VSVincent Sambou

Vincent Sambou

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Vincent Sambou has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    RULE-BASED ENERGY MANAGEMENT OF A STANDALONE PV-BATTERY SYSTEM UNDER ONE-MONTH SOLAR RESOURCE VARIABILITY: A CASE STUDY IN SENEGAL

    by Souleymane Soumah, Mouhamadou Falilou Ndiaye, Mohamed Ansoumane Camara, Mohamed Lamine Toure, Kadiatou Aissatou Barry, Vincent Sambou

    Energy management is a key factor in the reliability and performance of photovoltaic (PV) systems coupled with battery storage for rural electrification. Unlike studies based on representative days, this work investigates the operation of a PV–battery system over a continuous 28-day period (672 h) to assess the influence of day-to-day weather variations on its behaviour. The system consists of a 36.6 kWp PV generator, a battery storage system (648 Ah, 200 V), and a bidirectional buck–boost converter exchanging energy between the DC bus and the batteries. Simulations were carried out in MATLAB/Simulink using hourly solar irradiation and temperature profiles measured in Senegal in February 2005, and a domestic load profile. Maximum power point tracking is performed with the incremental conductance algorithm, while a PI controller maintains the DC bus voltage at its 395 V reference. A rule-based energy management strategy coordinates PV generation, storage and load supply according to the instantaneous power balance and the battery state of charge (SOC). Results show that the DC bus voltage remains globally close to its reference despite fluctuations in solar irradiation, apart from a transient drop to about 260 V around 275 h. The battery SOC stays close to 50% over the whole month, indicating stable operation of the strategy under the simulated conditions. This study provides a basis for analysing the sizing and operation of PV–battery systems in the sub-Saharan African context.

  • Open Access

    INFLUENCE OF TANK SIZE ON THE TECHNO-ECONOMIC SIZING OF A PHOTOVOLTAIC WATER PUMPING SYSTEM: A HYBRID ARTIFICIAL INTELLIGENCE APPROACH APPLIED TO THE SAHEL (SAKAL, SENEGAL)

    by Souleymane Soumah, Mouhamadou Falilou Ndiaye, Mohamed Ansoumane Camara, Diatta Sene, Kadiatou Aissatou Barry, Vincent Sambou

    In rural Sahelian areas, access to water relies heavily on battery-less photovoltaic (PV) pumping, in which the tank acts as the storage element. Its volume, however, is most often set by autonomy rules of one to three days, which are unrelated to the installed power and to the variability of solar radiation. This paper quantifies the influence of this volume on techno-economic sizing using a hybrid chain that combines a Gradient Boosting power model, a climate-sequence generator based on typical day types and a Markov chain, a surrogate model (neural networks and Gradient Boosting), and a genetic algorithm with an uncertainty margin, with verification by simulation. The case study concerns Sakal (Louga, Senegal, Sahelian climate) and uses three days measured in 2020 at a 15-min time step. For a demand of 400 m³/day, a head of 40 m, and a tolerated deficit of 5 %, the optimum is a 225 m³ tank (0.56 day of autonomy) with 23 kWp, at 0.108 USD/m³. Autonomy rules of one, two, and three days raise the cost of water by 34, 112, and 183 %. Without a tank, the deficit exceeds 52 % regardless of the PV power. The optimal autonomy remains between 0.50 and 0.59 day across 17 sensitivity scenarios. These results depend on the assumed unit costs and on a limited set of measurements; their validation on multi-year local data is necessary.

  • Thermo-physical characterization of sesame stalk fibers for future use in bio-composite materials

    by Elhadji Dieng, Stéphane Hans, Mactar Faye, Vincent Sambou

    In response to the challenges posed by climate change and growing urbanization, the construction sector is under increasing pressure to reduce its environmental footprint. Plant-based insulation materials offer a sustainable alternative to conventional solutions due to their low cost, renewability, and carbon-neutral life cycle. Among these, sesame (Sesamum indicum L.) is widely cultivated in Senegal, yet its fibrous by-products are largely underutilized. This study investigates the thermo-physical properties of sesame fibers to assess their suitability for use in eco-friendly building insulation materials. Physical characterization included particle size distribution, moisture content, water absorption, solubility, bulk density, and sorption–desorption behavior. Thermal performance was evaluated through thermal conductivity and effusivity measurements using the hot-wire method. Results show that sesame fibers are highly porous, with an average bulk density of 101.13 kg/m 3 , and exhibit strong hydrophilic behavior, absorbing up to ∼300% of their dry mass. Their moisture content ranged from 11% to 12%, and solubility was minimal (−1 .K −1 , increasing with bulk density. These values are comparable to those of other natural insulators such as hemp and Typha, based on the literature. The findings confirm the potential of sesame fibers as a low-cost, locally available, and environmentally sustainable alternative for the production of bio-composites materials.

