Xue-Shi Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xue-Shi Li has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
Yuanmei Xu
Guangdong University of Technology
14 shared publications- Qing Huo Liu
Eastern Institute of Technology
4 shared publications Weijun Sun
4 shared publicationsWen Zhang
School of Automation, Guangdong University of Technology 1 , Guangzhou 510006, Guangdong
4 shared publicationsJunyan Cheng
School of Automation, Guangdong University of Technology, Guangzhou, 510006 Guangdong, People’s Republic of China
3 shared publications- Kai-Da Xu
School of Information and Communications Engineering, Xi’an Jiaotong University, Xi’an 710049, China
3 shared publications
Latest Publications
- 4 September 2026
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 26 (3)
Dynamically tunable Fano sensor based on diode-reconfigurable spoof surface plasmons
- 4 September 2026
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 26 (3)
Dynamically tunable Fano sensor based on diode-reconfigurable spoof surface plasmons
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (18) , 27448-27457
A Dual-Band Reconfigurable Spoof Localized Surface Plasmon Sensor Based on Fano Resonance for Dielectric Sensing
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (18) , 27448-27457
A Dual-Band Reconfigurable Spoof Localized Surface Plasmon Sensor Based on Fano Resonance for Dielectric Sensing
- 13 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (2) , 1683-1695
Dual-Band Filtering Power Dividers With Arbitrary Power Division Ratio and Wide Harmonic Suppression
In this article, a new fusion design method is presented for developing dual-band filtering power dividers (FPDs) with arbitrary power division ratio and wide harmonic suppression. The design is based on a dual-band FPD with equal power division, which consists of a multimode resonator with three coupled lines (TCLs) structure cascaded at both the input and outputs. Based on this model, a dual-band FPD with unequal power division is designed by changing the TCL at the output to be asymmetric to generate different division ratio between two output ports. Furthermore, a modified dual-band FPD with cascaded low-pass units at the input port is developed, which achieves excellent out-of-band suppression. Compact low-pass units are introduced to enhance harmonic suppression and expand the bandwidth of the stopband. Two air-bridged isolation resistors are placed between the output ports to ensure good in-band isolation. The analytical design formulas for the proposed dual-band FPDs with equal and unequal power division ratios are given. For demonstration, two dual-band FPD prototypes with different division ratios are designed, fabricated, and tested. Experimental results show that the proposed designs can achieve wide harmonic suppression with good isolation and low insertion loss in two passbands. Good agreement between the measured results and the theoretical expectations confirms the validity of the proposed design concept.
- 13 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (2) , 1683-1695
Dual-Band Filtering Power Dividers With Arbitrary Power Division Ratio and Wide Harmonic Suppression
In this article, a new fusion design method is presented for developing dual-band filtering power dividers (FPDs) with arbitrary power division ratio and wide harmonic suppression. The design is based on a dual-band FPD with equal power division, which consists of a multimode resonator with three coupled lines (TCLs) structure cascaded at both the input and outputs. Based on this model, a dual-band FPD with unequal power division is designed by changing the TCL at the output to be asymmetric to generate different division ratio between two output ports. Furthermore, a modified dual-band FPD with cascaded low-pass units at the input port is developed, which achieves excellent out-of-band suppression. Compact low-pass units are introduced to enhance harmonic suppression and expand the bandwidth of the stopband. Two air-bridged isolation resistors are placed between the output ports to ensure good in-band isolation. The analytical design formulas for the proposed dual-band FPDs with equal and unequal power division ratios are given. For demonstration, two dual-band FPD prototypes with different division ratios are designed, fabricated, and tested. Experimental results show that the proposed designs can achieve wide harmonic suppression with good isolation and low insertion loss in two passbands. Good agreement between the measured results and the theoretical expectations confirms the validity of the proposed design concept.
