Sumaya Tabassum
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sumaya Tabassum has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Asif Ahmed
Ahsanullah University of Science and Technology
1 shared publication - Asif Ahmed
Ahsanullah University of Science and Technology, Bangladesh
1 shared publication - Debo Brata Paul Argha
Texas State University
1 shared publication - Jinat Tasnim Dristy
Junior Engineer, Development Design Consultants Ltd., Bangladesh
1 shared publication - Jinat Tasnim Dri̇sty
Ahsanullah University of Science and Technology
1 shared publication - Maliha Mehjabin
Chittagong University of Engineering & Technology, Bangladesh
1 shared publication
Latest Publications
- Open Access
- 28 May 2025
- Published by MDPI AG in Preprints.org
Recent Advancements in Per- and Polyfluoroalkyl Substances (PFAS) Detection by Sensors and Surface-Enhanced Raman Scattering (SERS) Method: A Review
Per- and polyfluoroalkyl substances (PFAS), a large group of developing contaminants, have recently become the subject of increased concern due to their potentially hazardous effects. They are classified as poisonous substances that can be found in a variety of aquatic situations. The widespread usage of PFAS across numerous industries has resulted in a high environmental and biological accumulation of the substance. Identification and elimination of PFAS from the environment is crucial since they are tenacious and have the potential to cause cancer. Traditional methods of PFAS content assessment, while useful in some cases, are often inadequate for continuing environmental control and monitoring. Within academia, there is a noticeable desire for rapid, cost-effective, durable, and readily transportable techniques targeted at detecting PFAS compounds in field settings. As a result, environmental labs and other governmental and non-governmental bodies may start testing more often as mandated by legislation. PFAS-detecting sensors, which offer an innovative solution that can be applied in situ and is affordable and simple to use, have emerged as a promising method for assessment based on the existing research. In addition, it may give administrators and users of water worldwide useful information they can use. This article provides a thorough summary of recent developments, limitations, and performance considerations in PFAS detection sensors. The Surface-enhanced Raman scattering (SERS) method has also been covered because of its excellent sensitivity and specificity for detecting pollutants, making it a potential solution for sensing PFAS. Intelligent sensing systems for PFAS detection should benefit from this research.
- 28 May 2025
- Published by MDPI AG in Preprints.org
Open AccessRecent Advancements in Per- and Polyfluoroalkyl Substances (PFAS) Detection by Sensors and Surface-Enhanced Raman Scattering (SERS) Method: A Review
Per- and polyfluoroalkyl substances (PFAS), a large group of developing contaminants, have recently become the subject of increased concern due to their potentially hazardous effects. They are classified as poisonous substances that can be found in a variety of aquatic situations. The widespread usage of PFAS across numerous industries has resulted in a high environmental and biological accumulation of the substance. Identification and elimination of PFAS from the environment is crucial since they are tenacious and have the potential to cause cancer. Traditional methods of PFAS content assessment, while useful in some cases, are often inadequate for continuing environmental control and monitoring. Within academia, there is a noticeable desire for rapid, cost-effective, durable, and readily transportable techniques targeted at detecting PFAS compounds in field settings. As a result, environmental labs and other governmental and non-governmental bodies may start testing more often as mandated by legislation. PFAS-detecting sensors, which offer an innovative solution that can be applied in situ and is affordable and simple to use, have emerged as a promising method for assessment based on the existing research. In addition, it may give administrators and users of water worldwide useful information they can use. This article provides a thorough summary of recent developments, limitations, and performance considerations in PFAS detection sensors. The Surface-enhanced Raman scattering (SERS) method has also been covered because of its excellent sensitivity and specificity for detecting pollutants, making it a potential solution for sensing PFAS. Intelligent sensing systems for PFAS detection should benefit from this research.
- 30 June 2024
- Published by Echo Academic Publishing in Environmental Research and Technology
- Vol. 7 (2) , 233-255
Impact of dissolved organic nitrogen (DON) to the formation of disinfection byproducts (DBP) during water/wastewater treatment: A review
Disinfection byproduct (DBP) formation during water and wastewater treatment is a concern for public health and environmental preservation. Dissolved organic nitrogen (DON) serves as a recognized precursor to DBP formation, which can potentially jeopardize human health. This review article offers a comprehensive insight into DON's influence on DBP formation during water and wastewater treatment processes. It delves into DON's sources, properties, and concentrations in water and wastewater, underlining the variability dependent on water source and environmental conditions. The mechanisms of DBP formation from DON, encompassing formation pathways and influencing factors, are meticulously examined. Different treatment methods, like chlorination, ozonation, and UV disinfection, are carefully examined to see how they affect the formation of DON and DBP. Factors that sway DON's impact on DBP formation are also explored. The review also presents various DBP reduction techniques, spanning physical, chemical, and biological treatment methods, their efficacy in curtailing DON's influence, and their potential pros and cons. It addresses challenges, outlines future research directions, identifies knowledge gaps, and highlights the necessity for regulatory measures and policies, providing recommendations for prospective research avenues. It is clear from this in-depth review that more research is needed to understand how DON affects the formation of DBP entirely. It is also essential to protect human health and the environment and follow the rules first when treating wastewater. In conclusion, it analyzes DON's part in forming DBP in water and wastewater treatment. This emphasizes the need for ongoing research and mitigation strategies to protect public health and water quality.
