Yuhao Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yuhao Li has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
- Kurt O. Konhauser
Department of Earth and Atmospheric Sciences, University of Alberta
8 shared publications - Daniel S. Alessi
Department of Earth and Atmospheric Sciences, University of Alberta, Edmonton, AB, T6G 2E3, Canada
5 shared publications - Andrey M. Ilin
Geo- and Environmental Research Centre (GUZ), Eberhard Karls University Tuebingen, Tuebingen, Germany
3 shared publications - Leslie J. Robbins
University of Regina
3 shared publications - Murray K. Gingras
Department of Earth and Atmospheric Sciences, University of Alberta
3 shared publications - Weiduo Hao
Northwest University
3 shared publications
Latest Publications
- Open Access
- 9 January 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (2) , eaea1035
Genomic adaptation strategies to habitat switching in Korarchaeota
Korarchaeota, an ancient lineage of archaea, has long been overlooked in discussions of archaeal and eukaryotic evolution. Their physiology and evolutionary history have remained enigmatic due to their rarity in natural environments. Here, we assembled 101 Korarchaeota genomes from different seafloor hydrothermal vents and terrestrial hot springs, revealing that Korarchaeota lineages have undergone multiple transitions between marine and terrestrial habitats. These transitions were accompanied by genomic shifts reflecting adaptations to habitat-specific physicochemical conditions, including variations in nutrient availability, potential energy sources, osmotic conditions, and viral predation stresses. Molecular dating suggests that Korarchaeota originated ~2.84 billion years (Ga) ago, with three subsequent diversification events occurring around 2.42, 1.52, and 1.29 Ga ago. These major diversifications coincide with key geological events such as the Great Oxidation Event and the breakup and formation of supercontinents. Our findings provide insights into the evolutionary trajectory and ecological adaptations of Korarchaeota, thereby enhancing our understanding of microbial coevolution with Earth’s dynamic surface environments.
- 9 January 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (2) , eaea1035
Open AccessGenomic adaptation strategies to habitat switching in Korarchaeota
Korarchaeota, an ancient lineage of archaea, has long been overlooked in discussions of archaeal and eukaryotic evolution. Their physiology and evolutionary history have remained enigmatic due to their rarity in natural environments. Here, we assembled 101 Korarchaeota genomes from different seafloor hydrothermal vents and terrestrial hot springs, revealing that Korarchaeota lineages have undergone multiple transitions between marine and terrestrial habitats. These transitions were accompanied by genomic shifts reflecting adaptations to habitat-specific physicochemical conditions, including variations in nutrient availability, potential energy sources, osmotic conditions, and viral predation stresses. Molecular dating suggests that Korarchaeota originated ~2.84 billion years (Ga) ago, with three subsequent diversification events occurring around 2.42, 1.52, and 1.29 Ga ago. These major diversifications coincide with key geological events such as the Great Oxidation Event and the breakup and formation of supercontinents. Our findings provide insights into the evolutionary trajectory and ecological adaptations of Korarchaeota, thereby enhancing our understanding of microbial coevolution with Earth’s dynamic surface environments.
- Open Access
- 20 November 2025
- Published by Springer Nature in Communications Earth & Environment
- Vol. 6 (1)
Novel pathway of chalcopyrite formation at low temperature in microenvironments of acidic, metal-rich sediments
- 20 November 2025
- Published by Springer Nature in Communications Earth & Environment
- Vol. 6 (1)
Open AccessNovel pathway of chalcopyrite formation at low temperature in microenvironments of acidic, metal-rich sediments
- Open Access
- 26 July 2025
- Published by Elsevier in Geochimica et Cosmochimica Acta
- Vol. 404, 202-222
Impact of silica on the identity of minerals formed in Archean oceans during Fe cycling by cyanobacteria and iron(III)-reducing bacteria
- 26 July 2025
- Published by Elsevier in Geochimica et Cosmochimica Acta
- Vol. 404, 202-222
Open AccessImpact of silica on the identity of minerals formed in Archean oceans during Fe cycling by cyanobacteria and iron(III)-reducing bacteria
- Open Access
- 24 May 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-12
Bioavailable phosphite in the surface ocean during the Great Oxidation Event
Phosphorus availability has influenced the co-evolution of life and Earth’s environments. While phosphate was likely the main phosphorus source for life during the Archean, phosphite (HPO3 2 −) gained importance leading up to the Great Oxidation Event (GOE). However, the concentration of phosphite in seawater at that time, and the processes driving this shift in P utilization, remain poorly constrained. Using lab experiments and phosphite data from banded iron formations (BIFs), we show that hydrous ferric oxides (HFO) preferentially remove phosphate over phosphite. This suggests that shallow seawater at the onset of the GOE could have contained up to 0.17 µM phosphite, comprising 5–88% of total dissolved inorganic phosphorus. We propose that phosphate depletion driven by HFO adsorption and microbial competition may have promoted the use of phosphite as an alternative P source.
