ZZZhen Jun Zhai

Zhen Jun Zhai

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zhen Jun Zhai has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Design of a Wideband THz 2-D Spatial Power Combiner Based on Mode Conversion Method

    by Zhen Jun Zhai, Feng Lin, Kai Qiang Zhu, Hou Jun Sun, Hao-Chen Mao, Geng-Bo Wu, Yang Yang

    This article presents a wideband terahertz (THz) 2-D ${M} \times {M}$ spatial power combiner (SPC) based on a mode conversion method. It consists of a transmitting array, a transmitarray (TA), and a receiving antenna, which are integrated in a sealed metal cavity. The TA provides phase manipulation to transform the TE10-mode ${M} \times {M}$ beams from the transmitting array to the Gaussian beam matched with the receiving antenna. The proposed SPC achieves efficient power combining in a wide bandwidth by designing the low-loss dielectric TA elements with a linear phase shift and a wideband transmitting/receiving antenna. A 3-D printed $4\times 4$ THz SPC is designed and fabricated. The measured output and input return loss are greater than 12 and 9 dB, respectively, and the combining efficiency is 54%~74% within 230–325 GHz (34.2%). The proposed ${M} \times {M}$ THz SPC can be applied for THz high-power sources based on photodiodes.


  • Design of 3-D Printed Wideband THz Spatial Power Dividers Based on Two-Stage Phase Optimization Method for Heterodyne Detector Array Applications

    by Zhen Jun Zhai, Feng Lin, Ka Fai Chan, Hou Jun Sun, Geng-Bo Wu

    This article presents a 3-dimensional (3-D) printed wideband $M$ $\times$ $M$ terahertz (THz) spatial power divider (SPD) based on the two-stage phase optimization method. It consists of a feed source and two cascading transmitarrays (TAs), providing independent manipulation of amplitude and phase for $M$ $\times$ $M$ focuses. To generate the electric field distribution with equal amplitude and phase for $M$ $\times$ $M$ focuses with a small separation, a two-stage phase optimization method is proposed to tune the phases of TAs. The electric field distribution on the target plane with $M$ $\times$ $M$ focuses remains constant within a wide bandwidth by using the height-varying dielectric TA element with a linear phase shift. Two 270-GHz 3-D printed 2 $\times$ 2 and 4 $\times$ 4 THz SPDs with a focus separation of 2.2 mm are designed and fabricated. For the 2 $\times$ 2 and 4 $\times$ 4 THz SPDs, the measured amplitude and phase imbalances are in the range of 0.2–0.7 dB and 6 $^{\circ}$ –10 $^{\circ}$ within 230–320 GHz for the former and 1–1.6 dB and 9 $^{\circ}$ –17 $^{\circ}$ within 250–310 GHz for the latter. The proposed wideband $M$ $\times$ $M$ THz SPD can be applied for THz heterodyne detector array applications.


  • A Filtering Patch Antenna With Reconfigurable Quad-Polarization Diversity

    by Yiqing Sun, Feng Lin, De Hao Zhao, Zhen Jun Zhai, Hou Jun Sun, Xiu Yin Zhang

    This paper presents a filtering patch antenna with reconfigurable quad-polarization diversity. By loading parasitic patches and a Jerusalem-cross-shaped metal strip on a patch antenna, two radiation nulls are introduced to realize frequency selectivity. Then, to achieve reconfigurability, a feeding network with four switchable output modes is proposed. By switching the PIN diodes, the antenna realizes vertical linear-polarized (V-LP), horizontal linear-polarized (H-LP), left-hand circular-polarized (LHCP) and right-hand circular-polarized (RHCP) radiations while maintaining its intrinsic filtering characteristic. A prototype operating at 2.28 GHz is fabricated, and the measured 10-dB overlapped bandwidth of the four polarization states is 5.7%. The peak gains for the four states are higher than 6.65 dBi, and the overlapped 3-dB AR bandwidth is 7.89%.


