Wangsuo Cai
Research Subjects
Wangsuo Cai has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Chenjie Jiang
College of Water Conservancy and Hydropower Engineering, Sichuan Agricultural University, Yaan 625014, China
1 shared publication - Dong Yang
Chengdu Huajian Geological Engineering Technology Co., Ltd, Chengdu 611734, China
1 shared publication - Duoji Renqing
College of Water Conservancy and Hydropower Engineering, Sichuan Agricultural University, Yaan 625014, China
1 shared publication - Hong-Qiang Xie
State Key Laboratory of Hydraulics and Mountain River Engineering, College of Water Resource and Hydropower, Sichuan University, Chengdu 610065, China
1 shared publication - Huai-Zhong Liu
State Key Laboratory of Hydraulics and Mountain River Engineering, College of Water Resource and Hydropower, Sichuan University, Chengdu 610065, China
1 shared publication - Jiang-Da He
State Key Laboratory of Hydraulics and Mountain River Engineering, College of Water Resource and Hydropower, Sichuan University, Chengdu 610065, China
1 shared publication
Latest Publications
- Open Access
- 30 October 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (21) , 9690
A Numerical Simulation Study on the Critical Erosion of Laboratory-Scale Debris Flow
Debris flow erosion is key to the escalation of potential hazards, which may jeopardize the sustainable development of nearby human habitats. However, studies pertaining to this issue are impeded by the intricate interactions of flow and sediment. Thus, this study introduces an unresolved CFD-DEM coupled simulation primarily relying on a classical numerical simulation and a physical experiment to study the critical erosion process of debris flows on a dry basal sediment under laboratory scale. Results indicate that three layers of substrate bed can be verified during the erosion process, and there is a positive correlation between the erosion depth and the particle size with the Froude number of debris flow, as well as between the erosion length and the critical entrainment transport with the total mass of debris flow. In addition, thresholds for the collisional point load and the impact energy of debris flow head, which are essential for predicting the attenuating rates of erosive depth and the critical entrainment transport, have been proposed based on data regressions derived from power functions. The coupled numerical approach is capable of accurately simulating the erosion behavior of debris flows similarly to physical model experiments, thereby providing both theoretical and practical insights into the dynamics of erosion.
- 30 October 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (21) , 9690
Open AccessA Numerical Simulation Study on the Critical Erosion of Laboratory-Scale Debris Flow
Debris flow erosion is key to the escalation of potential hazards, which may jeopardize the sustainable development of nearby human habitats. However, studies pertaining to this issue are impeded by the intricate interactions of flow and sediment. Thus, this study introduces an unresolved CFD-DEM coupled simulation primarily relying on a classical numerical simulation and a physical experiment to study the critical erosion process of debris flows on a dry basal sediment under laboratory scale. Results indicate that three layers of substrate bed can be verified during the erosion process, and there is a positive correlation between the erosion depth and the particle size with the Froude number of debris flow, as well as between the erosion length and the critical entrainment transport with the total mass of debris flow. In addition, thresholds for the collisional point load and the impact energy of debris flow head, which are essential for predicting the attenuating rates of erosive depth and the critical entrainment transport, have been proposed based on data regressions derived from power functions. The coupled numerical approach is capable of accurately simulating the erosion behavior of debris flows similarly to physical model experiments, thereby providing both theoretical and practical insights into the dynamics of erosion.
- Open Access
- 18 October 2023
- Published by Wiley in Advances in Civil Engineering
- Vol. 2023, 1-11
Borehole TV Imaging Technology for Horizontal Directional Drilling Based on an Optimization Algorithm for Structural Planes
The horizontal directional drilling technology combined with the borehole TV imaging technology can be used to obtain most of the geological information in conventional adit exploration. This combination has little impact on the environment and is free from topographic constraints, thus contributing to green exploration. However, conventional algorithms for structural planes fail to accurately extract information on the attitudes of incomplete structural planes in boreholes of any azimuth. Moreover, existing borehole TV devices are mostly cable-based and, thus, difficult to put in place in horizontal drilling. They are prone to get stuck in the collapse section of boreholes, thus damaging the devices. Given these challenges, this study develops an optimization algorithm for structural planes: (1) first, information on multiple points in the 2D unfolded view is fitted using a sinusoidal function curve, three arbitrary points are constructed using the fitted curve, and the normal vector of the plane determined by the three points is calculated; (2) the normal vector in the geodetic coordinate system is obtained after two rotations of the spatial coordinate system based on the theory of transformation of Cartesian coordinate system; (3) finally, the dip angle and dip direction of a structural plane are calculated using the normal vector in the geodetic coordinate system. By making the best use of the information on multiple points in the 2D unfolded view, the optimization algorithm can overcome the defect that is difficult for conventional two-point methods to locate the highest and lowest points of discontinuous structural planes. Therefore, the optimization algorithm applies to calculating the attitudes of structural planes in boreholes of any azimuth. Based on this optimization algorithm, this study successfully develops a cable-free, storage-based TV device for boreholes of any azimuth. This device was employed for laboratory experiments on 20 complete structural planes and 32 incomplete structural planes. As indicated by the experiment results, the optimization algorithm proposed in this study is applicable to many types of structural planes, with a dip direction error of less than 10° and a dip angle error of less than 5°, thus meeting the production requirements.
