Brian Pieralisi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Brian Pieralisi has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Whitney D. Crow
Department of Agricultural Science and Plant Protection Mississippi State University Mississippi State Mississippi USA
5 shared publications - Gene Dave Spencer
Mississippi Water Resources Research Institute Mississippi State University Mississippi State Mississippi USA
4 shared publications Darrin Dodds
Mississippi Agricultural and Forestry Experiment Station Mississippi State University Mississippi State Mississippi USA
3 shared publications- William J. Rutland
Department of Plant and Soil Science Mississippi State University Mississippi State Mississippi USA
3 shared publications Angus Catchot
Mississippi State University Extension Service Starkville Massachusetts
2 shared publicationsBrian E. Mills
Department of Agricultural Economics Mississippi State University Mississippi State Mississippi USA
2 shared publications
Latest Publications
- Open Access
- 5 October 2026
- Published by Wiley
Mississippi Representativeness in the National Cotton Variety Test: Stoneville as a 30-Year Anchor
State and national cotton variety trials guide cultivar selection, but the degree to which a specific state or test site represents a broader multi-environment network is rarely quantified over long periods. We evaluated 30 years (1993-2022) of Upland cotton data from the U.S. National Cotton Variety Test (NCVT) to determine how well cultivar performance in Mississippi represented performance across non-Mississippi sites, with emphasis on Stoneville, MS. Stoneville was represented in every year of the NCVT data. The analysis included 11,704 location-test-cultivar observations from 64 physical locations. Lint yield was standardized within each test environment as relative yield (RY), and same-year cultivar performance in Mississippi was paired with the mean of non-Mississippi sites. Across 849 cultivar-year pairs, Mississippi RY was moderately associated with non-Mississippi performance (Spearman ρ = 0.543; slope = 0.823, 95% CI 0.733-0.913; R2 = 0.334). Annual rank correlations ranged from 0.141 to 0.811, and 47.1% of non-Mississippi top-quartile cultivars were also top-quartile in Mississippi. Stoneville showed stronger 30-year representativeness (ρ = 0.591; slope = 0.899; R2 = 0.365) than Starkville, and a hierarchical model estimated a 0.278 greater transfer slope for Stoneville (P = 0.0027). Stoneville ranked first among 32 recurrent sites in the primary all-Upland benchmark and remained highly representative in a regional test-only sensitivity analysis. Broad NCVT performance therefore provides useful, but incomplete information for Mississippi, supporting continued state-specific multi-environment testing.
- 5 October 2026
- Published by Wiley
Open AccessMississippi Representativeness in the National Cotton Variety Test: Stoneville as a 30-Year Anchor
State and national cotton variety trials guide cultivar selection, but the degree to which a specific state or test site represents a broader multi-environment network is rarely quantified over long periods. We evaluated 30 years (1993-2022) of Upland cotton data from the U.S. National Cotton Variety Test (NCVT) to determine how well cultivar performance in Mississippi represented performance across non-Mississippi sites, with emphasis on Stoneville, MS. Stoneville was represented in every year of the NCVT data. The analysis included 11,704 location-test-cultivar observations from 64 physical locations. Lint yield was standardized within each test environment as relative yield (RY), and same-year cultivar performance in Mississippi was paired with the mean of non-Mississippi sites. Across 849 cultivar-year pairs, Mississippi RY was moderately associated with non-Mississippi performance (Spearman ρ = 0.543; slope = 0.823, 95% CI 0.733-0.913; R2 = 0.334). Annual rank correlations ranged from 0.141 to 0.811, and 47.1% of non-Mississippi top-quartile cultivars were also top-quartile in Mississippi. Stoneville showed stronger 30-year representativeness (ρ = 0.591; slope = 0.899; R2 = 0.365) than Starkville, and a hierarchical model estimated a 0.278 greater transfer slope for Stoneville (P = 0.0027). Stoneville ranked first among 32 recurrent sites in the primary all-Upland benchmark and remained highly representative in a regional test-only sensitivity analysis. Broad NCVT performance therefore provides useful, but incomplete information for Mississippi, supporting continued state-specific multi-environment testing.
