Abdul Jalal
Research Subjects
Abdul Jalal has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
Muhammad Qasim
National Key Laboratory on Near-Surface Detection, Beijing 100072, China
6 shared publications- Bin Hu
School of Optics and Photonics Beijing Institute of Technology Beijing China
5 shared publications Bowen Deng
National Key Laboratory on Near-Surface Detection, Beijing 100072, China
3 shared publications- Ubaid Ur Rahman Qureshi
Zhejiang University
3 shared publications Chenjie Xiong
National Key Laboratory on Near-Surface Detection, Beijing 100072, China
2 shared publicationsMuhammad Ismail Khan
City University of Hong Kong, 83 Tat Chee Ave, Kowloon Tong, Hong Kong, Hong Kong, Hong Kong, 518057, HONG KONG
2 shared publications
Latest Publications
- Open Access
- 1 January 2025
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 23 (4) , 043603
Bending-switchable terahertz metamaterial with a single layer based on laser-induced graphene
We propose a fast-printable and function-switchable metamaterial based on laser-induced graphene for terahertz (THz) wave modulation in the reflection mode. The design can modulate the linear polarization of the incoming wave fronts to its cross-polarization from 0.27 to 0.41 THz and linear polarization to circular polarization from 0.48 to 0.62 THz. The function of the device can also be switched from a polarization converter to an absorber by bending it with an angle of 57°. Experimental results showed a good agreement with those of the simulation. The proposed polarization converter may find its application in THz polarization control systems and sensing.
- 1 January 2025
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 23 (4) , 043603
Open AccessBending-switchable terahertz metamaterial with a single layer based on laser-induced graphene
We propose a fast-printable and function-switchable metamaterial based on laser-induced graphene for terahertz (THz) wave modulation in the reflection mode. The design can modulate the linear polarization of the incoming wave fronts to its cross-polarization from 0.27 to 0.41 THz and linear polarization to circular polarization from 0.48 to 0.62 THz. The function of the device can also be switched from a polarization converter to an absorber by bending it with an angle of 57°. Experimental results showed a good agreement with those of the simulation. The proposed polarization converter may find its application in THz polarization control systems and sensing.
- 28 August 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (19) , 32836-32848
Chiral terahertz metasurface with asymmetric transmission, polarization conversion and circular dichroism
A tri-layer chiral metasurface with multi-functions of asymmetric transmission (AT), polarization conversion (PC) and circular dichroism (CD) is proposed in the terahertz (THz) range. Simulation results show that the metasurface is able to realize AT with more than 90% efficiency and PC fractional bandwidth of 80% over a frequency range of 0.15 to 0.35 THz. At 0.33 THz, it showcases the utmost CD of 58%. Through experimental measurements, the fabricated device demonstrate that the AT parameters exceed 35% in the frequency range of 0.24-0.33 THz. This broad frequency range represents a PC fractional bandwidth of 69% and reveals a prominent peak at 0.28 THz, wherein the transmission attains a value of 0.62. The proposed configuration exhibits CD, achieving 14% at 0.24 THz. Furthermore, the functionalities of AT, PC and CD are stable for changes in incident angle up to 60° for both linearly polarized and circularly polarized incident waves. Moreover, the experimental and measured results demonstrate that the proposed multilayer chiral metamaterial achieves multifunctionality for THz incident waves, offering promising implications for advancing THz communication bands.
- 28 August 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (19) , 32836-32848
Chiral terahertz metasurface with asymmetric transmission, polarization conversion and circular dichroism
A tri-layer chiral metasurface with multi-functions of asymmetric transmission (AT), polarization conversion (PC) and circular dichroism (CD) is proposed in the terahertz (THz) range. Simulation results show that the metasurface is able to realize AT with more than 90% efficiency and PC fractional bandwidth of 80% over a frequency range of 0.15 to 0.35 THz. At 0.33 THz, it showcases the utmost CD of 58%. Through experimental measurements, the fabricated device demonstrate that the AT parameters exceed 35% in the frequency range of 0.24-0.33 THz. This broad frequency range represents a PC fractional bandwidth of 69% and reveals a prominent peak at 0.28 THz, wherein the transmission attains a value of 0.62. The proposed configuration exhibits CD, achieving 14% at 0.24 THz. Furthermore, the functionalities of AT, PC and CD are stable for changes in incident angle up to 60° for both linearly polarized and circularly polarized incident waves. Moreover, the experimental and measured results demonstrate that the proposed multilayer chiral metamaterial achieves multifunctionality for THz incident waves, offering promising implications for advancing THz communication bands.
