CGChanaka Galpaya

Chanaka Galpaya

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chanaka Galpaya has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Tracking microplastics in industrial effluents: Physicochemical characterization and removal performances

    by Lakshani Bhagya, Chanaka Galpaya, Jananji Chathurnika, Anjana Divyanjalee, Hasintha Wijesekara, Anushka Upamali Rajapaksha, Kaveenga Koswattage


  • Open Access

    Purification of Waste Cooking Oil Using Coconut Shell Derived Activated Carbon: Reduction in Free Fatty Acids and Quality Enhancement

    by Lasitha Madhusanka, Lakshan Priyankara, Isuranga Abejeewa, Rumesha Thathsarani, Helitha Nilmalgoda, Ashan Induranga, Chanaka Galpaya, Kaveenga Koswattage

    Waste cooking oil (WCO) from households and the food industry causes environmental pollution when improperly disposed of. Repeated oil use leads to oxidation, hydrolysis, and polymerization, increasing free fatty acids (FFAs) and degrading quality. This study evaluated coconut shell-derived activated carbon for WCO purification. Activated carbon was produced by carbonization at 450 °C for 3 h and KOH activation. Adsorption experiments used 2.5% (w/w) adsorbent in 450 mL WCO for 30–90 min. FFAs decreased from 0.286% to 0.049% (82.9%), pH increased from 4.62 to 5.91, and calorific value rose from 8981 to 9019 Cal/g, demonstrating suitability for biodiesel and circular economy applications.


  • Top Cited Papers
    Open Access

    Green Synthesis, Optimization, and Characterization of CuO Nanoparticles Using Tithonia diversifolia Leaf Extract

    by S. S. Millavithanachchi, M. D. K. M. Gunasena, G. D. C. P. Galpaya, H. V. V. Priyadarshana, S. V. A. A. Indupama, D. K. A. Induranga, W. A. C. N. Kariyawasam, D. V. S. Kaluthanthri, K. R. Koswattage

    Green synthesis of copper oxide (CuO) nanoparticles offers a sustainable alternative to conventional chemical methods that often involve toxic reagents and harsh conditions. This study investigates the use of Tithonia diversifolia, an invasive species in Sri Lanka, as a bioreductant for the eco-friendly fabrication of CuO nanoparticles. Using copper sulfate (CuSO4·5H2O) as a precursor, eight treatments were conducted by varying precursor concentration, temperature, and reaction time to determine optimal conditions. A visible color change in the reaction mixture initially indicated nanoparticle formation. Among all the conditions, treatment T4 (5 mM CuSO4, 80 °C, 2 h) yielded the most favorable results in terms of stability, morphology, and crystallinity. UV-Vis spectroscopic analysis confirmed the synthesis, with absorbance peaks between 265 and 285 nm. FTIR analysis revealed organic functional groups and characteristic metal–oxygen vibrations in the fingerprint region (500–650 cm−1), confirming formation. SEM imaging showed that particles were mainly spherical to polygonal, averaging 125–150 nm. However, dynamic light scattering showed larger diameters (~240 nm) due to surface capping agents. Zeta potential values ranged from −16.0 to −28.0 mV, indicating stability. XRD data revealed partial crystallinity with CuO-specific peaks. These findings support the potential of T. diversifolia in green nanoparticle synthesis, suggesting a low-cost, eco-conscious strategy for future applications.


  • Open Access

    Micro and Macro Analyses for Structural, Mechanical, and Biodegradability of a Pulp-Based Packaging Material: A Comprehensive Evaluation Using SEM, XRD, FTIR, and Mechanical Testing

    by H. M. D. U. Sewwandi, J. D. Chathuranga, W. G. C. M. Kulasooriya, D. K. A. Induranga, S. V. A. A. Indupama, G. D. C. P. Galpaya, M. K. D. M. Gunasena, H. V. V. Priyadarshana, K. R. Koswattage

