GGGang Gao

Gang Gao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gang Gao has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Dual-function yttrium oxynitride films for protection and transmittance enhancement of infrared ZnS windows

    by Kun Li, Gang Gao, Xixi Qu, Chao Duan, Yujie Qin, Hong Zhang, Lei Yang, Yumin Zhang, Jiaqi Zhu


  • Open Access

    Tungsten coating by diffusion on diamond surfaces: process and characterization

    by Zhenhua Su, Kai Han, Zhijie Ye, Jiwen Zhao, Xiangpeng Tang, Jinzhuo Pang, Di Zhu, Tingting Sun, Gang Gao, Wenxin Cao

    Tungsten coating on the diamond surface can significantly enhance the thermal stability, corrosion resistance, and wear resistance of diamond, thereby stabilizing its performance. It can also improve the wettability of diamond with other matrix materials, enhance interfacial bonding, and optimize the properties of composite materials. In this study, high-purity tungsten powder was treated, and a self-made coating material was used to coat a nano-tungsten layer on the diamond surface via diffusion coating. The phase, microstructure, and microscopic defects of the tungsten-coated diamond were characterized and analyzed. The results show that continuous and dense nano-coatings can be formed on the diamond surface through diffusion coating. The main phases of the coatings are W, W₂C, and WC, with the absolute contents of W₂C and WC increasing as the coating time increases. The relationship between coating thickness and coating time transitions from linear to nonlinear with increasing time. The diamond {111} surface typically forms a dense, continuous structure with triangular etched pits, while the {100} surface usually presents a granular junction with square etched pits and a higher degree of etching. Additionally, random, irregular etched pits are observed on the diamond surface. These findings are of great significance for improving diamond properties and are expected to guide the development of diamond surface metallization and the diamond composite material system.


  • Open Access

    Multiple defects renovation and phase reconstruction of reduced-dimensional perovskites via in situ chlorination for efficient deep-blue (454 nm) light-emitting diodes

    by Mubing Yu, Tingxiao Qin, Gang Gao, Kelei Zu, Dongming Zhang, Nan Chen, Dengke Wang, Yong Hua, Hong Zhang, Yong-Biao Zhao, et al.

    Deep-blue perovskite light-emitting diodes (PeLEDs) based on reduced-dimensional perovskites (RDPs) still face a few challenges including severe trap-assisted nonradiative recombination, sluggish exciton transfer, and undesirable bathochromic shift of the electroluminescence spectra, impeding the realization of high-performance PeLEDs. Herein, an in situ chlorination (isCl) post-treatment strategy was employed to regulate phase reconstruction and renovate multiple defects of RDPs, leading to superior carrier cooling of 0.88 ps, extraordinary exciton binding energy of 122.53 meV, and higher photoluminescence quantum yield of 60.9% for RDP films with deep-blue emission at 450 nm. The phase regulation is accomplished via fluorine-derived hydrogen bonds that suppress the formation of small-n phases. Multiple defects, including halide vacancies (shallow-state defects) and lead-chloride antisite defects (deep-state defects), are renovated via C=O coordination and hydroxy-group-derived hydrogen bonds. Consequently, deep-blue PeLEDs with a record maximum external quantum efficiency of 6.17% and stable electroluminescence at 454 nm were demonstrated, representing the best-performing deep-blue PeLEDs.


  • Open Access

    A simple and economic method to modify large organic surfaces for enhancing adhesion and transparent Au/PMMA with high electromagnetic shielding efficiency

    by Gang Gao, Shiqi Zeng, Kun Li, Chao Duan, Yujie Qin, Lei Yang, Hong Zhang, Wenxin Cao, Jiaqi Zhu