- Open Access
- 20 April 2026
- Published by Elsevier in Field Crops Research
- Vol. 343
Genotype × environment interaction and multi-trait stability of cotton lint yield and fiber quality across irrigated and rainfed environments
- 20 April 2026
- Published by Elsevier in Field Crops Research
- Vol. 343
Open AccessGenotype × environment interaction and multi-trait stability of cotton lint yield and fiber quality across irrigated and rainfed environments
- Open Access
- 8 September 2025
- Published by Wiley in Agronomy Journal
- Vol. 117 (5)
Cotton response to row pattern and plant density: Part I—Development and yield
The ability of cotton ( Gossypium hirsutum L.) to compensate for lower plant densities and 2 × 1 skip row patterns has been evaluated by numerous studies. Studies were conducted to determine if cotton yield can be maintained in a 1 × 1 skip row pattern and across plant densities to increase profit margins. Cotton growth, development, and yield were investigated in an irrigated production system in Starkville, MS, on a Leaper silty clay loam (fine, smectitic, nonacid, and thermic Vertic Epiaquepts) and in Stoneville, MS, on a Beulah very fine sandy loam (coarse‐loamy, mixed, active, and thermic Typic Dystrudepts). Row patterns consisted of solid planted and 1 × 1 skip row pattern, and plant density consisted of 37,065, 74,130, 111,195, and 148,260 plants ha −1 . Skip row pattern and lower plant density reduced plant height. Total node and nodes above cracked boll were reduced as plant density increased. There was an interaction between location, year, and pattern, as well as year and plant density, with respect to yield. At three of four site years, solid row pattern produced greater yield in comparison to skip row pattern. However, row pattern and plant density had no effect on yield when pooled over location and year. Net returns varied by location and row pattern. Skip row produced a greater net return in Stoneville when compared to solid planting pattern; however, in Starkville, a greater net return was produced with solid planting pattern. Increased plant density did not increase profit margin due to increased seed costs.
- 8 September 2025
- Published by Wiley in Agronomy Journal
- Vol. 117 (5)
Open AccessCotton response to row pattern and plant density: Part I—Development and yield
The ability of cotton ( Gossypium hirsutum L.) to compensate for lower plant densities and 2 × 1 skip row patterns has been evaluated by numerous studies. Studies were conducted to determine if cotton yield can be maintained in a 1 × 1 skip row pattern and across plant densities to increase profit margins. Cotton growth, development, and yield were investigated in an irrigated production system in Starkville, MS, on a Leaper silty clay loam (fine, smectitic, nonacid, and thermic Vertic Epiaquepts) and in Stoneville, MS, on a Beulah very fine sandy loam (coarse‐loamy, mixed, active, and thermic Typic Dystrudepts). Row patterns consisted of solid planted and 1 × 1 skip row pattern, and plant density consisted of 37,065, 74,130, 111,195, and 148,260 plants ha −1 . Skip row pattern and lower plant density reduced plant height. Total node and nodes above cracked boll were reduced as plant density increased. There was an interaction between location, year, and pattern, as well as year and plant density, with respect to yield. At three of four site years, solid row pattern produced greater yield in comparison to skip row pattern. However, row pattern and plant density had no effect on yield when pooled over location and year. Net returns varied by location and row pattern. Skip row produced a greater net return in Stoneville when compared to solid planting pattern; however, in Starkville, a greater net return was produced with solid planting pattern. Increased plant density did not increase profit margin due to increased seed costs.
