OMOleksandr Murashchenko

Oleksandr Murashchenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Oleksandr Murashchenko has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Combined architecture of an analog-to-digital converter with balanced throughput–cost trade-off

    by Oleksiy Azarov, Oleksandr Dudnyk, Maksym Obertiukh, Oleksandr Lukashuk, Oleksandr Murashchenko

    The object of research in this article is a combined architecture of analog-to-digital converters (ADCs), which is built by integrating a low-resolution flash ADC with a successive approximation register (SAR) ADC. Flash ADCs provide extremely high conversion speeds but suffer from a significant drawback: the resolution cost per bit increases exponentially with increasing bit depth. In contrast, SAR ADCs are characterized by low cost per bit, but their inherently sequential conversion mechanism limits their conversion speed. This study investigates a combined ADC architecture designed to effectively merge the advantages of flash and SAR ADCs, thereby maximizing economic efficiency per resolution bit. The core hypothesis is that using a flash ADC of relatively low resolution for initial rapid coarse conversion, followed by a SAR ADC for precise computation of the residual analog signal, can significantly reduce the overall cost of implementing high-resolution ADCs. The research objectives include analyzing the characteristics of flash and SAR ADCs, determining the optimal combination of their respective resolutions, developing the operational algorithm of the proposed combined ADC, creating a mathematical model in MATLAB Simulink, and evaluating its technical and economic performance. The results demonstrate that the optimal combination is a flash ADC with a resolution of 4–5 bits paired with an 8–10-bit SAR ADC. This configuration significantly lowers the cost per bit compared with traditional high-resolution flash ADCs while maintaining a considerably higher conversion speed compared with SAR ADCs of equivalent resolution. The simulation results indicated that integral nonlinearity (INL) and differential nonlinearity (DNL) values of the proposed ADC did not exceed ±0.5 LSB, confirming high conversion accuracy. In addition, we show that the energy-per-conversion figure remains unchanged relative to pure flash and pure SAR solutions in isolation. Furthermore, the economic analysis demonstrated that the proposed combined approach minimizes the implementation costs per unit of resolution. Conclusions. The proposed combined ADC architecture demonstrates substantial economic benefits compared with conventional flash ADCs and notably improved speed characteristics compared with SAR ADCs. The resolution distribution between flash and SAR components efficiently balances economic and technical requirements. Further studies should focus on the practical implementation of the proposed ADC architecture, noise impact analysis, and adaptive resolution management strategies.

  • Open Access

    ІНФОРМАЦІЙНА СИСТЕМА МОНІТОРИНГУ ПСИХОЛОГІЧНОГО СТАНУ ВІЙСЬКОВИХ ІЗ ПОСТТРАВМАТИЧНИМ СТРЕСОВИМ РОЗЛАДОМ ЗАСОБАМИ AI

    by Анжеліка Азарова, Максим Шершун, Олександр Муращенко, Ольга Рузакова

    У статті представлено інформаційну систему моніторингу психологічного стану військовослужбовців, які страждають на посттравматичний стресовий розлад. Система реалізована на платформі iOS та використовує великі мовні моделі (LLM) штучного інтелекту GPT-4, інтегровані через CoreML для оброблення відповідей користувача, а також платформу HealthKit для збору фізіологічних даних. Розроблено структурну схему архітектури цієї ІС та відповідний метод формалізації математичної моделі оцінювання стану військових засобами AI. Основним науковим результатом є математична модель, яка, на відміну від існуючих підходів, дозволяє засобами штучного інтелекту та розробленої інформаційної системи підвищити точність та швидкість виявлення ознак ПТСР та адаптивність інтерфейсу до військових потреб.

