Yongsheng Ma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yongsheng Ma has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Guobao Zhang
School of Automation, Southeast University, Nanjing 210096, China
3 shared publications - Dimka Karastoyanova
University of Groningen
2 shared publications - Wen Shi
School of Automation Engineering, Southeast University, Nanjing, China
2 shared publications - Yongming Huang
Southeast University
2 shared publications - Yongming Huang
School of Automation, Southeast University, Nanjing 210018, China
2 shared publications - Guobao Zhang
School of Automation, Southeast University, Nanjing, China
1 shared publication
Latest Publications
- Open Access
- 20 May 2026
- Published by MDPI AG in Technologies
- Vol. 14 (5) , 310
Sensor-Health- and Belief-Aware Risk-Adaptive High-Order Control Barrier Function Safety Filtering for Dynamic Obstacle Avoidance
Control-barrier-function-based safety filters are promising for autonomous driving, but most existing formulations treat obstacle perception as deterministic or account only for bounded ego state-estimation errors. This becomes limiting when obstacle existence, position, motion, and sensing quality vary online. We present a sensor-health- and belief-aware risk-adaptive high-order control barrier function (HOCBF) safety filter for dynamic obstacle avoidance. The method uses obstacle belief from a perception/tracking module, inflates residual obstacle uncertainty according to an object-wise sensor-health score, and converts upper-tail risk into adaptive HOCBF tightening through conditional value-at-risk (CVaR). Sensor health enters the controller through both covariance inflation and online CVaR confidence scheduling. The resulting quadratic program combines deterministic ego-error robustness with probabilistic perception uncertainty while minimally modifying the nominal control input. The zero-slack solution guarantees forward invariance of the risk-tightened safe set under the stated assumptions, whereas the slack-activated mode provides a quantified least-violation fallback rather than a strict safety guarantee. Simulations on a nonlinear 3-DOF bicycle model evaluate critical cut-in, sudden perception degradation, merge-bottleneck, fixed-CVaR, sensitivity, runtime-scaling, heterogeneous multi-obstacle, and heavy-tailed uncertainty cases.
- 20 May 2026
- Published by MDPI AG in Technologies
- Vol. 14 (5) , 310
Open AccessSensor-Health- and Belief-Aware Risk-Adaptive High-Order Control Barrier Function Safety Filtering for Dynamic Obstacle Avoidance
Control-barrier-function-based safety filters are promising for autonomous driving, but most existing formulations treat obstacle perception as deterministic or account only for bounded ego state-estimation errors. This becomes limiting when obstacle existence, position, motion, and sensing quality vary online. We present a sensor-health- and belief-aware risk-adaptive high-order control barrier function (HOCBF) safety filter for dynamic obstacle avoidance. The method uses obstacle belief from a perception/tracking module, inflates residual obstacle uncertainty according to an object-wise sensor-health score, and converts upper-tail risk into adaptive HOCBF tightening through conditional value-at-risk (CVaR). Sensor health enters the controller through both covariance inflation and online CVaR confidence scheduling. The resulting quadratic program combines deterministic ego-error robustness with probabilistic perception uncertainty while minimally modifying the nominal control input. The zero-slack solution guarantees forward invariance of the risk-tightened safe set under the stated assumptions, whereas the slack-activated mode provides a quantified least-violation fallback rather than a strict safety guarantee. Simulations on a nonlinear 3-DOF bicycle model evaluate critical cut-in, sudden perception degradation, merge-bottleneck, fixed-CVaR, sensitivity, runtime-scaling, heterogeneous multi-obstacle, and heavy-tailed uncertainty cases.
- Open Access
- 20 May 2026
- Published by MDPI AG in Technologies
- Vol. 14 (5) , 309
Robust Integration of Fault-Tolerant Observer and CBF Safety Control: A Separation Principle Approach
Autonomous vehicles must enforce safety constraints even when their state estimates are corrupted by sensor faults and disturbances. This paper develops a separation-based robust safety-control framework that couples a fault-tolerant observer with a control barrier function (CBF) safety filter through an explicit estimation-error envelope. First, a uniformly ultimately bounded observer-error estimate is derived. This bound is then injected into an estimated-state robust CBF condition, yielding safety margins that account for both observation error and bounded disturbances. The construction is further extended to time-varying safe sets induced by moving obstacles. For implementation, the resulting condition is realized as a quadratic-program safety filter with high-order obstacle and lane constraints. Simulations on a nonlinear 3-DOF bicycle model evaluate bias faults, gust-like disturbances, dense traffic, and tightened stress tests. Compared with a standard CBF baseline and observer/safety-filter ablations, the proposed method preserves nonnegative safety margins while keeping slack activation negligible. Additional sensitivity experiments quantify the trade-off among safety margin, slack usage, observer accuracy, control conservatism, and QP computation time. The results support the proposed architecture as a practical bridge between bounded state estimation and fault-aware safety filtering.
