SSSubrata Kumar Saha

Subrata Kumar Saha

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Subrata Kumar Saha has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Application of ANOVA to choose the suitable traveller clearer distance on the quality of medium cotton carded ring spun yarn

    by Amit Chakrabortty, Naimur Rahman Ishtiaque, Subrata Kumar Saha, Jamal Hossen, Shahriar Raian, Nusrat Jahan Jassi, Sanjida Islam Mumu, Khandakar Fathin Nihal

    The traveller clearer is a small component that is located near the ring to prevent fibre gathering. The distance between the ring and the traveller clearer is critical for removing fibres fly during yarn production, which influences overall yarn quality. Limited study has focused on the effect of traveller clearer distance on coarser count ring-spun yarn, but its impact on medium to finer counts remains primarily unexplored. This study examined the effect of traveller clearer distance on 26 Ne ring-spun yarn quality using one-way ANOVA and Tukey’s Honest Significant Difference (HSD) test for a detailed statistical analysis. Yarn samples were produced using six traveller clearer settings such as 1.6 mm, 1.8 mm, 2 mm, 2.2 mm, 2.4 mm, and a without clearer and evaluated for CVm%, thick, thin places, neps, IPI, hairiness, strength, and end breakage rate. Findings revealed that sample made from a traveller clearer distance of 1.8 mm and 2 mm had better yarn quality than the others. One-way ANOVA (p < 0.05) revealed significant changes in yarn quality over traveller clearer distances. Tukey’s Honest Significant Difference (HSD) test found no significant difference between sample B (1.8 mm) and sample C (2 mm) settings, indicating both are suitable for producing quality yarn. However, Sample B (1.8 mm) may be preferred based on Uster standards when higher quality is desired. The findings have important implications for textile manufacturing by identifying appropriate traveller cleaner settings that help enhance yarn quality and ensure better control over the production process.

  • Open Access

    Application of ANOVA and AHP in Assessing the Quality of Roving Cotton-Polyester Siro Yarn

    by Amit Chakrabortty, Shahriar Raian, Subrata Kumar Saha, Jamal Hossen

    Siro spinning, an evolution of ring spinning, optimizes parameters, such as roving strand distance and twist multiplier, thereby enhancing yarn quality according to numerous studies. Experts have differing opinions on the benefits of roving distances for yarn quality. However, the effect of roving distance on the roving blending technique in the ring frame has not been fully investigated. An integrated analysis of variance (ANOVA) and the analytical hierarchy process (AHP) based methodology are presented in this work to close the research gap between yarn quality attributes and roving strand distance in the context of roving blending. For this purpose, five yarn samples of 19.68 tex were developed using different roving distances, specifically 2 mm, 4 mm, 6 mm, 8 mm and 10 mm, within the drafting zone using a 50/50 cotton-polyester roving blending technique in a ring frame. Subsequently, the quality metrics of the yarn were studied, including variation concerning yarn mass (CVvm%), the imperfection index (IPIY) value, hairiness (HI), the count strength product (CSPLS) value, elongation at break (ebr%) and the total quality index (TQIYQ). The results revealed that yarn sample B, made using a distance of 4 mm, resulted in good yarn quality. An ANOVA demonstrated that roving distance had no significant effect on HI, ebr% or TQIYQ. However, AHP assisted in determining the ideal roving strand distance among various options. The study's findings provide practical suggestions for determining the ideal roving strand distance for better blended yarn quality.