  • Open Access

    ПРОГРАМНО-АПАРАТНИЙ КОМПЛЕКС ДЛЯ ЗАБЕЗПЕЧЕННЯ АВТОМАТИЗОВАНОГО КЕРУВАННЯ АВТОМОБІЛЕМ ЗАСОБАМИ НЕЙРОМЕРЕЖЕВОГО МОДЕЛЮВАННЯ ТА ГЕНЕТИЧНИХ АЛГОРИТМІВ

    by Владислав Хорошун, Анжеліка Азарова, Олександр Муращенко, Ірина Зоря

    У статті представлено програмно-апаратний комплекс для забезпечення автопілотажу засобами нейромережевого моделювання та генетичних алгоритмів. У комплексі використано бібліотеку YOLO v6 для розпізнавання об'єктів у реальному часі та для подальшого прийняття рішень щодо ситуації на дорозі авторами запропоновано використання багатошарового перцептрону, для оптимізації навчання якого було застосовано генетичний алгоритм, що дозволило суттєво зменшити тривалість його навчання. Розроблена система використовує DirectX 11 для передавання зображень із будь-якої камери, що дозволяє інтегрувати різноманітні візуальні джерела даних. Основний науковий результат полягає в тому, що запропоновано удосконалений підхід до автоматичного управління автомобілем із використанням багатошарового перцептрону, прискорене навчання якого відбувається засобами генетичного алгоритму, що уможливлює значне зростання продуктивності системи.

  • Open Access

    Перетворювачі інтегральних сигналів пристроїв вимірювально-діагностичних температурних сенсорів для біомедичних застосувань

    by О. Осадчук, В. Вуйцік, Р. Голяка, О. Мозговий, О. Муращенко

    У матеріалах статті наведено результати дослідження, що є перспективним напрямом у побудові високолінійних аналогових пристроїв для систем вимірювання, реєстрації та обробки сигналів біомедичних застосувань для використання двотактних структур. Незважаючи на різноманітність існуючих моделей високолінійних пристроїв виробництва провідних всесвітньо відомих компаній, зокрема, Analog Devices, National Semiconductor, Texas Instruments, Linear Technology, ON Semiconductor, Philips, Inetrsil, існують можливості подальшого вдосконалення їх характеристик. У роботі аналізуються кола первинного перетворення високочутливих диференційних сенсорів температури на транзисторних структурах та визначаються оптимальні режими роботи диференційних транзисторних каскадів сенсорів різницевої температури для пристроїв біомедичного призначення. Розробники аналого-цифрових систем часто стикаються з проблемою вибору підсилювача, що працює з малими похибками передачі постійного рівня. Проблема узгодження сигналів також залишається в центрі уваги розробників, оскільки в сучасних ЦАП як ВАХ використовується схема комутації ОА, а для ЦАП з виходом напруги VB і VVC використовуються схеми комутації. Ефективним підходом до побудови подібних аналогових пристроїв є використання трансімпедансних підсилювачів. Вони поєднують в собі як високі лінійні параметри постійного струму, так і ефективні характеристики змінного посилення сигналу. Поряд з освоєнням нових мікроелектронних технологій виготовлення теплових сенсорів потоку, зокрема на основі MEMs-структур, подальший розвиток цих сенсорів для задач медичної діагностики є перспективним і розв’язує задачу підвищення ефективності параметрів сигнальних перетворювачів.

  • Open Access

    OPTIMIZATION OF PARTS CUTTING PROCESS PARAMETERS WORKING IN CONDITIONS OF CYCLIC LOADS

    by Kateryna Barandych, Sergii Vysloukh, Grygoriy Tymchyk, Oleksandr Murashchenko, Saule Smailova, Saule Kumargazhanova

    The paper is devoted to questions of technological fatigue life assurance of parts working in conditions of cyclic loads by optimization their cutting conditions for finish turning process. In order to solve the task of optimizing the parts cutting conditions, the corresponding software, based on the previously created mathematical model of the finishing turning process, was developed in the C# programming language. With the purpose of technological providing the necessary fatigue life of the part, taking into account the real conditions of its operation for the maximum productivity of the finishing turning process, the methodical recommendations for determining the optimal parts cutting conditions at the phase of production technological preparation are given. An example application of the proposed solution is presented.