- 12 July 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (8) , 085520
Ultra-broadband and thin switchable multifunctional metamaterial for terahertz wave
An ultra-broadband thin multi-functional and switchable metamaterial is examined in the terahertz (THz) regime. The proposed design achieved high polarization conversion efficiency and can be switched from a polarization converter to an absorber using the phase change transitioning of vanadium dioxide (VO2). The linear polarization conversion is achieved from 6.0 THz to 15.0 THz, achieving a bandwidth of 9.0 THz, and the absorption is realized from 5.0 THz to 16.0 THz with a bandwidth of 11.0 THz. These broadband characteristics were achieved by a simple metamaterial design incorporating a few layers. The relative bandwidth was 85% for the polarization conversion and 105% for the absorption. Moreover, the angular stability of the designed structure is impressive for various incident angles from 0° to 45°. The proposed switchable design has the potential to contribute to the development of tunable polarization rotating devices, on/off switching LPC devices, which have wide application potentials in THz detection, sensing, adaptive optics, and communications.
- 12 July 2024
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (8) , 085520
Ultra-broadband and thin switchable multifunctional metamaterial for terahertz wave
An ultra-broadband thin multi-functional and switchable metamaterial is examined in the terahertz (THz) regime. The proposed design achieved high polarization conversion efficiency and can be switched from a polarization converter to an absorber using the phase change transitioning of vanadium dioxide (VO2). The linear polarization conversion is achieved from 6.0 THz to 15.0 THz, achieving a bandwidth of 9.0 THz, and the absorption is realized from 5.0 THz to 16.0 THz with a bandwidth of 11.0 THz. These broadband characteristics were achieved by a simple metamaterial design incorporating a few layers. The relative bandwidth was 85% for the polarization conversion and 105% for the absorption. Moreover, the angular stability of the designed structure is impressive for various incident angles from 0° to 45°. The proposed switchable design has the potential to contribute to the development of tunable polarization rotating devices, on/off switching LPC devices, which have wide application potentials in THz detection, sensing, adaptive optics, and communications.
- 27 June 2024
- Published by Optica Publishing Group in Optics Continuum
- Vol. 3 (7) , 1265-1272
Vanadium dioxide-assisted switching of a half-wave and quarter-wave plate to a dual-band absorber for the terahertz wave.
- 27 June 2024
- Published by Optica Publishing Group in Optics Continuum
- Vol. 3 (7) , 1265-1272
Vanadium dioxide-assisted switching of a half-wave and quarter-wave plate to a dual-band absorber for the terahertz wave.
- 9 May 2024
- Published by Wiley in Advanced Theory and Simulations
- Vol. 7 (7)
Ultrathin Bi‐Switchable Vanadium Dioxide‐Based Multifunctional Metamaterial for Terahertz Polarization Modulation
A broadband multi‐functional bi‐switchable ultrathin optical metamaterial design is investigated, which can achieve a high polarization conversion efficiency over a wide band of frequencies in the terahertz (THz) regime. The proposed design switches from a linear and circular polarization converter (LPC/CPC) to an efficient absorber by using the phase change property of a functional material, vanadium dioxide (VO2). The proposed design shows switching from an absorber to a reflector using the mechanical configuration of the functional material, and therefore the design can be used as a bi‐switchable device. The first type of switching is accomplished by changing the conductivity of the functional material, while the second type of switching is achieved with the help of the mechanical configuration of the functional material. Moreover, the structure is responsive to wide incident angles. The proposed switchable design has the potential to contribute to the development of tunable polarization rotating devices and on/off switching LPC devices, which have wide applications in detection, sensing, and communications.
- 9 May 2024
- Published by Wiley in Advanced Theory and Simulations
- Vol. 7 (7)
Ultrathin Bi‐Switchable Vanadium Dioxide‐Based Multifunctional Metamaterial for Terahertz Polarization Modulation
A broadband multi‐functional bi‐switchable ultrathin optical metamaterial design is investigated, which can achieve a high polarization conversion efficiency over a wide band of frequencies in the terahertz (THz) regime. The proposed design switches from a linear and circular polarization converter (LPC/CPC) to an efficient absorber by using the phase change property of a functional material, vanadium dioxide (VO2). The proposed design shows switching from an absorber to a reflector using the mechanical configuration of the functional material, and therefore the design can be used as a bi‐switchable device. The first type of switching is accomplished by changing the conductivity of the functional material, while the second type of switching is achieved with the help of the mechanical configuration of the functional material. Moreover, the structure is responsive to wide incident angles. The proposed switchable design has the potential to contribute to the development of tunable polarization rotating devices and on/off switching LPC devices, which have wide applications in detection, sensing, and communications.