- 5 September 2025
- Published by Wiley in Agronomy Journal
- Vol. 117 (5)
Cotton response to row pattern and plant density: Part II. Boll distribution
Studies have shown cotton ( Gossypium hirsutum L.) can sustain high yields at various row spacings and plant densities. The ability of cotton to compensate is due to boll distribution. There are numerous studies evaluating the effects of skip‐row production and narrow row spacing on boll distribution. However, very little research is available evaluating the effects of wide row spacing and reduced plant density on boll distribution. Studies were conducted to determine how boll distribution is affected by plant density and row spacing. The effects of plant density and row spacing on boll distribution in cotton were investigated in Starkville, MS, on a Leaper silty clay loam (fine, smectitic, nonacid, thermic Vertic Epiaquepts) and in Stoneville, MS, on a Beulah very fine sandy loam (Coarse‐loamy, mixed, active, thermic Typic Dystrudepts). Boll distribution was influenced by row spacing and plant density. As plant density increased regardless of row spacing, a greater percentage of bolls by weight are oriented toward the top of the plant. At a wider row spacing, a greater percentage of total yield occurred at positions 2, 3, 4, and 5.
- 5 September 2025
- Published by Wiley in Agronomy Journal
- Vol. 117 (5)
Cotton response to row pattern and plant density: Part II. Boll distribution
Studies have shown cotton ( Gossypium hirsutum L.) can sustain high yields at various row spacings and plant densities. The ability of cotton to compensate is due to boll distribution. There are numerous studies evaluating the effects of skip‐row production and narrow row spacing on boll distribution. However, very little research is available evaluating the effects of wide row spacing and reduced plant density on boll distribution. Studies were conducted to determine how boll distribution is affected by plant density and row spacing. The effects of plant density and row spacing on boll distribution in cotton were investigated in Starkville, MS, on a Leaper silty clay loam (fine, smectitic, nonacid, thermic Vertic Epiaquepts) and in Stoneville, MS, on a Beulah very fine sandy loam (Coarse‐loamy, mixed, active, thermic Typic Dystrudepts). Boll distribution was influenced by row spacing and plant density. As plant density increased regardless of row spacing, a greater percentage of bolls by weight are oriented toward the top of the plant. At a wider row spacing, a greater percentage of total yield occurred at positions 2, 3, 4, and 5.
- Open Access
- 30 July 2025
- Published by Springer Nature in BMC Plant Biology
- Vol. 25 (1) , 1-14
Intensifying heat stress impacts cotton flowering and boll development efficiency
Cotton-growing regions face heat stress during flowering and boll development, adversely affecting reproductive fitness, yield, and quality. Identifying and incorporating superior physiological and reproductive traits into elite genetic background may improve yield potential under stress. This study quantified the effects of heat stress (36/24 °C, HS) on 25 traits of 16 upland cotton cultivars during the reproductive stage, compared to control conditions (32/24 °C, CNT). Under HS, all cultivars exhibited transpirational cooling, with stomatal conductance increasing by 1-fold and transpiration by 1.6-fold compared to CNT. Under HS, leaf temperature was 3.5 °C higher than CNT plants, and PSII quantum efficiency dropped by 20% compared to CNT. HS also reduced the ratio of reproductive to vegetative dry mass (57%), indicating poor resource partitioning towards reproductive organs. The specific leaf area was increased by 34%, whereas the leaf chlorophyll index dropped by 28% under HS compared with CNT. When exposed to HS, pollen germination was reduced by 71% across cultivars compared to the CNT. While some cultivars maintained similar boll and seed numbers between CNT and HS, a corresponding tolerance was not observed in seed cotton yield. On average, seed cotton yield and lint yield decreased by 19% and 26% under HS, respectively. In contrast, seed yield remained stable, suggesting a disproportionate reduction in intra-boll components. Seed oil content and fiber quality, except for fiber uniformity, displayed susceptibility to HS. Multidimensional responses of cotton cultivars to HS highlight the need to map genetic loci governing heat tolerance. This knowledge is essential for pinpointing effective breeding targets.
