Liang Wang
Research Subjects
Research Interests
Liang Wang has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
Bihan Wei
5 shared publicationsZhe Li
4 shared publications- Dian Wen Liu3 shared publications
Dianwen Liu
3 shared publicationsHan Wang
3 shared publications- Han Wang
State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Kunming University of Science and Technology, Kunming 650093, China
3 shared publications
Latest Publications
- Open Access
- 12 May 2026
- Published by Elsevier in SSRN Electronic Journal
Synergistic Activation of Copper Oxide in Copper smelting Slag by Sodium Sulfide and 2,5-Dimercapto-1,3,4-thiadiazole
The flotation performance and mechanism of the combination of sodium sulfide and 2,5-dimercapto-1,3,4-thiadiazole as a composite activator for CuO oxide in copper smelting slag, an important secondary resource, was investigated using pure CuO as a model sample. Density functional theory calculations revealed that sulfidization of the CuO surface reduced the stability of its hydration layer and that DMTD could be chemically adsorbed onto the pristine and sulfidized CuO surfaces. Zeta potential measurements, SEM-EDS, ToF-SIMS, and XPS demonstrate that sodium sulfide promoted DMTD adsorption onto the CuO surface. Compared with individual treatment, synergistic activation with sodium sulfide and DMTD led to the generation of more abundant and stable sulfide species on the CuO surface. FTIR and contact angle measurements confirmed that synergistic activation enhanced collector adsorption onto the CuO surface and strengthened its hydrophobicity. Microflotation outcomes showed that combining sodium sulfide with DMTD reduced the dosage required for DMTD when compared with DMTD used alone. Batch flotation tests on actual copper smelting slag showed that the sodium sulfide–DMTD composite activator increased the copper recovery from 92.07% to 95.36% compared with conventional sulfide-assisted flotation, confirming the efficient extraction of copper from copper smelting slag.
- 12 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSynergistic Activation of Copper Oxide in Copper smelting Slag by Sodium Sulfide and 2,5-Dimercapto-1,3,4-thiadiazole
The flotation performance and mechanism of the combination of sodium sulfide and 2,5-dimercapto-1,3,4-thiadiazole as a composite activator for CuO oxide in copper smelting slag, an important secondary resource, was investigated using pure CuO as a model sample. Density functional theory calculations revealed that sulfidization of the CuO surface reduced the stability of its hydration layer and that DMTD could be chemically adsorbed onto the pristine and sulfidized CuO surfaces. Zeta potential measurements, SEM-EDS, ToF-SIMS, and XPS demonstrate that sodium sulfide promoted DMTD adsorption onto the CuO surface. Compared with individual treatment, synergistic activation with sodium sulfide and DMTD led to the generation of more abundant and stable sulfide species on the CuO surface. FTIR and contact angle measurements confirmed that synergistic activation enhanced collector adsorption onto the CuO surface and strengthened its hydrophobicity. Microflotation outcomes showed that combining sodium sulfide with DMTD reduced the dosage required for DMTD when compared with DMTD used alone. Batch flotation tests on actual copper smelting slag showed that the sodium sulfide–DMTD composite activator increased the copper recovery from 92.07% to 95.36% compared with conventional sulfide-assisted flotation, confirming the efficient extraction of copper from copper smelting slag.
- Open Access
- 12 May 2026
- Published by Elsevier in SSRN Electronic Journal
Synergistic Activation of Copper Oxide in Copper smelting Slag by Sodium Sulfide and 2,5-Dimercapto-1,3,4-thiadiazole
The flotation performance and mechanism of the combination of sodium sulfide and 2,5-dimercapto-1,3,4-thiadiazole as a composite activator for CuO oxide in copper smelting slag, an important secondary resource, was investigated using pure CuO as a model sample. Density functional theory calculations revealed that sulfidization of the CuO surface reduced the stability of its hydration layer and that DMTD could be chemically adsorbed onto the pristine and sulfidized CuO surfaces. Zeta potential measurements, SEM-EDS, ToF-SIMS, and XPS demonstrate that sodium sulfide promoted DMTD adsorption onto the CuO surface. Compared with individual treatment, synergistic activation with sodium sulfide and DMTD led to the generation of more abundant and stable sulfide species on the CuO surface. FTIR and contact angle measurements confirmed that synergistic activation enhanced collector adsorption onto the CuO surface and strengthened its hydrophobicity. Microflotation outcomes showed that combining sodium sulfide with DMTD reduced the dosage required for DMTD when compared with DMTD used alone. Batch flotation tests on actual copper smelting slag showed that the sodium sulfide–DMTD composite activator increased the copper recovery from 92.07% to 95.36% compared with conventional sulfide-assisted flotation, confirming the efficient extraction of copper from copper smelting slag.
