Amira T. Khedewy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Amira T. Khedewy has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Ahmed Shaker
Mechanical Design and Production Engineering Department, Zagazig University, Zagazig, Egypt
4 shared publications - Marwa Ahmed Abd El-Baky
Industrial Engineering Department College of Engineering, King Khalid University Abha Saudi Arabia
2 shared publications Mohamed A. Hassan
Mechanical Design and Production Engineering Department Zagazig University Zagazig Egypt
2 shared publications- Dalia I. Saleh
Department of Chemistry, College of Science, Taif University, Taif City, Saudi Arabia
1 shared publication - Elizabeth Fox1 shared publication
- Hassan A. Rahma
Mechanical Design and Production Engineering Department, Zagazig University, Zagazig, Egypt
1 shared publication
Latest Publications
- Open Access
- 28 March 2026
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 405
Thermoresponsive alginate/PNIPAM/Fe3O4 microbots under magnetic surface locomotion for ocular therapies
- 28 March 2026
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 405
Open AccessThermoresponsive alginate/PNIPAM/Fe3O4 microbots under magnetic surface locomotion for ocular therapies
- 8 November 2024
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 35 (11)
On the Effect of Fibre Orientation and MWCNTs on the Strain‐Sensing Performance of TPU/PANI Electrospun Nanofibres
The increasing demand for flexible electromechanical devices with superior stretchability, durability, thermal stability and sensitivity has driven the development of new smart functional materials to replace conventional semiconductors. This study utilises combining electrospinning and in situ polymerisation to fabricate four types of thermoplastic polyurethane/polyaniline (TPU/PANI) nanofibrous membranes with varied fibre orientation and multiwalled carbon nanotubes (MWCNTs) incorporation. The combined effects of material composition and fibre alignment on strain‐sensing performance were systematically explored. All membranes exhibited stable, symmetric ohmic behaviour under strain, with current decreasing as strain increased. Remarkable repeatability and stability were observed in cyclic current–time tests. MWCNTs addition significantly enhanced conductivity, with aligned fibres further boosting performance. Gauge factor (GF) measurements revealed that aligned TPU/PANI mats had GFs of 7 (0%–18% strain) and 14.3 (18%–40%), while aligned TPU/MWCNTs/PANI mats had GFs of 5.2 (0%–13%) and 7.3 (13%–40%). Random TPU/PANI mats showed GFs of 13.9 (0%–11%) and 23.3 (11%–40%) and random TPU/MWCNTs/PANI mats had GFs of 13.9 (0%–19%) and 24.7 (19%–40%). Each configuration demonstrated suitability for specific applications, with random TPU/MWCNT/PANI mats exhibiting the best overall performance. This research provides critical insights into optimising flexible strain sensors by tuning both material composition and fibre orientation.
- 8 November 2024
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 35 (11)
On the Effect of Fibre Orientation and MWCNTs on the Strain‐Sensing Performance of TPU/PANI Electrospun Nanofibres
The increasing demand for flexible electromechanical devices with superior stretchability, durability, thermal stability and sensitivity has driven the development of new smart functional materials to replace conventional semiconductors. This study utilises combining electrospinning and in situ polymerisation to fabricate four types of thermoplastic polyurethane/polyaniline (TPU/PANI) nanofibrous membranes with varied fibre orientation and multiwalled carbon nanotubes (MWCNTs) incorporation. The combined effects of material composition and fibre alignment on strain‐sensing performance were systematically explored. All membranes exhibited stable, symmetric ohmic behaviour under strain, with current decreasing as strain increased. Remarkable repeatability and stability were observed in cyclic current–time tests. MWCNTs addition significantly enhanced conductivity, with aligned fibres further boosting performance. Gauge factor (GF) measurements revealed that aligned TPU/PANI mats had GFs of 7 (0%–18% strain) and 14.3 (18%–40%), while aligned TPU/MWCNTs/PANI mats had GFs of 5.2 (0%–13%) and 7.3 (13%–40%). Random TPU/PANI mats showed GFs of 13.9 (0%–11%) and 23.3 (11%–40%) and random TPU/MWCNTs/PANI mats had GFs of 13.9 (0%–19%) and 24.7 (19%–40%). Each configuration demonstrated suitability for specific applications, with random TPU/MWCNT/PANI mats exhibiting the best overall performance. This research provides critical insights into optimising flexible strain sensors by tuning both material composition and fibre orientation.
