysis results indicated that the silver‐resistant mutants also gained resistance against copper and oxidative stress. Growth physiological analysis results revealed that the highly silver‐resistant evolved strain 2E was not significantly inhibited by silver stress, unlike the reference strain. Genomic and transcriptomic analysis results revealed that there were mutations and/or significant changes in the expression levels of the genes involved in cell wall integrity, cellular respiration, oxidative metabolism, copper homeostasis, endocytosis and vesicular transport activities. Particularly the missense mutation in the RLM1 gene encoding a transcription factor involved in the maintenance of cell wall integrity and with 707 potential gene targets might have a key role in the high silver resistance of 2E, along with its improved cell wall integrity, as confirmed by the lyticase sensitivity assay results. In conclusion, the comparative physiological, transcriptomic and genomic analysis results of the silver‐resistant S. cerevisiae strain revealed potential key factors that will help understand the complex molecular mechanisms of silver resistance in yeast.
Genomic, transcriptomic and physiological analyses of silver‐resistant Saccharomyces cerevisiae obtained by evolutionary engineering
Silver is a non‐essential metal used in medical applications as an antimicrobial agent, but it is also toxic for biological systems. To investigate the molecular basis of silver resistance in yeast, we employed evolutionary engineering using successive batch cultures at gradually increased silver stress levels up to 0.25‐mM AgNO3 in 29 populations and obtained highly silver‐resistant and genetically stable Saccharomyces cerevisiae strains. Cross‐resistance analysis results indicated that the silver‐resistant mutants also gained resistance against copper and oxidative stress. Growth physiological analysis results revealed that the highly silver‐resistant evolved strain 2E was not significantly inhibited by silver stress, unlike the reference strain. Genomic and transcriptomic analysis results revealed that there were mutations and/or significant changes in the expression levels of the genes involved in cell wall integrity, cellular respiration, oxidative metabolism, copper homeostasis, endocytosis and vesicular transport activities. Particularly the missense mutation in the RLM1 gene encoding a transcription factor involved in the maintenance of cell wall integrity and with 707 potential gene targets might have a key role in the high silver resistance of 2E, along with its improved cell wall integrity, as confirmed by the lyticase sensitivity assay results. In conclusion, the comparative physiological, transcriptomic and genomic analysis results of the silver‐resistant S. cerevisiae strain revealed potential key factors that will help understand the complex molecular mechanisms of silver resistance in yeast.
- Open Access
- 24 December 2019
- Published by MDPI AG in Microorganisms
- Vol. 8 (1) , 43
Evolutionary Engineering of an Iron-Resistant Saccharomyces cerevisiae Mutant and Its Physiological and Molecular Characterization
Iron plays an essential role in all organisms and is involved in the structure of many biomolecules. It also regulates the Fenton reaction where highly reactive hydroxyl radicals occur. Iron is also important for microbial biodiversity, health and nutrition. Excessive iron levels can cause oxidative damage in cells. Saccharomyces cerevisiae evolved mechanisms to regulate its iron levels. To study the iron stress resistance in S. cerevisiae, evolutionary engineering was employed. The evolved iron stress-resistant mutant “M8FE” was analysed physiologically, transcriptomically and by whole genome re-sequencing. M8FE showed cross-resistance to other transition metals: cobalt, chromium and nickel and seemed to cope with the iron stress by both avoidance and sequestration strategies. PHO84, encoding the high-affinity phosphate transporter, was the most down-regulated gene in the mutant, and may be crucial in iron-resistance. M8FE had upregulated many oxidative stress response, reserve carbohydrate metabolism and mitophagy genes, while ribosome biogenesis genes were downregulated. As a possible result of the induced oxidative stress response genes, lower intracellular oxidation levels were observed. M8FE also had high trehalose and glycerol production levels. Genome re-sequencing analyses revealed several mutations associated with diverse cellular and metabolic processes, like cell division, phosphate-mediated signalling, cell wall integrity and multidrug transporters.