    The extensive accumulation of plastic waste causes serious environmental problems, leading to growing interest in biodegradable alternatives. In this study, the structural, chemical, and crystalline characteristics of a pulp-based material incorporating sugarcane bagasse ash (SCBA) were investigated using Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), and Fourier Transform Infrared Spectroscopy (FTIR). Mechanical properties of the materials were investigated through compression, tensile, and bending tests in order to assess their strength and flexibility, while biodegradability was evaluated through soil burial tests. The results indicate that SCBA addition enhances compressive strength, with optimal performance obtained at 15% SCBA content, while tensile and bending strengths showed an enhancement at 5% content. FTIR and XRD analyses suggested an increase in amorphous regions and notable microstructural interactions between SCBA particles and cellulose fibers, particularly at a 10% concentration. SEM images further confirmed effective particle dispersion and improved porosity in the composite materials. Furthermore, samples incorporating SCBA exhibited superior biodegradability compared to pure pulp. Overall, these findings highlight that incorporating 10–15% SCBA provides a promising balance between mechanical integrity and environmental sustainability, offering a viable strategy for developing eco-friendly, high-performance packaging materials.


  • Open Access

    Analysis of the Development and Thermal Properties of Chitosan Nanoparticle-Treated Palm Oil: An Experimental Investigation

    by Varadharaja Kirthika, Chanaka Galpaya, Ashan Induranga, Amanda Sajiwanie, Vimukthi Vithanage, Kaveenga Rasika Koswattage

    This study is an effort to optimize the thermal properties of refined, bleached, and deodorized (RBD) oil by incorporating bionanoparticles. This study investigates the impact on thermal conductivity and thermal diffusivity by incorporating chitosan nanoparticles (CS-NPs) at different temperatures with varying weight fractions of NPs. To the best of our knowledge, these synthesized CS-NPs from oyster mushrooms (Pleurotus ostreatus) and commercial marine-sourced CS-NPs are used for the first time to prepare nanofluids. These nanofluids offer high potential for industrial applications due to their biodegradability, biocompatibility, and nontoxicity. Fungal-sourced chitosan is a vegan-friendly alternative and does not contain allergic compounds, such as marine-sourced chitosan. The CS-NPs were synthesized using a chemical and mechanical treatment process at three different amplitudes, and CS-NPs at amplitude 80 were selected to prepare the nanofluid. Chitin, chitosan, and CS-NPs were characterized by the FTIR-ATR method, while the size and morphology of the CNs were analyzed by SEM. Thermal conductivity and thermal diffusivity of nanofluids and base fluid were measured using a multifunctional thermal conductivity meter (Flucon LAMBDA thermal conductivity meter) by ASTM D7896-19 within the temperature range 40–160 °C with step size 20. The thermal conductivity values were compared between commercial CS-NPs and synthesized CS-NPs treated with RBD palm olein with different weight percentages (0.01, 0.05, and 0.1 wt.%). It was confirmed that the thermal properties were enhanced in both kinds of nanoparticles added to RBD palm olein, and higher enhancement was observed in fungal-sourced CS-NPs treated with RBD palm olein. Maximum enhancement of thermal conductivity of commercial and synthesized CS-NPs treated with RBD palm olein were 4.28% and 7.33%, respectively, at 0.05 wt.%. Enhanced thermal conductivity of RBD palm olein by the addition of CS-NPs facilitates more effective heat transfer, resulting in quicker and more consistent cooking and other potential heat transfer applications.


  • Open Access

    Nanoparticle-Enhanced Engine Oils for Automotive Applications: Thermal Conductivity and Heat Capacity Improvements

    by G. D. C. P. Galpaya, M. D. K. M. Gunasena, D. K. A. Induranga, H. V. V. Priyadarshana, S. V. A. A. Indupama, E. R. J. M. D. D. P. Wijesekara, M. I. Ishra, M. M. M. G. P. G. Mantilaka, K. R. Koswattage