- 30 July 2025
- Published by Springer Nature in BMC Plant Biology
- Vol. 25 (1) , 1-14
Open AccessIntensifying heat stress impacts cotton flowering and boll development efficiency
Cotton-growing regions face heat stress during flowering and boll development, adversely affecting reproductive fitness, yield, and quality. Identifying and incorporating superior physiological and reproductive traits into elite genetic background may improve yield potential under stress. This study quantified the effects of heat stress (36/24 °C, HS) on 25 traits of 16 upland cotton cultivars during the reproductive stage, compared to control conditions (32/24 °C, CNT). Under HS, all cultivars exhibited transpirational cooling, with stomatal conductance increasing by 1-fold and transpiration by 1.6-fold compared to CNT. Under HS, leaf temperature was 3.5 °C higher than CNT plants, and PSII quantum efficiency dropped by 20% compared to CNT. HS also reduced the ratio of reproductive to vegetative dry mass (57%), indicating poor resource partitioning towards reproductive organs. The specific leaf area was increased by 34%, whereas the leaf chlorophyll index dropped by 28% under HS compared with CNT. When exposed to HS, pollen germination was reduced by 71% across cultivars compared to the CNT. While some cultivars maintained similar boll and seed numbers between CNT and HS, a corresponding tolerance was not observed in seed cotton yield. On average, seed cotton yield and lint yield decreased by 19% and 26% under HS, respectively. In contrast, seed yield remained stable, suggesting a disproportionate reduction in intra-boll components. Seed oil content and fiber quality, except for fiber uniformity, displayed susceptibility to HS. Multidimensional responses of cotton cultivars to HS highlight the need to map genetic loci governing heat tolerance. This knowledge is essential for pinpointing effective breeding targets.
- Open Access
- 11 March 2025
- Published by Wiley in Agronomy Journal
- Vol. 117 (2)
Economic implications of reduced tillage and cover crops in the irrigated mid‐South
Conservation cropping systems provide many ecosystem service benefits, but must improve or maintain profitability to be economically viable. This study was conducted to determine the sustainability of conservation tillage in continuous cotton (Gossypium hirsutum L.). The effects of subsoil tillage, strip‐tillage, no‐seedbed‐tillage, and cover crops on irrigation costs and overall profitability in comparison with a conventionally tilled control were investigated. The study was located near Stoneville, MS, on a Dubbs silt loam (fine‐silty, mixed, active, thermic Typic Hapludalf) and a Bosket very fine sandy loam (fine‐loamy, mixed, active, thermic Mollic Hapludalf). The lowest costs per hectare were realized when the no‐seedbed‐tillage with winter fallow treatment was used. Using a cover crop reduced irrigation expenses by $18.29 ha−1 compared to the conventionally tilled control (p > F = 4.1 × 10−5). However, revenues were reduced by $279 ha−1 where cover crops were sown (p > F = 0.043), and returns were reduced by $497 ha−1 (p > F = 0.007). The strip‐tillage and no‐seedbed‐tillage systems with winter fallow reduced overall variability of production when compared to the conventional control and treatments with a cover crop. Adopting the no‐seedbed‐tillage with winter fallow system provided the best returns by reducing expenses and lowering variability.
- 11 March 2025
- Published by Wiley in Agronomy Journal
- Vol. 117 (2)
Open AccessEconomic implications of reduced tillage and cover crops in the irrigated mid‐South
Conservation cropping systems provide many ecosystem service benefits, but must improve or maintain profitability to be economically viable. This study was conducted to determine the sustainability of conservation tillage in continuous cotton (Gossypium hirsutum L.). The effects of subsoil tillage, strip‐tillage, no‐seedbed‐tillage, and cover crops on irrigation costs and overall profitability in comparison with a conventionally tilled control were investigated. The study was located near Stoneville, MS, on a Dubbs silt loam (fine‐silty, mixed, active, thermic Typic Hapludalf) and a Bosket very fine sandy loam (fine‐loamy, mixed, active, thermic Mollic Hapludalf). The lowest costs per hectare were realized when the no‐seedbed‐tillage with winter fallow treatment was used. Using a cover crop reduced irrigation expenses by $18.29 ha−1 compared to the conventionally tilled control (p > F = 4.1 × 10−5). However, revenues were reduced by $279 ha−1 where cover crops were sown (p > F = 0.043), and returns were reduced by $497 ha−1 (p > F = 0.007). The strip‐tillage and no‐seedbed‐tillage systems with winter fallow reduced overall variability of production when compared to the conventional control and treatments with a cover crop. Adopting the no‐seedbed‐tillage with winter fallow system provided the best returns by reducing expenses and lowering variability.
