Trevor J. Odelberg
Trevor J. Odelberg has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- David D. Wentzloff
University of Michigan
2 shared publications - Aman Gupta
University of Michigan
1 shared publication - Mason P. Obery
Department of Electrical Engineering, University of Michigan, 500 S. State Street, Ann Arbor, MI 48109, USA
1 shared publication - Peter W. Crary
Department of Electrical Engineering, University of Michigan, 500 S. State Street, Ann Arbor, MI 48109, USA
1 shared publication - Siyu Wang
Department of Electrical and Computer Engineering, University of Michigan, Ann Arbor, MI, USA
1 shared publication
Latest Publications
- Open Access
- 13 January 2025
- Published by MDPI AG in Information
- Vol. 16 (1) , 43
Low-Power Wake-Up Receivers for Resilient Cellular Internet of Things
Smart Cities leverage large networks of wirelessly connected nodes embedded with sensors and/or actuators. Cellular IoT, such as NB-IoT and 5G RedCap, is often preferred for these applications thanks to its long range, extensive coverage, and good quality of service. In these networks, wireless communication dominates power consumption, motivating research on energy-efficient yet resilient and robust wireless systems. Many IoT use cases require low latency but cannot afford high-power radios continuously operating to accomplish this. In these cases, wake-up receivers (WURs) are a promising solution: while the high-power main radio (MR) is turned off/idle, a lightweight WUR is continuously monitoring the RF channel; when it detects a wake-up sequence, the WUR will turn on the MR for subsequent communications. This article provides an overview of WUR hardware design considerations and challenges for 4G and 5G cellular IoT, summarizes the recent 3GPP activities to standardize NB-IoT and 5G wake-up signals, and presents a state-of-the-art WUR chip.
- 13 January 2025
- Published by MDPI AG in Information
- Vol. 16 (1) , 43
Open AccessLow-Power Wake-Up Receivers for Resilient Cellular Internet of Things
Smart Cities leverage large networks of wirelessly connected nodes embedded with sensors and/or actuators. Cellular IoT, such as NB-IoT and 5G RedCap, is often preferred for these applications thanks to its long range, extensive coverage, and good quality of service. In these networks, wireless communication dominates power consumption, motivating research on energy-efficient yet resilient and robust wireless systems. Many IoT use cases require low latency but cannot afford high-power radios continuously operating to accomplish this. In these cases, wake-up receivers (WURs) are a promising solution: while the high-power main radio (MR) is turned off/idle, a lightweight WUR is continuously monitoring the RF channel; when it detects a wake-up sequence, the WUR will turn on the MR for subsequent communications. This article provides an overview of WUR hardware design considerations and challenges for 4G and 5G cellular IoT, summarizes the recent 3GPP activities to standardize NB-IoT and 5G wake-up signals, and presents a state-of-the-art WUR chip.
- Open Access
- 10 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Solid-State Circuits Society
- Vol. 3, 225-238
Low-Power Heterodyne Receiver Architectures: Review, Theory, and Examples
The growth of the Internet of Things (IoT) has led to a massive upsurge in low-power radio research. Specifically, low-power receivers (RX) have been developed that efficiently receive data and extend the battery life for energy-constrained IoT systems. This has led to innovations in energy-detector (ED) first RXs which can achieve much lower power than traditional mixer-based heterodyne architectures. However, at such low-power levels, the RX performance is extremely limited. Oftentimes, low-power RXs have severe performance limitations, including lower data rate, limited blocker rejection, lower sensitivity, lower tolerance to PVT, limited modulation compatibility, and increased size and cost of off-chip components to achieve passive gain. This greatly limits the application of such RXs in real-world applications and prevents many of the low-power circuit techniques from translating to commercial standards. In this work, we look to motivate research into low-power heterodyne RX architectures which can support higher-order modulation and have improved RX specifications while retaining low-power.
- 10 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Solid-State Circuits Society
- Vol. 3, 225-238
Open AccessLow-Power Heterodyne Receiver Architectures: Review, Theory, and Examples
The growth of the Internet of Things (IoT) has led to a massive upsurge in low-power radio research. Specifically, low-power receivers (RX) have been developed that efficiently receive data and extend the battery life for energy-constrained IoT systems. This has led to innovations in energy-detector (ED) first RXs which can achieve much lower power than traditional mixer-based heterodyne architectures. However, at such low-power levels, the RX performance is extremely limited. Oftentimes, low-power RXs have severe performance limitations, including lower data rate, limited blocker rejection, lower sensitivity, lower tolerance to PVT, limited modulation compatibility, and increased size and cost of off-chip components to achieve passive gain. This greatly limits the application of such RXs in real-world applications and prevents many of the low-power circuit techniques from translating to commercial standards. In this work, we look to motivate research into low-power heterodyne RX architectures which can support higher-order modulation and have improved RX specifications while retaining low-power.