    The poor thermal and physical properties of conventional engine oils limit vehicle performance and durability. This research aims to investigate the effect of nanoparticles such as fullerene C60, titanium dioxide (TiO2), iron oxide (Fe2O3), and reduced graphene oxide (rGO) nanoparticles on 10W30 Mobil engine oil. In this study, the effect of nanoparticle concentrations at different mass fractions (0.01, 0.05, and 0.1) was examined within the temperature range 30–120 °C. The nanofluids were prepared using a two-step direct mixing method and thermal properties were measured using a LAMBDA thermal conductivity meter, which uses the transient hot wire method according to the ISO standards. Due to the low concentrations of the nanofluids, surfactants were not required at all, and the stability of the nanofluids was visually monitored over a period of four weeks. Accordingly, the largest improvement in thermal conductivity occurred with TiO2/10W30 at a mass fraction of 0.1 wt.% at 80 °C, and the specific heat capacity improved due to Fe2O3/10W30 addition at a mass fraction of 0.1 at 70 °C; these were 5.8% and 14.4%, respectively, for the base oil. Thermal diffusivity remained largely unaffected by the addition of the nanoparticles, and fullerene C60 showed no significant effect on any thermal property. It was concluded that the thermal properties of the engine oil were considerably enhanced by the added nanoparticles at different weight fractions and temperature values.


  • Open Access

    From Nature to Innovation: Advances in Nanocellulose Extraction and Its Multifunctional Applications

    by A. M. P. Hansini, G. D. C. P. Galpaya, M. D. K. M. Gunasena, P. M. Abeysundara, V. Kirthika, L. Bhagya, H. D. C. N. Gunawardana, K. R. Koswattage

    Nanocellulose obtained from renewable and abundant biomass has garnered significant attention as a sustainable material with exceptional properties and diverse applications. This review explores the key aspects of nanocellulose, focusing on its extraction methods, applications, and future prospects. The synthesis of nanocellulose involves mechanical, chemical, and biological techniques, each uniquely modifying the cellulose structure to isolate cellulose nanocrystals (CNCs), cellulose nanofibers (CNFs), or bacterial nanocellulose (BNC). These methods provide tailored characteristics, enabling applications across a wide range of industries. Nanocellulose’s remarkable properties, including high mechanical strength, large surface area, thermal stability, and biodegradability, have propelled its use in packaging, electronics, biomedicine, and environmental remediation. It has shown immense potential in enhancing the mechanical performance of composites, improving water purification systems, and serving as a scaffold for tissue engineering and drug delivery. However, challenges related to large-scale production, functionalization, regulatory frameworks, and safety concerns persist, necessitating further research and innovation. This review emphasizes the need for sustainable production strategies and advanced functionalization techniques to harness nanocellulose’s full potential. As an eco-friendly, high-performance material, nanocellulose presents a promising avenue for addressing global sustainability challenges while offering transformative solutions for various industries.


  • Open Access

    Comparative Energy and Environmental Analysis of Combined Cycle CHP Combustion Operations via Simulation for Biomass and Industrial Materials Derived from Waste

    by Dasith Wijesekara, Lasitha Kularathna, Pawani Abesundara, Udayangani Lankathilaka, Imesha Muhandiram, Prasad Amarasinghe, Shakya Abesinghe, Chanaka Galpaya, Kaveenga Koswattage

    The Combined Cycle Combined Heat and Power (CCCHP) systems are an effective way to improve energy efficiency and reduce emissions. This paper examines the energy and environmental impact of CCCHP combustion using waste biomass like the biomass of spent wash (SW), waste crankcase oil (WCO), and bagasse (BA) using an advanced Ebsilon Professional 16 software simulation model. The simulations were designed to achieve 150 MW total power output and 25 MW heating energy. Simulation results indicate that the minimum fuel feed requirement of a 10.762 kg/s flow rate was recorded at the highest calorific value (CV) fuel briquette of 1:8 ratio BA–WCO. The BA–WCO system demonstrates a significantly higher heat recovery capacity in the heat recovery steam generator (HRSG) compared to the BA–SW system. At a 1:8 ratio, it recovers 1463 kJ/kg versus 583 kJ/kg, and 1391 kJ/kg versus 498 kJ/kg at a 1:3 ratio. The CCCHP efficiency was much higher for BA–WCO than those developed from spent wash–bagasse, yielding up to 41.1% compared to a maximum of 26.71%. Furthermore, the BA–WCO system showed a better result than the BA–SW CCCHP system by emitting a low amount of flue gas with low temperature.


