Jingjun Lou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jingjun Lou has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Kai Chai
College of naval architecture and ocean engineering, Naval University of Engineering, Wuhan 430033, China
6 shared publications - Qingchao Yang
Naval University of Engineering, Wuhan 430033, China
5 shared publications - Chu Jiawen
College of Naval Architecture and Ocean Engineering, Naval University of Engineering, Wuhan, China
4 shared publications - Mao-Ting Tan
Naval University of Engineering, Wuhan 430033, China
4 shared publications - Ming Yang
Naval University of Engineering, Wuhan 430033, China
4 shared publications - Juan Wang
Naval University of Engineering, Wuhan 430033, China
3 shared publications
Latest Publications
- 29 September 2026
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 114  (19) , 1198
Nonlinear-dynamic suppression of IRCs in a two-DOF main structure via equivalent NES cell design and parameter optimization
- 29 September 2026
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 114  (19) , 1198
Nonlinear-dynamic suppression of IRCs in a two-DOF main structure via equivalent NES cell design and parameter optimization
- Open Access
- 23 July 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14  (15) , 1350
Edge Loading and Wear Risk Analysis of a Marine Water-Lubricated Stern Bearing Considering Shaft-Deflection-Induced Journal Tilting
Classical hydrodynamic lubrication studies of journal bearings routinely invoke two simplifying assumptions: the axially rigid–straight journal assumption and the structure–lubrication decoupling assumption. For marine water-lubricated stern bearings, propeller overhung loading induces non-negligible shaft deflection across the bearing length, and the multi-support shafting makes the stern-bearing reaction force impossible to determine from rigid-body statics alone. Both assumptions must be removed within a single analysis framework. This study develops a coupled lubrication–rotor framework that combines a two-dimensional steady Reynolds solver with groove masking, a Winkler elastic liner, and a ROSS-based Timoshenko rotor finite element model through bidirectional reaction-force–tilt feedback. A normalised axial load distribution indicator , defined from the axial film-pressure profile, is introduced as a scalar boundary quantity linking the elastohydrodynamic lubrication solution to downstream wear evolution models. Condition decomposition and open-loop tilt sweeps show that the coupled-convergence tilt reduces by 65.7%, raises by 84.5%, and shifts the axial reaction-force distribution and peak toward the stern end. Axial non-uniformity intensifies monotonically with the increase in tilt angle, and beyond a threshold tilt, the HD/EHL solver no longer converges for a hard phenolic liner, establishing the applicability upper bound of the framework.- 23 July 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14  (15) , 1350
Open AccessEdge Loading and Wear Risk Analysis of a Marine Water-Lubricated Stern Bearing Considering Shaft-Deflection-Induced Journal Tilting
Classical hydrodynamic lubrication studies of journal bearings routinely invoke two simplifying assumptions: the axially rigid–straight journal assumption and the structure–lubrication decoupling assumption. For marine water-lubricated stern bearings, propeller overhung loading induces non-negligible shaft deflection across the bearing length, and the multi-support shafting makes the stern-bearing reaction force impossible to determine from rigid-body statics alone. Both assumptions must be removed within a single analysis framework. This study develops a coupled lubrication–rotor framework that combines a two-dimensional steady Reynolds solver with groove masking, a Winkler elastic liner, and a ROSS-based Timoshenko rotor finite element model through bidirectional reaction-force–tilt feedback. A normalised axial load distribution indicator , defined from the axial film-pressure profile, is introduced as a scalar boundary quantity linking the elastohydrodynamic lubrication solution to downstream wear evolution models. Condition decomposition and open-loop tilt sweeps show that the coupled-convergence tilt reduces by 65.7%, raises by 84.5%, and shifts the axial reaction-force distribution and peak toward the stern end. Axial non-uniformity intensifies monotonically with the increase in tilt angle, and beyond a threshold tilt, the HD/EHL solver no longer converges for a hard phenolic liner, establishing the applicability upper bound of the framework. - 19 June 2026
- Published by Elsevier in Measurement
- Vol. 285
Reconstruction of plate excitation forces via measurement of radiated acoustic fields
- 19 June 2026
- Published by Elsevier in Measurement
- Vol. 285
Reconstruction of plate excitation forces via measurement of radiated acoustic fields
- Open Access
- 13 May 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14  (10) , 905
Numerical Study of KVLCC2 Self-Propulsion with Conventional and Ducted Propellers in Shallow Water