- 12 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSynergistic Activation of Copper Oxide in Copper smelting Slag by Sodium Sulfide and 2,5-Dimercapto-1,3,4-thiadiazole
The flotation performance and mechanism of the combination of sodium sulfide and 2,5-dimercapto-1,3,4-thiadiazole as a composite activator for CuO oxide in copper smelting slag, an important secondary resource, was investigated using pure CuO as a model sample. Density functional theory calculations revealed that sulfidization of the CuO surface reduced the stability of its hydration layer and that DMTD could be chemically adsorbed onto the pristine and sulfidized CuO surfaces. Zeta potential measurements, SEM-EDS, ToF-SIMS, and XPS demonstrate that sodium sulfide promoted DMTD adsorption onto the CuO surface. Compared with individual treatment, synergistic activation with sodium sulfide and DMTD led to the generation of more abundant and stable sulfide species on the CuO surface. FTIR and contact angle measurements confirmed that synergistic activation enhanced collector adsorption onto the CuO surface and strengthened its hydrophobicity. Microflotation outcomes showed that combining sodium sulfide with DMTD reduced the dosage required for DMTD when compared with DMTD used alone. Batch flotation tests on actual copper smelting slag showed that the sodium sulfide–DMTD composite activator increased the copper recovery from 92.07% to 95.36% compared with conventional sulfide-assisted flotation, confirming the efficient extraction of copper from copper smelting slag.
- Open Access
- 3 April 2026
- Published by Elsevier in SSRN Electronic Journal
Resource Recovery from Copper Smelting Slag: Pb2+ Modification of Sulfidized Copper Oxide Surfaces and Its Effects on Flotation Performance
Sulfidization–xanthate flotation is a conventional method for the recovery copper oxide from copper smelting slag. This study investigated the effects of Pb2+ treatment on xanthate adsorption on sulfidized CuO surfaces and flotation performance. Density functional theory and zeta potential analyses revealed the effective adsorption of Pb2+ on the sulfidized CuO surface, which positively shifted the surface potential and reduced the electrostatic repulsion between the sulfidized CuO surface and xanthate. The results of SEM-EDS, ToF-SIMS, and XPS tests indicated that the Pb2+ treatment promotes the formation of a lead sulfide layer on the sulfide layer of sulfidized CuO surface, enhancing the surface reactivity toward xanthate. Microcalorimetry and UV spectrophotometry analyses confirmed that the Pb2+ treatment improved the adsorption rate and capacity of xanthate on the sulfidized CuO surface. Microflotation experiments demonstrated that the Pb2+ treatment following sulfidization enhanced the recovery of pure CuO from 50% to 96%. Furthermore, copper smelting slag flotation tests revealed a considerable improvement in the recovery of copper oxide from slag, confirming that the Pb2+ treatment after sulfidization substantially enhanced the collection of copper oxide by xanthate and improved the flotation recovery of copper components from copper smelting slag.
- 3 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessResource Recovery from Copper Smelting Slag: Pb2+ Modification of Sulfidized Copper Oxide Surfaces and Its Effects on Flotation Performance
Sulfidization–xanthate flotation is a conventional method for the recovery copper oxide from copper smelting slag. This study investigated the effects of Pb2+ treatment on xanthate adsorption on sulfidized CuO surfaces and flotation performance. Density functional theory and zeta potential analyses revealed the effective adsorption of Pb2+ on the sulfidized CuO surface, which positively shifted the surface potential and reduced the electrostatic repulsion between the sulfidized CuO surface and xanthate. The results of SEM-EDS, ToF-SIMS, and XPS tests indicated that the Pb2+ treatment promotes the formation of a lead sulfide layer on the sulfide layer of sulfidized CuO surface, enhancing the surface reactivity toward xanthate. Microcalorimetry and UV spectrophotometry analyses confirmed that the Pb2+ treatment improved the adsorption rate and capacity of xanthate on the sulfidized CuO surface. Microflotation experiments demonstrated that the Pb2+ treatment following sulfidization enhanced the recovery of pure CuO from 50% to 96%. Furthermore, copper smelting slag flotation tests revealed a considerable improvement in the recovery of copper oxide from slag, confirming that the Pb2+ treatment after sulfidization substantially enhanced the collection of copper oxide by xanthate and improved the flotation recovery of copper components from copper smelting slag.
- 10 October 2023
- Published by Elsevier in Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Vol. 679
Surface modification of malachite using DMTD and its effect on xanthate adsorption
- 10 October 2023
- Published by Elsevier in Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Vol. 679
Surface modification of malachite using DMTD and its effect on xanthate adsorption