- 24 May 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-12
Open AccessBioavailable phosphite in the surface ocean during the Great Oxidation Event
Phosphorus availability has influenced the co-evolution of life and Earth’s environments. While phosphate was likely the main phosphorus source for life during the Archean, phosphite (HPO3 2 −) gained importance leading up to the Great Oxidation Event (GOE). However, the concentration of phosphite in seawater at that time, and the processes driving this shift in P utilization, remain poorly constrained. Using lab experiments and phosphite data from banded iron formations (BIFs), we show that hydrous ferric oxides (HFO) preferentially remove phosphate over phosphite. This suggests that shallow seawater at the onset of the GOE could have contained up to 0.17 µM phosphite, comprising 5–88% of total dissolved inorganic phosphorus. We propose that phosphate depletion driven by HFO adsorption and microbial competition may have promoted the use of phosphite as an alternative P source.
- Open Access
- 26 March 2025
- Published by Springer Nature in Research Square
Microbial mediation in chalcopyrite formation at low temperature
Chalcopyrite (CuFeS 2 ) is an important source of copper, typically found in high-temperature ore deposits. Its precipitation at low temperature has been rarely documented and remains a topic of debate. In this study, we report the transformation of copper sulfide to a Cu-Fe phase with chalcopyrite-like stoichiometry in acidic pit lake sediments at 12 °C. Scanning/Transmission Electron Microscopy (STEM) revealed aggregates of acicular nanocrystals, and X-ray Absorption Spectroscopy indicated characteristics of disordered chalcopyrite. Incubation experiments at 20 °C suggest that microbial activity may play an important role in chalcopyrite formation at low temperature, also supported by geochemical modelling. Remarkably, STEM analysis showed chalcopyrite crystal formation around hollow structures resembling coccoidal cells (external molds). Additionally, cryo-Transmission X-ray microscopy identified chalcopyrite precipitation on the membranes of eukaryotic cells. We propose that microbial processes, including bacterial production of H 2 S and the availability of nucleation sites on outer cellular surfaces, promote chalcopyrite formation at low temperatures.
- 26 March 2025
- Published by Springer Nature in Research Square
Open AccessMicrobial mediation in chalcopyrite formation at low temperature
Chalcopyrite (CuFeS 2 ) is an important source of copper, typically found in high-temperature ore deposits. Its precipitation at low temperature has been rarely documented and remains a topic of debate. In this study, we report the transformation of copper sulfide to a Cu-Fe phase with chalcopyrite-like stoichiometry in acidic pit lake sediments at 12 °C. Scanning/Transmission Electron Microscopy (STEM) revealed aggregates of acicular nanocrystals, and X-ray Absorption Spectroscopy indicated characteristics of disordered chalcopyrite. Incubation experiments at 20 °C suggest that microbial activity may play an important role in chalcopyrite formation at low temperature, also supported by geochemical modelling. Remarkably, STEM analysis showed chalcopyrite crystal formation around hollow structures resembling coccoidal cells (external molds). Additionally, cryo-Transmission X-ray microscopy identified chalcopyrite precipitation on the membranes of eukaryotic cells. We propose that microbial processes, including bacterial production of H 2 S and the availability of nucleation sites on outer cellular surfaces, promote chalcopyrite formation at low temperatures.
