Nikola Rimac
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nikola Rimac has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Željka Ujević Andrijić
Faculty of Chemical Engineering, University of Zagreb, 10000 Zagreb, Croatia
4 shared publications - Nenad Bolf
Department of Measurements and Process Control, Faculty of Chemical Engineering and Technology, University of Zagreb, 10000 Zagreb, Croatia
3 shared publications - Srečko Herceg
Faculty of Chemical Engineering and Technology, University of Zagreb, Trg Marka Marulića 19, 10000 Zagreb, Croatia
2 shared publications - Damir Šahnić
PLIVA Croatia Ltd. (member of TEVA Group), Prilaz baruna Filipovića 25, 10000 Zagreb, Croatia
1 shared publication - Josip Budimir Sacher
Department of Measurements and Process Control, Faculty of Chemical Engineering and Technology, University of Zagreb, 10000 Zagreb, Croatia
1 shared publication - Matea Gavran
Department of Measurements and Process Control, Faculty of Chemical Engineering and Technology, University of Zagreb, 1000 Zagreb, Croatia
1 shared publication
Latest Publications
- Open Access
Data-Driven Fouling Detection in Refinery Preheat Train Heat Exchangers Using Neural Networks and Gradient Boosting
Fouling detection in refinery crude distillation unit (CDU) preheat trains is essential for maintaining energy efficiency and operational reliability. This study presents a virtual sensing approach for fouling monitoring using data-driven and semi-empirical models. Specifically, Long Short-Term Memory (LSTM) neural networks, Extreme Gradient Boosting (XGB), and the ɛ-NTU method (effectiveness—Number of Transfer Units) were compared for predicting heat exchanger outlet temperatures, which serve as indicators of fouling. Models were trained on clean operational data to estimate baseline performance. A growing discrepancy between predicted and actual outlet temperatures over time indicated heat transfer degradation. Fouling resistance was calculated from the difference between predicted and actual heat transfer coefficients, enabling effectiveness loss assessment. The LSTM model showed high accuracy in capturing dynamic operational trends, while XGB provided a lightweight alternative with limited extrapolation capability under unfamiliar conditions. Both models outperformed the ɛ-NTU approach in fouling detection sensitivity. Inefficiencies from a single fouled exchanger were estimated to result in an additional 175 tons of CO2 emissions and an economic loss of approximately EUR 12,000 over two months. This study highlights the potential of AI-enabled virtual sensors for real-time fouling monitoring in industrial heat exchangers. Such tools can significantly enhance predictive maintenance strategies, improve energy efficiency, and reduce emissions.
Open AccessData-Driven Fouling Detection in Refinery Preheat Train Heat Exchangers Using Neural Networks and Gradient Boosting
Fouling detection in refinery crude distillation unit (CDU) preheat trains is essential for maintaining energy efficiency and operational reliability. This study presents a virtual sensing approach for fouling monitoring using data-driven and semi-empirical models. Specifically, Long Short-Term Memory (LSTM) neural networks, Extreme Gradient Boosting (XGB), and the ɛ-NTU method (effectiveness—Number of Transfer Units) were compared for predicting heat exchanger outlet temperatures, which serve as indicators of fouling. Models were trained on clean operational data to estimate baseline performance. A growing discrepancy between predicted and actual outlet temperatures over time indicated heat transfer degradation. Fouling resistance was calculated from the difference between predicted and actual heat transfer coefficients, enabling effectiveness loss assessment. The LSTM model showed high accuracy in capturing dynamic operational trends, while XGB provided a lightweight alternative with limited extrapolation capability under unfamiliar conditions. Both models outperformed the ɛ-NTU approach in fouling detection sensitivity. Inefficiencies from a single fouled exchanger were estimated to result in an additional 175 tons of CO2 emissions and an economic loss of approximately EUR 12,000 over two months. This study highlights the potential of AI-enabled virtual sensors for real-time fouling monitoring in industrial heat exchangers. Such tools can significantly enhance predictive maintenance strategies, improve energy efficiency, and reduce emissions.