- 18 October 2023
- Published by Wiley in Advances in Civil Engineering
- Vol. 2023, 1-11
Open AccessBorehole TV Imaging Technology for Horizontal Directional Drilling Based on an Optimization Algorithm for Structural Planes
The horizontal directional drilling technology combined with the borehole TV imaging technology can be used to obtain most of the geological information in conventional adit exploration. This combination has little impact on the environment and is free from topographic constraints, thus contributing to green exploration. However, conventional algorithms for structural planes fail to accurately extract information on the attitudes of incomplete structural planes in boreholes of any azimuth. Moreover, existing borehole TV devices are mostly cable-based and, thus, difficult to put in place in horizontal drilling. They are prone to get stuck in the collapse section of boreholes, thus damaging the devices. Given these challenges, this study develops an optimization algorithm for structural planes: (1) first, information on multiple points in the 2D unfolded view is fitted using a sinusoidal function curve, three arbitrary points are constructed using the fitted curve, and the normal vector of the plane determined by the three points is calculated; (2) the normal vector in the geodetic coordinate system is obtained after two rotations of the spatial coordinate system based on the theory of transformation of Cartesian coordinate system; (3) finally, the dip angle and dip direction of a structural plane are calculated using the normal vector in the geodetic coordinate system. By making the best use of the information on multiple points in the 2D unfolded view, the optimization algorithm can overcome the defect that is difficult for conventional two-point methods to locate the highest and lowest points of discontinuous structural planes. Therefore, the optimization algorithm applies to calculating the attitudes of structural planes in boreholes of any azimuth. Based on this optimization algorithm, this study successfully develops a cable-free, storage-based TV device for boreholes of any azimuth. This device was employed for laboratory experiments on 20 complete structural planes and 32 incomplete structural planes. As indicated by the experiment results, the optimization algorithm proposed in this study is applicable to many types of structural planes, with a dip direction error of less than 10° and a dip angle error of less than 5°, thus meeting the production requirements.
- Open Access
Experimental Study on the Dilatancy and Energy Evolution Behaviors of Red-Bed Rocks under Unloading Conditions
Surrounding rock deformation and consequent support failure are the most prominent issues in red-bed rock tunnel engineering and are mainly caused by the effects of unloading, rheology, and swelling. This study investigated the mechanical responses of two kinds of red-bed mudstone and sandstone under unloading conditions via laboratory observation. Volume dilation was observed on the rocks during unloading, and the dilatancy stress was linear with the initial confining pressure. However, the ratios of dilatancy stress to peak stress of the two rocks kept at a range from 0.8 to 0.9, regardless of confining pressures. Both the elastic strain energy and the dissipated energy evolved synchronously with the stress–strain curve and exhibited conspicuous confining pressure dependence. Special attention was paid to the evolution behavior of the dilatancy angle. The dilatancy angle changed linearly during unloading. When the confining pressure was 10 MPa, the dilatancy angle of mudstone decreased from 26.8° to 12.5° whereas the dilatancy angle of sandstone increased from 34.6° to 51.1°; when the confining pressure rose to 25 MPa, the dilatancy angle of mudstone and sandstone decreased from 45.8° to 17.4° and increased from 21.7° to 39.5°, respectively. To further understand the evolution of the dilatancy angle, we discussed the links between the variable dilatancy angle and the processes of rock deformation and energy dissipation.
Open AccessExperimental Study on the Dilatancy and Energy Evolution Behaviors of Red-Bed Rocks under Unloading Conditions
Surrounding rock deformation and consequent support failure are the most prominent issues in red-bed rock tunnel engineering and are mainly caused by the effects of unloading, rheology, and swelling. This study investigated the mechanical responses of two kinds of red-bed mudstone and sandstone under unloading conditions via laboratory observation. Volume dilation was observed on the rocks during unloading, and the dilatancy stress was linear with the initial confining pressure. However, the ratios of dilatancy stress to peak stress of the two rocks kept at a range from 0.8 to 0.9, regardless of confining pressures. Both the elastic strain energy and the dissipated energy evolved synchronously with the stress–strain curve and exhibited conspicuous confining pressure dependence. Special attention was paid to the evolution behavior of the dilatancy angle. The dilatancy angle changed linearly during unloading. When the confining pressure was 10 MPa, the dilatancy angle of mudstone decreased from 26.8° to 12.5° whereas the dilatancy angle of sandstone increased from 34.6° to 51.1°; when the confining pressure rose to 25 MPa, the dilatancy angle of mudstone and sandstone decreased from 45.8° to 17.4° and increased from 21.7° to 39.5°, respectively. To further understand the evolution of the dilatancy angle, we discussed the links between the variable dilatancy angle and the processes of rock deformation and energy dissipation.