This study investigates the hydrodynamic performance of the KVLCC2 tanker in deep and shallow water using computational fluid dynamics (CFD) simulations, focusing on resistance and self-propulsion with both ducted and non-ducted propellers. The Reynolds-averaged Navier–Stokes (RANS) equations, coupled with the SST k-ω turbulence model, are solved using STAR-CCM+ to analyze ship resistance, open-water propeller characteristics, and self-propulsion factors. Validation against experimental data confirms the numerical accuracy, with uncertainties below acceptable thresholds. In deep water, the body force propeller and body force ducted propeller methods are validated against the discretized propeller approach, yielding errors under 5%. The ducted propeller enhances open-water efficiency but results in higher thrust deduction and lower wake fractions, leading to reduced hull and overall propulsive efficiencies compared to the non-ducted case. In shallow water, as the depth-to-draft ratio (H/T) decreases to 1.5, added resistance, sinkage, and trim increase sharply due to blockage effects. The ducted configuration mitigates these penalties, achieving a 20.8% power reduction at H/T = 1.5. Added self-propulsion factors reveal that the duct improves hull efficiency and offsets shallow-water losses, enhancing propulsive efficiency. Flow field analysis shows accelerated stern wakes and asymmetric structures in shallow water, with the body force methods providing consistent predictions despite minor discrepancies in extreme conditions. This research highlights the efficacy of ducted propellers in shallow water and the reliability of body force methods for efficient simulations, offering insights for ship design in restricted depths.
- 13 May 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14  (10) , 905
Open AccessNumerical Study of KVLCC2 Self-Propulsion with Conventional and Ducted Propellers in Shallow Water
This study investigates the hydrodynamic performance of the KVLCC2 tanker in deep and shallow water using computational fluid dynamics (CFD) simulations, focusing on resistance and self-propulsion with both ducted and non-ducted propellers. The Reynolds-averaged Navier–Stokes (RANS) equations, coupled with the SST k-ω turbulence model, are solved using STAR-CCM+ to analyze ship resistance, open-water propeller characteristics, and self-propulsion factors. Validation against experimental data confirms the numerical accuracy, with uncertainties below acceptable thresholds. In deep water, the body force propeller and body force ducted propeller methods are validated against the discretized propeller approach, yielding errors under 5%. The ducted propeller enhances open-water efficiency but results in higher thrust deduction and lower wake fractions, leading to reduced hull and overall propulsive efficiencies compared to the non-ducted case. In shallow water, as the depth-to-draft ratio (H/T) decreases to 1.5, added resistance, sinkage, and trim increase sharply due to blockage effects. The ducted configuration mitigates these penalties, achieving a 20.8% power reduction at H/T = 1.5. Added self-propulsion factors reveal that the duct improves hull efficiency and offsets shallow-water losses, enhancing propulsive efficiency. Flow field analysis shows accelerated stern wakes and asymmetric structures in shallow water, with the body force methods providing consistent predictions despite minor discrepancies in extreme conditions. This research highlights the efficacy of ducted propellers in shallow water and the reliability of body force methods for efficient simulations, offering insights for ship design in restricted depths.
- Open Access
Amplitude–Frequency Response Characteristics and Parameter Optimization of a Bistable Nonlinear Energy Sink Under Wide-Frequency Harmonic Excitation
To address the detuning sensitivity of conventional linear vibration absorbers under wide-frequency harmonic excitation and the limited effectiveness of nonlinear energy sinks (NESs) in low-energy regimes, this study investigates a bistable nonlinear energy sink (BNES) based on a negative-stiffness support. A coupled model of the primary system and the BNES is established, and the analytical steady-state amplitude–frequency relationship of the system is derived using the harmonic balance method. The accuracy of the analytical solutions is verified through numerical integration. Based on the first Lyapunov method, the instability regions of the system are identified, and the effects of system parameters on the amplitude–frequency response of the primary structure are analyzed. On this basis, a comprehensive performance index that accounts for both peak suppression and average vibration reduction over the frequency band is constructed, and an improved particle swarm optimization algorithm is employed for parameter optimization. The results demonstrate that the optimized BNES can effectively suppress isolated high-amplitude response branches and significantly reduce the response of the primary system within the resonance frequency band, exhibiting superior broadband vibration mitigation performance and enhanced stability.
