Naresh Chandra Maurya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Naresh Chandra Maurya has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Kumaran Nair Valsala Devi Adarsh
Indian Institute of Science Education and Research Bhopal
7 shared publications - Shivani Choudhary
Indian Institute of Technology Roorkee
3 shared publications - Soumitra Satapathi
Indian Institute of Technology Roorkee
3 shared publications - Naveen Kumar Tailor
Indian Institute of Technology Jodhpur
2 shared publications - Saurabh Kumar Saini
Indian Institute of Technology Roorkee
2 shared publications Afreen
1 shared publication
Latest Publications
- 17 August 2026
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (34) , 19081-19093
Hydration as a Structural Switch: Controlling Magnetic Coupling and CO2 Photoreduction in Transition-Metal Halide Perovskites
Transition-metal halides are of particular interest because their partially filled d-orbitals, containing unpaired electrons, give rise to distinctive magnetic and electronic properties. Notably, hydration can act as a structural switch, inducing substantial modifications in their magnetic interactions and electronic behavior. Thus, elucidating the role of hydration and the corresponding transition-metal dynamics is essential for unraveling the rich photophysical characteristics and functional potential of these materials. In this study, we synthesized CsMnCl3·2H2O crystals and investigated the impact of structural water on their low-temperature optical, magnetic, and catalytic properties. We observed that solvent-induced crystal-to-crystal phase transformations, driven by the loss and regaining of water of crystallization, alter the coordination number of Mn2+ ions. Optical studies revealed distinct emission behaviors: CsMnCl3·2H2O exhibited superlinear emission behavior in the excitation power range of 0.1 mW to 1 mW, while CsMnCl3 displayed sublinear behavior. Magnetic characterization indicated a higher Néel temperature for CsMnCl3 compared to CsMnCl3·2H2O, reflecting stronger Mn2+–Mn2+ interactions and enhanced antiferromagnetic coupling in the anhydrous phase. Catalytic measurements further established that CsMnCl3 exhibits superior performance in CO2 photoreduction, particularly in selective methane (CH4) formation, due to improved charge-carrier separation in synergy with stronger magnetic coupling. Collectively, these findings highlight the pivotal role of hydration as a structural switch in modulating the optical, magnetic, and catalytic responses of lead-free transition-metal halide perovskites, offering design principles for next-generation optoelectronic and photocatalytic materials.
- 17 August 2026
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (34) , 19081-19093
Hydration as a Structural Switch: Controlling Magnetic Coupling and CO2 Photoreduction in Transition-Metal Halide Perovskites
Transition-metal halides are of particular interest because their partially filled d-orbitals, containing unpaired electrons, give rise to distinctive magnetic and electronic properties. Notably, hydration can act as a structural switch, inducing substantial modifications in their magnetic interactions and electronic behavior. Thus, elucidating the role of hydration and the corresponding transition-metal dynamics is essential for unraveling the rich photophysical characteristics and functional potential of these materials. In this study, we synthesized CsMnCl3·2H2O crystals and investigated the impact of structural water on their low-temperature optical, magnetic, and catalytic properties. We observed that solvent-induced crystal-to-crystal phase transformations, driven by the loss and regaining of water of crystallization, alter the coordination number of Mn2+ ions. Optical studies revealed distinct emission behaviors: CsMnCl3·2H2O exhibited superlinear emission behavior in the excitation power range of 0.1 mW to 1 mW, while CsMnCl3 displayed sublinear behavior. Magnetic characterization indicated a higher Néel temperature for CsMnCl3 compared to CsMnCl3·2H2O, reflecting stronger Mn2+–Mn2+ interactions and enhanced antiferromagnetic coupling in the anhydrous phase. Catalytic measurements further established that CsMnCl3 exhibits superior performance in CO2 photoreduction, particularly in selective methane (CH4) formation, due to improved charge-carrier separation in synergy with stronger magnetic coupling. Collectively, these findings highlight the pivotal role of hydration as a structural switch in modulating the optical, magnetic, and catalytic responses of lead-free transition-metal halide perovskites, offering design principles for next-generation optoelectronic and photocatalytic materials.
