CPCatur Arif Prastyanto

Catur Arif Prastyanto

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Catur Arif Prastyanto has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Review of Plant-Based Biopolymers for Application in Road Pavement

    by Dewi Sriastuti Nababan, Ervina Ahyudanari, Catur Arif Prastyanto, Eva Oktavia Ningrum

  • Open Access

    Effect of Void in Mineral Aggregate (VMA) Value on Hot Asphalt Mixes for Heavy Traffic

    by Sutoyo Karsono, Catur Arif Prastyanto, Anggoro Dias Ainur Rasyid, Vicario Baroroh

    VMA is an indicator of mixture performance, especially the flexibility and durability of the mixture, for this reason the asphalt content must be high. In contrast to the demands of heavy traffic, pavement must be strong and stable. To meet these needs, the mixture requires a low asphalt content, so this research will modify the asphalt mixture to meet all these needs by using the appropriate VMA value as the criterion. The VMA value consists of the effective asphalt content and the volume of voids in the mix (VIM). For this reason, it is necessary to pay attention to the asphalt content value that corresponds to the correct asphalt mixture gradation so as to produce a VMA value that is suitable for heavy traffic loads. This research will evaluate asphalt mixtures with a maximum aggregate size of 1.5 inches, specifically the combined aggregate gradation and effective asphalt content. High performance asphalt mixture properties, characterized by high Marshall stability and high flow, will be decided as the design mixture as long as the VMA value is met. The correct VMA value will describe the mixture as being within the limits of adequate flexibility and strength, thereby ensuring the durability of the mixture. Evaluation of laboratory tests with variations in the thickness of the asphalt aggregate cover for a maximum grain size of 1.5 inches resulted in quite significant differences in properties, especially Marshall stability and flow values. The results of the evaluation of the overall properties of the asphalt mixture for heavy traffic obtained a Marshall stability value = 3712 kg, VMA = 14.24%, VIM = 5.0% and VFA = 65.96% with an asphalt content of 5.2%.

  • Application of image sensors to obtain potholes data on road damage

    by Cahya Buana, Hera Widyastuti, Catur Arif Prastyanto, S. Rahardhita Widyatra

    Assessment of road condition can be done by visually assessing the level of road damage and also measuring road deflection. Currently measuring road damage asse


  • Open Access

    SELECTION ANALYSIS OF ROAD MAINTENANCE METHODS BETWEEN THE USE OF SLURRY SEALS AND SPOT LEVELLING FROM SERVICE LIFE AND CONSTRUCTION COSTS ASPECTS

    by Tri Cahyo Utomo, Catur Arif Prastyanto

    On national roads (arterial roads) whose LHR conditions should be the same or tend to be higher than provincial roads (collector roads) still often use slurry seals for handling to protect the asphalt layer from disintegration, cracking and reduced skid factor on the road. In fact, in its implementation on provincial roads, the lifespan of spot leveling works tends to have a much longer service life than slurry seals which tend to be damaged during the same fiscal year. This is certainly a contradictory conclusion between the two methods applied, namely on provincial roads with LHR tend to be lower than national roads using spot leveling treatment which has a longer lifespan, while on national roads it is the other way around. With the above problems, it is necessary to do further research on the factors that underlie the selection of the method, the service life of the results of the handling is compared to the construction costs incurred. The research method was carried out using LHR data to determine the condition of traffic loads on each segment of the segment, survey road conditions to determine the percentage of damage and the remaining service life of slurry seals and spot leveling, and compared with construction costs. The CESA value or traffic load characteristics affect the service life of the slurry seal, with a service life gap of 2.08 years and handling cost of Rp. 12,949.29 per square meter per year. Drainage conditions also influence the service life of the slurry seal, with a service life gap of 1.32 years and handling cost of Rp. 8,097 per square meter per year. Sidewalk conditions impact the service life of the slurry seal as well, with a service life gap of 0.52 years and handling cost of Rp. 4,688.39 per square meter per year. Based on the data on the service life gaps and handling costs, the most influential factor on the service life and duration of the slurry seal is the CESA condition on the road segment where the slurry seal is applied.