Open AccessAmplitude–Frequency Response Characteristics and Parameter Optimization of a Bistable Nonlinear Energy Sink Under Wide-Frequency Harmonic Excitation
To address the detuning sensitivity of conventional linear vibration absorbers under wide-frequency harmonic excitation and the limited effectiveness of nonlinear energy sinks (NESs) in low-energy regimes, this study investigates a bistable nonlinear energy sink (BNES) based on a negative-stiffness support. A coupled model of the primary system and the BNES is established, and the analytical steady-state amplitude–frequency relationship of the system is derived using the harmonic balance method. The accuracy of the analytical solutions is verified through numerical integration. Based on the first Lyapunov method, the instability regions of the system are identified, and the effects of system parameters on the amplitude–frequency response of the primary structure are analyzed. On this basis, a comprehensive performance index that accounts for both peak suppression and average vibration reduction over the frequency band is constructed, and an improved particle swarm optimization algorithm is employed for parameter optimization. The results demonstrate that the optimized BNES can effectively suppress isolated high-amplitude response branches and significantly reduce the response of the primary system within the resonance frequency band, exhibiting superior broadband vibration mitigation performance and enhanced stability.
- 27 February 2026
- Published by Elsevier in Applied Acoustics
- Vol. 248
Reconstruction method of radial excitation forces for cylindrical shells based on acoustic signal measurements
- 27 February 2026
- Published by Elsevier in Applied Acoustics
- Vol. 248
Reconstruction method of radial excitation forces for cylindrical shells based on acoustic signal measurements
- Open Access
- 25 February 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16  (5) , 2201
Vibration Control of a Base Structure Using a GVTC Damping Plate Based on the Acoustic Black Hole Effect
This study addresses the challenge of multi-order resonance in base structures within the low-frequency range (10~300 Hz), a common issue in shipbuilding and aerospace applications. Traditional vibration control methods, including those based on the Acoustic Black Hole (ABH) effect, often undermine base structural integrity, offer limited effective bandwidth, or pose practical implementation challenges. To overcome these limitations, this paper proposes a Gradient Variable-Thickness Composite (GVTC) damping plate for passive vibration control, integrating the ABH effect with anti-resonance theory. The key innovation is an engineering-oriented integrated design characterized by external mounting, multi-level stacking, and efficient shell-element modeling rather than a fundamental modification to the ABH principle itself. The composite plate comprises a uniform-thickness region, a gradient-thickness region, and a damping layer, with thickness variation defined by a power-law function. By tuning geometric and material parameters, the plate’s natural frequencies are matched to the base panel’s resonant peaks. Employing shell elements over solid elements significantly reduces computational cost while maintaining high accuracy (relative error of the first three natural frequencies < 0.6%). Finite element simulations and experimental tests have demonstrated significant vibration suppression: peak reductions of 10 dB, 12.1 dB, 9.7 dB, and 22.9 dB at 94 Hz, 188 Hz, 244 Hz, and 294 Hz, respectively, under simulation conditions, and 7.5 dB, 11.1 dB, 8.5 dB, and 7 dB at 82 Hz, 172 Hz, 234 Hz, and 286 Hz, respectively, in experiments. The additional mass of the damping plate accounts for only 1.53% of the base panel mass. This work provides a practical and efficient solution for low-frequency vibration control and facilitates the engineering application of ABH technology in high-end equipment.
- 25 February 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16  (5) , 2201
Open AccessVibration Control of a Base Structure Using a GVTC Damping Plate Based on the Acoustic Black Hole Effect
This study addresses the challenge of multi-order resonance in base structures within the low-frequency range (10~300 Hz), a common issue in shipbuilding and aerospace applications. Traditional vibration control methods, including those based on the Acoustic Black Hole (ABH) effect, often undermine base structural integrity, offer limited effective bandwidth, or pose practical implementation challenges. To overcome these limitations, this paper proposes a Gradient Variable-Thickness Composite (GVTC) damping plate for passive vibration control, integrating the ABH effect with anti-resonance theory. The key innovation is an engineering-oriented integrated design characterized by external mounting, multi-level stacking, and efficient shell-element modeling rather than a fundamental modification to the ABH principle itself. The composite plate comprises a uniform-thickness region, a gradient-thickness region, and a damping layer, with thickness variation defined by a power-law function. By tuning geometric and material parameters, the plate’s natural frequencies are matched to the base panel’s resonant peaks. Employing shell elements over solid elements significantly reduces computational cost while maintaining high accuracy (relative error of the first three natural frequencies < 0.6%). Finite element simulations and experimental tests have demonstrated significant vibration suppression: peak reductions of 10 dB, 12.1 dB, 9.7 dB, and 22.9 dB at 94 Hz, 188 Hz, 244 Hz, and 294 Hz, respectively, under simulation conditions, and 7.5 dB, 11.1 dB, 8.5 dB, and 7 dB at 82 Hz, 172 Hz, 234 Hz, and 286 Hz, respectively, in experiments. The additional mass of the damping plate accounts for only 1.53% of the base panel mass. This work provides a practical and efficient solution for low-frequency vibration control and facilitates the engineering application of ABH technology in high-end equipment.