- Open Access
- 19 December 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (1) , 015512
Design and experimental realization of multifunctional anisotropic metasurface for efficient polarization manipulation in microwave frequencies
This paper presents the realization of a multifunction anisotropic metasurface capable of operating as both a half-waveplate and a quarter-waveplate in the C, X, and Ku bands. The numerical and experimental results demonstrate the metasurface is able to convert linear and circular polarizations to their respective cross-polarizations, as well as achieve linear-to-circular and circular-to-linear polarization conversions in the microwave frequency regime. Notably, the metasurface maintains high conversion efficiencies for both half-wave and quarter-wave plate operations, even when subjected to variations in the incidence angle. The underlying physical mechanism is elucidated through the analysis of eigen values, surface current distribution and the retrieval of effective physical parameters. The proposed metasurface is useful for communication and polarization manipulation devices due to its simple construction, compact size, angular stability, and multi-functionality.
- 19 December 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 99 (1) , 015512
Open AccessDesign and experimental realization of multifunctional anisotropic metasurface for efficient polarization manipulation in microwave frequencies
This paper presents the realization of a multifunction anisotropic metasurface capable of operating as both a half-waveplate and a quarter-waveplate in the C, X, and Ku bands. The numerical and experimental results demonstrate the metasurface is able to convert linear and circular polarizations to their respective cross-polarizations, as well as achieve linear-to-circular and circular-to-linear polarization conversions in the microwave frequency regime. Notably, the metasurface maintains high conversion efficiencies for both half-wave and quarter-wave plate operations, even when subjected to variations in the incidence angle. The underlying physical mechanism is elucidated through the analysis of eigen values, surface current distribution and the retrieval of effective physical parameters. The proposed metasurface is useful for communication and polarization manipulation devices due to its simple construction, compact size, angular stability, and multi-functionality.
- 13 October 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (11) , 115514
Active anisotropic polarization conversion meta-surface for 6G communication bandgap in the reflection mode
This paper investigates a single-layered active anisotropic meta-surface design capable of achieving high polarization conversion efficiency in the 6 G communication band gap. Additionally, the designed structure can convert the linear polarization of the incoming wave fronts to its cross-polarization and linear polarization to circular polarization in the reflection mode. The polarization conversion characteristic is achieved due to the strong anisotropic behavior of the meta-surface. Such a simple design can achieve a 90% to 100% cross-polarization conversion efficiency over a frequency region of [0.28–0.36] THz. The linear to circular polarization conversion is performed near 0.26 THz and 0.40 THz. Between these two frequencies, band linear to cross-polarization conversion is more prominent. The proposed design can be tuned from a half-wave plate (HWP) or linear polarization converter to a quarter-wave plate (QWP) or circular polarization converter using the chemical potential of graphene. The optical response of the meta-surface behaves differently from different incident angles. The proposed polarization converter can contribute to the development of active polarization device.
- 13 October 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (11) , 115514
Active anisotropic polarization conversion meta-surface for 6G communication bandgap in the reflection mode
This paper investigates a single-layered active anisotropic meta-surface design capable of achieving high polarization conversion efficiency in the 6 G communication band gap. Additionally, the designed structure can convert the linear polarization of the incoming wave fronts to its cross-polarization and linear polarization to circular polarization in the reflection mode. The polarization conversion characteristic is achieved due to the strong anisotropic behavior of the meta-surface. Such a simple design can achieve a 90% to 100% cross-polarization conversion efficiency over a frequency region of [0.28–0.36] THz. The linear to circular polarization conversion is performed near 0.26 THz and 0.40 THz. Between these two frequencies, band linear to cross-polarization conversion is more prominent. The proposed design can be tuned from a half-wave plate (HWP) or linear polarization converter to a quarter-wave plate (QWP) or circular polarization converter using the chemical potential of graphene. The optical response of the meta-surface behaves differently from different incident angles. The proposed polarization converter can contribute to the development of active polarization device.
