Charikleia D. Stoura
Charikleia D. Stoura has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Eleni Chatzi
ETH Zurich
5 shared publications - Vasilis Dertimanis
ETH Zurich
3 shared publications - Alfredo Cigada
Politecnico di Milano
1 shared publication - Claudia Kossmann
Infrastructure–Facilities & Technology-Track Swiss Federal Railways (SBB AG) Hilfikerstrasse 3 Bern 3000 Switzerland
1 shared publication - Cyprien Hoelzl
ETH Zurich
1 shared publication Eleni N. Chatzi
1 shared publication
Latest Publications
- Open Access
- 16 September 2025
- Published by Elsevier in Mechanical Systems and Signal Processing
- Vol. 239
Identification of railway bridge modal properties based solely on acceleration data from traversing trains
- 16 September 2025
- Published by Elsevier in Mechanical Systems and Signal Processing
- Vol. 239
Open AccessIdentification of railway bridge modal properties based solely on acceleration data from traversing trains
- Open Access
- 26 December 2024
- Published by Elsevier in Mechanical Systems and Signal Processing
- Vol. 225
Model-based Imitation Learning from Observation for input estimation in monitored systems
- 26 December 2024
- Published by Elsevier in Mechanical Systems and Signal Processing
- Vol. 225
Open AccessModel-based Imitation Learning from Observation for input estimation in monitored systems
- 23 August 2024
- Published by Springer Nature
- p. 83-89
Identification of Railway Bridge Modal Properties via Acceleration Data from Traversing Trains
- 23 August 2024
- Published by Springer Nature
- p. 83-89
Identification of Railway Bridge Modal Properties via Acceleration Data from Traversing Trains
- Open Access
- 29 December 2023
- Published by Wiley in Structural Control and Health Monitoring
- Vol. 2023, 1-18
A Model-Based Bayesian Inference Approach for On-Board Monitoring of Rail Roughness Profiles: Application on Field Measurement Data of the Swiss Federal Railways Network
According to the International Union of Railways, railway networks count more than one million kilometers of tracks worldwide, a number that is to rise further as the goal is to promote rail transportation as a sustainable means to face the challenge of increased mobility. However, such a vast expansion further necessitates efficient and reliable infrastructure monitoring schemes able to guarantee the quality and safety of rail transportation. Traditional monitoring approaches, relying on visual inspection and portable measuring devices, cannot rise to the task as they do not allow for continuous inspection of extended portions of rail infrastructure. Therefore, mobile monitoring methodologies based on dedicated diagnostic vehicles have emerged as an alternative. Despite revolutionizing traditional monitoring methods, such vehicles are usually expensive and can only operate under the suspension of regular rail service. In this work, we propose an alternative approach for mobile sensing of railway infrastructure based on on-board monitoring data collected from low-cost vibration sensors, e.g., accelerometers, which can be mounted on in-service trains. Specifically, we focus on identifying the roughness profile of the tracks and propose a fusion of reduced-order vehicle models with a Bayesian inference approach for joint input-state estimation. To enhance the inference, we opt for a prior updating of the vehicle model parameters on the basis of an unscented Kalman filter and available measurements from a diagnostic vehicle. The key contributions of this work are (i) the consideration of the dynamic interaction between trains and tracks, which is usually ignored in rail roughness estimation, (ii) the adoption of reduced train vehicle models that decrease the computational effort of the identification task, (iii) the updating of the vehicle parameters to account for inconsistencies in the model used, and (iv) the application of the proposed methodology to actual acceleration measurements collected from a diagnostic vehicle of the Swiss Federal Railways network.