- 30 June 2024
- Published by Echo Academic Publishing in Environmental Research and Technology
- Vol. 7 (2) , 233-255
Impact of dissolved organic nitrogen (DON) to the formation of disinfection byproducts (DBP) during water/wastewater treatment: A review
Disinfection byproduct (DBP) formation during water and wastewater treatment is a concern for public health and environmental preservation. Dissolved organic nitrogen (DON) serves as a recognized precursor to DBP formation, which can potentially jeopardize human health. This review article offers a comprehensive insight into DON's influence on DBP formation during water and wastewater treatment processes. It delves into DON's sources, properties, and concentrations in water and wastewater, underlining the variability dependent on water source and environmental conditions. The mechanisms of DBP formation from DON, encompassing formation pathways and influencing factors, are meticulously examined. Different treatment methods, like chlorination, ozonation, and UV disinfection, are carefully examined to see how they affect the formation of DON and DBP. Factors that sway DON's impact on DBP formation are also explored. The review also presents various DBP reduction techniques, spanning physical, chemical, and biological treatment methods, their efficacy in curtailing DON's influence, and their potential pros and cons. It addresses challenges, outlines future research directions, identifies knowledge gaps, and highlights the necessity for regulatory measures and policies, providing recommendations for prospective research avenues. It is clear from this in-depth review that more research is needed to understand how DON affects the formation of DBP entirely. It is also essential to protect human health and the environment and follow the rules first when treating wastewater. In conclusion, it analyzes DON's part in forming DBP in water and wastewater treatment. This emphasizes the need for ongoing research and mitigation strategies to protect public health and water quality.
- 31 March 2024
- Published by Echo Academic Publishing in Environmental Research and Technology
- Vol. 7 (1) , 41-60
Assessment of tube well water quality in selected residential areas in Khulna
Clean water is vital for sustainable development, fostering socio-economic growth, ecological stability, and human survival. The study aimed to evaluate the quality of tube well water in specific residential areas of Khulna for drinking purposes, comparing it with the standards of World Health Organization (WHO) and Bangladesh (BD). Twenty tube well water samples were collected from residential areas at depths of 700-1500 ft. The samples were tasted with about 20 parameters, including physical: color, taste, odor, total dissolved solids (TDS) and total suspended solids (TSS); chemical: acidity/alkalinity (pH), arsenic (As), electrical conductivity (EC), dissolved oxygen (DO), bicarbonate (HCO3–), calcium (Ca2+), magnesium (Mg2+), sodium (Na+), chloride (Cl–), iron (Fe), phosphate (PO43–), sulfate (SO42–), potassium (K+); and bacteriological parameters: total coliforms and E. coli bacteria. Most of the samples were found to have higher TDS (avg. 1380 mg/L), TSS (avg. 620 mg/L), Fe (avg. 20.2 mg/L), K+ (avg. 194.1 mg/L), and Na+ (avg. 439 mg/L) concentrations compared to the WHO and BD Standards. 90 to 95% of samples exhibited acceptable levels of EC, pH, DO, Mg2+, Ca2+, Cl–, and SO43–. The salinity levels in most of the samples were excessive to be used for drinking, and the levels were especially very high in samples S-01(Na+ 820 and Cl- 3195 mg/L) and S-04 (Na+ 660 and Cl- 2946 mg/L). The arsenic levels were found to be higher than acceptable limit in S-01 (0.086 mg/L) and S-04 (0.091 mg/L) as well. E. coli and other bacteria in a few samples (S-01, 04, 13, 16, 17, 19) were detected.