- 1 June 2024
- Published by Geological Society of South Africa in South African Journal of Geology
- Vol. 127 (2) , 359-378
Cyanobacteria-ferrihydrite aggregates, BIF sedimentation and implications for Archaean- Palaeoproterozoic seawater geochemistry
Precambrian banded iron formations (BIFs) are iron- and silica-rich (bio)chemical sediments that are widely believed to have been precipitated by microbial oxidation of dissolved Fe(II). The by-product of these metabolisms – insoluble ferric iron – would have settled through the water column, often as aggregates with the cell biomass. While the mineralogy, composition and physical properties of cell-iron mineral aggregates formed by anaerobic Fe(II)-oxidising photoferrotrophic bacteria have been extensively studied, there are limited studies that characterise cyanobacteria-iron mineral aggregates that formed during oxygenic photosynthesis. This gap in knowledge is important because it impacts sedimentation velocities and the Fe(III) to organic carbon (Corg) ratios in the marine sediment pile. Here, we used a recently introduced approach to precisely measure the sedimentation velocity of cyanobacteria-ferrihydrite aggregates and the Fe(III):Corg ratios of the cyanobacteria-ferrihydrite aggregates over a wide range of pH and initial Fe(II) concentrations under predicted Palaeoproterozoic atmospheric conditions. Our results indicate that it was highly unlikely BIFs formed at pH <7 via chemical oxidation due to the insufficient sedimentation velocity, even at the maximum predicted Fe(II) concentration of 1800 μM with excess oxygen. Instead, large Banded Iron Formation (BIF) deposits, such as those associated with the ca. 2.47 Ga Kuruman Formation in South Africa, would only had been deposited at minimum Fe(II) concentrations of 500 μM at pH 7 or 250 μM at pH 8. The Fe:Corg ratios in cyanobacteria-ferrihydrite sediments formed during initially anoxic Fe(II) oxidation experiments represent the maximum values under each condition because we specifically extracted samples after all Fe(II) was oxidised. The Fe(III) to organic carbon ratio was consistently below 4, which is also the ratio required for dissimilatory Fe(III) reduction (DIR). This result indicates that biomass in this case was in excess, which contradicts the low organic carbon content seen in most BIFs. Thus, we suggest that biomass was either physically separated from ferrihydrite aggregates during sedimentation under the influence of ocean currents and waves, or it was degraded prior to DIR. The mineralogical and geochemical evidences of both oxide and carbonate facies from the Kuruman Iron Formation (IF) suggest that ferrihydrite was most likely the precursor along with a significant initial organic carbon input, supporting the proposed cyanobacterially-mediated BIF depositional model and experimental results.
- 1 June 2024
- Published by Geological Society of South Africa in South African Journal of Geology
- Vol. 127 (2) , 359-378
Cyanobacteria-ferrihydrite aggregates, BIF sedimentation and implications for Archaean- Palaeoproterozoic seawater geochemistry
Precambrian banded iron formations (BIFs) are iron- and silica-rich (bio)chemical sediments that are widely believed to have been precipitated by microbial oxidation of dissolved Fe(II). The by-product of these metabolisms – insoluble ferric iron – would have settled through the water column, often as aggregates with the cell biomass. While the mineralogy, composition and physical properties of cell-iron mineral aggregates formed by anaerobic Fe(II)-oxidising photoferrotrophic bacteria have been extensively studied, there are limited studies that characterise cyanobacteria-iron mineral aggregates that formed during oxygenic photosynthesis. This gap in knowledge is important because it impacts sedimentation velocities and the Fe(III) to organic carbon (Corg) ratios in the marine sediment pile. Here, we used a recently introduced approach to precisely measure the sedimentation velocity of cyanobacteria-ferrihydrite aggregates and the Fe(III):Corg ratios of the cyanobacteria-ferrihydrite aggregates over a wide range of pH and initial Fe(II) concentrations under predicted Palaeoproterozoic atmospheric conditions. Our results indicate that it was highly unlikely BIFs formed at pH <7 via chemical oxidation due to the insufficient sedimentation velocity, even at the maximum predicted Fe(II) concentration of 1800 μM with excess oxygen. Instead, large Banded Iron Formation (BIF) deposits, such as those associated with the ca. 2.47 Ga Kuruman Formation in South Africa, would only had been deposited at minimum Fe(II) concentrations of 500 μM at pH 7 or 250 μM at pH 8. The Fe:Corg ratios in cyanobacteria-ferrihydrite sediments formed during initially anoxic Fe(II) oxidation experiments represent the maximum values under each condition because we specifically extracted samples after all Fe(II) was oxidised. The Fe(III) to organic carbon ratio was consistently below 4, which is also the ratio required for dissimilatory Fe(III) reduction (DIR). This result indicates that biomass in this case was in excess, which contradicts the low organic carbon content seen in most BIFs. Thus, we suggest that biomass was either physically separated from ferrihydrite aggregates during sedimentation under the influence of ocean currents and waves, or it was degraded prior to DIR. The mineralogical and geochemical evidences of both oxide and carbonate facies from the Kuruman Iron Formation (IF) suggest that ferrihydrite was most likely the precursor along with a significant initial organic carbon input, supporting the proposed cyanobacterially-mediated BIF depositional model and experimental results.