- Open Access
- 9 February 2026
- Published by Elsevier in SSRN Electronic Journal
Temperature-Based Quantitative Detection of Micro-Internal Leakage in Heat-Cycle Isolation Valves of Nuclear Power Plants
The internal leakage of heat-cycle isolation valves in nuclear power plants impairs plant economics and may trigger environmental contamination or safety issues due to medium release. Non-destructive, on-line and quantitative detection methods are therefore urgently required. Among existing techniques, the temperature method is the most promising for quantitative on-line leakage detection of high-temperature valves; however, the coupled multi-physics nature of micro-leakage and their invisibility make both identification and quantification challenging.Taking actual plant pressure and temperature as boundary conditions, artificial valve defects were designed and a fluid-thermal-solid coupled CFD model was built. Temperature-characteristic parameters extracted from the simulated outer-wall temperature field were correlated with leakage rate by combining the least-squares method with multiple linear regression. Experimental validation showed predicted leakage rates agree with measured values within a mean relative error of 6% and the minimum detectable leakage is 2 L/h, outperforming traditional models. The temperature-based predictor therefore offers practical value for enhanced online monitoring and predictive maintenance in nuclear power plants.
- 9 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessTemperature-Based Quantitative Detection of Micro-Internal Leakage in Heat-Cycle Isolation Valves of Nuclear Power Plants
The internal leakage of heat-cycle isolation valves in nuclear power plants impairs plant economics and may trigger environmental contamination or safety issues due to medium release. Non-destructive, on-line and quantitative detection methods are therefore urgently required. Among existing techniques, the temperature method is the most promising for quantitative on-line leakage detection of high-temperature valves; however, the coupled multi-physics nature of micro-leakage and their invisibility make both identification and quantification challenging.Taking actual plant pressure and temperature as boundary conditions, artificial valve defects were designed and a fluid-thermal-solid coupled CFD model was built. Temperature-characteristic parameters extracted from the simulated outer-wall temperature field were correlated with leakage rate by combining the least-squares method with multiple linear regression. Experimental validation showed predicted leakage rates agree with measured values within a mean relative error of 6% and the minimum detectable leakage is 2 L/h, outperforming traditional models. The temperature-based predictor therefore offers practical value for enhanced online monitoring and predictive maintenance in nuclear power plants.
- Open Access
Vibration Suppression and Bifurcation Analysis of a Two-DOF Structure Coupled with PMNES
Vibration is a critical issue in aerospace structures, where lightweight design, high flexibility, and complex operational environments often lead to pronounced nonlinear dynamic responses. Excessive vibrations induced by harmonic excitations, aerodynamic loads, or onboard equipment can significantly degrade structural integrity, control accuracy, and service life. Consequently, advanced passive vibration suppression techniques with strong robustness and broadband effectiveness are of great importance in aerospace engineering applications. The bifurcation boundary and vibration suppression performance of Piezoelectric–Monostable Nonlinear Energy Sink (PMNES) are crucial for evaluating its effectiveness on the main structure. To simplify the analysis of flexible aerospace structures, a reduced-order model is derived by modal truncation in the low-frequency range, which is then treated as a two-degree-of-freedom main structure. To focus on the underlying nonlinear dynamic mechanisms, an equivalent two-degree-of-freedom lumped-parameter system is adopted as a generic representation of the dominant low-frequency dynamics of flexible aerospace structures. In this work, the electromechanical coupling control equations of the system of a two-degree-of-freedom main structure coupled with PNES are derived through the application of Newton’s second law and Kirchhoff’s voltage law. The methods of complexification-averaging (CX-A) and Runge–Kutta (RK) are employed to assess the vibration suppression performance and stability characteristics of the system under harmonic excitation. The approximate solution is validated through numerical solutions. The approximate solutions of the system are employed to derive the Saddle Node (SN) bifurcation and codimension-two cusp bifurcation points, while the enhanced algorithm is employed to ascertain the most unfavorable amplitude at each external excitation circular frequency and to determine whether the mark represents a Hopf Bifurcation (HB) point. The generalized transmissibility is utilized to assess the efficacy of vibration suppression. The various vibration suppression efficiency regions are created by superimposing the vibration suppression efficiency maps and bifurcation maps. The influence of PNES parameters on the vibration suppression region is investigated. The results indicate that this method can effectively evaluate the bifurcation boundary and vibration suppression performance of PMNES.