- Open Access
Development of a Calibration Model for Real-Time Solute Concentration Monitoring during Crystallization of Ceritinib Using Raman Spectroscopy and In-Line Process Microscopy
Raman spectroscopy is a useful tool for polymorphic form-monitoring during the crystallization process. However, its application to solute concentration estimation in two-phase systems like crystallization is rare, as the Raman signal is influenced by various changing factors in the crystallization process. The development of a robust calibration model that covers all variations is complex and represents a major challenge for the implementation of Raman spectroscopy for in-line monitoring and control of the solution crystallization process. This paper describes the development of a Raman-based calibration model for estimating the solute concentration of the active pharmaceutical ingredient ceritinib. Several different calibration approaches were tested, which included both temperature and spectra of clear solutions and slurries/suspensions. It was found that the concentration of the ceritinib solution could not be accurately predicted when suspended crystals were present. To overcome this challenge, the approach was enhanced by including additional variables related to crystal size and solid concentration obtained via in-line process microscopy (chord-length distribution percentiles D10, D50 and D90) and turbidity. Partial least squares regression (PLSR) and artificial neural network (ANN) models were developed and compared based on root mean square error (RMSE). ANN models estimated the solute concentration with high accuracy, with the prediction error not exceeding 1% of the nominal solute concentration.
Open AccessDevelopment of a Calibration Model for Real-Time Solute Concentration Monitoring during Crystallization of Ceritinib Using Raman Spectroscopy and In-Line Process Microscopy
Raman spectroscopy is a useful tool for polymorphic form-monitoring during the crystallization process. However, its application to solute concentration estimation in two-phase systems like crystallization is rare, as the Raman signal is influenced by various changing factors in the crystallization process. The development of a robust calibration model that covers all variations is complex and represents a major challenge for the implementation of Raman spectroscopy for in-line monitoring and control of the solution crystallization process. This paper describes the development of a Raman-based calibration model for estimating the solute concentration of the active pharmaceutical ingredient ceritinib. Several different calibration approaches were tested, which included both temperature and spectra of clear solutions and slurries/suspensions. It was found that the concentration of the ceritinib solution could not be accurately predicted when suspended crystals were present. To overcome this challenge, the approach was enhanced by including additional variables related to crystal size and solid concentration obtained via in-line process microscopy (chord-length distribution percentiles D10, D50 and D90) and turbidity. Partial least squares regression (PLSR) and artificial neural network (ANN) models were developed and compared based on root mean square error (RMSE). ANN models estimated the solute concentration with high accuracy, with the prediction error not exceeding 1% of the nominal solute concentration.
- Open Access
- 2 November 2023
- Published by MDPI AG in Mathematics
- Vol. 11 (21) , 4518
Development of Mathematical Models for Industrial Processes Using Dynamic Neural Networks
Dynamic neural networks (DNNs) are a type of artificial neural network (ANN) designed to work with sequential data where context in time is important. Unlike traditional static neural networks that process data in a fixed order, dynamic neural networks use information about past inputs, which is important if the dynamic of a certain process is emphasized. They are commonly used in natural language processing, speech recognition, and time series prediction. In industrial processes, their use is interesting for the prediction of difficult-to-measure process variables. In an industrial isomerization process, it is crucial to measure the quality attributes that affect the octane number of gasoline. Process analyzers commonly used for this purpose are expensive and subject to failure. Therefore, to achieve continuous production in the event of a malfunction, mathematical models for estimating product quality attributes are imposed as a solution. In this paper, mathematical models were developed using dynamic recurrent neural networks (RNNs), i.e., their subtype of a long short-term memory (LSTM) architecture. The results of the developed models were compared with the results of several types of other data-driven models developed for an isomerization process, such as multilayer perceptron (MLP) artificial neural networks, support vector machines (SVM), and dynamic polynomial models. The obtained results are satisfactory, suggesting a good possibility of application.