- Open Access
- 15 September 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (11)
Tunable Fano resonance with high sensitivity customizable via deep learning
A resonator structure composed of a metal–insulator–metal (MIM) waveguide is proposed, incorporating an embedded inverted triangular ring and a groove, with graphene introduced as a tuning material. Device performance characterization was conducted using the finite element method. The designed resonator shifts the Fano resonant frequency up to 105 GHz by varying the Fermi energy level. In addition, employing a deep neural network architecture, by combining the properties of graphene, a two-dimensional (2D) tunable material, with the structure-optimized design, we present a method for designing transmission spectrum that can customize the resonance frequency according to the requirements. Focusing on improving the sensitivity and adaptability of the device, enabling dynamic frequency range adjustment, and maintaining a high sensitivity, the design scheme aims to provide a highly flexible and accurately tunable Fano resonator structure. The structure can be rapidly designed based on specified target requirements. Furthermore, two sets of reverse design computational results show that the mean square error of the inverse network on the test data set are 2.8×10−5 and 6.96×10−4, respectively. It highlights the robust performance of our method in realizing the reverse design of resonators on demand.
- 15 September 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (11)
Open AccessTunable Fano resonance with high sensitivity customizable via deep learning
A resonator structure composed of a metal–insulator–metal (MIM) waveguide is proposed, incorporating an embedded inverted triangular ring and a groove, with graphene introduced as a tuning material. Device performance characterization was conducted using the finite element method. The designed resonator shifts the Fano resonant frequency up to 105 GHz by varying the Fermi energy level. In addition, employing a deep neural network architecture, by combining the properties of graphene, a two-dimensional (2D) tunable material, with the structure-optimized design, we present a method for designing transmission spectrum that can customize the resonance frequency according to the requirements. Focusing on improving the sensitivity and adaptability of the device, enabling dynamic frequency range adjustment, and maintaining a high sensitivity, the design scheme aims to provide a highly flexible and accurately tunable Fano resonator structure. The structure can be rapidly designed based on specified target requirements. Furthermore, two sets of reverse design computational results show that the mean square error of the inverse network on the test data set are 2.8×10−5 and 6.96×10−4, respectively. It highlights the robust performance of our method in realizing the reverse design of resonators on demand.
- Open Access
Inverse Design of Tunable Graphene-Based Terahertz Metasurfaces via Deep Neural Network and SHADE Algorithm
The terahertz (THz) frequency range holds critical importance for next-generation, wireless communications and biomedical sensing applications. However, conventional metamaterial design approaches suffer from computationally intensive simulations and optimization processes that can extend over several months. This work presents an intelligent inverse design framework integrating deep neural network (DNN) surrogate modeling with success-history-based adaptive differential evolution (SHADE) for tunable graphene-based THz metasurfaces. Our DNN surrogate model achieves an exceptional coefficient of determination (R2 = 0.9984) while providing a four-order-of-magnitude acceleration compared with conventional electromagnetic solvers. The SHADE-integrated framework demonstrates 96.7% accuracy in inverse design tasks with an average convergence time of 10.2 s. The optimized configurations exhibit significant tunability through graphene Fermi level modulation, as validated by comprehensive electromagnetic field analysis. This framework represents a significant advancement in automated electromagnetic design and establishes a robust foundation for intelligent photonic systems across diverse frequency regimes.
Open AccessInverse Design of Tunable Graphene-Based Terahertz Metasurfaces via Deep Neural Network and SHADE Algorithm
The terahertz (THz) frequency range holds critical importance for next-generation, wireless communications and biomedical sensing applications. However, conventional metamaterial design approaches suffer from computationally intensive simulations and optimization processes that can extend over several months. This work presents an intelligent inverse design framework integrating deep neural network (DNN) surrogate modeling with success-history-based adaptive differential evolution (SHADE) for tunable graphene-based THz metasurfaces. Our DNN surrogate model achieves an exceptional coefficient of determination (R2 = 0.9984) while providing a four-order-of-magnitude acceleration compared with conventional electromagnetic solvers. The SHADE-integrated framework demonstrates 96.7% accuracy in inverse design tasks with an average convergence time of 10.2 s. The optimized configurations exhibit significant tunability through graphene Fermi level modulation, as validated by comprehensive electromagnetic field analysis. This framework represents a significant advancement in automated electromagnetic design and establishes a robust foundation for intelligent photonic systems across diverse frequency regimes.