- Open Access
- 11 November 2024
- Published by Wiley in Crop, Forage & Turfgrass Management
- Vol. 10 (2)
Planting time and variety effects on biomass, harvest index, and yield of irrigated soybean in mid‐Southern United States
Soybean [Glycine max (L.) Merr.] biomass and grain yield has increased over the past several decades in the mid‐southern United States. This is attributable to technological advances and improved management strategies. However, a better understanding of biomass accumulation and partitioning is needed to improve our knowledge base of varietal growth habits relative to yield, planting date, and harvest index (HI). Field experiments within a split plot arrangement in a randomized complete block design were established in 2017 and 2018 in Stoneville, MS. The study aimed to evaluate the effect of early (late‐April or mid‐May) and late (late‐May) planting on biomass, HI, and yield amongst eight soybean varieties. Soybean total biomass accumulation was collected at multiple development stages, including V4, R2, mid R5, mid R6, and R8, and partitioned into senesced leaves, pods, and seeds. Overall, the planting date had no effect on yield, HI, and biomass accumulation at any of the growth stages. Yet, the interaction between planting date and variety significantly affected biomass accumulation at the mid R5 stage. Contrarily, the variety selection significantly affected yield, HI, and biomass accumulation at all growth stages except mid R6. The total biomass accumulation at R8 was greatest for Asgrow 46X6, Asgrow 4632, Terral 4857X, Terral 48A76, and Credenz 4748, when pooled over planting dates. Averaged across two planting dates, the greatest yield was produced by Terral 48A76, Asgrow 4632, and Asgrow 46X6. Furthermore, averaged across site‐years, HI was greatest for Asgrow 4632 and Terral 48A76. Based on the results of this study, evaluating soybean HI rather than overall biomass accumulation may be more beneficial for variety selection decisions.
- 11 November 2024
- Published by Wiley in Crop, Forage & Turfgrass Management
- Vol. 10 (2)
Open AccessPlanting time and variety effects on biomass, harvest index, and yield of irrigated soybean in mid‐Southern United States
Soybean [Glycine max (L.) Merr.] biomass and grain yield has increased over the past several decades in the mid‐southern United States. This is attributable to technological advances and improved management strategies. However, a better understanding of biomass accumulation and partitioning is needed to improve our knowledge base of varietal growth habits relative to yield, planting date, and harvest index (HI). Field experiments within a split plot arrangement in a randomized complete block design were established in 2017 and 2018 in Stoneville, MS. The study aimed to evaluate the effect of early (late‐April or mid‐May) and late (late‐May) planting on biomass, HI, and yield amongst eight soybean varieties. Soybean total biomass accumulation was collected at multiple development stages, including V4, R2, mid R5, mid R6, and R8, and partitioned into senesced leaves, pods, and seeds. Overall, the planting date had no effect on yield, HI, and biomass accumulation at any of the growth stages. Yet, the interaction between planting date and variety significantly affected biomass accumulation at the mid R5 stage. Contrarily, the variety selection significantly affected yield, HI, and biomass accumulation at all growth stages except mid R6. The total biomass accumulation at R8 was greatest for Asgrow 46X6, Asgrow 4632, Terral 4857X, Terral 48A76, and Credenz 4748, when pooled over planting dates. Averaged across two planting dates, the greatest yield was produced by Terral 48A76, Asgrow 4632, and Asgrow 46X6. Furthermore, averaged across site‐years, HI was greatest for Asgrow 4632 and Terral 48A76. Based on the results of this study, evaluating soybean HI rather than overall biomass accumulation may be more beneficial for variety selection decisions.