- 2 November 2023
- Published by MDPI AG in Mathematics
- Vol. 11 (21) , 4518
Open AccessDevelopment of Mathematical Models for Industrial Processes Using Dynamic Neural Networks
Dynamic neural networks (DNNs) are a type of artificial neural network (ANN) designed to work with sequential data where context in time is important. Unlike traditional static neural networks that process data in a fixed order, dynamic neural networks use information about past inputs, which is important if the dynamic of a certain process is emphasized. They are commonly used in natural language processing, speech recognition, and time series prediction. In industrial processes, their use is interesting for the prediction of difficult-to-measure process variables. In an industrial isomerization process, it is crucial to measure the quality attributes that affect the octane number of gasoline. Process analyzers commonly used for this purpose are expensive and subject to failure. Therefore, to achieve continuous production in the event of a malfunction, mathematical models for estimating product quality attributes are imposed as a solution. In this paper, mathematical models were developed using dynamic recurrent neural networks (RNNs), i.e., their subtype of a long short-term memory (LSTM) architecture. The results of the developed models were compared with the results of several types of other data-driven models developed for an isomerization process, such as multilayer perceptron (MLP) artificial neural networks, support vector machines (SVM), and dynamic polynomial models. The obtained results are satisfactory, suggesting a good possibility of application.
- Open Access
- 1 October 2023
- Published by MDPI AG in Preprints.org
Development of Mathematical Models for Industrial Processes Using Dynamic Neural Networks
Dynamic neural networks (DNN) are types of artificial neural networks (ANN) that are designed to work with sequential data where context in time is important. In contrast to traditional static neural networks that process data in a fixed order, dynamic neural networks use information about past inputs, which is important if dynamic of a certain process is emphasized. They are widely used in natural language processing, speech recognition and time series prediction. In industrial processes, their use is interesting for the prediction of difficult-to-measure process variables. In an industrial process of isomerization, it is crucial to measure the quality attributes affecting the octane number of gasoline. Process analyzers that are commonly used for this purpose are expensive and subject to failures, therefore, in order to achieve continuous production in case of malfunction, mathematical models for estimating the product quality attributes are imposed as a solution. In this paper, mathematical models were developed using dynamic recurrent neural networks (RNN), i.e., their subtype of a long short-term memory (LSTM) architecture. The results of the developed models were compared with the results of several types of other data-driven models developed for an isomerization process, such as multilayer perceptron (MLP) artificial neural networks, support vector machines (SVM) and dynamic polynomial models. The obtained results are satisfactory, which suggests a good possibility of application.
- 1 October 2023
- Published by MDPI AG in Preprints.org
Open AccessDevelopment of Mathematical Models for Industrial Processes Using Dynamic Neural Networks
Dynamic neural networks (DNN) are types of artificial neural networks (ANN) that are designed to work with sequential data where context in time is important. In contrast to traditional static neural networks that process data in a fixed order, dynamic neural networks use information about past inputs, which is important if dynamic of a certain process is emphasized. They are widely used in natural language processing, speech recognition and time series prediction. In industrial processes, their use is interesting for the prediction of difficult-to-measure process variables. In an industrial process of isomerization, it is crucial to measure the quality attributes affecting the octane number of gasoline. Process analyzers that are commonly used for this purpose are expensive and subject to failures, therefore, in order to achieve continuous production in case of malfunction, mathematical models for estimating the product quality attributes are imposed as a solution. In this paper, mathematical models were developed using dynamic recurrent neural networks (RNN), i.e., their subtype of a long short-term memory (LSTM) architecture. The results of the developed models were compared with the results of several types of other data-driven models developed for an isomerization process, such as multilayer perceptron (MLP) artificial neural networks, support vector machines (SVM) and dynamic polynomial models. The obtained results are satisfactory, which suggests a good possibility of application.