  • Open Access

    An approach to choose the suitable blend ratio of virgin cotton, pre-consumer, and spinning process wastes for rotor-spun yarn using an analytic hierarchy process

    by Amit Chakrabortty, Siyam Quddus Khan, Jamal Hossen, Subrata Kumar Saha, Muaj Mohammad Shakib

    With rising environmental awareness, and financial rewards, recycled fibres are increasingly being employed in non-woven fabrics, composites, and regenerated fibres. This study investigated the use of recycled fibers with virgin cotton in rotor spinning to produce sustainable yarns. Although pre-consumer and spinning process waste have been studied, limited research has been undertaken on the use of statistical methodologies such as one-way ANOVA and Analytic Hierarchy Process (AHP) to identify the optimum blending ratios based on yarn performance. The study presented a novel technique for optimizing these ratios that included ANOVA, AHP, and cost analysis. In this study, five samples of 84 tex rotor yarn were produced by blending virgin cotton (30%) and flat strips (20%) with variable quantities of comber noil, pre-consumer waste, and hard waste in three different combinations for each. Yarn quality characteristics were assessed, including mass variation, imperfection index, hairiness, tenacity, elongation, and Total Quality Index. Samples D (30:15:20: 15:20) and E (30:10:30: 10:20), made of Virgin Cotton, Comber Noil, Hard Waste, Pre-Consumer Waste, and Flat Strips, had better yarn quality than the other blends. ANOVA ( p < 0.05) revealed substantial changes in yarn quality among blend ratios, whereas AHP ranked samples by important characteristics. The results showed that Sample E exhibited good yarn qualities, which were consistent with both statistical validation and expert opinion. Furthermore, the study emphasized the economic feasibility of appropriate blending, emphasizing attainable raw material savings, minimizing waste, and encouraging sustainability in spinning mills.


  • Open Access

    Application of Artificial Neural Networks in yarn manufacturing industry: A critical review

    by Jamal Hossen, Reajul Islam, Subrata Kumar Saha, Shahriar Raian, Amit Chakrabortty, Emdadul Hoque, Chowdhury Jony Moin

    Researchers are working hard to handle the intricate interplay and interconnected relationships between fiber properties, process parameters, and consumer requirements in yarn manufacturing. These relationships make a complex network and researchers tried to develop prediction models through artificial neural network (ANN). This paper provides a systematic and comprehensive up to date (2024) overview on applications of ANN in the textile yarn manufacturing (fiber to yarn) sector. In addition, diverse methodologies, approaches, and specific applications of ANN in fiber to yarn are criticized in this study. The limitations, challenges, and future scopes of this subject have been explored by synthesizing the selected relevant publications in the field of textile yarn manufacture and ANNs. The study contributes to the theoretical and practical implications through this review and concludes with a valuable future opportunity. Notwithstanding the fact that the research shows a clear improvement in the implementation of ANN in the yarn manufacturing sector, substantial work remains to be done in these areas.


  • Open Access

    Influence of Blending Method and Blending Ratio on Ring-spun Yarn Quality – a MANOVA Approach

    by Jamal Hossen, Subrata Kumar Saha

    Cotton-polyester is a common and popular fibre blend in the textile industry nowadays. Its main advantage is that it improves the functional properties of clothing and textile products. In this study, fibre-blended, sliver-blended and roving-blended yarns with a fineness of 23 tex were manufactured using a ring spinning system, with blend ratios of cotton and polyester fibres of 50:50, 60:40 and 70:30. The quality parameters of the produced yarn, such as mass variations, imperfections, hairiness and bundle yarn strength, were studied. The end breakage rate of the ring frame machine was also studied during the manufacturing of the yarns. The results were analysed using multivariate analysis of variance (MANOVA) to determine the significance of the impact of the blending method and blending ratio on yarn quality and the end breakage rate of the ring frame machine. The profile plots were analysed from statistical and technical points of view. Among the three blended yarns, fibre-blended yarn demonstrated the best results in terms of mass variations and imperfections due to better blending homogeneity, while roving-blended yarn demonstrated better results in terms of hairiness. Among the blended yarn, fibre-blended yarn demonstrated the highest bundle yarn strength value, while the corresponding end breakage rate of the ring frame machine recorded the lowest value. The yarn quality was improved in terms of mass variations, imperfections, hairiness and bundle yarn strength by increasing the polyester fibre percentage in the blend ratio.