- 31 March 2024
- Published by Echo Academic Publishing in Environmental Research and Technology
- Vol. 7 (1) , 41-60
Assessment of tube well water quality in selected residential areas in Khulna
Clean water is vital for sustainable development, fostering socio-economic growth, ecological stability, and human survival. The study aimed to evaluate the quality of tube well water in specific residential areas of Khulna for drinking purposes, comparing it with the standards of World Health Organization (WHO) and Bangladesh (BD). Twenty tube well water samples were collected from residential areas at depths of 700-1500 ft. The samples were tasted with about 20 parameters, including physical: color, taste, odor, total dissolved solids (TDS) and total suspended solids (TSS); chemical: acidity/alkalinity (pH), arsenic (As), electrical conductivity (EC), dissolved oxygen (DO), bicarbonate (HCO3–), calcium (Ca2+), magnesium (Mg2+), sodium (Na+), chloride (Cl–), iron (Fe), phosphate (PO43–), sulfate (SO42–), potassium (K+); and bacteriological parameters: total coliforms and E. coli bacteria. Most of the samples were found to have higher TDS (avg. 1380 mg/L), TSS (avg. 620 mg/L), Fe (avg. 20.2 mg/L), K+ (avg. 194.1 mg/L), and Na+ (avg. 439 mg/L) concentrations compared to the WHO and BD Standards. 90 to 95% of samples exhibited acceptable levels of EC, pH, DO, Mg2+, Ca2+, Cl–, and SO43–. The salinity levels in most of the samples were excessive to be used for drinking, and the levels were especially very high in samples S-01(Na+ 820 and Cl- 3195 mg/L) and S-04 (Na+ 660 and Cl- 2946 mg/L). The arsenic levels were found to be higher than acceptable limit in S-01 (0.086 mg/L) and S-04 (0.091 mg/L) as well. E. coli and other bacteria in a few samples (S-01, 04, 13, 16, 17, 19) were detected.
- Open Access
- 19 October 2023
- Published by MDPI AG in Preprints.org
An Investigation into the Efficacy of Septic Tank Systems in Removing Organics in a Subtropical Climate
An estimated 38 million individuals, out of a total population of around 126 million, reside in urban areas of Bangladesh. The surge in urbanization and water consumption has led to a significant rise in waterborne sanitation systems within the country. One cost-effective solution for wastewater treatment is the utilization of septic tanks, which operate as anaerobic reactors, with their efficiency being closely tied to temperature conditions. This research focuses on evaluating the organic removal capabilities of a septic tank located on the Khulna University of Engineering and Technology (KUET) campus. The results show that a septic tank's ability to remove organic matter depends on the temperature, with higher temperatures making the removal process more effective. Additionally, the Total Suspended Solids (TSS) levels were observed within a range of 110–280 mg/L, 200–1030 mg/L, 160–880 mg/L, and 190–220 mg/L for the 1st, 2nd, and 3rd chambers, respectively. The maximum recorded pH values were 7.14, 7.13, and 7.11, while the minimum pH values were 7.06, 7.05, and 7.04, corresponding to the same chambers. Furthermore, the organic removal efficiency concerning dissolved oxygen (DO), nitrate (NO3-N), and pH levels remained within acceptable limits. These results suggest that a simple treatment unit like a septic tank can effectively render previously unacceptable and unhygienic water suitable for safe disposal and potential reuse, ultimately improving the management of septic tank wastewater.
- 19 October 2023
- Published by MDPI AG in Preprints.org
Open AccessAn Investigation into the Efficacy of Septic Tank Systems in Removing Organics in a Subtropical Climate
An estimated 38 million individuals, out of a total population of around 126 million, reside in urban areas of Bangladesh. The surge in urbanization and water consumption has led to a significant rise in waterborne sanitation systems within the country. One cost-effective solution for wastewater treatment is the utilization of septic tanks, which operate as anaerobic reactors, with their efficiency being closely tied to temperature conditions. This research focuses on evaluating the organic removal capabilities of a septic tank located on the Khulna University of Engineering and Technology (KUET) campus. The results show that a septic tank's ability to remove organic matter depends on the temperature, with higher temperatures making the removal process more effective. Additionally, the Total Suspended Solids (TSS) levels were observed within a range of 110–280 mg/L, 200–1030 mg/L, 160–880 mg/L, and 190–220 mg/L for the 1st, 2nd, and 3rd chambers, respectively. The maximum recorded pH values were 7.14, 7.13, and 7.11, while the minimum pH values were 7.06, 7.05, and 7.04, corresponding to the same chambers. Furthermore, the organic removal efficiency concerning dissolved oxygen (DO), nitrate (NO3-N), and pH levels remained within acceptable limits. These results suggest that a simple treatment unit like a septic tank can effectively render previously unacceptable and unhygienic water suitable for safe disposal and potential reuse, ultimately improving the management of septic tank wastewater.