RWRuiyang Wang

Ruiyang Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ruiyang Wang has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Investigation of the Properties and Microstructure of EVA-Modified Underwater Repair Mortar

    by Suining Zheng, Jiming Xiao, Huaxin Chen, Anhua Xu, Ruiyang Wang, Fulu Li

    Ethylene–vinyl acetate (EVA) as a redispersible polymer can improve the workability, mechanical properties, and interfacial bonding of repair mortar, but the regulatory effect of different EVA dosages on underwater performance remains unclear. This study investigates EVA–polyacrylamide (PAM) composite-modified repair mortar and systematically evaluates the influence of varying EVA content on mortar performance. Multi-scale methods including setting time measurement, flowability test, flexural and compressive strength tests, underwater flexural bonding strength, water-to-air strength ratio, cement loss rate, porosity, and scanning electron microscopy (SEM) characterization were employed. The results indicate that mortar with 8% EVA exhibits the optimal overall performance. The initial setting time of the cement paste increased from 35 to 47 min, and the final setting time from 55 to 72 min, improving workability. In terms of mechanical properties, the 28-day flexural strength increased from 7.5 to 9.2 MPa, and the compressive strength from 44.4 to 50.6 MPa. Regarding underwater performance, the 28-day underwater flexural bonding strength rose from 5.1 to 6.5 MPa; the water-to-air strength ratio increased from 79.1% to 95.2%, and cement loss rate decreased from 3.18% to 0.32%; pH changes were maintained within a moderate range. Microstructural analysis shows that the total porosity at 28 d decreased from 16.8% to 13.5% for mortar containing 8% EVA, and SEM observations revealed that hydration products uniformly filled pores forming a dense network, consistent with the trends of mechanical and interfacial bonding performance enhancement.


  • Open Access

    Influence of Ion Chelating Agents with Different Chelating Abilities on the Properties and Microstructure of Cement-Based Materials

    by Ke Zhao, Ruiyang Wang, Jianying Yu, Quantao Liu, Yagang Zha

    Concrete structures are prone to cracking and seepage issues due to material degradation during long-term service. Ionic chelating agents (ICAs) can significantly enhance the durability and extend the service life of concrete structures by chelating metal ions in the cement matrix and promoting the formation of crystalline products within pores. The study selected commonly used ICAs, including sodium gluconate, sodium maleate, and sodium citrate, as well as a self-made high-efficiency ICA, to compare their chelating abilities for metal ions (such as Al3+, Mg2+, Fe3+, and Ca2+). Their effects on the performance and microstructure of cement-based materials were evaluated through tests on hydration heat, mechanical strength, the chloride ion diffusion coefficient, pore size distribution, and microstructural analysis. The results showed that the stronger the chelating ability of the ICA, the more significant its improvement on the performance and microstructure of cement-based materials. Cement paste incorporating the high-efficiency ICA exhibited significantly accelerated hydration kinetics, with the hydration rate markedly increasing and the peak heat release rising from 0.0012 W/g to 0.0016 W/g, thereby effectively enhancing the early-age properties of the cement-based materials. After 28 days, compared to ordinary mortar, the flexural and compressive strengths of mortar containing the high-efficiency ICA increased by 17.1% and 11.6%, respectively, while the chloride ion diffusion coefficient decreased by 37.4%. Pore size distribution and microstructural analyses indicated that mortar incorporating the high-efficiency ICA exhibited the most compact internal structure, with abundant crystalline products such as CaSiO3 and 3CaO·Al2O3·3CaSO4·32H2O (AFt) forming within the pores. These findings suggest that optimizing the ion-chelating capacity of ICA provides a feasible strategy to enhance the compactness, durability, and mechanical performance of cement-based materials in practical engineering applications.