  • Additively Manufactured Wideband Low-Profile Bidirectional 2-D Beam-Scanning Antenna Using Double Folded Transmitarrays With Curved Polarizers

    by Zhenjun Zhai, Feng Lin, Yang Yang, Houjun Sun

    This paper presents a wideband low-profile bidirectional two-dimensional (2-D) beam-scanning antenna for millimeter-wave applications. It achieves independently controlled bidirectional beams by two orthogonally mirrored folded transmitarrays (TAs) overlapping in space, significantly reducing the antenna profile. The folded TA consists of a feed source, a curved polarizer and a receive-transmit (R-T) array. The feed source is realized by an all-metal wideband miniaturized magnetoelectric (ME) dipole based on the metal 3D-printing technique. The curved metal grating acts as a polarizer, which achieves reflection and transmission for y-polarized and x-polarized waves, respectively. Using the additively manufactured electronics (AME) technique, the R-T array element is realized by two wideband tightly coupled bow-tie dipole antennas connected by a pair of differential microstrip-line phase shifters with true-time delay and continuous 360° tuning range. Finally, 2-D beam scanning with constant beam direction across the operation band is achieved by adjusting the polarizer along the x - and y-directions. The height diameter ratio ( H/D ) is 0.5, while the measured 2-D bidirectional beam scanning range covers ±10° in both the E- and H-planes within 27 ~ 39 GHz, with a maximum scan loss of 1.9 dB. The measured peak gain is 27.1 dBi, and the maximum aperture efficiency is 53.4%. The measured 1-dB and 3-dB overlapped gain bandwidths for 0° and 180° beams are 30 ~ 36.2 GHz (18.7%) and 27~40 GHz (38.8%), respectively.


  • A Wideband Thin Transmitarray Antenna by Using L-Probe Patch Antenna With True-Time Delay

    by Zhen Jun Zhai, Feng Lin, Guo Qiang Zhao, Hou Jun Sun

    This paper presents a wideband thin transmitarray (TA) antenna by using low-profile L-probe patch antennas, which act as the receiving and transmitting antennas of the TA element. The receiving and transmitting antennas are connected by a microstrip-line phase shifter with true-time delay, so the TA element maintains low transmission loss and linear phase-shift characteristic within a wide frequency range. The continuous 360° phase shift is obtained by rotating the receiving antenna and changing the length of microstrip-line phase shifter, which is integrated with the L-probe of receiving antenna in the same substrate. Thus, the TA antenna achieves a high aperture efficiency, wide gain bandwidth with a reduced profile. For verification, a prototype of 132-element TA antenna operating at 14 GHz is fabricated and measured. The size of the element is 0.42 λ 0 × 0.42 λ 0 , and the thickness of TA antenna is 0.13 λ 0 (λ 0 is the wavelength in free space at the lowest working frequency). The measured peak gain is 22.2 dBi and the maximum aperture efficiency is 50.7%. The measured 1-dB gain bandwidth is from 12.6 to 15.2 GHz (18.7%). The measured results also show a good radiation pattern with low cross polarization of 30 dB.


  • Design of Nonreciprocal Filtering Antenna Using Spatio-Temporal Modulated SIW Resonators

    by Dehao Zhao, Feng Lin, Zhenjun Zhai, Houjun Sun, Xiu Yin Zhang

    This article reports on, for the first time, the design of nonreciprocal filtering antennas using spatio-temporal modulated substrate integrated waveguide (SIW) resonators. It consists of two SIW cavities and a half-mode SIW (HMSIW) cavity, which is designed as the last-stage resonator and the radiator. By integrating time-modulated capacitors on the surface gaps of the three cavities, the nonreciprocal radiation patterns in transmission and reception modes are achieved at the same operating frequency. Three radiation nulls are generated due to the cross-coupling in the time-modulated network and source-load coupling. The theoretical analysis of the co-designed nonreciprocal SIW filtering antenna is detailed, along with methods for its co-simulations and measurements. For the proof-of-concept demonstration, a nonreciprocal SIW filtering antenna operating at 2.4 GHz is designed and fabricated. The measured 10-dB bandwidth and peak gain are 1.7% and 2.6 dBi, respectively. The measured realized gains at transmission and reception show that the reverse isolation is greater than 11 dB within a bandwidth of 30 MHz. The frequency selectivity values are 756 and 368 dB/GHz at the left and right sides of the passband, respectively.