- 24 December 2019
- Published by MDPI AG in Microorganisms
- Vol. 8 (1) , 43
Open AccessEvolutionary Engineering of an Iron-Resistant Saccharomyces cerevisiae Mutant and Its Physiological and Molecular Characterization
Iron plays an essential role in all organisms and is involved in the structure of many biomolecules. It also regulates the Fenton reaction where highly reactive hydroxyl radicals occur. Iron is also important for microbial biodiversity, health and nutrition. Excessive iron levels can cause oxidative damage in cells. Saccharomyces cerevisiae evolved mechanisms to regulate its iron levels. To study the iron stress resistance in S. cerevisiae, evolutionary engineering was employed. The evolved iron stress-resistant mutant “M8FE” was analysed physiologically, transcriptomically and by whole genome re-sequencing. M8FE showed cross-resistance to other transition metals: cobalt, chromium and nickel and seemed to cope with the iron stress by both avoidance and sequestration strategies. PHO84, encoding the high-affinity phosphate transporter, was the most down-regulated gene in the mutant, and may be crucial in iron-resistance. M8FE had upregulated many oxidative stress response, reserve carbohydrate metabolism and mitophagy genes, while ribosome biogenesis genes were downregulated. As a possible result of the induced oxidative stress response genes, lower intracellular oxidation levels were observed. M8FE also had high trehalose and glycerol production levels. Genome re-sequencing analyses revealed several mutations associated with diverse cellular and metabolic processes, like cell division, phosphate-mediated signalling, cell wall integrity and multidrug transporters.
- 14 November 2019
- Published by Springer Nature in World Journal of Microbiology and Biotechnology
- Vol. 35 (12) , 183
Evolutionary engineering and molecular characterization of a caffeine-resistant Saccharomyces cerevisiae strain
Caffeine is a naturally occurring alkaloid, where its major consumption occurs with beverages such as coffee, soft drinks and tea. Despite a variety of reports on the effects of caffeine on diverse organisms including yeast, the complex molecular basis of caffeine resistance and response has yet to be understood. In this study, a caffeine-hyperresistant and genetically stable Saccharomyces cerevisiae mutant was obtained for the first time by evolutionary engineering, using batch selection in the presence of gradually increased caffeine stress levels and without any mutagenesis of the initial population prior to selection. The selected mutant could resist up to 50 mM caffeine, a level, to our knowledge, that has not been reported for S. cerevisiae so far. The mutant was also resistant to the cell wall-damaging agent lyticase, and it showed cross-resistance against various compounds such as rapamycin, antimycin, coniferyl aldehyde and cycloheximide. Comparative transcriptomic analysis results revealed that the genes involved in the energy conservation and production pathways, and pleiotropic drug resistance were overexpressed. Whole genome re-sequencing identified single nucleotide polymorphisms in only three genes of the caffeine-hyperresistant mutant; PDR1, PDR5 and RIM8, which may play a potential role in caffeine-hyperresistance.
- 14 November 2019
- Published by Springer Nature in World Journal of Microbiology and Biotechnology
- Vol. 35 (12) , 183
Evolutionary engineering and molecular characterization of a caffeine-resistant Saccharomyces cerevisiae strain
Caffeine is a naturally occurring alkaloid, where its major consumption occurs with beverages such as coffee, soft drinks and tea. Despite a variety of reports on the effects of caffeine on diverse organisms including yeast, the complex molecular basis of caffeine resistance and response has yet to be understood. In this study, a caffeine-hyperresistant and genetically stable Saccharomyces cerevisiae mutant was obtained for the first time by evolutionary engineering, using batch selection in the presence of gradually increased caffeine stress levels and without any mutagenesis of the initial population prior to selection. The selected mutant could resist up to 50 mM caffeine, a level, to our knowledge, that has not been reported for S. cerevisiae so far. The mutant was also resistant to the cell wall-damaging agent lyticase, and it showed cross-resistance against various compounds such as rapamycin, antimycin, coniferyl aldehyde and cycloheximide. Comparative transcriptomic analysis results revealed that the genes involved in the energy conservation and production pathways, and pleiotropic drug resistance were overexpressed. Whole genome re-sequencing identified single nucleotide polymorphisms in only three genes of the caffeine-hyperresistant mutant; PDR1, PDR5 and RIM8, which may play a potential role in caffeine-hyperresistance.