- 28 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 8 (15) , 6358-6373
Illumination-Dependent Photocarrier Dynamics in Perovskite Solar Cells Decoded through Electro-Optic Dual-Probe Analysis
The performance of solar cells is highly sensitive to variations in light intensity, which naturally fluctuate due to geographic location, weather conditions, and the diurnal solar cycle. Understanding the behavior of photovoltaic devices under such varying illumination is crucial for evaluating their real-world applicability. Although metal halide perovskite solar cells have demonstrated remarkable power conversion efficiencies, their performance under variable light conditions remains underexplored. This study presents a comprehensive investigation into the light-intensity-dependent behavior of perovskite solar cells using a synergistic dual-probe approach that integrates electrical characterization with steady-state and ultrafast optical spectroscopy. Devices fabricated in a p−i−n architecture are evaluated across a wide illumination range (9.5 to 100 mW/cm2), revealing excellent efficiency retention even under low-light conditions. While the short-circuit current density (JSC) shows a sublinear dependence on light intensity (JSC ∝ I0.86), the open-circuit voltage (VOC) displays a weak dependence (VOC ∝ I0.03). Interestingly, the fill factor increases at lower light intensities. Impedance spectroscopy reveals increased resistance and decreased capacitance at reduced intensities, indicating lower carrier densities and suppressed interfacial charge accumulation. Intensity dependent photoluminescence and ideality factor analysis (∼1.15) suggest dominant radiative recombination with minimal nonradiative losses. Power-dependent transient absorption spectroscopy further supports enhanced recombination losses at high excitation powers, which accounts for the sublinear photocurrent behavior. This work provides a comprehensive framework for understanding the photophysical behavior of perovskite solar cells under weak and diffuse illumination conditions encountered in realistic operating environments, including cloudy weather, dawn/dusk illumination, and low-intensity scattered sunlight. These findings offer important insights into the fundamental light-harvesting and charge-transport mechanisms governing perovskite solar cells under low-flux illumination, thereby contributing to the development of efficient photovoltaic systems optimized for weak-light and diffuse-light applications.
- 28 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 8 (15) , 6358-6373
Illumination-Dependent Photocarrier Dynamics in Perovskite Solar Cells Decoded through Electro-Optic Dual-Probe Analysis
The performance of solar cells is highly sensitive to variations in light intensity, which naturally fluctuate due to geographic location, weather conditions, and the diurnal solar cycle. Understanding the behavior of photovoltaic devices under such varying illumination is crucial for evaluating their real-world applicability. Although metal halide perovskite solar cells have demonstrated remarkable power conversion efficiencies, their performance under variable light conditions remains underexplored. This study presents a comprehensive investigation into the light-intensity-dependent behavior of perovskite solar cells using a synergistic dual-probe approach that integrates electrical characterization with steady-state and ultrafast optical spectroscopy. Devices fabricated in a p−i−n architecture are evaluated across a wide illumination range (9.5 to 100 mW/cm2), revealing excellent efficiency retention even under low-light conditions. While the short-circuit current density (JSC) shows a sublinear dependence on light intensity (JSC ∝ I0.86), the open-circuit voltage (VOC) displays a weak dependence (VOC ∝ I0.03). Interestingly, the fill factor increases at lower light intensities. Impedance spectroscopy reveals increased resistance and decreased capacitance at reduced intensities, indicating lower carrier densities and suppressed interfacial charge accumulation. Intensity dependent photoluminescence and ideality factor analysis (∼1.15) suggest dominant radiative recombination with minimal nonradiative losses. Power-dependent transient absorption spectroscopy further supports enhanced recombination losses at high excitation powers, which accounts for the sublinear photocurrent behavior. This work provides a comprehensive framework for understanding the photophysical behavior of perovskite solar cells under weak and diffuse illumination conditions encountered in realistic operating environments, including cloudy weather, dawn/dusk illumination, and low-intensity scattered sunlight. These findings offer important insights into the fundamental light-harvesting and charge-transport mechanisms governing perovskite solar cells under low-flux illumination, thereby contributing to the development of efficient photovoltaic systems optimized for weak-light and diffuse-light applications.