- Open Access
- 28 September 2024
- Published by Wiley in Agronomy Journal
- Vol. 116 (6) , 2967-2975
Effect of cotton seed size and seeding density on cotton growth, development, and yield
Interest in cotton seed size and seeding density exists due to increased seeding cost and overall decreased seed size of cotton varieties. An experiment was conducted in 2019 and 2020 in Jackson, TN, Starkville, MS, and Brooksville, MS, to determine the impact of seed size, seeding density, and variety on cotton plant development and yield. Early‐season seedling vigor was impacted by seeding density and seed size. Larger seeds and higher seeding densities produced the greatest seedling vigor. Fresh weight biomass was also impacted by seed size, as larger seed produced greater fresh and dry cotton plant biomass when pooled over seeding density and variety. The greatest seed cotton yields were obtained from planting larger seed, higher seeding densities, and from ‘DP 1646 B2XF’. Cotton variety and seeding density influenced financial returns and fiber quality. ‘NexGen 3406 B2XF’ planted at 148,200 seeds ha−1 resulted in the lowest micronaire. Net returns were not influenced by seed size or seeding density; therefore, depending on seed costs, increasing seeding densities may not be beneficial.
- 28 September 2024
- Published by Wiley in Agronomy Journal
- Vol. 116 (6) , 2967-2975
Open AccessEffect of cotton seed size and seeding density on cotton growth, development, and yield
Interest in cotton seed size and seeding density exists due to increased seeding cost and overall decreased seed size of cotton varieties. An experiment was conducted in 2019 and 2020 in Jackson, TN, Starkville, MS, and Brooksville, MS, to determine the impact of seed size, seeding density, and variety on cotton plant development and yield. Early‐season seedling vigor was impacted by seeding density and seed size. Larger seeds and higher seeding densities produced the greatest seedling vigor. Fresh weight biomass was also impacted by seed size, as larger seed produced greater fresh and dry cotton plant biomass when pooled over seeding density and variety. The greatest seed cotton yields were obtained from planting larger seed, higher seeding densities, and from ‘DP 1646 B2XF’. Cotton variety and seeding density influenced financial returns and fiber quality. ‘NexGen 3406 B2XF’ planted at 148,200 seeds ha−1 resulted in the lowest micronaire. Net returns were not influenced by seed size or seeding density; therefore, depending on seed costs, increasing seeding densities may not be beneficial.
- Open Access
- 17 January 2024
- Published by Wiley in Agronomy Journal
- Vol. 116 (2) , 563-571
Agroeconomic differences among alternative cotton row spacings and row patterns
Crop growth and development is affected by intraspecies competition. This study was conducted to determine whether cotton productivity and profitability could be manipulated through planting geometry. The effects of row spacing, planting pattern, and variety on cotton fruit distribution, yield, and net returns were investigated near Bella Mina, AL, on a Decatur silt loam (fine, kaolinitic, thermic Rhodic Paleudults); Jackson, TN, on a Calhoun silt loam (fine‐silty, mixed, active, thermic Typic Glossaqualfs); Starkville, MS, on a Leeper silty clay loam (fine, smectitic, nonacid, thermic Vertic Epiaquepts); and Stoneville, MS, on a Bosket very fine sandy loam (fine‐loamy, mixed, active, thermic Mollic Hapludalfs). For both the 76‐ and 97‐cm row spacing, transitioning from a solid to a 2 × 1 skip row pattern reduced cotton lint yield by 19%. Reduced lint yield in the 2 × 1 skip row pattern was attributed primarily to a 7% decrease in the number of Zone 1 and first‐position bolls. Consequently, planting on a solid rather than skip row pattern increased net returns by 21%. Planting cotton in either 76‐ or 97‐cm rows using a solid rather than skip row pattern likely increases crop productivity and profitability across the US cotton belt.
