DADilipkumar Bhanudasji Alone

Dilipkumar Bhanudasji Alone

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dilipkumar Bhanudasji Alone has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Investigation of Transonic Flow Features in an Axial Flow Compressor Rotor

    by Lakshya Kumar, Dilipkumar B Alone, A M Pradeep, M T Shobhavathy, Satish Kumar S

    Numerical investigation of an axial flow rotor is carried out for its performance characterization and aerodynamic behavior during the design and off-design operating conditions. The study focuses on capturing the transonic flow features from the choke point (CP) to the near stall (NS) point in the rotor. This includes the analysis of passage shock structure, its movement in the blade passage with varying back-pressure, shock boundary layer interaction, tip leakage flow structure, and resulting losses. The study is carried out from 60 % to 100 % of the design speed using steady and unsteady RANS simulations. Three turbulence models, namely; SST, k-ε, and Reynolds stress models, are employed. The SST model predicted the closest approximation to the experimental data. The rotor aerodynamic performance is predicted in terms of total pressure ratio, efficiency, and flow contours. Unsteady analysis revealed that the primary and secondary tip leakage vortices, combined with the suction side tip corner separation, are the major instabilities near the stall region.


  • Open Access

    Evolution of unsteady secondary flow structures near the onset of stall in a tip-critical transonic axial flow compressor stage

    by Lakshya Kumar, Dilipkumar Bhanudasji Alone, A. M. Pradeep

    The aerodynamic stability of an axial compressor stage depends on the rotor and stator. However, due to the specific design requirements, the evolving flow field and the resulting secondary flow structures are different in both components. This study investigates the evolution of dominant secondary flow structures occurring in the rotor and stator of a tip-critical transonic compressor stage at the near-stall condition using unsteady numerical analysis and validates performance characteristics with the experimental data. The investigation reveals that the presence of rotor tip shock creates a large difference in the pressure gradient across the pressure surface and the suction surface, intensifying tip leakage flow and shock-induced boundary layer separation. The higher incidence angle near the hub leading edge creates a local separation and reattachment zone. The radial pressure gradient causes the low momentum flow from this local separation zone to migrate radially upward. This migrated flow interacts with the tip leakage flow and separated blade boundary layer, eventually creating a colossal recirculation zone and subsequent rotor blockage of around 46%. The increasing streamwise adverse pressure gradient pushes the tip shock upstream, and at the onset of the stall, the flow directly separates from the rotor leading edge avoiding the shock formation. The stator flow field is dominated by the asymmetric hub corner separation induced by the streamwise adverse pressure gradient and the tip corner separation caused by the vortex structures convected downstream from the rotor tip region leading to stator blockage of around 48%. Along with the blade passing frequency, four other dominating frequencies (0.06×BPF, 0.12×BPF, 0.44×BPF, and 0.84×BPF) related to the aerodynamic instabilities are observed at the inception of stall.


  • Profile Loss Investigations With a S-CO2 Axial Turbine Aerofoil

    by R. Senthil Kumaran, Dilipkumar B. Alone, Pramod Kumar

    Axial turbines are being extensively designed for supercritical carbon-di-oxide (S-CO2) Brayton cycle power blocks. But very little information is available in the open literature on the aerodynamics of S-CO2 axial turbines, their aerofoils and loss mechanisms. The understanding of real gas behavior of S-CO2 inside a turbine is still very far from complete. Profile losses contribute to more than 50% of overall losses in a turbine. Hence, estimation of profile losses at the outset of the design process is very important. In the present study, the mean section aerofoil of the first stage of a 5 MWe Brayton cycle high temperature turbine is investigated for profile loss characteristics. The basic aerodynamic characteristics of the aerofoil in a linear cascade were initially studied using CFD simulations and cascade test experiments with air as the fluid medium. The aerofoil cascade is then subjected to numerical simulations with S-CO2 as the fluid medium. CFD simulations were carried out using a commercial RANS solver with SST k-ω turbulence model for closure. Air was modelled as ideal gas and S-CO2 was modelled as real gas with Refrigerant Gas Property tables generated over the appropriate pressure and temperature ranges using NIST Refprop database. Losses are also calculated using Craig and Cox loss model. Experiments were carried out by testing a linear cascade model comprising 12 two dimensional blades, in a high-speed cascade wind tunnel. Cascade tests were carried out over a range of exit Mach numbers and incidence angles with air as the working medium. Losses, flow deflection and blade loading were measured during the experiments. Scaling of the profile losses between air and S-CO2 fluid mediums were examined over a range of Mach numbers, Reynolds numbers and incidence angles. Detailed analysis of data generated from numerical simulations, experiments and loss model (mainly in the transonic regime) are discussed in this paper. Losses with S-CO2 was 1.5% lower than that of air while the flow deflection roughly remained the same.