  • Open Access

    Energy Management of PV-Battery Systems for Rural Microgrids and Agricultural Water Pumping Applications in Senegal

    by Souleymane Soumah, Mouhamadou Ndiaye, Mohamed Camara, Vincent Sambou

    This work proposes an optimized energy management strategy for a photovoltaic (PV) system coupled with batteries, intended for both rural electrification and agricultural pumping applications. The approach takes into account photovoltaic generation, battery storage and demand management to ensure a balance between domestic needs and irrigation requirements. For the MPPT of PVs with an installed power of 36.6 kWp, we used the conductance increment algorithm (Inc) to provide the PV current reference and the power transfer to the DC bus was provided via a Boost chopper. To ensure the stability of the DC bus voltage, a PI regulator is dimensioned and a management algorithm is developed to control the Buck-Boost coupled to the grid. This algorithm makes it possible to store the excess PV production in the battery pack and to return them in the event of a deficit through the bidirectional converter. In addition, the proposed strategy ensures coordinated operation between generation, storage, and agricultural pumping in order to guarantee the continuity of supply under varying climatic and load conditions. The simulation results highlight the potential of PV-battery microgrids to reduce reliance on diesel, improve access to water for agriculture, and strengthen the sustainability of rural communities. The findings demonstrate that the proposed system achieves stable voltage regulation, efficient energy allocation, and improved autonomy for isolated sites. The study thus proposes a framework that can be replicated in similar contexts in sub-Saharan Africa, simultaneously contributing to energy access and food security.


  • Open Access

    Evaluation of the Wind Energy Potential of Guinea's Administrative Regions

    by Saidou Barry, Mohamed Aidara, Ansoumane Sakouvogui, Vincent Sambou

    In this article, we assess the wind potential of the different administrative regions of Guinea. To do this, we use data from national weather stations covering a period of six years (2010–2015). The measurements were recorded every hour at a height of 10 meters above the ground. The analysis focuses on the characteristics of the average wind speed at different temporalities: monthly, annual and interannual. In order to model the velocity distributions, the data were fitted according to Weibull's law, and the shape and scale parameters were determined for each region. In addition, the study of the compass rose made it possible to identify the dominant directions and their associated frequencies in all the territories examined. The results indicate that the Conakry region has the highest wind potential, with average speeds above 3.5 m/s and an estimated power density of around 27 W/m². Analyses of wind characteristics reveal that August stands out as the most favourable month for wind energy development in all regions, while November has the least windy conditions. Statistically, the dominant wind directions vary according to the area: in Middle Guinea, Upper Guinea and Forest Guinea, the winds are mainly north-east and south-west, which reflects a significant spatial variability in air flows. On the other hand, in the Lower Guinea region, the wind shows an almost unidirectional trajectory, oriented from the southwest. In summary, the study highlights a marked regional disparity in Guinea's wind potential, with Conakry as the main attractive area for the development of wind capacity, supported by directional patterns and seasonal variability that guide operational and planning choices. These results provide a robust quantitative basis to guide investments and strategies for the deployment of wind technologies in the country.

  • Open Access

    Thermophysical characterization of concrete reinforced with baobab trunk fibers (Adansonia digitata L.) for thermal insulation of buildings

    by Alphousseyni Ghabo, Pape Moussa Touré, Younouss Diéye, Vincent Sambou, Kheur Momar Sarr-Dakar-Senegal Touré, Kheur Momar Sarr-Dakar-Senegal Sambou

    This work deals with characterizing concrete based on baobab trunk fibers for thermal in- sulation in buildings. The aim is to study the effect of the fiber content and the type of fiber treatment on the hygroscopic and thermo-physical properties of the concrete. Therefore, two types of treatment were carried out: an alkaline treatment and a thermo-alkaline treatment. Hygroscopic test results (34.25% to 54.92% for fiber content ranging from 14% to 28%) show that adding fibers to concrete makes them more sensitive to water. However, thermochemical treatment of the fibers reduces this water sensitivity. The thermal conductivities of concrete range from 0.202 to 0.086 W/m.K for the same fiber content. These results show that these biomaterials can be used in construction to improve building insulation.


  • Open Access

    CFD modelling of the microclimate of a cultivated greenhouse: A validation study between experimental and numerical results

    by Soumaïla Tigampo, Sami Kooli, Nizar Ben Salah, Walid Foudhil, Reda Errais, Sadok Ben Jabrallah, Vincent Sambou

    In this work, we present the validation of a numerical model of a greenhouse thermally in-sulated on three sides with a tomato crop. A CFD software (Ansys-Fluent) was used to solve the numerical model. The discrete ordinate model was included to solve the radiative trans-fer equation. The results of the numerical model were compared with the values of air tem-perature observations at different points in the greenhouse. Good agreement was obtained between the simulated and measured values, with coefficients of determination R2 = 0.77, R2 = 0.84, R2 = 0.99, and R2 = 0.89 for the temperatures of the points 10 cm, 80 cm, and 210 cm above the ground and the average temperature in the greenhouse, respectively. A third-order polynomial curve was drawn between the simulated and measured values of relative humidity in the greenhouse. These R2 values are 0.9786 and 0.7165, the simulated and measured relative humidity, respectively. The simulation results showed low velocity values with an average of 0.525 m/s located between 1.5 m and 2 m from the ground.


  • Open Access

    Dynamic investigation of the diffusion absorption refrigeration system NH3-H2O-H2

    by Mohamed Izzedine Serge Adjibade, Ababacar Thiam, Christophe Awanto, Baye A. Ndiogou, Vincent Sambou