- Open Access
- 17 October 2023
- Published by Pensoft Publishers in ARPHA Conference Abstracts
- Vol. 6, e108666
Using a novel approach to characterize the surface reactivities of silica-rich ferrihydrite and biogenic cyanobacteria-ferrihydrite aggregates and the implications for Archean ocean geochemistry
Precambrian banded iron formations (BIF) are iron- and silica-rich chemical sedimentary rocks that are commonly used as paleo-redox proxies for Archean and Paleoproterozoic seawater geochemistry. At the onset of the Great Oxidation Event (herein GOE) around 2.4 Ga, cyanobacteria flourished with increasing nutrient fluxes due to oxidative weathering on land. In turn, this led to increased primary productivity that facilitated the permanent shift from a reducing Earth atmosphere to an oxidizing one. Interestingly, the duration of GOE also overlapped with one of the most prolific periods of BIF deposition.It is widely accepted that cyanobacteria were likely responsible for BIF formation during the GOE. Oxidation of dissolved Fe(II) by oxygen produced from cyanobacteria forms a metastable and amorphous mineral phase ferrihydrite, Fe(OH)3. As an essential component in both ancient BIF deposits and various modern ecosystems, the surface reactivity of ferrihydrite has been extensively studied under different conditions (i.e., pH and ionic strengths). Not only are the highly reactive surfaces of ferrihydrite particles important shuttles for trace element transport from the water column to the sediment pile, but previous studies have also demonstrated that cyanobacterial cells and ferrihydrite tend to aggregate at seawater pH. This means that ferrihydrite was also a vector for the transport of organic carbon to the seafloor. However, a complicating issue is how co-ions affect the surface reactivity of ferrihydrite, specifically dissolved silica which was abundant in ancient seawater. Although previous studies have demonstrated that silica can passivate the surface reactivity of ferrihydrite, what remains unclear is how silica impacts ferrihydrite-biomass aggregation. To fill this knowledge gap, we formed both silica-spiked ferrihydrite and cyanobacteria-ferrihydrite aggregates in situ and subsequently conducted empirical potentiometric acid-base titrations and Cd adsorption experiments on the fresh aggregate samples at three different ionic strengths (0.56 M, 0.1 M and 0.01 M). We minimized sample processing (i.e., drying and powdering) to a simple washing step, in which the aggregate pellets remained hydrated to avoid any mineral transformation thus altering their true surface reactivity in seawater. Experimental results were then fitted with non-electrostatic model to predict both surface charges and metal-adsorption behavior of ferrihydrite aggregates. Different from previous surface-complexation modelling studies, here we used a novel and more powerful modelling program called Phreefit. It utilizes the global optimization algorithms instead of more commonly used Newton-Raphson method in FITEQL program, which is often too limited for precisely modelling complex systems such as the two samples in this study. Furthermore, we also measured the surface charges of both samples over the pH range from 3 to 9 on a Malvern Zetasizer and characterized the surface functional groups through Fourier-Transform Infrared Spectroscopy to help with our interpretation of the experimental data.Preliminary results show that cyanobacteria-ferrihydrite aggregates formed primarily due to ionic bridging. Cyanobacterial cells likely facilitated the precipitation of dissolved silica. Findings from titration and Cd adsorption experiments indicate that the surface reactivity and capacity of both silica-rich ferrihydrite cyanobacteria-ferrihydrite aggregates to adsorb trace elements differ from their individual components, likely due to site blockage. This distinction is particularly prominent when considering the expected Archean seawater pH from 6 to 8. This disparity implies that the biogenic ferrihydrite aggregates do not exhibit an additive surface reactivity, which is in agreement with similar previous studies. Our combined results are crucial to accurately predict the adsorption of trace elements onto the aggregate surface and, ultimately, comprehend the archive of trace elements in sedimentary rocks used to reconstruct Precambrian ocean chemistry.