  • Open Access

    Performance Evaluations of Warm-Mix Reaction-Rejuvenated SBS Modified Asphalt Mixtures Incorporated with Wax-Based Additive

    by Zihui Liu, Qi Chen, Junwen Pei, Ruiyang Wang, Weili Shen, Chao Huang, Jialiang Liu, Xiong Xu

    The high-performance, cleaner rejuvenation of aged SBS-modified asphalt mixtures (ASBSMAMs) has been a hotspot in asphalt research. Currently, the most popular rejuvenation method still involves hot-mix asphalt with a commonly used oil as the rejuvenator for recycling. However, high-quality, cleaner warm-mix rejuvenation technology for ASBSMAMs is still needed to enrich this field. This study considered adopting a polyurethane (PU) prepolymer and 1,4-butanediol diglycidyl ether (BUDGE) as reactive rejuvenators to achieve warm-mix reaction–rejuvenation to enhance the properties of ASBSMAMs with the use of a wax-based additive, Sasobit. A series of tests were conducted to realize this, including the viscosity–temperature correlation of the rejuvenated binders, as well as tests of the moisture-induced damage, high-temperature stability, low-temperature cracking resistance, and fatigue resistance of the rejuvenated mixtures. The results showed the following: through reaction–rejuvenation, Sasobit could reduce the viscosity of the rejuvenated SBSMA (RSBSMA) below 150 °C for warm mixing and slightly decrease the viscosity–temperature susceptibility; warm-mix reaction–rejuvenation helped to improve the resistance to water-immersion-induced damage and freeze–thaw damage in ASBSMAMs; the addition of Sasobit showed benefits in improving their resistance to permanent deformation, with the dynamic stability values exceeding 5700 pass/mm as more than 1% Sasobit was added; the flexural damage resistance of ASBSMAMs at low temperatures could be enhanced after warm-mix reaction–rejuvenation; and, under reaction–rejuvenation conditions, Sasobit did not reduce the fatigue resistance of the RSBSMAM and, conversely, at limited higher dosages, it worked more effectively. Overall, the studied warm-mix reaction–rejuvenation technology has been proven to be effective for the environmental recycling and reuse of ASBSMAMs at high quality.


  • Open Access

    Performance Evaluation of Asphalt Concrete Incorporating Steel Slag Powder as Filler under the Combined Damage of Temperature and Moisture

    by Shiquan Liu, Zhipeng Zhang, Ruiyang Wang

    Recycling steel slag into asphalt concrete is an important way to save natural resources and protect the environment. The high asphalt absorption and adsorption and the sensitivity of steel slag aggregate (SSA) to the combined damage of temperature and moisture (volume expansion and poor durability under freeze-thaw cycle damage) still pose risks for the use of SSA in asphalt concrete. It is urgent to develop new utilization methods of steel slag. With this in mind, the material properties of steel slag powder (SSP) and performance characteristics of asphalt concrete incorporating SSP filler were evaluated in this research. The SSP was prepared in the laboratory by grinding steel slag with a particle size of 2.36–4.75 mm. Firstly, the material properties of SSP including the specific surface area, particle gradation, apparent density, chemical compositions, and thermal stability were analyzed. Steel slag (2.36–4.75 mm) and common limestone powder (LP) filler were used as control groups. The grindability of steel slag and the advantages of using SSP as a filler in asphalt concrete were preliminarily analyzed based on the test results of material properties. Then, the Superpave method was used to design asphalt concrete incorporating SSP and LP. Considering that steel slag is sensitive to the combined damage of temperature and moisture, the main engineering performance of asphalt concrete after the combined damage of temperature and moisture was evaluated to further reveal the feasibility of using SSP as a filler. Two combined damage modes, namely hot water damage and freeze-thaw cycle damage, were applied. Results suggest that although the steel slag is more difficult to grind compared to limestone particles, grinding steel slag into SSP has improved the uniformity of its material properties. Good uniformity of material properties, high alkalinity, and excellent thermal stability of SSP give it some advantages in its application in asphalt concrete. Although the freeze-thaw cycle damage has a slightly more significant effect on the engineering performance of asphalt concrete than hot water damage, compared to the asphalt concrete with LP filler, even after freeze-thaw cycle damage for three cycles asphalt concrete incorporating SSP still possesses comparable or better volume stability, mechanical performance, high-temperature deformation resistance, low-temperature crack resistance, fatigue crack resistance, and fatigue durability.