- 6 July 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (28) , 16539-16548
Lanthanide-Dependent Switching between Magnetic and Optical Thermometry in Structurally Analogous Complexes
Reliable temperature sensing is crucial for understanding thermal relaxation processes and operational limits in single-molecule magnets (SMMs). However, the development of luminescence-based molecular thermometers is often limited by inefficient ligand-to-metal energy transfer, restricting their applicability in many lanthanide SMMs. Here, we investigate two structurally analogous dinuclear lanthanide complexes, [Ln2(TTA)6(BPTZ)]·2S (Ln = Dy3+ for 1, Eu3+ for 2; TTA = 2-thenoyltrifluoroacetone, BPTZ = 3,6-di(2-pyridyl)-1,2,4,5-tetrazine; S = CHCl3 or CH2Cl2), whose thermometric behavior is governed solely by the choice of metal ion. The Dy3+ complex exhibits SMM behavior and functions as a magnetic thermometer in 15-100 K using inverse magnetic susceptibility as the sensing parameter, compensating for the lack of luminescence thermometry. It exhibits a maximum relative thermal sensitivity (Smax) of 6.65% K-1 at 15 K and maintains Sr > 1% K-1 throughout 15-100 K. In contrast, Eu3+ complex functions as a luminescent thermometer with an Smax of 2.15% K-1 at 350 K. The divergent responses arise from differences in energy-level alignment between ligand donor and lanthanide acceptor states. This work introduces a metal-dependent approach for modulating thermometric function between optical and magnetic within a constant ligand framework, expanding the utility of lanthanide complexes beyond luminescence-based sensing.
- 6 July 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (28) , 16539-16548
Lanthanide-Dependent Switching between Magnetic and Optical Thermometry in Structurally Analogous Complexes
Reliable temperature sensing is crucial for understanding thermal relaxation processes and operational limits in single-molecule magnets (SMMs). However, the development of luminescence-based molecular thermometers is often limited by inefficient ligand-to-metal energy transfer, restricting their applicability in many lanthanide SMMs. Here, we investigate two structurally analogous dinuclear lanthanide complexes, [Ln2(TTA)6(BPTZ)]·2S (Ln = Dy3+ for 1, Eu3+ for 2; TTA = 2-thenoyltrifluoroacetone, BPTZ = 3,6-di(2-pyridyl)-1,2,4,5-tetrazine; S = CHCl3 or CH2Cl2), whose thermometric behavior is governed solely by the choice of metal ion. The Dy3+ complex exhibits SMM behavior and functions as a magnetic thermometer in 15-100 K using inverse magnetic susceptibility as the sensing parameter, compensating for the lack of luminescence thermometry. It exhibits a maximum relative thermal sensitivity (Smax) of 6.65% K-1 at 15 K and maintains Sr > 1% K-1 throughout 15-100 K. In contrast, Eu3+ complex functions as a luminescent thermometer with an Smax of 2.15% K-1 at 350 K. The divergent responses arise from differences in energy-level alignment between ligand donor and lanthanide acceptor states. This work introduces a metal-dependent approach for modulating thermometric function between optical and magnetic within a constant ligand framework, expanding the utility of lanthanide complexes beyond luminescence-based sensing.
- 7 April 2026
- Published by Springer Nature in Nature Synthesis
- Vol. 5 (8) , 1278-1289
Thiophene-based photocatalyst for exciplex-mediated singlet oxygen generation and H2O2 production
- 7 April 2026
- Published by Springer Nature in Nature Synthesis
- Vol. 5 (8) , 1278-1289
Thiophene-based photocatalyst for exciplex-mediated singlet oxygen generation and H2O2 production
- 20 November 2025
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 20 (1)
Interface Effects on Optical Nonlinearity in Au/MoS 2 Nanohybrids
Tuning nonlinear optical (NLO) phenomena are crucial for next‐generation light modulation technologies like optical limiting and switching as well as quantum photonics. To that end, metal–semiconductor nanohybrids have emerged as important systems. Herein, the NLO behavior of Au/MoS 2 hybrids is investigated using the Z‐scan technique in the nanosecond regime. A key observation is a pronounced reverse saturable absorption (RSA) response in strongly coupled Au/MoS 2 , markedly distinct from the behavior of weakly coupled Au/MoS 2 , as well as pristine MoS 2 nanosheets and Au nanoparticles (NPs), which give saturable absorption (SA). The RSA in strongly coupled Au/MoS 2 is attributed to strong interplay between the semiconductor electronic states and localized surface plasmon resonances of the metal NPs, enabling an excited‐state absorption (ESA) process following one‐photon excitation. A field‐assisted carrier trapping model is proposed to account for this unique noninstantaneous RSA, where charge separation across the hybrid interface enhances excited‐state population. Further, comparison with a weakly coupled hybrid structure underscores the critical role of interfacial interactions in switching between SA and RSA regimes. These findings demonstrate the importance of controlling the interfacial interactions at metal‐semiconductor hybrids in NLO applications where dynamic range, noninstantaneity, and broadband control are critical.