- 17 January 2024
- Published by Wiley in Agronomy Journal
- Vol. 116 (2) , 563-571
Open AccessAgroeconomic differences among alternative cotton row spacings and row patterns
Crop growth and development is affected by intraspecies competition. This study was conducted to determine whether cotton productivity and profitability could be manipulated through planting geometry. The effects of row spacing, planting pattern, and variety on cotton fruit distribution, yield, and net returns were investigated near Bella Mina, AL, on a Decatur silt loam (fine, kaolinitic, thermic Rhodic Paleudults); Jackson, TN, on a Calhoun silt loam (fine‐silty, mixed, active, thermic Typic Glossaqualfs); Starkville, MS, on a Leeper silty clay loam (fine, smectitic, nonacid, thermic Vertic Epiaquepts); and Stoneville, MS, on a Bosket very fine sandy loam (fine‐loamy, mixed, active, thermic Mollic Hapludalfs). For both the 76‐ and 97‐cm row spacing, transitioning from a solid to a 2 × 1 skip row pattern reduced cotton lint yield by 19%. Reduced lint yield in the 2 × 1 skip row pattern was attributed primarily to a 7% decrease in the number of Zone 1 and first‐position bolls. Consequently, planting on a solid rather than skip row pattern increased net returns by 21%. Planting cotton in either 76‐ or 97‐cm rows using a solid rather than skip row pattern likely increases crop productivity and profitability across the US cotton belt.
- Open Access
- 25 October 2023
- Published by Wiley in Agronomy Journal
- Vol. 115 (6) , 3045-3061
Reevaluation of the degree day base 60°F concept in US cotton (Gossypium hirsutum L.) production
Cotton (Gossypium hirsutum L.) management decisions to abet early growth, fruit set, boll maturation, and harvest preparation are often facilitated by prediction of the date when critical developmental stages are reached. In the United States, growing degree days calculated with a base 60°F (DD60s) are commonly used to predict cotton development. Observations suggest development of modern cultivars differs from previously established guidelines. The objectives were to (1) reevaluate DD60s required for an early, mid‐maturing and late maturing cultivar to reach key growth stages across the US Cotton Belt; and (2) determine if predictions of growth stages are strengthened by optimizing base temperature or including an upper threshold by growth stage. During 2018 and 2019, 22 field trials were established in 10 states. Plant growth stages were monitored weekly and air temperature was computed from interpolated surface observations weighted by a physical, geographic model. Observed DD60s to reach growth stages varied slightly by cultivar and region (≤85 DD60s and ≤130 DD60s, respectively). Required DD60s to reach growth stages exceeded most published ranges. Optimization of base temperature and inclusion of an upper threshold by growth stage did not substantially decrease errors in predicting date of growth stage occurrence. The DD55 and DD55 with an upper threshold of 86°F calculations resulted in slightly lower errors in predicting date of growth stage occurrence than the DD60 calculation. Although guidelines should be updated, it is unlikely slight modification in base temperature or upper thresholds will drastically increase the predictive ability over the DD60 calculation.
- 25 October 2023
- Published by Wiley in Agronomy Journal
- Vol. 115 (6) , 3045-3061
Open AccessReevaluation of the degree day base 60°F concept in US cotton (Gossypium hirsutum L.) production
Cotton (Gossypium hirsutum L.) management decisions to abet early growth, fruit set, boll maturation, and harvest preparation are often facilitated by prediction of the date when critical developmental stages are reached. In the United States, growing degree days calculated with a base 60°F (DD60s) are commonly used to predict cotton development. Observations suggest development of modern cultivars differs from previously established guidelines. The objectives were to (1) reevaluate DD60s required for an early, mid‐maturing and late maturing cultivar to reach key growth stages across the US Cotton Belt; and (2) determine if predictions of growth stages are strengthened by optimizing base temperature or including an upper threshold by growth stage. During 2018 and 2019, 22 field trials were established in 10 states. Plant growth stages were monitored weekly and air temperature was computed from interpolated surface observations weighted by a physical, geographic model. Observed DD60s to reach growth stages varied slightly by cultivar and region (≤85 DD60s and ≤130 DD60s, respectively). Required DD60s to reach growth stages exceeded most published ranges. Optimization of base temperature and inclusion of an upper threshold by growth stage did not substantially decrease errors in predicting date of growth stage occurrence. The DD55 and DD55 with an upper threshold of 86°F calculations resulted in slightly lower errors in predicting date of growth stage occurrence than the DD60 calculation. Although guidelines should be updated, it is unlikely slight modification in base temperature or upper thresholds will drastically increase the predictive ability over the DD60 calculation.