    This study introduces a simple and cost-effective approach for modifying large organic surfaces, facilitating robust adhesion between Au films and polymethyl methacrylate (PMMA) while retaining transparency to visible light and effectively shielding against electromagnetic interference (EMI). The proposed surface modification method employs a cheap low-power conventional UV lamp to illuminate organic surfaces in an open environment, rending it convenient and applicable for surfaces ranging from small to massive, irrespective of size, shape and location. By subjecting transparent PMMA glass to a brief 20–30 min exposure to a 36 W UV lamp positioned 5 cm away from the sample surface, the PMMA surface is dramatically modified and the surface is turned from hydrophobic to hydrophilic, establishing a strong adhesion between PMMA and Au films. The resulting Au/PMMA glass exhibits remarkable transparency about 70% within the visible light spectrum, coupled with an impressive EMI shielding efficiency that surpasses 20 dB across a broad range of electromagnetic wavebands, encompassing the S, C, X and Ku bands that correspond to the wave frequencies of major electromagnetic pollution and crucial applications of 5G communication, credit card validation, radar systems, traffic control, etc. Various characterizations have been conducted, elucidating the underlying mechanisms. This study presents an important advancement, and the accessible and scalable nature of the large-scalable surface modification method has far-reaching implications across numerous industrial sectors and applications, in addition to transparent EMI shielding Au/PMMA glasses.


  • Open Access

    The impact of thickness-related grain boundary migration on hole concentration and mobility of p-type transparent conducting CuI films

    by Ruibin Xue, Gang Gao, Lei Yang, Liangge Xu, Yumin Zhang, Jiaqi Zhu

    CuI films present promising optoelectronic properties for transparent conductors. However, the high hole concentration in CuI films hinders the controllable modulation of hole mobility, limiting their application in low-dimensional thin-film transistors. In this study, CuI films were prepared through a Cu film iodination method at room temperature, and a systematic investigation was conducted on the modulation of hole concentration and mobility with varying film thickness. The films exhibited a zinc blende structure (γ-phase) with increasing grain size as the thickness increased. The transmittance and optical bandgap of the films decreased with increasing thickness. The correlation of vacancy concentration with changing film thickness was analyzed through photoluminescence spectroscopy, revealing the influence of grain boundary migration on vacancy formation. The reduction in film thickness diminishes the migration of CuI grain boundaries, consequently reducing the probability of Cu vacancy and I vacancy formation, resulting in diminished hole concentration and enhanced hole mobility and film conductivity. The film with a thickness of 20 nm demonstrated optimal performance, with a transmittance of 90%, hole concentration of 4.09 × 1017 cm−3, hole mobility of 506.50 cm2 V−1 s−1, and conductivity of 33.19 S cm−1. This work deepens the understanding of hole transport such as hole concentration and mobility modulation in CuI films, highlighting the importance of controlling grain boundary migration during the film growth process.


  • Open Access

    Progress in infrared transparencies under opto electro thermo and mechanical environments

    by Liangge Xu, Shuai Guo, Victor Ralchenko, Gang Gao, Sam Zhang, Jiaqi Zhu

    In recent years, there has been a growing interest and research focus on infrared optical thin films as essential components in infrared optical systems. In practical applications, extreme environmental factors such as aerodynamic heating and mechanical stresses, electromagnetic interferences, laser interferences, sand erosions, and rain erosions all lead to issues including cracking, wrinkling, and delaminations of infrared thin films. Extreme application environment imposes stringent requirements on functional films, necessitating high surface hardness, stability, and adhesion. Additionally, for multispectral optical transmissions, infrared optical thin films are expected to exhibit high transmittance in the visible and far-infrared wavelength bands while possessing tunability and optical anti-reflection properties in specific wavelength ranges. Electromagnetic shielding requires superior electrical performance, while resisting laser interference demands rapid phase change capabilities. This paper focuses on current research progresses in infrared optical thin films under extreme conditions such as opto, electro, thermos and mechanical environments. Table of Contents Graphic gives detailed outline. Future opportunities and challenges are also highlighted. Graphical Abstract


  • High-performance p-type transparent conducting CuI–Cu 2 O thin films with enhanced hole mobility, surface, and stability

    by Ruibin Xue, Gang Gao, Lei Yang, Liangge Xu, Yumin Zhang, Jiaqi Zhu

    We employed reactive magnetron sputtering and iodination process at room temperature to deposit CuI–Cu 2 O films with enhanced hole mobility, surface, and stability.