- 17 October 2023
- Published by Pensoft Publishers in ARPHA Conference Abstracts
- Vol. 6, e108666
Open AccessUsing a novel approach to characterize the surface reactivities of silica-rich ferrihydrite and biogenic cyanobacteria-ferrihydrite aggregates and the implications for Archean ocean geochemistry
Precambrian banded iron formations (BIF) are iron- and silica-rich chemical sedimentary rocks that are commonly used as paleo-redox proxies for Archean and Paleoproterozoic seawater geochemistry. At the onset of the Great Oxidation Event (herein GOE) around 2.4 Ga, cyanobacteria flourished with increasing nutrient fluxes due to oxidative weathering on land. In turn, this led to increased primary productivity that facilitated the permanent shift from a reducing Earth atmosphere to an oxidizing one. Interestingly, the duration of GOE also overlapped with one of the most prolific periods of BIF deposition.It is widely accepted that cyanobacteria were likely responsible for BIF formation during the GOE. Oxidation of dissolved Fe(II) by oxygen produced from cyanobacteria forms a metastable and amorphous mineral phase ferrihydrite, Fe(OH)3. As an essential component in both ancient BIF deposits and various modern ecosystems, the surface reactivity of ferrihydrite has been extensively studied under different conditions (i.e., pH and ionic strengths). Not only are the highly reactive surfaces of ferrihydrite particles important shuttles for trace element transport from the water column to the sediment pile, but previous studies have also demonstrated that cyanobacterial cells and ferrihydrite tend to aggregate at seawater pH. This means that ferrihydrite was also a vector for the transport of organic carbon to the seafloor. However, a complicating issue is how co-ions affect the surface reactivity of ferrihydrite, specifically dissolved silica which was abundant in ancient seawater. Although previous studies have demonstrated that silica can passivate the surface reactivity of ferrihydrite, what remains unclear is how silica impacts ferrihydrite-biomass aggregation. To fill this knowledge gap, we formed both silica-spiked ferrihydrite and cyanobacteria-ferrihydrite aggregates in situ and subsequently conducted empirical potentiometric acid-base titrations and Cd adsorption experiments on the fresh aggregate samples at three different ionic strengths (0.56 M, 0.1 M and 0.01 M). We minimized sample processing (i.e., drying and powdering) to a simple washing step, in which the aggregate pellets remained hydrated to avoid any mineral transformation thus altering their true surface reactivity in seawater. Experimental results were then fitted with non-electrostatic model to predict both surface charges and metal-adsorption behavior of ferrihydrite aggregates. Different from previous surface-complexation modelling studies, here we used a novel and more powerful modelling program called Phreefit. It utilizes the global optimization algorithms instead of more commonly used Newton-Raphson method in FITEQL program, which is often too limited for precisely modelling complex systems such as the two samples in this study. Furthermore, we also measured the surface charges of both samples over the pH range from 3 to 9 on a Malvern Zetasizer and characterized the surface functional groups through Fourier-Transform Infrared Spectroscopy to help with our interpretation of the experimental data.Preliminary results show that cyanobacteria-ferrihydrite aggregates formed primarily due to ionic bridging. Cyanobacterial cells likely facilitated the precipitation of dissolved silica. Findings from titration and Cd adsorption experiments indicate that the surface reactivity and capacity of both silica-rich ferrihydrite cyanobacteria-ferrihydrite aggregates to adsorb trace elements differ from their individual components, likely due to site blockage. This distinction is particularly prominent when considering the expected Archean seawater pH from 6 to 8. This disparity implies that the biogenic ferrihydrite aggregates do not exhibit an additive surface reactivity, which is in agreement with similar previous studies. Our combined results are crucial to accurately predict the adsorption of trace elements onto the aggregate surface and, ultimately, comprehend the archive of trace elements in sedimentary rocks used to reconstruct Precambrian ocean chemistry.