- 20 November 2025
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 20 (1)
Interface Effects on Optical Nonlinearity in Au/MoS 2 Nanohybrids
Tuning nonlinear optical (NLO) phenomena are crucial for next‐generation light modulation technologies like optical limiting and switching as well as quantum photonics. To that end, metal–semiconductor nanohybrids have emerged as important systems. Herein, the NLO behavior of Au/MoS 2 hybrids is investigated using the Z‐scan technique in the nanosecond regime. A key observation is a pronounced reverse saturable absorption (RSA) response in strongly coupled Au/MoS 2 , markedly distinct from the behavior of weakly coupled Au/MoS 2 , as well as pristine MoS 2 nanosheets and Au nanoparticles (NPs), which give saturable absorption (SA). The RSA in strongly coupled Au/MoS 2 is attributed to strong interplay between the semiconductor electronic states and localized surface plasmon resonances of the metal NPs, enabling an excited‐state absorption (ESA) process following one‐photon excitation. A field‐assisted carrier trapping model is proposed to account for this unique noninstantaneous RSA, where charge separation across the hybrid interface enhances excited‐state population. Further, comparison with a weakly coupled hybrid structure underscores the critical role of interfacial interactions in switching between SA and RSA regimes. These findings demonstrate the importance of controlling the interfacial interactions at metal‐semiconductor hybrids in NLO applications where dynamic range, noninstantaneity, and broadband control are critical.
- 27 August 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (35) , 9159-9168
Electro-Optical Analysis of Carrier Dynamics in Lead-Free Cs3Bi2I9 Perovskite
In this study, we examined carrier conduction in a Cs3Bi2I9 (CBI) perovskite through a dual-probe approach using both optical and electrical measurements. We observed that the open-circuit voltage and photocurrent with light intensity follow the VOC ∝ I0.06 and JSC ∝ I0.94 relationships, attributed to nonradiative recombination losses and trapping of carriers. Excitation power-dependent photoluminescence behavior indicates the influence of the self-trapped exciton (STE) and strong phonon perturbation at high excitation powers in the CBI lattice. Transient absorption measurements as a function of excitation power and energy provide insights about exciton trapping and polaron formation. At higher powers, polaron formation and lattice distortion increase, broadening the photoinduced absorption band at the low-energy side. Exciton generation was more efficient near the excitonic absorption peak, while a higher energy caused greater lattice distortion and electron-phonon coupling. This study advances the understanding of the optoelectronic behavior of CBI perovskites and provides insights into carrier dynamics in similar materials.
- 27 August 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 16 (35) , 9159-9168
Electro-Optical Analysis of Carrier Dynamics in Lead-Free Cs3Bi2I9 Perovskite
In this study, we examined carrier conduction in a Cs3Bi2I9 (CBI) perovskite through a dual-probe approach using both optical and electrical measurements. We observed that the open-circuit voltage and photocurrent with light intensity follow the VOC ∝ I0.06 and JSC ∝ I0.94 relationships, attributed to nonradiative recombination losses and trapping of carriers. Excitation power-dependent photoluminescence behavior indicates the influence of the self-trapped exciton (STE) and strong phonon perturbation at high excitation powers in the CBI lattice. Transient absorption measurements as a function of excitation power and energy provide insights about exciton trapping and polaron formation. At higher powers, polaron formation and lattice distortion increase, broadening the photoinduced absorption band at the low-energy side. Exciton generation was more efficient near the excitonic absorption peak, while a higher energy caused greater lattice distortion and electron-phonon coupling. This study advances the understanding of the optoelectronic behavior of CBI perovskites and provides insights into carrier dynamics in similar materials.
- 1 January 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (1)
Improvement in hot carrier dynamics of all-inorganic halide perovskite CsPbI3 on doping Cu
Hot carrier extraction is crucial for efficient solar energy harvesting, and lead halide perovskite nanocrystals (NCs) are potential candidates for photovoltaic and light-emitting applications. Therefore, swift extraction of hot carriers is an immediate requirement to improve the energy conversion efficiency, which need longer thermalization time. To address this issue, we synthesized nominally Cu-doped CsPbI3 NCs with enhanced structural and optical characteristics compared to undoped CsPbI3 NCs. We investigated the hot carrier dynamics in both the NCs at different fluences using ultrafast transient absorption spectroscopy. Interestingly, we observed very fast thermalization at higher fluences that indicated breaking of the phonon bottleneck. On the contrary, doped NCs preserved the effects and decayed over a longer period of time possibly due to increase in size and introduction of shallow trap states of Cu 3d and Cu 4s electrons in the conduction band, as computed using density functional theory. Notably, as the carrier–carrier interaction increased, we observed a dominating bandgap renormalization in the doped system compared to the undoped system. Overall, our studies improve the understanding of Cu doping in enhancing the hot carrier dynamics in perovskites and open possibilities for further investigation in the quantum phenomenon of these materials.