- 7 May 2024
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 35 (5)
Fabrication of in situ polymerized polyaniline‐based functional nanofibrous structures for flexible electromechanical devices
Recently, flexible electromechanical devices (EMDs) emerged as alternatives to rigid electronics, promoting polymeric materials over traditional semiconductors. This study develops EMDs using conductive nanofibrous membranes of thermoplastic polyurethane (TPU), polyaniline (PANI), and multi‐walled carbon nanotubes (MWCNTs) in various structures. The fabrication technique included the combination of electrospinning and in situ polymerization to create random and aligned conductive membranes. Morphological, mechanical, thermomechanical, and electrical characterizations were conducted to assess their potential in EMDs applications. Mechanical testing revealed that, in comparison to aligned pure TPU mats, aligned TPU/PANI and TPU/MWCNTs/PANI membranes exhibited maximum strains of 26% and 19%, respectively. Meanwhile, randomly oriented mats, TPU/PANI and TPU/MWCNTs/PANI demonstrated maximum strains of 18% and 27%, respectively. Moreover, incorporating PANI and/or MWCNTs increased the Young's modulus. Thermogravimetric analysis showed thermal stability up to 250°C for all mats, with TPU/PANI mats demonstrating superior stability. Dynamic mechanical analysis revealed that PANI incorporation increased the storage modulus from 119 and 180 MPa to 2012 and 1367 MPa for aligned and random mats, respectively, compared with pure TPU mats. The combination of MWCNTs and PANI yielded moduli of 1501 and 1096 MPa, respectively. All conductive mats exhibited symmetric ohmic behavior, with conductivities varying based on orientation and composition. Specifically, TPU/PANI and TPU/MWCNTs/PANI mats exhibited conductivities of 0.83 and 1.78 S/cm for aligned mats, and 0.35 and 0.67 S/cm for random mats, respectively. Pure TPU, on the other hand, displayed a conductivity of 1.8 × 10−10 S/cm, indicating a significantly lower conductivity compared with the other mats.
- 7 May 2024
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 35 (5)
Fabrication of in situ polymerized polyaniline‐based functional nanofibrous structures for flexible electromechanical devices
Recently, flexible electromechanical devices (EMDs) emerged as alternatives to rigid electronics, promoting polymeric materials over traditional semiconductors. This study develops EMDs using conductive nanofibrous membranes of thermoplastic polyurethane (TPU), polyaniline (PANI), and multi‐walled carbon nanotubes (MWCNTs) in various structures. The fabrication technique included the combination of electrospinning and in situ polymerization to create random and aligned conductive membranes. Morphological, mechanical, thermomechanical, and electrical characterizations were conducted to assess their potential in EMDs applications. Mechanical testing revealed that, in comparison to aligned pure TPU mats, aligned TPU/PANI and TPU/MWCNTs/PANI membranes exhibited maximum strains of 26% and 19%, respectively. Meanwhile, randomly oriented mats, TPU/PANI and TPU/MWCNTs/PANI demonstrated maximum strains of 18% and 27%, respectively. Moreover, incorporating PANI and/or MWCNTs increased the Young's modulus. Thermogravimetric analysis showed thermal stability up to 250°C for all mats, with TPU/PANI mats demonstrating superior stability. Dynamic mechanical analysis revealed that PANI incorporation increased the storage modulus from 119 and 180 MPa to 2012 and 1367 MPa for aligned and random mats, respectively, compared with pure TPU mats. The combination of MWCNTs and PANI yielded moduli of 1501 and 1096 MPa, respectively. All conductive mats exhibited symmetric ohmic behavior, with conductivities varying based on orientation and composition. Specifically, TPU/PANI and TPU/MWCNTs/PANI mats exhibited conductivities of 0.83 and 1.78 S/cm for aligned mats, and 0.35 and 0.67 S/cm for random mats, respectively. Pure TPU, on the other hand, displayed a conductivity of 1.8 × 10−10 S/cm, indicating a significantly lower conductivity compared with the other mats.