- 29 December 2023
- Published by Wiley in Structural Control and Health Monitoring
- Vol. 2023, 1-18
Open AccessA Model-Based Bayesian Inference Approach for On-Board Monitoring of Rail Roughness Profiles: Application on Field Measurement Data of the Swiss Federal Railways Network
According to the International Union of Railways, railway networks count more than one million kilometers of tracks worldwide, a number that is to rise further as the goal is to promote rail transportation as a sustainable means to face the challenge of increased mobility. However, such a vast expansion further necessitates efficient and reliable infrastructure monitoring schemes able to guarantee the quality and safety of rail transportation. Traditional monitoring approaches, relying on visual inspection and portable measuring devices, cannot rise to the task as they do not allow for continuous inspection of extended portions of rail infrastructure. Therefore, mobile monitoring methodologies based on dedicated diagnostic vehicles have emerged as an alternative. Despite revolutionizing traditional monitoring methods, such vehicles are usually expensive and can only operate under the suspension of regular rail service. In this work, we propose an alternative approach for mobile sensing of railway infrastructure based on on-board monitoring data collected from low-cost vibration sensors, e.g., accelerometers, which can be mounted on in-service trains. Specifically, we focus on identifying the roughness profile of the tracks and propose a fusion of reduced-order vehicle models with a Bayesian inference approach for joint input-state estimation. To enhance the inference, we opt for a prior updating of the vehicle model parameters on the basis of an unscented Kalman filter and available measurements from a diagnostic vehicle. The key contributions of this work are (i) the consideration of the dynamic interaction between trains and tracks, which is usually ignored in rail roughness estimation, (ii) the adoption of reduced train vehicle models that decrease the computational effort of the identification task, (iii) the updating of the vehicle parameters to account for inconsistencies in the model used, and (iv) the application of the proposed methodology to actual acceleration measurements collected from a diagnostic vehicle of the Swiss Federal Railways network.
- Open Access
- 12 September 2023
- Published by DEStech Publications
RAIL ROUGHNESS IDENTIFICATION VIA ON-BOARD ACCELERATION DATA AND BAYESIAN FILTERING
The global demand for transportation has resulted in extensive expansion of railway networks. However, ensuring the safety, reliability, and efficiency of these rapidly expanding railway infrastructures requires monitoring of their structural health. Focusing on tracks, traditional visual inspections and portable measuring devices are commonly used to gather geometric data for diagnosing and predicting track defects. In recent years, railway operators worldwide have employed specialized diagnostic vehicles equipped with optical and inertial sensors to collect track data and assess its condition. This approach has revolutionized rail condition assessment by introducing a mobile data acquisition platform for track inspection. Nevertheless, deploying these specialized vehicles disrupts regular rail service, limiting their frequency of operation and the continuous collection of rail data. To address this limitation, this study explores an on-board monitoring (OBM) method that focuses on collecting vibration data from traveling trains. The proposed methodology involves gathering acceleration data from axle boxes of trains running at normal speeds. What sets this approach apart is its use of realistic train models and the consideration of the dynamic interaction between the trains and tracks, which is typically oversimplified. The train model employed is simplified to reduce computational requirements. The identification process relies on sequential Bayesian inference for joint input and state estimation. By estimating the input, the relevant rail roughness profile can be identified, thereby providing information on the presence of isolated defects, such as welded joints and squats, along the track system.
- 12 September 2023
- Published by DEStech Publications
Open AccessRAIL ROUGHNESS IDENTIFICATION VIA ON-BOARD ACCELERATION DATA AND BAYESIAN FILTERING
The global demand for transportation has resulted in extensive expansion of railway networks. However, ensuring the safety, reliability, and efficiency of these rapidly expanding railway infrastructures requires monitoring of their structural health. Focusing on tracks, traditional visual inspections and portable measuring devices are commonly used to gather geometric data for diagnosing and predicting track defects. In recent years, railway operators worldwide have employed specialized diagnostic vehicles equipped with optical and inertial sensors to collect track data and assess its condition. This approach has revolutionized rail condition assessment by introducing a mobile data acquisition platform for track inspection. Nevertheless, deploying these specialized vehicles disrupts regular rail service, limiting their frequency of operation and the continuous collection of rail data. To address this limitation, this study explores an on-board monitoring (OBM) method that focuses on collecting vibration data from traveling trains. The proposed methodology involves gathering acceleration data from axle boxes of trains running at normal speeds. What sets this approach apart is its use of realistic train models and the consideration of the dynamic interaction between the trains and tracks, which is typically oversimplified. The train model employed is simplified to reduce computational requirements. The identification process relies on sequential Bayesian inference for joint input and state estimation. By estimating the input, the relevant rail roughness profile can be identified, thereby providing information on the presence of isolated defects, such as welded joints and squats, along the track system.