- 1 January 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (1)
Improvement in hot carrier dynamics of all-inorganic halide perovskite CsPbI3 on doping Cu
Hot carrier extraction is crucial for efficient solar energy harvesting, and lead halide perovskite nanocrystals (NCs) are potential candidates for photovoltaic and light-emitting applications. Therefore, swift extraction of hot carriers is an immediate requirement to improve the energy conversion efficiency, which need longer thermalization time. To address this issue, we synthesized nominally Cu-doped CsPbI3 NCs with enhanced structural and optical characteristics compared to undoped CsPbI3 NCs. We investigated the hot carrier dynamics in both the NCs at different fluences using ultrafast transient absorption spectroscopy. Interestingly, we observed very fast thermalization at higher fluences that indicated breaking of the phonon bottleneck. On the contrary, doped NCs preserved the effects and decayed over a longer period of time possibly due to increase in size and introduction of shallow trap states of Cu 3d and Cu 4s electrons in the conduction band, as computed using density functional theory. Notably, as the carrier–carrier interaction increased, we observed a dominating bandgap renormalization in the doped system compared to the undoped system. Overall, our studies improve the understanding of Cu doping in enhancing the hot carrier dynamics in perovskites and open possibilities for further investigation in the quantum phenomenon of these materials.
- 17 October 2023
- Published by American Physical Society (APS) in Physical Review B
- Vol. 108 (15) , 155417
Exciton many-body interactions and charge transfer in /graphene derivativesCharge separation and many-body interactions at the interface of the light-absorbing semiconductor and contact layer are of crucial importance to the photophysical properties and optoelectronic device performance. Here, we report the exciton many-body interactions and charge transfer dynamics at the interface of metal halide perovskite nanocrystals and graphene derivatives [graphene oxide (GO) and reduced GO (RGO)] using ultrafast transient absorption (TA) and time-resolved photoluminescence (PL) measurements. At the early timescales, the TA spectra of and show an asymmetric derivative feature originating from the exciton many-body interactions. The band gap renormalization and binding energies of exciton and biexciton of nanocrystals are significantly reduced in (RGO) due to the charge transfer and change in the dielectric environment, respectively. More specifically, the exciton (biexciton) binding energy of nanocrystals, originally () meV, decreases to () meV in and () meV in . Furthermore, we observe a reduction in the Auger recombination rate and exciton PL quenching in and , corroborating the charge transfer mechanism. Our systematic studies successfully describe photoexcited charge transfer from nanocrystals to GO (RGO) in () ps, which is one order of magnitude faster than the charge transfer for other acceptor materials such as metal oxide, fullerene, anthraquinone, 1-aminopyrene, and phenothiazine. Our results offer insights and guidance for perovskite-based high-performance optoelectronic devices.- 17 October 2023
- Published by American Physical Society (APS) in Physical Review B
- Vol. 108 (15) , 155417
Exciton many-body interactions and charge transfer in /graphene derivativesCharge separation and many-body interactions at the interface of the light-absorbing semiconductor and contact layer are of crucial importance to the photophysical properties and optoelectronic device performance. Here, we report the exciton many-body interactions and charge transfer dynamics at the interface of metal halide perovskite nanocrystals and graphene derivatives [graphene oxide (GO) and reduced GO (RGO)] using ultrafast transient absorption (TA) and time-resolved photoluminescence (PL) measurements. At the early timescales, the TA spectra of and show an asymmetric derivative feature originating from the exciton many-body interactions. The band gap renormalization and binding energies of exciton and biexciton of nanocrystals are significantly reduced in (RGO) due to the charge transfer and change in the dielectric environment, respectively. More specifically, the exciton (biexciton) binding energy of nanocrystals, originally () meV, decreases to () meV in and () meV in . Furthermore, we observe a reduction in the Auger recombination rate and exciton PL quenching in and , corroborating the charge transfer mechanism. Our systematic studies successfully describe photoexcited charge transfer from nanocrystals to GO (RGO) in () ps, which is one order of magnitude faster than the charge transfer for other acceptor materials such as metal oxide, fullerene, anthraquinone, 1-aminopyrene, and phenothiazine. Our results offer insights and guidance for perovskite-based high-performance optoelectronic devices.