- Open Access
- 13 October 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-17
Thermo-mechanical characterization of electrospun polyurethane/carbon-nanotubes nanofibers: a comparative study
Creating ultrathin, mountable fibers from a wide range of polymeric functional materials has made electrospinning an adequate approach to producing highly flexible and elastic materials. In this paper, electrospinning was utilized to produce thermoplastic polyurethane (TPU) nanofibrous membranes for the purpose of studying their thermal and mechanical properties. Towards a study of the effects of fiber orientation and multi-walled carbon nanotubes (MWCNTs) as a filler on both mechanical and thermal characteristics of electrospun TPU mats, an experimental comparison was held between unidirectional and randomly aligned TPU and TPU/MWCNTs nanofibrous structures. The incorporation of MWCNTs into randomly oriented TPU nanofibers resulted in a significant increase in Young's modulus (E), from 3.9 to 7.5 MPa. On the other hand, for unidirectionally spun fibers, Young's modulus increased from 17.1 to 18.4 MPa upon the addition of MWCNTs. However, dynamic mechanical analysis revealed a different behavior. The randomly oriented specimens exhibited a storage modulus with a significant increase from 180 to 614 MPa for TPU and TPU/MWCNTs mats, respectively, and a slight increase from 119 to 143 MPa for unidirectional TPU and TPU/MWCNTs mats, respectively. Meanwhile, the loss modulus increased with the addition of MWCNTs from 15.7 to 58.9 MPa and from 6.4 to 12 MPa for the random and aligned fibers, respectively. The glass transition values for all the mats fell in the temperature range of – 60 to − 20 °C. The thermal degradation of the membranes was not significantly affected by the addition of MWCNTs, indicating that the mixing of the two constituents did not change the TPU’s polymer structure and that the TPU/MWCNTs nanocomposite exhibited stable thermal degradation properties.
- 13 October 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-17
Open AccessThermo-mechanical characterization of electrospun polyurethane/carbon-nanotubes nanofibers: a comparative study
Creating ultrathin, mountable fibers from a wide range of polymeric functional materials has made electrospinning an adequate approach to producing highly flexible and elastic materials. In this paper, electrospinning was utilized to produce thermoplastic polyurethane (TPU) nanofibrous membranes for the purpose of studying their thermal and mechanical properties. Towards a study of the effects of fiber orientation and multi-walled carbon nanotubes (MWCNTs) as a filler on both mechanical and thermal characteristics of electrospun TPU mats, an experimental comparison was held between unidirectional and randomly aligned TPU and TPU/MWCNTs nanofibrous structures. The incorporation of MWCNTs into randomly oriented TPU nanofibers resulted in a significant increase in Young's modulus (E), from 3.9 to 7.5 MPa. On the other hand, for unidirectionally spun fibers, Young's modulus increased from 17.1 to 18.4 MPa upon the addition of MWCNTs. However, dynamic mechanical analysis revealed a different behavior. The randomly oriented specimens exhibited a storage modulus with a significant increase from 180 to 614 MPa for TPU and TPU/MWCNTs mats, respectively, and a slight increase from 119 to 143 MPa for unidirectional TPU and TPU/MWCNTs mats, respectively. Meanwhile, the loss modulus increased with the addition of MWCNTs from 15.7 to 58.9 MPa and from 6.4 to 12 MPa for the random and aligned fibers, respectively. The glass transition values for all the mats fell in the temperature range of – 60 to − 20 °C. The thermal degradation of the membranes was not significantly affected by the addition of MWCNTs, indicating that the mixing of the two constituents did not change the TPU’s polymer structure and that the TPU/MWCNTs nanocomposite exhibited stable thermal degradation properties.