- 20 May 2026
- Published by MDPI AG in Technologies
- Vol. 14 (5) , 309
Open AccessRobust Integration of Fault-Tolerant Observer and CBF Safety Control: A Separation Principle Approach
Autonomous vehicles must enforce safety constraints even when their state estimates are corrupted by sensor faults and disturbances. This paper develops a separation-based robust safety-control framework that couples a fault-tolerant observer with a control barrier function (CBF) safety filter through an explicit estimation-error envelope. First, a uniformly ultimately bounded observer-error estimate is derived. This bound is then injected into an estimated-state robust CBF condition, yielding safety margins that account for both observation error and bounded disturbances. The construction is further extended to time-varying safe sets induced by moving obstacles. For implementation, the resulting condition is realized as a quadratic-program safety filter with high-order obstacle and lane constraints. Simulations on a nonlinear 3-DOF bicycle model evaluate bias faults, gust-like disturbances, dense traffic, and tightened stress tests. Compared with a standard CBF baseline and observer/safety-filter ablations, the proposed method preserves nonnegative safety margins while keeping slack activation negligible. Additional sensitivity experiments quantify the trade-off among safety margin, slack usage, observer accuracy, control conservatism, and QP computation time. The results support the proposed architecture as a practical bridge between bounded state estimation and fault-aware safety filtering.
- 22 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1
Erratum to “Clustering-Based Granular Representation of Time Series With Application to Collective Anomaly Detection”
In the above article [1] , the important technical background was inadvertently omitted in Section III, “Similarity Measurement of Granular Time Series.” This omission may have led to a lack of clarity and could have impacted the readers’ understanding of the methodological foundation of our research.
- 22 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1
Erratum to “Clustering-Based Granular Representation of Time Series With Application to Collective Anomaly Detection”
In the above article [1] , the important technical background was inadvertently omitted in Section III, “Similarity Measurement of Granular Time Series.” This omission may have led to a lack of clarity and could have impacted the readers’ understanding of the methodological foundation of our research.
- 18 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-12
Clustering-Based Granular Representation of Time Series With Application to Collective Anomaly Detection
Efficient anomaly detection is at the forefront of ensuring optimized operations and system safety, especially in the field of engineering. It is deemed indispensable for the enhancement of work efficiency, maximization of resource utilization, and proactive addressal of potential risks. From this practical perspective, a new method for granular representation of time series data is proposed in this study and is validated through a collective anomaly detection task. The density peak clustering (DPC) algorithm is employed to evaluate clusters in two-dimensional (2-D) data, which are created from the original dataset and its variations. Using the principle of justifiable granularity, each cluster is depicted, allowing the time series to be converted into rectangular information granules. A distinctive similarity measure, designed to assess the similarity among subsequences in this format, is then introduced, with subsequences having reduced similarity being pinpointed as anomalies. Extensive testing on various datasets confirms that the effectiveness and applicability of the proposed method are evident in real-world scenarios. This approach not only enhances the understanding of time series patterns but is also recognized for its prominence in engineering applications where precise anomaly detection is demanded. Due to its ability to capture the inherent structure of time series and analyze the correlation among data, superior effectiveness is consistently exhibited by the proposed approach when compared to other existing methods.
- 18 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-12
Clustering-Based Granular Representation of Time Series With Application to Collective Anomaly Detection
Efficient anomaly detection is at the forefront of ensuring optimized operations and system safety, especially in the field of engineering. It is deemed indispensable for the enhancement of work efficiency, maximization of resource utilization, and proactive addressal of potential risks. From this practical perspective, a new method for granular representation of time series data is proposed in this study and is validated through a collective anomaly detection task. The density peak clustering (DPC) algorithm is employed to evaluate clusters in two-dimensional (2-D) data, which are created from the original dataset and its variations. Using the principle of justifiable granularity, each cluster is depicted, allowing the time series to be converted into rectangular information granules. A distinctive similarity measure, designed to assess the similarity among subsequences in this format, is then introduced, with subsequences having reduced similarity being pinpointed as anomalies. Extensive testing on various datasets confirms that the effectiveness and applicability of the proposed method are evident in real-world scenarios. This approach not only enhances the understanding of time series patterns but is also recognized for its prominence in engineering applications where precise anomaly detection is demanded. Due to its ability to capture the inherent structure of time series and analyze the correlation among data, superior effectiveness is consistently exhibited by the proposed approach when compared to other existing methods.
- 10 August 2023
- Published by Springer Nature in International Journal of Fuzzy Systems
- Vol. 25 (8) , 3162-3176
A New Approach to Fault Estimation of Discrete-Time Markov Jump Fuzzy Systems with Iterative Current Observers
- 10 August 2023
- Published by Springer Nature in International Journal of Fuzzy Systems
- Vol. 25 (8) , 3162-3176
A New Approach to Fault Estimation of Discrete-Time Markov Jump Fuzzy Systems with Iterative Current Observers
- Open Access
- 22 June 2015
- Published by U-turn Press LLC
- p. 171-176
CAD/CAE Associative Features for Cyclic Fluid Control Effect Modeling
- 22 June 2015
- Published by U-turn Press LLC
- p. 171-176
Open AccessCAD/CAE Associative Features for Cyclic Fluid Control Effect Modeling