- 20 July 2023
- Published by Wiley in Energy Technology
- Vol. 11 (10)
High‐Performance Self‐Powered Broadband Schottky Junction Photodetector Based on Graphene‐Silicon van der Waals Heterostructure
The development of information sensing technology depends on overcoming the difficulties of high‐performance broadband photodetection by developing novel devices that incorporate new materials and structural innovations. The combination of silicon with two‐dimensional materials has made a breakthrough in the discoveries of high‐speed, highly sensitive, low‐power broadband photodetectors. Graphene (Gra) is an attractive 2D material because of its unique optical, electrical, mechanical, and thermal properties. Over a wide spectral range, the coupling of Gra and Si can exhibit appealing photosensing behavior. Herein, a high‐performance, self‐powered broadband Schottky junction photodetector formed by the van der Waals stacking of Gra over the n‐Si substrate is demonstrated. The device exhibits a remarkable broadband spectral response from the visible (405 nm) range to the infrared region (1,550 nm). The remarkable values of responsivity, detectivity, and external quantum efficiency of 300 mA W−1, 3.37×1011 Jones, and 90% are achieved, respectively, at 532 nm illumination with a fast rise time of 320 μs. The high‐speed, broadband photoresponse and economical manufacturing of this device make it a potential candidate for the optoelectronics market.
- 20 July 2023
- Published by Wiley in Energy Technology
- Vol. 11 (10)
High‐Performance Self‐Powered Broadband Schottky Junction Photodetector Based on Graphene‐Silicon van der Waals Heterostructure
The development of information sensing technology depends on overcoming the difficulties of high‐performance broadband photodetection by developing novel devices that incorporate new materials and structural innovations. The combination of silicon with two‐dimensional materials has made a breakthrough in the discoveries of high‐speed, highly sensitive, low‐power broadband photodetectors. Graphene (Gra) is an attractive 2D material because of its unique optical, electrical, mechanical, and thermal properties. Over a wide spectral range, the coupling of Gra and Si can exhibit appealing photosensing behavior. Herein, a high‐performance, self‐powered broadband Schottky junction photodetector formed by the van der Waals stacking of Gra over the n‐Si substrate is demonstrated. The device exhibits a remarkable broadband spectral response from the visible (405 nm) range to the infrared region (1,550 nm). The remarkable values of responsivity, detectivity, and external quantum efficiency of 300 mA W−1, 3.37×1011 Jones, and 90% are achieved, respectively, at 532 nm illumination with a fast rise time of 320 μs. The high‐speed, broadband photoresponse and economical manufacturing of this device make it a potential candidate for the optoelectronics market.
- 30 May 2023
- Published by Optica Publishing Group in Journal of the Optical Society of America A
- Vol. 40 (6) , 1183-1190
Multifunctional and switchable metamaterial for terahertz polarization modulation in the reflection mode
In this paper, a broadband multi-layered active metamaterial design is investigated, which can achieve a high polarization conversion efficiency over a wide band of frequencies in the terahertz regime. The design can be switched to an efficient metamaterial absorber using the phase transition property of vanadium dioxide (VO2). Additionally, the designed structure can convert the linear polarization of the incoming wavefronts to its cross-polarization and linear polarization to circular polarization in the reflection mode. The broadband characteristic is achieved due to the strong anisotropic behavior of the metasurface. The structure is robust to a wide range of incident angles as well. The proposed switchable multifunctional design can contribute to the development of active plasmonic polarization devices and metamaterial absorbers.
- 30 May 2023
- Published by Optica Publishing Group in Journal of the Optical Society of America A
- Vol. 40 (6) , 1183-1190
Multifunctional and switchable metamaterial for terahertz polarization modulation in the reflection mode
In this paper, a broadband multi-layered active metamaterial design is investigated, which can achieve a high polarization conversion efficiency over a wide band of frequencies in the terahertz regime. The design can be switched to an efficient metamaterial absorber using the phase transition property of vanadium dioxide (VO2). Additionally, the designed structure can convert the linear polarization of the incoming wavefronts to its cross-polarization and linear polarization to circular polarization in the reflection mode. The broadband characteristic is achieved due to the strong anisotropic behavior of the metasurface. The structure is robust to a wide range of incident angles as well. The proposed switchable multifunctional design can contribute to the development of active plasmonic polarization devices and metamaterial absorbers.