Open AccessVibration Suppression and Bifurcation Analysis of a Two-DOF Structure Coupled with PMNES
Vibration is a critical issue in aerospace structures, where lightweight design, high flexibility, and complex operational environments often lead to pronounced nonlinear dynamic responses. Excessive vibrations induced by harmonic excitations, aerodynamic loads, or onboard equipment can significantly degrade structural integrity, control accuracy, and service life. Consequently, advanced passive vibration suppression techniques with strong robustness and broadband effectiveness are of great importance in aerospace engineering applications. The bifurcation boundary and vibration suppression performance of Piezoelectric–Monostable Nonlinear Energy Sink (PMNES) are crucial for evaluating its effectiveness on the main structure. To simplify the analysis of flexible aerospace structures, a reduced-order model is derived by modal truncation in the low-frequency range, which is then treated as a two-degree-of-freedom main structure. To focus on the underlying nonlinear dynamic mechanisms, an equivalent two-degree-of-freedom lumped-parameter system is adopted as a generic representation of the dominant low-frequency dynamics of flexible aerospace structures. In this work, the electromechanical coupling control equations of the system of a two-degree-of-freedom main structure coupled with PNES are derived through the application of Newton’s second law and Kirchhoff’s voltage law. The methods of complexification-averaging (CX-A) and Runge–Kutta (RK) are employed to assess the vibration suppression performance and stability characteristics of the system under harmonic excitation. The approximate solution is validated through numerical solutions. The approximate solutions of the system are employed to derive the Saddle Node (SN) bifurcation and codimension-two cusp bifurcation points, while the enhanced algorithm is employed to ascertain the most unfavorable amplitude at each external excitation circular frequency and to determine whether the mark represents a Hopf Bifurcation (HB) point. The generalized transmissibility is utilized to assess the efficacy of vibration suppression. The various vibration suppression efficiency regions are created by superimposing the vibration suppression efficiency maps and bifurcation maps. The influence of PNES parameters on the vibration suppression region is investigated. The results indicate that this method can effectively evaluate the bifurcation boundary and vibration suppression performance of PMNES.
- Open Access
Optimal Design of Electromagnetic Absorber Based on Magnetic Field Directional Consistency
This study proposes a permanent magnet edge topology optimization method to address the low force output efficiency in Electromagnetic Vibration Absorbers caused by magnetic field distortion at the geometric discontinuity between the permanent magnet and the magnetic yoke. A theoretical model incorporating magnetic flux enhancement and improved directional consistency is established, revealing a transition in dominant mechanisms: magnetic flux enhancement dominates at small chamfer depths, while improved directional consistency becomes predominant at larger chamfer depths. Experimental validation was conducted on the optimized structure with a standard chamfer angle and 4 mm chamfer depth under operational conditions. Test results show an average force output increase of 4.6%, reaching 6.8% at 5 A. This research provides a theoretical basis and design methodology for geometric optimization of electromagnetic actuators in space-constrained environments.
Open AccessOptimal Design of Electromagnetic Absorber Based on Magnetic Field Directional Consistency
This study proposes a permanent magnet edge topology optimization method to address the low force output efficiency in Electromagnetic Vibration Absorbers caused by magnetic field distortion at the geometric discontinuity between the permanent magnet and the magnetic yoke. A theoretical model incorporating magnetic flux enhancement and improved directional consistency is established, revealing a transition in dominant mechanisms: magnetic flux enhancement dominates at small chamfer depths, while improved directional consistency becomes predominant at larger chamfer depths. Experimental validation was conducted on the optimized structure with a standard chamfer angle and 4 mm chamfer depth under operational conditions. Test results show an average force output increase of 4.6%, reaching 6.8% at 5 A. This research provides a theoretical basis and design methodology for geometric optimization of electromagnetic actuators in space-constrained environments.