Gong Cheng

In aerospace technology, angular contact ball bearings are required to exhibit extremely high operational precision, necessitating real-time monitoring of their wear status to conduct pre-failure analysis. Although extensive studies have been conducted on the wear characteristics of angular contact bearings, further in-depth research is still required to enhance the accuracy of bearing life predictions. To address the imprecision in wear life prediction for angular contact ball bearings, this article proposes a refined wear calculation model based on dynamic load distribution. The model calculates the dynamic load distribution between the inner and outer rings and the raceway under mixed lubrication conditions. Integrating the dynamic load distribution methodology with the wear calculation model, the dynamic contact characteristics of angular contact bearings can be more accurately characterized. Building on this foundation, a dynamic analysis model considering dynamic wear in the bearing contact zone is established. The vibration characteristics of bearings under varying loads are analyzed, and vibration experiments under different load conditions are conducted. Through vibration spectrum analysis, the influence patterns of wear characteristic frequency bands in the wear model on the pre-failure state of bearings are further elucidated. This study provides a theoretical basis for bearing wear life prediction analysis.

Based on mixed lubrication analysis, considering the influence of rough interface contact stiffness, contact damping, and interface friction on the gear transmission system, the relationship between interface contact and the overall performance of the gear transmission system has been established. First, the surface topography is characterized using statistical parameters of rough surfaces, and the contact stiffness and damping for tooth surfaces with different roughnesses are calculated. Subsequently, a six degree of freedom gear tribo-dynamics coupling model is developed. Finally, the established tribo-dynamics model is employed to investigate the relationship between surface roughness and the overall performance of the gear transmission system. This study provides a more intimate connection between the contact interface and the general behavior of the gear transmission system, enabling a better representation of real-world engineering problems. The research findings reveal that contact stiffness and damping decrease with increasing surface roughness. Higher roughness leads to greater gear vibration amplitude. Moreover, elevated surface roughness results in intensified meshing force and more significant energy loss. Surprisingly, when the roughness is appropriate, gears with rough surfaces lose less energy than those with smooth surfaces.