  • Open Access

    Nanofluids for Heat Transfer: Advances in Thermo-Physical Properties, Theoretical Insights, and Engineering Applications

    by Ashan Induranga, Chanaka Galpaya, Vimukthi Vithanage, Amalka Indupama, Kaveendra Maduwantha, Niroshan Gunawardana, Dasith Wijesekara, Prasad Amarasinghe, Helitha Nilmalgoda, Kasundi Gunasena, et al.

    Nanofluids, fluids with different suspended nanoparticles, have shown improved thermo-physical properties in recent research outputs, and they have emerged as promising alternatives for the industrial fluids used in numerous heat exchange applications. Much research has been conducted around the world to develop heat transfer fluids with optimum thermo-physical properties with the help of nanotechnology, especially in the 21st century. Following the latest research outcomes, nanofluids with base fluids of industrially used coolants, such as water, engine oil, transformer oil, electronic coolants, etc., have shown imposing thermo-physical properties compared to their base fluid. Identifying the nanofluids with high performances and lesser practical obstacles to be used as heat transfer fluids is vital. This paper reviews the thermo-physical property improvements of nanofluid properties, such as thermal conductivity, viscosity, density, specific heat capacity, and flash point, along with their theoretical models. Recent studies on using surfactants to improve the stability of nanofluids are also included in this review. The next part of the study reviews the latest research outputs on the thermo-physical properties of nanofluids in applications in engineering disciplines. Later, research on molecular dynamics simulations of nanofluids are discussed. As the final section, this paper presents Nanofluid research related to neural network modeling. Cumulatively, this paper presents a comprehensive review of recent nanofluids research, along with theoretical developments. This review is a cumulative study of the recent studies of nanofluid research in different disciplines. Most of the recent reviews focused on specific applications of nanofluids and do not cover the field from the basics of the nanofluids to their applications. However, this review covers all the aspects of the nanofluid field, along with several important engineering applications.


  • Open Access

    Advancements in Bio-Nanotechnology: Green Synthesis and Emerging Applications of Bio-Nanoparticles

    by M. D. K. M. Gunasena, G. D. C. P. Galpaya, C. J. Abeygunawardena, D. K. A. Induranga, H. V. V. Priyadarshana, S. S. Millavithanachchi, P. K. G. S. S. Bandara, K. R. Koswattage

    The field of bio-nanotechnology has seen significant advancements in recent years, particularly in the synthesis and application of bio-nanoparticles (BNPs). This review focuses on the green synthesis of BNPs using biological entities such as plants, bacteria, fungi, and algae. The utilization of these organisms for nanoparticle synthesis offers an eco-friendly and sustainable alternative to conventional chemical and physical methods, which often involve toxic reagents and high energy consumption. Phytochemicals present in plant extracts, unique metabolic pathways, and biomolecules in bacteria and fungi, and the rich biochemical composition of algae facilitate the production of nanoparticles with diverse shapes and sizes. This review further explores the wide-ranging applications of BNPs in various fields like therapeutics, fuel cells, energy generation, and wastewater treatment. In therapeutics, BNPs have shown efficacy in antimicrobial, anti-inflammatory, antioxidant, and anticancer activities. In the energy sector, BNPs are being integrated into fuel cells and other energy generation systems like bio-diesel to improve efficiency and sustainability. Their catalytic properties and large surface area enhance the performance of these devices. Wastewater treatment is another critical area where BNPs are employed for the removal of heavy metals, organic pollutants, and microbial contaminants, offering a cost-effective and environmentally friendly solution to water purification. This comprehensive review highlights the potential of bio-nanoparticles synthesized through green methods. It highlights the need for further research to optimize synthesis processes, understand mechanisms of action, and expand the scope of their applications. BNPs can be utilized to address advantages and some of the pressing challenges in medicine, energy, and environmental sustainability, paving the way for innovative and sustainable technological advancements in future prospects.