RWRan Wang

Ran Wang

*This is an algorithmically generated author record based on publicly available information.

Ran Wang has a total of 5 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Molecular dynamics study of ice melting on a silver plate

    by Ran Wang, Shaohong Cheng, David S.-K. Ting, Arash Raeesi, Sean McTavish, Annick D’AUteuil

    Ice fall incidents, such as detached ice chunks from bridge stay cables, pose not only serious safety hazards to pedestrians and vehicles below but also significant serviceability issues, as bridge closures required for inspection or ice removal can lead to costly disruptions. The current trend of climate change exacerbates this kind of hazard. The availability of a reliable engineering tool, such as an accurate numerical model grounded in nanoscale melt-front physics, is imperative to provide a clear insight into the ice detachment mechanism and develop effective de-icing solutions. Classical molecular dynamics simulations are conducted in the current study to investigate the melting of an ice cube in an atomically flat silver slab. The TIP4P/ice water model is adopted and the simulation is conducted in canonical ensemble with a layer-resolved Langevin thermostat. The phase evolution is tracked via the averaged tetrahedral order parameter, while systematically varying five controls: the depth of heated layers, the silver substrate thickness, the ice thickness, the lateral confinement, and the ice crystal contact orientation (basal vs prism). Results show that melting is controlled primarily by the substrate temperature; variations in heat-conducting-layer count had a minor influence and converged to similar end states. Doubling the ice thickness increases the melt time approximately by three times, whereas relaxing periodic boundaries reshapes the melt into domes or spreading films. Presenting the basal plane instead of a prism plane accelerates loss of crystalline order. Collectively, the simulations yield a numerically consistent set of parameters that not only advances the existing knowledge of nanoscale ice melting simulation but can also be transferred to continuum-scale de-icing simulations, enabling accurate modeling of melt-induced ice detachment from structural components, such as bridge stay cables.


  • Open Access

    Numerical study of flow characteristics around a 30° yawed circular cylinder at Re=104

    by Ran Wang, Shaohong Cheng, David S.-K. Ting

    Unstable motions of bridge stay cables have been observed on site and in wind tunnel tests when a cable is yawed at certain orientations to wind. To uncover the underlying mechanisms, flow around a circular cylinder at a yaw angle of 30° has been numerically analyzed in the current study using delayed detached eddy simulation (DDES) at Re=104. A comparison with the reference normal flow case indicates the presence of a more coherent span-wise flow structure when the cylinder is yawed at 30°. The application of proper orthogonal decomposition further reveals that at this orientation, a synchronized flow structure exists, which is characterized by continuous anti-symmetric pressure blocks. In addition, a low-frequency flow fluctuation has been identified, the Strouhal number of which is roughly a quarter of that of the conventional Kármán vortex shedding. The pivotal role of axial flow in the intermittent amplification of cylinder sectional lift and the subsequent span-wise propagation of this enhanced local lift event has been revealed. The former is evident from the low-frequency sectional lift peaks occurred during vortex shedding, whereas the propagation speed associated with the latter is in good agreement with the span-wise component of the incoming flow speed. The temporal and spatial impact of axial flow on the surrounding flow structure of the cylinder may serve as a periodic excitation source, which could trigger an unstable response of a cylinder. This, in the context of bridge stay cables, could possibly contribute to the onset mechanism of dry cable galloping.