- Open Access
- 13 October 2023
- Published by Pensoft Publishers in ARPHA Conference Abstracts
- Vol. 6, e108135
Surface reactivity of the iron and manganese-oxidizing bacterium Leptothrix cholodnii SP-6
Surfaces of prokaryotic cells play a significant role in the adsorption of metals from aqueous solution and the formation of authigenic minerals (Konhauser 2006). Although most studies focus on the cell wall, it is known that many bacteria synthesise an extracellular layer of polysaccharides and proteins, including what are known as sheaths. It has been shown that the cyanobacterium Calothrix sp. produces as sheath which is neutrally charged at circumneutral pH values, and it was hypothesized that such a sheath might allow the cyanobacterium to survive in geothermal settings with high silicification rates (Phoenix et al. 2002). Specifically, the dominance of hydroxyl sites on Calothrix’s sheath surface facilitates hydrogen bonding with aqueous silica species, inducing the precipitation of amorphous silica on the sheath and thus protecting the underlying cell (Phoenix et al. 2002). Leptothrix cholodnii is a sheathed, iron and manganese-oxidizing bacterium that frequently inhabits minerals seeps, where Fe2+ and Mn2+ discharge into oxygenated surface waters (Spring et al. 1996). As a result, the sheath becomes encrusted with Fe(III) and Mn(IV) oxyhydroxides while the underlying cells are protected from mineralization (Emerson and Ghiorse 1992, Emerson et al. 2010). However, unlike Calothrix, Leptothrix’s sheath composition suggests that it might behave differently at circumneutral pH (Emerson and Ghiorse 1993). To investigate the surface reactivity of Leptothrix's sheath and cell wall we analyzed isolated sheaths, sheathless cells, and intact filaments of L. cholodnii SP-6. We studied these components using potentiometric titration, zeta-potential, Cd-adsorption, and Fourier transform infrared (FTIR) spectroscopy to elucidate changes in surface charge between the cell wall and sheath. For the isolated sheaths and intact filaments, titration data were fit using a two-site protonation model, resulting in the following pKa values: 6.05 (±0.29) and 9.34 (±0.11); and 7.77 (±0.17) and 10.50 (±0.20), respectively. For the sheathless cells, the best fit was obtained by using a three-site protonation model, resulting in the following pKa values: 5.40 (±0.59), 8.11 (±1.64) and 10.73 (±0.45). Total proton-active site concentrations were lower in isolated sheaths compared to intact filaments. Additionally, at circumneutral pH, net negative charge was lower for sheathless cells compared to intact filaments and isolated sheaths (Fig. 1). This information agrees with the Cd adsorption behaviour found for the three materials (Fig. 2). Thus, our preliminary results suggest that Leptothrix’s sheath is less reactive than the intact filaments at circumneutral pH, leading us to hypothesize that the outermost layer would sequester relatively lower amounts of cations, including Mn2+, from solution and potentially would protect the underlaying cell from deleterious mineralization. In addition to that, the less reactive sheath’s surface would also contribute to cell attachment, which is important for a species commonly found in streams (Phoenix et al. 2002, Emerson et al. 2010).