- 14 August 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (9)
Inverse design of tunable high-sensitivity Fano resonators with black phosphorus utilizing deep learning
A deep learning-based inverse design approach is proposed to design tunable high-sensitivity Fano resonators efficiently. The approach parameterizes a planar micro-hole slab (PMS) covered with monolayer black phosphorus (BP) via a topologic strategy, then builds and trains a linear neural network (LNN) and customizes a differential evolution (DE) algorithm. By combining LNN and DE algorithm, the approach enables a fast and high-fidelity inverse design of the proposed Fano resonators. This work provides a comprehensive and efficient inverse design pipeline. Results show that the proposed approach can export the corresponding design from a target spectrum in less than a minute with a mean square error (MSE) value lower than 0.001. The designed tunable Fano resonator presents a maximum frequency shift of 100 GHz, by adjusting BP's doping concentration within the range of 0.01 × 1013 cm-2 to 1 × 1013 cm-2. Furthermore, a figure of merit (FOM) of sensitivity as high as 9,000 underscores the resonator’s exceptional sensing performance.
- 14 August 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (9)
Inverse design of tunable high-sensitivity Fano resonators with black phosphorus utilizing deep learning
A deep learning-based inverse design approach is proposed to design tunable high-sensitivity Fano resonators efficiently. The approach parameterizes a planar micro-hole slab (PMS) covered with monolayer black phosphorus (BP) via a topologic strategy, then builds and trains a linear neural network (LNN) and customizes a differential evolution (DE) algorithm. By combining LNN and DE algorithm, the approach enables a fast and high-fidelity inverse design of the proposed Fano resonators. This work provides a comprehensive and efficient inverse design pipeline. Results show that the proposed approach can export the corresponding design from a target spectrum in less than a minute with a mean square error (MSE) value lower than 0.001. The designed tunable Fano resonator presents a maximum frequency shift of 100 GHz, by adjusting BP's doping concentration within the range of 0.01 × 1013 cm-2 to 1 × 1013 cm-2. Furthermore, a figure of merit (FOM) of sensitivity as high as 9,000 underscores the resonator’s exceptional sensing performance.
- 23 January 2025
- Published by Elsevier in Neurocomputing
- Vol. 624
Adaptive lightweight network construction method for Self-Knowledge Distillation
- 23 January 2025
- Published by Elsevier in Neurocomputing
- Vol. 624
Adaptive lightweight network construction method for Self-Knowledge Distillation
- 8 January 2025
- Published by Elsevier in Optics Communications
- Vol. 578
Ultra-highly sensitive Fano resonator with dynamic tunability based on plasmonics
- 8 January 2025
- Published by Elsevier in Optics Communications
- Vol. 578
Ultra-highly sensitive Fano resonator with dynamic tunability based on plasmonics
- 26 September 2024
- Published by Elsevier in Journal of Power Sources
- Vol. 624
Engineering the conductive network of missing-linker metal-organic framework for improved performance in aqueous zinc-ion batteries
- 26 September 2024
- Published by Elsevier in Journal of Power Sources
- Vol. 624
Engineering the conductive network of missing-linker metal-organic framework for improved performance in aqueous zinc-ion batteries
- 15 September 2024
- Published by Elsevier in Materials Research Bulletin
- Vol. 181
In-situ synthesis of 3D TiO2 microspheres on Ti mesh to enhance photoelectrochemical water splitting
- 15 September 2024
- Published by Elsevier in Materials Research Bulletin
- Vol. 181
In-situ synthesis of 3D TiO2 microspheres on Ti mesh to enhance photoelectrochemical water splitting