- 13 October 2023
- Published by Pensoft Publishers in ARPHA Conference Abstracts
- Vol. 6, e108135
Open AccessSurface reactivity of the iron and manganese-oxidizing bacterium Leptothrix cholodnii SP-6
Surfaces of prokaryotic cells play a significant role in the adsorption of metals from aqueous solution and the formation of authigenic minerals (Konhauser 2006). Although most studies focus on the cell wall, it is known that many bacteria synthesise an extracellular layer of polysaccharides and proteins, including what are known as sheaths. It has been shown that the cyanobacterium Calothrix sp. produces as sheath which is neutrally charged at circumneutral pH values, and it was hypothesized that such a sheath might allow the cyanobacterium to survive in geothermal settings with high silicification rates (Phoenix et al. 2002). Specifically, the dominance of hydroxyl sites on Calothrix’s sheath surface facilitates hydrogen bonding with aqueous silica species, inducing the precipitation of amorphous silica on the sheath and thus protecting the underlying cell (Phoenix et al. 2002). Leptothrix cholodnii is a sheathed, iron and manganese-oxidizing bacterium that frequently inhabits minerals seeps, where Fe2+ and Mn2+ discharge into oxygenated surface waters (Spring et al. 1996). As a result, the sheath becomes encrusted with Fe(III) and Mn(IV) oxyhydroxides while the underlying cells are protected from mineralization (Emerson and Ghiorse 1992, Emerson et al. 2010). However, unlike Calothrix, Leptothrix’s sheath composition suggests that it might behave differently at circumneutral pH (Emerson and Ghiorse 1993). To investigate the surface reactivity of Leptothrix's sheath and cell wall we analyzed isolated sheaths, sheathless cells, and intact filaments of L. cholodnii SP-6. We studied these components using potentiometric titration, zeta-potential, Cd-adsorption, and Fourier transform infrared (FTIR) spectroscopy to elucidate changes in surface charge between the cell wall and sheath. For the isolated sheaths and intact filaments, titration data were fit using a two-site protonation model, resulting in the following pKa values: 6.05 (±0.29) and 9.34 (±0.11); and 7.77 (±0.17) and 10.50 (±0.20), respectively. For the sheathless cells, the best fit was obtained by using a three-site protonation model, resulting in the following pKa values: 5.40 (±0.59), 8.11 (±1.64) and 10.73 (±0.45). Total proton-active site concentrations were lower in isolated sheaths compared to intact filaments. Additionally, at circumneutral pH, net negative charge was lower for sheathless cells compared to intact filaments and isolated sheaths (Fig. 1). This information agrees with the Cd adsorption behaviour found for the three materials (Fig. 2). Thus, our preliminary results suggest that Leptothrix’s sheath is less reactive than the intact filaments at circumneutral pH, leading us to hypothesize that the outermost layer would sequester relatively lower amounts of cations, including Mn2+, from solution and potentially would protect the underlaying cell from deleterious mineralization. In addition to that, the less reactive sheath’s surface would also contribute to cell attachment, which is important for a species commonly found in streams (Phoenix et al. 2002, Emerson et al. 2010).
- Open Access
Iron and Carbon Isotope Constraints on the Formation Pathway of Iron-Rich Carbonates within the Dagushan Iron Formation, North China Craton
Banded iron formations (BIFs) are enigmatic chemical sedimentary rocks that chronicle the geochemical and microbial cycling of iron and carbon in the Precambrian. However, the formation pathways of Fe carbonate, namely siderite, remain disputed. Here, we provide photomicrographs, Fe, C and O isotope of siderite, and organic C isotope of the whole rock from the ~2.52 Ga Dagushan BIF in the Anshan area, China, to discuss the origin of siderite. There are small magnetite grains that occur as inclusions within siderite, suggesting a diagenetic origin of the siderite. Moreover, the siderites have a wide range of iron isotope compositions (δ56FeSd) from −0.180‰ to +0.463‰, and a relatively negative C isotope composition (δ13CSd = −6.20‰ to −1.57‰). These results are compatible with the reduction of an Fe(III)-oxyhydroxide precursor to dissolved Fe(II) through microbial dissimilatory iron reduction (DIR) during early diagenesis. Partial reduction of the precursor and possible mixing with seawater Fe(II) could explain the presence of siderite with negative δ56Fe, while sustained reaction of residual Fe(III)-oxyhydroxide could have produced siderite with positive δ56Fe values. Bicarbonate derived from both DIR and seawater may have provided a C source for siderite formation. Our results suggest that microbial respiration played an important role in the formation of siderite in the late Archean Dagushan BIF.
Open AccessIron and Carbon Isotope Constraints on the Formation Pathway of Iron-Rich Carbonates within the Dagushan Iron Formation, North China Craton
Banded iron formations (BIFs) are enigmatic chemical sedimentary rocks that chronicle the geochemical and microbial cycling of iron and carbon in the Precambrian. However, the formation pathways of Fe carbonate, namely siderite, remain disputed. Here, we provide photomicrographs, Fe, C and O isotope of siderite, and organic C isotope of the whole rock from the ~2.52 Ga Dagushan BIF in the Anshan area, China, to discuss the origin of siderite. There are small magnetite grains that occur as inclusions within siderite, suggesting a diagenetic origin of the siderite. Moreover, the siderites have a wide range of iron isotope compositions (δ56FeSd) from −0.180‰ to +0.463‰, and a relatively negative C isotope composition (δ13CSd = −6.20‰ to −1.57‰). These results are compatible with the reduction of an Fe(III)-oxyhydroxide precursor to dissolved Fe(II) through microbial dissimilatory iron reduction (DIR) during early diagenesis. Partial reduction of the precursor and possible mixing with seawater Fe(II) could explain the presence of siderite with negative δ56Fe, while sustained reaction of residual Fe(III)-oxyhydroxide could have produced siderite with positive δ56Fe values. Bicarbonate derived from both DIR and seawater may have provided a C source for siderite formation. Our results suggest that microbial respiration played an important role in the formation of siderite in the late Archean Dagushan BIF.
- 12 May 2019
- Published by Scandinavian University Press in Lethaia
- Vol. 53 (1) , 47-61
Diopatra cuprea worm burrow parchment: a cautionary tale of infaunal surface reactivity
Many infaunal marine invertebrates produce mucus excretions that play an important role in metal binding, authigenic mineralization and burrow stabilization. To date, only a handful of studies have characterized the functional groups that control the surface reactivity of burrow linings and backfills. This makes it difficult to place estimates on the overall impact that bioturbation has on metal cycling in tidal flats, the inner shelf, estuaries and other shallow marine environments. Here, we examined the parchment linings of Diopatra cuprea burrows from the Ogeechee River estuary near Savannah, Georgia, USA. Acid–base titrations coupled with Fourier transform infrared spectroscopy demonstrate that the parchment is essentially composed of hydroxyl (R‐OH) groups, yielding total ligand densities of only 0.017 mmol/g. To place this value into context, it is orders of magnitude less than previously reported mucopolysaccharides for other marine worms, indicating that D. cuprea is essentially unreactive in the estuarine waters from which it was collected. This was corroborated by minimal Cd2+ adsorption to, and limited silicification of, pre‐rinsed parchment. The lack of silica adsorption was surprising given that the parchment was generally coated with an abundance of quartz grains when extracted from the sediment. This suggests that perhaps the physical, rather than chemical, characteristics of the parchment material were responsible for this association. Indeed, scanning electron microscope images show that the parchment is fibrous and envelopes quartz grains, implying that detritus may get trapped by the parchment mesh. It appears that unlike many other infaunal mucopolysaccharide‐rich linings that might be produced to provide reactive surfaces to which dissolved metal cations can adsorb for the organism's nutritional benefit, the parchment of D. cuprea may instead function to protect the animal from stresses such as predation or high‐energy disturbances.
- 12 May 2019
- Published by Scandinavian University Press in Lethaia
- Vol. 53 (1) , 47-61
Diopatra cuprea worm burrow parchment: a cautionary tale of infaunal surface reactivity
Many infaunal marine invertebrates produce mucus excretions that play an important role in metal binding, authigenic mineralization and burrow stabilization. To date, only a handful of studies have characterized the functional groups that control the surface reactivity of burrow linings and backfills. This makes it difficult to place estimates on the overall impact that bioturbation has on metal cycling in tidal flats, the inner shelf, estuaries and other shallow marine environments. Here, we examined the parchment linings of Diopatra cuprea burrows from the Ogeechee River estuary near Savannah, Georgia, USA. Acid–base titrations coupled with Fourier transform infrared spectroscopy demonstrate that the parchment is essentially composed of hydroxyl (R‐OH) groups, yielding total ligand densities of only 0.017 mmol/g. To place this value into context, it is orders of magnitude less than previously reported mucopolysaccharides for other marine worms, indicating that D. cuprea is essentially unreactive in the estuarine waters from which it was collected. This was corroborated by minimal Cd2+ adsorption to, and limited silicification of, pre‐rinsed parchment. The lack of silica adsorption was surprising given that the parchment was generally coated with an abundance of quartz grains when extracted from the sediment. This suggests that perhaps the physical, rather than chemical, characteristics of the parchment material were responsible for this association. Indeed, scanning electron microscope images show that the parchment is fibrous and envelopes quartz grains, implying that detritus may get trapped by the parchment mesh. It appears that unlike many other infaunal mucopolysaccharide‐rich linings that might be produced to provide reactive surfaces to which dissolved metal cations can adsorb for the organism's nutritional benefit, the parchment of D. cuprea may instead function to protect the animal from stresses such as predation or high‐energy disturbances.